Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2601.02788

SpaceWire-based Data Acquisition Network for the Solar Flare Sounding Rocket Experiment FOXSI-4 and FOXSI-5

Shunsaku Nagasawa·Athanasios Pantazides·Kristopher Cooper·Riko Shimizu·Savannah Perez-Piel·Takahiro Minami·Yixian Zhang·Hunter Kanniainen·Shin Watanabe·Tadayuki Takahashi·Noriyuki Narukage·Juan Camilo Buitrago Casas·Lindsay Glesener
View original source ↗Read source document ↗Export metadata ↓

Abstract

We developed a SpaceWire-based data acquisition (DAQ) system for the FOXSI-4 and FOXSI-5 sounding rocket experiments, which aim to observe solar flares with high sensitivity and dynamic range using direct X-ray focusing optics. The FOXSI-4 mission, launched on April 17, 2024, achieved the first direct focusing observation of a GOES M1.6 class solar flare with imaging spectroscopy capabilities in the soft and hard X-ray energy ranges, using a suite of advanced detectors, including two CMOS sensors, four CdTe double-sided strip detectors (CdTe-DSDs), and a Quad-Timepix3 detector. To accommodate the high photon flux from a solar flare and these diverse detector types, a modular DAQ network architecture was implemented based on SpaceWire and the Remote Memory Access Protocol (RMAP). This modular architecture enabled fast, reliable, and scalable communication among various onboard components, including detectors, readout boards, onboard computers, and telemetry systems. In addition, by standardizing the communication interface and modularizing each detector unit and its associated electronics, the architecture also supported distributed development among collaborating institutions, simplifying integration and reducing overall complexity. To realize this architecture, we developed FPGA-based readout boards (SPMU-001 and SPMU-002) that support SpaceWire communication for high-speed data transfer and flexible instrument control. In addition, a real-time ground support system was developed to handle telemetry and command operations during flight, enabling live monitoring and adaptive configuration of onboard instruments in response to the properties of the observed solar flare. The same architecture is being adopted for the upcoming FOXSI-5 mission, scheduled for launch in 2026.

Explore related subjects

astro-ph.IMastro-ph.HEastro-ph.SRphysics.ins-det

Keep this discovery

BibTeXRIS

Shunsaku Nagasawa, Athanasios Pantazides, Kristopher Cooper, Riko Shimizu, Savannah Perez-Piel, Takahiro Minami, Yixian Zhang, Hunter Kanniainen, Shin Watanabe, Tadayuki Takahashi, Noriyuki Narukage, Juan Camilo Buitrago Casas, Lindsay Glesener. 2026-01-06. SpaceWire-based Data Acquisition Network for the Solar Flare Sounding Rocket Experiment FOXSI-4 and FOXSI-5. https://doi.org/10.1117/1.jatis.12.1.014004

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗