Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2501.07168

Impact of impurities on leakage current induced by High-Energy Density Pulsed Laser Annealing in Si diodes

Richard Monflier·Richard Daubriac·Mahmoud Haned·Toshiyuki Tabata·François Olivier·Eric Imbernon·Markus Italia·Antonino La Magna·Fulvio Mazzamuto·Simona Boninelli·Fuccio Cristiano·Elena Bedel Pereira
View original source ↗Read source document ↗Export metadata ↓

Abstract

For semiconductor device fabrication, Pulsed Laser Annealing (PLA) offers significant advantages over conventional thermal processes. Notably, it can provide ultrafast (~ns) and high temperature profiles ($>1000^\circ$C). When the maximum temperature exceeds the melting point, a solid-liquid phase transition is observed, immediately followed by rapid recrystallization. This unique annealing mechanism gives raises questions about dopant diffusion and residual defects, in not only in the recrystallized region, but also just below it. As power devices require micrometer-sized junctions, high laser energy densities are needed, which were proved to promote the incorporation of complex impurities from the surface and the creation of defects at the liquid/solid interface. This paper reports on the impact of laser annealing at high energy densities (up to 8.0 J/cm$^2$) on the leakage current, using Schottky and PN diodes, and DLTS measurements. Various laser annealing conditions were used: energy densities between 1.7 and 8.0 J/cm$^2$ with 1 to 10 pulses. Our results suggest that the liquid and solid solubility of vacancies in silicon are fixed by the maximum temperature reached, so to the energy density. Increasing the number of laser pulses allows, not only to reach this maximum vacancy concentration but also to promote their diffusion towards the surface. Concomitantly, the in-diffusion of complex impurities inside the melted region allows the coupling between both defect types to create trap centers, responsible for the degradation of the leakage current.

Explore related subjects

cond-mat.mtrl-sciphysics.app-ph

Keep this discovery

BibTeXRIS

Richard Monflier, Richard Daubriac, Mahmoud Haned, Toshiyuki Tabata, François Olivier, Eric Imbernon, Markus Italia, Antonino La Magna, Fulvio Mazzamuto, Simona Boninelli, Fuccio Cristiano, Elena Bedel Pereira. 2025-01-13. Impact of impurities on leakage current induced by High-Energy Density Pulsed Laser Annealing in Si diodes. https://arxiv.org/abs/2501.07168

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Measuring chiral phonons

Chiral phonons are quantized vibrations where the atomic motion in a solid breaks improper rotation symmetries. In many cases, chiral phonons possess angular momenta and are therefore selective to circularly polarized light. Both fundamental and applied research efforts on chiral phonons have been gaining increasing attention owing to their importance in a variety of fields including spintronics, spin-selective chemical reactions, thermal transport, quantum information processing and biosensing, where the bi-directional spin-lattice coupling enabled by chiral phonons can be harnessed in new ways, and potentially lead to new functionalities. Thus far, the studies of chiral phonons across diverse materials platforms have evolved largely independently within these fields, but the experimental techniques are often interrelated. In this perspective, we present a detailed description, as well as advantages and disadvantages of the current approaches for experimentally measuring chiral phonons in chiral and achiral materials. We conclude with a discussion of new methods for measuring chiral phonons. Ultimately, this work seeks to offer an experimental guide for systematically investigating the properties of chiral phonons in various materials systems and applications.

cond-mat.mtrl-sci↗
arXiv2026

A model of grain growth in UN integrating molecular dynamics, phase-field modeling, and uncertainty quantification

Grain growth kinetics and grain-boundary (GB) properties in uranium mononitride (UN) are investigated through an integrated multiscale framework combining molecular dynamics (MD), phase-field modeling, and surrogate-assisted uncertainty quantification. MD simulations yield GB energies for 27 symmetric tilt boundaries from 0--2000~K, which are consistent with available DFT values. The average GB energy is nearly temperature-independent below 1000~K and increases at higher temperatures. A mechanistic pore-drag model applied to the only available grain growth dataset for actinide nitrides yields a mobility reduction factor of $s \approx 0.93$--$0.99$, statistically indistinguishable from unity, confirming that pore drag is negligible under the experimental conditions. The intrinsic GB mobility is therefore extracted directly from the effective mobility, yielding $M_0 = 2.05\times10^{-15}$~m$^4$/(J$\cdot$s) and $Q_M = 0.89$~eV. Phase-field simulations conducted from 1500--2000~K confirm normal curvature-driven grain growth, with grain size distributions converging to the Hillert-like form. A surrogate-assisted global sensitivity analysis---combining principal component analysis, Gaussian process regression, and Sobol decomposition---reveals that the mobility prefactor $M_0$ dominates output variance at all times, followed by the activation energy $Q_M$, while the GB energy $\gamma$ contributes minimally. These results establish the first quantitative grain growth framework for UN and identify the reduction of uncertainty in $M_0$ and $Q_M$ as the highest-priority target for future experimental efforts.

cond-mat.mtrl-sci↗
arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗