Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2310.11456

Innovative NiAl Electrodes for Long-Term, Intermediate High-Temperature SAW Sensing Applications Using LiNbO$_3$ Substrates

Jordan Maufay·Baptiste Paulmier·Mélanie Emo·Ulrich Youbi·Esther Mbina·Thierry Aubert·Ninel Kokanyan·Sami Hage-Ali·Michel Vilasi·Omar Elmazria
View original source ↗Read source document ↗Export metadata ↓

Abstract

Wireless SAW reflective delay line (R-DL) technology is very powerful to carry out remote measurements of various parameters under harsh environments, while enabling the identification of a given sensor among several of them. However, R-DL technology is currently limited to 350$^\circ$C for long-term applications, likely because of aluminium electrodes oxidation and/or congruent lithium niobate segregation process. In this study, an innovative alloy, namely NiAl, is investigated as an alternative to Al to make R-DLs able to withstand high temperatures up to 500$^\circ$C on the long term. Indeed, NiAl gathers, in the bulk state, all the necessary properties (fairly low electrical resistivity and density, high melting temperature and resistance to oxidation). The study also examines the extent of the congruent LiNbO$_3$ segregation process, to determine its impact on the NiAl/LiNbO$_3$ R-DLs performances. The obtained results are very promising. NiAl electrodes self-passivate during the first 50h of annealing at 500$^\circ$C: 20 nm-thick Al$_2$O$_3$ layers form at the surface and in between the electrodes and the substrate, protecting the remaining NiAl layer from further oxidation. Besides, the segregation process occurs mainly in the same time. It is located in the first 150-200 nm of the substrate. Both phenomena have no significant impact on the performance of NiAl/LiNbO$_3$ R-DLs working at 433 MHz. Continuous in-situ electrical monitoring of such devices shows a standard deviation of the operating frequency of only 1.04 ppm during an annealing process of 250h at 500$^\circ$C. Moreover, the time-resolved S11 response of the device at the end of this treatment is not degraded at all. Thus, 433 MHz NiAl/LiNbO$_3$ R-DL sensors can operate with high fidelity for at least 10 days at 500$^\circ$C under air atmosphere, and there are strong signs that their lifetime is actually much longer.

Explore related subjects

physics.ins-det

Keep this discovery

BibTeXRIS

Jordan Maufay, Baptiste Paulmier, Mélanie Emo, Ulrich Youbi, Esther Mbina, Thierry Aubert, Ninel Kokanyan, Sami Hage-Ali, Michel Vilasi, Omar Elmazria. 2023-09-12. Innovative NiAl Electrodes for Long-Term, Intermediate High-Temperature SAW Sensing Applications Using LiNbO$_3$ Substrates. https://doi.org/10.1109/jsen.2023.3289008

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗