SearcharxivSearch

arXiv · 2505.11562

GIGAPYX sensor performance in space environments

Abstract

We present the results of the GIGAPYX-4600 image sensor in space environment, more specifically under different types of irradiations (protons and heavy ions). The GIGAPYX-4600 is a state-of-the-art 46M pixel multi-purpose, backside illuminated CMOS image sensor. The sensor features high-speed (200 fps), low-noise (< 2e-rms), rolling shutter readout. It has been fabricated using 65 nm node CMOS technology, making use of capacitive deep trench isolation, thus exhibiting good MTF as well as excellent dark current characteristics. The GIGAPYX image sensor family is meant to be easily scalable thanks to a novel use of stitching technology. The assessed sensor features an impressive 46 Mpixels, but the sensor family is meant to be scaled up to 220 M pixels. The idea of this study was to investigate the radiation hardness of a commercially available off-the-shelf (COTS) image sensor that could be suitable for space-borne applications, such as earth observation or satellite vicinity surveillance. In the near future a radiation hard readout electronic for this sensor family will be made available off-the-shelf by Pyxalis. This presentation will overview the different sensor key performances evolutions after proton irradiation up to a total fluence of 2.3e11 p+/cm${}^2$ (62 MeV): dark current, dark current non-uniformity (DCNU), noise, non-linearity, saturation charge and photo-response non-uniformity (PRNU). As expected, degradations mostly occur on the dark current, DCNU and temporal noise. The orders of magnitude of the degradation are in the range of the already published high performance CIS technologies. Results obtained from heavy ions irradiations will demonstrate that the GIGAPYX is not only latch-up free at least up to 57 Mev.cm2/mg, but resistant to the blooming effects induced by a SET at pixel level thanks to its capacitive deep trench isolations. Various SEE effects have been studied, demonstrating encouraging results for such COTS device in order to fly, in particular in GEO orbit. All these radiations results will be used as inputs in designing space camera based on the GIGAPYX sensors, compatible with multiple-mission types.

Explore related subjects

Keep this discovery

BibTeXRIS

Julien Michelot, Maurin Douix, Jean-Baptiste Mancini, Marie Guillon, Kevin Melendez, Clément Ravinet, Mikael Jouans, Guy Estaves, Ronan Marec, Stéphane Demiguel, Alex Materne, Cédric Virmontois. 2025-05-16. GIGAPYX sensor performance in space environments. https://arxiv.org/abs/2505.11562

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM