Observing exoplanets from Antarctica in two colours: Set-up and operation of ASTEP+

François-Xavier Schmider; Lyu Abe; Abdelkrim Agabi; Philippe Bendjoya; Nicolas Crouzet; Georgina Dransfield; Tristan Guillot; Olivier Lai; Djamel Mekarnia; Olga Suarez; Amaury H. M. J. Triaud; Philippe Stee; Maximilian N. Günther; Dennis Breeveld; Sander Blommaert

doi:10.1117/12.2628952

arXiv · 2305.08454

Observing exoplanets from Antarctica in two colours: Set-up and operation of ASTEP+

François-Xavier Schmider·Lyu Abe·Abdelkrim Agabi·Philippe Bendjoya·Nicolas Crouzet·Georgina Dransfield·Tristan Guillot·Olivier Lai·Djamel Mekarnia·Olga Suarez·Amaury H. M. J. Triaud·Philippe Stee·Maximilian N. Günther·Dennis Breeveld·Sander Blommaert

View original source ↗Read source document ↗Export metadata ↓

Abstract

On December 2021, a new camera box for two-colour simultaneous visible photometry was successfully installed on the ASTEP telescope at the Concordia station in Antarctica. The new focal box offers increased capabilities for the ASTEP+ project. The opto-mechanical design of the camera was described in a previous paper. Here, we focus on the laboratory tests of each of the two cameras, the low-temperature behaviour of the focal box in a thermal chamber, the on-site installation and alignment of the new focal box on the telescope, the measurement of the turbulence in the tube and the operation of the telescope equipped with the new focal box. We also describe the data acquisition and the telescope guiding procedure and provide a first assessment of the performances reached during the first part of the 2022 observation campaign. Observations of the WASP19 field, already observed previously with ASTEP, demonstrates an improvement of the SNR by a factor 1.7, coherent with an increased number of photon by a factor of 3. The throughput of the two cameras is assessed both by calculation of the characteristics of the optics and quantum efficiency of the cameras, and by direct observations on the sky. We find that the ASTEP+ two-colour transmission curves (with a dichroic separating the fluxes at 690nm) are similar to those of GAIA in the blue and red channels, but with a lower transmission in the ASTEP+ red channel leading to a 1.5 magnitude higher B-R value compared to the GAIA B-R value. With this new setting, the ASTEP+ telescope will ensure the follow-up and the characterization of a large number of exoplanetary transits in the coming years in view of the future space missions JWST and Ariel.

Explore related subjects

astro-ph.IM astro-ph.EP

Keep this discovery

BibTeX RIS

François-Xavier Schmider, Lyu Abe, Abdelkrim Agabi, Philippe Bendjoya, Nicolas Crouzet, Georgina Dransfield, Tristan Guillot, Olivier Lai, Djamel Mekarnia, Olga Suarez, Amaury H. M. J. Triaud, Philippe Stee, Maximilian N. Günther, Dennis Breeveld, Sander Blommaert. 2023-05-15. Observing exoplanets from Antarctica in two colours: Set-up and operation of ASTEP+. https://doi.org/10.1117/12.2628952

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗

arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗

arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗