Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2509.05430

Site Evaluation and Cost Estimation for Cosmic Explorer

Laurence Datrier·Geoffrey Lovelace·Joshua R. Smith·Andrew Saenz·Amber Romero
View original source ↗Read source document ↗Export metadata ↓

Abstract

Cosmic Explorer (CE) is a proposed next generation gravitational-wave observatory that would be sited in the United States. As of 2025, CE is in its design phase, with plans to begin operations in the 2030s together with the Einstein Telescope in Europe. CE's reference design consists of two widely separated L-shaped detectors, one with 20km arms and one with 40km arms, each based on technology proven by the National Science Foundation's highly successful Laser Interferometer Gravitational Wave Observatory (LIGO). There are unique challenges associated with identifying locations suitable for hosting Cosmic Explorer in the conterminous United States, not least of which is the order of magnitude upscaling of the observatory with respect to the 4km LIGO observatories. Cosmic Explorer's approach to site evaluation integrates physical, social and cultural criteria. Here we present improvements to the Cosmic Explorer Location Search (CELS) code used to identify and assess locations where CE would have low construction costs incurred by the geology, geography and topography of the land. We also report on efforts to integrate astrophysical requirements established by the Cosmic Explorer Science Traceability Matrix into the site evaluation process. National-level results are presented and combined with results from a related National Suitability Analysis to provide a list of locations that are preliminarily promising for a 40km CE.

Explore related subjects

physics.ins-detastro-ph.IM

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Laurence Datrier, Geoffrey Lovelace, Joshua R. Smith, Andrew Saenz, Amber Romero. 2025-09-05. Site Evaluation and Cost Estimation for Cosmic Explorer. https://doi.org/10.1088/1742-6596%2F3177%2F1%2F012093

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗
arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗
arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗