SearcharxivSearch

arXiv · 2608.29050

First overnight balloon flight of the GRAINE 2023 emulsion gamma-ray telescope enabled by a large-scale pressure-vessel gondola

Abstract

The Gamma-Ray Astro Imager with Nuclear Emulsion (GRAINE) project conducts precision observations of sub-GeV--GeV cosmic gamma rays using a balloon-borne nuclear-emulsion telescope with high angular resolution. In GRAINE 2023, a 2.5-m$^{2}$ telescope was flown in the project's first overnight balloon flight, including observation periods for the Vela pulsar and Galactic center region. To operate the telescope under the low-pressure and low-temperature stratospheric environment, the balloon-style pressure-vessel concept was scaled up to a lightweight gondola with an internal length of 4.9 m. A new aluminum-alloy ring structure and a lightweight membranous-shell material, SHL-300MDL, were developed. While the telescope aperture was increased by a factor of 6.6 over GRAINE 2018, the pressure-vessel gondola mass was limited to 179 kg. Ground tests of the completed flight assembly demonstrated a differential pressure above 100 hPa at room temperature and at a mean temperature of $-66.0^{\circ}$C. The payload was launched from Alice Springs, Australia, in April 2023 and achieved a total flight duration of approximately 27 h, including 24.3 h of level flight. Although the upper membranous shell reached approximately $-60^{\circ}$C at night, the vessel internal pressure remained above the required 100 hPa throughout level flight. These results demonstrate that the developed gondola can accommodate a 2.5-m$^{2}$ emulsion gamma-ray telescope and maintain the required pressure during overnight stratospheric flight. Scientific analyses of astrophysical and atmospheric gamma rays, including dedicated analysis of the Galactic center region, are ongoing using the recovered emulsion data. This development provides a technical basis for repeated observations with future large-area GRAINE telescopes.

Explore related subjects

Keep this discovery

BibTeXRIS

Hiroki Rokujo, Shigeki Aoki, Takashi Azuma, Hirotaka Hayashi, Yudai Isayama, Atsushi Iyono, Takumi Kato, Tsuyoshi Kawahara, Koichi Kodama, Ryosuke Komatani, Masahiro Komatsu, Masahiro Komiyama, Hideyuki Minami, Kunihiro Morishima, Fumiya Murakami, Shogo Nagahara, Naotaka Naganawa, Mitsuhiro Nakamura, Tomoaki Nakamura, Yuya Nakamura, Noboru Nakano, Toshiyuki Nakano, Kazuma Nakazawa, Miyuki Oda, Kazuhiro Okamoto, Osamu Sato, Kai Shimizu, Amon Suganami, Yuki Sugi, Kou Sugimura, Satoru Takahashi, Ikuya Usuda, Saya Yamamoto, Jun Yamashita, Mayu Yamashita, Shoma Yoneno, Masahiro Yoshimoto. 2026-08-29. First overnight balloon flight of the GRAINE 2023 emulsion gamma-ray telescope enabled by a large-scale pressure-vessel gondola. https://arxiv.org/abs/2608.29050

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM