SearcharxivSearch

arXiv · 2605.25471

FPGA-based disturbance-observer servo for broadband noise suppression in laser frequency stabilization

Abstract

We have demonstrated broadband frequency-noise suppression in a laser stabilization system by augmenting a conventional proportional-integral-derivative (PID) controller with a digital disturbance observer (DOB) implemented on a field-programmable gate array (FPGA). The DOB employs a first-order exponential moving average filter as its Q-filter, replacing multi-parameter frequency-domain plant identification with a single one-dimensional gain sweep. Using modulation transfer spectroscopy on the 87Rb D2 line at 780.24 nm, we have measured the frequency-noise power spectral density and the Allan deviation of the beat note between two independently stabilized lasers. The integrated rms frequency noise below 40 kHz decreased by 16.9 dB compared with PID alone, corresponding to a reduction from approximately 140 kHz to 20 kHz. The short-term fractional frequency instability improved from sigma_y(1 ms) = $7.9 \times 10^{-12}$ to $4.6 \times 10^{-12}$, while the long-term stability at tau > 1 s remained within statistical uncertainty. This DOB-augmented architecture offers a simple and effective route to enhanced noise rejection in FPGA-based servo systems for atomic physics experiments.

Explore related subjects

Keep this discovery

BibTeXRIS

Meung Ho Seo, Jae Hoon Lee, Young-Ho Park, Hyun-Gue Hong, Seji Kang, Myoung-Sun Heo, Sang-Bum Lee, Taeg Yong Kwon, Sangwon Seo, Sang Eon Park. 2026-05-25. FPGA-based disturbance-observer servo for broadband noise suppression in laser frequency stabilization. https://arxiv.org/abs/2605.25471

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Delay-engineered dynamical phases in a programmable non-Markovian spin oscillator

Non-Markovian dynamics offer a new route towards engineering non-equilibrium matter, where memory and feedback act as programmable resources for controlling order in time. Here we report the realization of a non-Markovian spin oscillator in a hot vapour $^{129}$Xe-Cs co-magnetometer with programmable feedback delay and gain. By tuning these parameters, we observe a hierarchy of dynamical phases, including time-crystalline response, nonlinear bifurcations, and frequency-comb formation. The measured spectra and phase boundaries are captured by linear stability analysis of delayed Bloch equations, revealing these phenomena as different manifestations of the same memory-induced instability structure. These results establish time-delayed feedback as a powerful strategy for controlling non-equilibrium phases, enabling quantum sensing, frequency referencing, and synchronization within a single spin-based platform.

physics.atom-ph

Non-stick vacuum wall collisions with a laser-coolable molecule

Molecular species that are suitable for direct laser cooling are typically considered lost or destroyed if they collide with an ambient temperature vacuum wall. Here, we study surface collisions with aluminum monofluoride (AlF), a laser-coolable molecule that survives this process with unusually high probability. We detect the outgoing AlF molecules from a single wall collision via Doppler-sensitive laser-induced fluorescence spectroscopy, using incoming supersonic (pulsed) and thermochemical (continuous) molecular beams. The angular, velocity and rovibrational level distributions of the outgoing molecules show near-complete thermalisation to the wall in a single collision event. We determine an upper limit to the surface residence time of about 5$~\mu$s, and by monitoring the decay in density of pulses of molecules loaded into a small storage volume, we deduce the surface sticking probability for different materials. For a siloxane-coated metallic surface, the sticking probability of AlF is about 0.015, allowing us to accumulate molecules from the thermochemical source into an ambient temperature storage vessel at densities near $10^{8}~$cm$^{-3}$. This provides a route to compact, portable traps for neutral molecules.

physics.atom-ph

Kinetic modeling of molecular beam formation in a cryogenic buffer-gas cell

Cryogenic buffer-gas cells are widely used to produce cold molecular beams, but the microscopic dynamics governing beam formation remain challenging to model. Here we present fully kinetic simulations of a cryogenic buffer-gas cell using the Direct Simulation Monte Carlo method implemented in the PICLas framework, treating the buffer gas and ablated molecules within a single unified model. We capture characteristic features of cryogenic buffer-gas sources, including plume cooling, directed transport toward the aperture, and the formation of a slow molecular beam, while also resolving energy transfer from the hot ablation plume to the helium buffer gas that is inaccessible to existing approaches relying on the background-gas approximation. Our results demonstrate that fully kinetic simulations can provide detailed insights into buffer-gas cell dynamics and open a route toward a systematic optimization of such sources.

physics.atom-ph