Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2408.13343

FSUDAQ -- A general purpose GUI data acquisition program for the CAEN x725, x730, x740 digitizers

T. L. Tang
View original source ↗Read source document ↗Export metadata ↓

Abstract

FSUDAQ is a versatile, multi-threaded, lightweight data acquisition software with a graphical user interface, designed to fully utilize the capabilities of first-generation CAEN x725, x730, and x740 series digitizers equipped with various Digital Pulse Processing (DPP) firmware, including Pulse-Height Analysis (PHA), Pulse-Shape Discrimination (PSD), and Charge-Digital Conversion (QDC). It emphasizes user-friendliness, stability, scalability, high throughput, and low latency. The software includes features such as an online waveform scope, scalar panel, and real-time single spectrum display for each input channel, along with an online event builder and analyzer capable of generating 1D and 2D histograms and applying graphical cuts. Users can also create and integrate custom online analyzers to meet specific experimental requirements. FSUDAQ has been successfully tested at the John D. Fox Laboratory at FSU, including with the Encore, ANASEN, and Super-Enge Split-Pole Spectrograph experiments. In terms of performance, FSUDAQ can handle up to approximately 500k triggers per second per channel without waveform recording, or data rates of around 65 MB/s per optical fiber, with or without waveform recording.

Explore related subjects

physics.ins-det

Keep this discovery

BibTeXRIS

T. L. Tang. 2024-08-23. FSUDAQ -- A general purpose GUI data acquisition program for the CAEN x725, x730, x740 digitizers. https://doi.org/10.1016/j.nima.2024.170072

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗