SearcharxivSearch

arXiv · 2504.17631

Modular Cosmic Ray Detector (MCORD) and its Potential Use in Various Physics Experiments, Astrophysics and Geophysics

Abstract

As part of the collaboration building a set of detectors for the new collider, our group was tasked with designing and building a large-scale cosmic ray detector, which was to complement the capabilities of the MPD (Dubna) detec-tor set. The detector was planned as a trigger for cosmic ray particles and to be used to calibrate and test other systems. Additional functions were to be the detection of pairs of high-energy muons originating from some parti-cle decay processes generated during collisions and con-tinuous observation of the cosmic muon stream in order to detect multi muons events. From the very beginning, the detector was designed as a scalable and universal device for many applications. The following work will present the basic features and parameters of the Modular COsmic Ray Detector (MCORD) and examples of its possible use in high energy physics, astrophysics and geology. Thanks to its universal nature, MCORD can be potential used as a fast trigger, neutron veto detector, muon detector and as a tool in muon tomography.

Explore related subjects

Keep this discovery

BibTeXRIS

M. Bielewicz, M. Kiecana, A. Bancer, J. Grzyb, L. Swiderski, M. Grodzicka-Kobylka, T. Szczesniak, A. Dziedzic, K. Grodzicki, E. Jaworska, A. Syntfeld-Kazuch. 2025-04-24. Modular Cosmic Ray Detector (MCORD) and its Potential Use in Various Physics Experiments, Astrophysics and Geophysics. https://arxiv.org/abs/2504.17631

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det