Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2507.08176

Development of a laser stabilized on an ultra-stable silicon cryogenic Fabry-Perot cavity for dark matter detection

Yara Hariri·Jacques Millo·Clément Lacroûte·Joannès Barbarat·Yann Kersalé·Jonathan Gillot
View original source ↗Read source document ↗Export metadata ↓

Abstract

Astrophysical observations suggest the existence of an unknown kind of matter in the Universe, in the frame of the $\Lambda$CDM model. The research field of dark matter covers an energy scale going from massive objects to ultra-light scalar fields, which are the focus of the present work. It is supposed that ultra-light scalar fields affect the length of objects, whereas the speed of light stays unchanged. It follows that Fabry-Perot cavities are ideal tools for ultra-light dark matter detection since the fluctuations in the length of a cavity can be detected on the frequency of the laser stabilized to it. At FEMTO-ST, we have set up an ultra-stable silicon cavity suitable for a test of detection of ultra-light dark matter in an energy range close to 10$^{-10}$ eV. Our 14 cm cavity is composed of two mirrors optically bonded to an ultra-rigid spacer, with each element made in single-crystal of silicon, and cooled at 17 K in order to cancel the first order thermal expansion coefficient of the silicon spacer. The projected fractional frequency stability of the laser is $3 \times 10^{-17}$, mainly limited by the thermal noise of the amorphous dielectric reflective coatings. To reach this remarkable stability, several effects have to be reduced below the thermal noise limit. While the contribution of the residual amplitude modulation is now acceptable, we are currently implementing a laser power lock with residual fluctuations lower than 3~nW and a piezoelectric-based servo loop to actively reduce the vibration noise that has to be inferior to $-110 \textrm{~dB(m s}^{-2})^2/\textrm{Hz}$ at 1 Hz. Here, we present both the status of the development of our ultra-stable laser and the mechanical response of the cavity in the presence of ultra-light dark matter.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

Yara Hariri, Jacques Millo, Clément Lacroûte, Joannès Barbarat, Yann Kersalé, Jonathan Gillot. 2025-07-10. Development of a laser stabilized on an ultra-stable silicon cryogenic Fabry-Perot cavity for dark matter detection. https://doi.org/10.1088/1742-6596%2F2889%2F1%2F012059

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗