SearcharxivSearch

arXiv · 2508.13467

The CCOR Compact Coronagraphs for the Geostationary Operational Environmental Satellite-19 (GOES-19) and the Space Weather Follow On (SWFO) Missions

Abstract

The CCOR Compact Coronagraph is a series of two operational solar coronagraphs sponsored by the National Oceanic and Atmospheric Administration (NOAA). They were designed, built, and tested by the U.S. Naval Research Laboratory (NRL). The CCORs will be used by NOAA's Space Weather Prediction Center to detect and track Coronal Mass Ejections (CMEs) and predict the Space Weather. CCOR-1 is on board the Geostationary Operational Environmental Satellite -U (GOES-U, now GOES-19/GOES-East). GOES-U was launched from Kennedy Space Flight Center, Florida, on 25 June 2024. CCOR-2 is on board the Space Weather Follow On at Lagrange point 1 (SWFO-L1). SWFO-L1 is scheduled to launch in the fall of 2025. SWFO will be renamed SOLAR-1 once it reaches L1. The CCORs are white-light coronagraphs that have a field of view and performance similar to the SOHO LASCO C3 coronagraph. CCOR-1 FOV spans from 4 to 22 Rsun, while CCOR-2 spans from 3.5 to 26 Rsun. The spatial resolution is 39 arcsec for CCOR-1 and 65 arcsec for CCOR-2. They both operate in a band-pass of 470 - 740 nm. The synoptic cadence is 15 min and the latency from image capture to the forecaster on the ground is less than 30 min. Compared to past generation coronagraphs such as the Large Angle and Spectrometric Coronagraph (LASCO), CCOR uses a compact design; all the solar occultation is done with a single multi-disk external occulter. No internal occulter is used. This allowed a substantial reduction in size and mass compared to SECCHI COR-2, for example, but with slightly lower signal-to-noise ratio. In this article, we review the science that the CCORs will capitalize on for the purpose of operational space weather prediction. We give a description of the driving requirements and accommodations, and provide details on the instrument design. In the end, information on ground processing and data levels is provided.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A. F. Thernisien, D. H. Chua, M. T. Carter, N. B. Rich, M. Noya, T. A. Babich, C. E. Crippa, B. Baugh, Y. Bordlemay, D. Socker, D. Biesecker, C. Korendyke, D. Wang, D. Vassiliadis, N-Y. Wang, S. Abbay, S. Bagnall, L. Balmaceda, S. Brown, J. Bonafede, D. Boyer, J. Declet, P. Cheng, K. Corsi, L. Cremerius, I. Chavis, J. Chiralo, G. Clifford, J. Dancheck, J. Davis, G. Dima, R. Dudley, D. Gardner, L. Gardner, B. Hagood, R. Hagood, B. Hohl, T. Hunt, F. Jenkins, J. M. Johnson, M. Koehler, N. Kuroda, A. Lanagan, S. Laut, B. Lynch, T. Mallory, D. Mechel, N. D. Miles, A. Miranda, M. Newman, B. Nguyen, M. Ogindo, K. Pellak, R. Podgurski, T. Ragan, V. Richards, D. Silver, J. Simmons, D. J. Schmit, L. Smith, J. Spitzak, S. K. Tadikonda, S. Tanner, D. Uhl, J. Verzosa, P. Walker, G. Wiggins, E. Williams, C. Wilson, D. Zurcher. 2025-08-19. The CCOR Compact Coronagraphs for the Geostationary Operational Environmental Satellite-19 (GOES-19) and the Space Weather Follow On (SWFO) Missions. https://arxiv.org/abs/2508.13467

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM