Searcharxiv⌕ Search

arXiv · 2610.20889

A Rydberg atom array coupled to a high-cooperativity optical cavity

Abstract

Integrating Rydberg-state control of atom-atom interactions with cavity control of atom-light interactions enables the combination of local entangling operations with photon-mediated long-range coupling, measurement, and communication. Such integration is challenging because electric fields generated by charges on cavity optics and by cavity-stabilizing actuators may disturb Rydberg-state coherence. Here, we couple a Rydberg tweezer array to a high-cooperativity optical cavity, suppressing the electric fields produced by cavity length actuation so that the residual field variation of about $3~\mathrm{mV/cm}$ rms does not limit Rydberg coherence. We demonstrate two capabilities that neither system provides alone. First, we use Purcell-enhanced fluorescence to read out atoms directly in the ground-Rydberg basis within $7.5~μ\mathrm{s}$, well within the Rydberg-state lifetime, with ground- and Rydberg-state detection infidelities of $3\%$ and $5\%$, respectively, and with low atom loss. Second, we use Rydberg-Rydberg interactions to control collective light-atom scattering into the cavity mode. Specifically, we drive blockaded Rabi oscillations between a state with two ground-state atoms, which scatter collectively with a superradiant or subradiant rate controlled by the atomic positions, and an entangled state with a single Rydberg excitation, which scatters like a single atom. These capabilities open routes toward networked Rydberg processors, mid-circuit measurements in analog quantum simulators, and many-body quantum optics with entangled emitters coupled collectively to light.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Tai Xiang, Yue-Hui Lu, Tsai-Chen Lee, Jacquelyn Ho, Michael Lan, Zhenjie Yan, Harry Levine, Nathaniel B. Vilas, Dan M. Stamper-Kurn. 2026-10-16. A Rydberg atom array coupled to a high-cooperativity optical cavity. https://arxiv.org/abs/2610.20889

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

Precision measurement of the ground-state hyperfine constant for $^9Be^+$ in a linear Paul trap via magnetically insensitive hyperfine transitions

Direct measurements of the ground-state magnetically insensitive hyperfine transition |F=2,mF=0>->|F=1,mF=0> of $^9Be^+$ ions have been performed using microwave-driven state transfer. The $^9Be^+$ ions are confined and laser-cooled in a linear Paul trap, forming a Coulomb crystal. The transition frequencies have been measured over a magnetic field range of $ \pm 0.5 mT $ centered at zero magnetic field, and the acquired data were fitted accounting for the high-order Zeeman effect. The hyperfine constant A is determined to be -625.008840(35) MHz, achieving a relative precision of $ 5.6 \times 10^{-8}$.

physics.atom-ph↗

Fully relativistic calculation of thermal shifts in spectra of hydrogen molecular ion

Within a fully relativistic framework, we discuss the one-loop self-energy correction, generalized to the presence of external blackbody radiation, for a bound electron in the hydrogen molecular ion. The calculations rely on the thermal part of the photon propagator from finite-temperature quantum electrodynamics. The Dirac equation with a two-center potential is solved using the dual kinetic balance condition, extended to axially symmetric systems, and a B-spline-based trial function. The results are obtained within the Born-Oppenheimer adiabatic approximation. Thermal shift for the ground term of the hydrogen molecular ion is computed as a function of the internuclear distance. Including this correction, we present the resulting shifts of the vibrational levels. The analysis focuses on the dynamical effect, a comparison is made with data available in the current literature.

physics.atom-ph↗

A large nonmagnetic aluminum-and-Viton vacuum chamber suitable for vacuum pressures down into the extremely-high-vacuum (XHV) regime

A recently constructed large nonmagnetic vacuum chamber is described and characterized. The vacuum chamber was machined from 19-inch cubes of aluminum and are sealed using dual Viton O-rings (with the interspace between the O-rings evacuated by a separate vacuum pump). 17-inch-diameter openings on all six sides allow for easy access to the experimental apparatus and for vacuum pumps with very large pumping speeds. These 17-inch holes were bored straight through the aluminum cube, resulting in an interior volume of 100 L (almost 90\% of the total volume of the 19-inch cube). The 17-inch openings are sealed with 19-inch-diameter aluminum flanges. The system is modular in that the cubes can be connected to one another to form larger vacuum systems. The chamber is designed to allow for vacuum pressures of $10^{-12}$ torr. In many respects (including nonmagnetic properties, outgassing rate after low-temperature baking, weight, cost, ease of machining, and ease of baking due to the chamber's high thermal conductivity) this system is superior to standard stainless-steel metal-sealed CF vacuum systems and is highly recommended for use by others.

physics.atom-ph↗