Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2610.24003

Missing Light, Misleading Confidence: Optical-Module Readout Loss and Signal Reliability in Neutrino Telescopes

Thammarat Yawisit·Pittaya Pannil
View original source ↗Read source document ↗Export metadata ↓

Abstract

Optical neutrino telescopes reduce the photomultiplier signals of an optical module or string segment to compact multichannel summaries, and readout loss can make these summaries unreliable. We asked whether availability-based quality gates, which accept a summary when enough of the readout was live, can certify a summary of inter-channel statistical consistency (called coherence here; not optical coherence) under readout loss, and where they fail. We used public IceCube pulses (9,484 string records) and the released hits of KM3NeT event KM3-230213A with controlled readout loss, together with a replay of real KM3NeT readout flags. In a two-by-two design we compared a published recursive support state with direct mask support, and calibrated every threshold on development records. The support state is a function of the mask and added no information. On IceCube the support-gated rule retained 0.16 percentage points more usable summaries, an effect of the window at which support was read that reversed sign at a looser tolerance; on KM3NeT it accepted nothing. The gates accepted only records with nearly intact masks, including records whose charge had been depleted by signal-dependent loss that the mask does not record. Pulse loss during live acquisition and timing jitter passed every availability gate, which then accepted summaries of which up to 66% were unreliable. Availability flags are therefore necessary but not sufficient, and signal-based checks are needed. This work uses public data and is not an IceCube or KM3NeT Collaboration result.

Explore related subjects

astro-ph.IMphysics.ins-det

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Thammarat Yawisit, Pittaya Pannil. 2026-10-15. Missing Light, Misleading Confidence: Optical-Module Readout Loss and Signal Reliability in Neutrino Telescopes. https://arxiv.org/abs/2610.24003

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Prospects for submillimeter VLBI of black hole photon rings with a stratospheric balloon-borne telescope

Submillimeter very long baseline interferometry (VLBI) achieves higher angular resolution and probes more optically thin emission near supermassive black holes, with less interstellar scattering toward Sgr A$^*$. Above 345 GHz, however, the atmosphere confines ground-based VLBI to a few high, dry sites. Using 2012-2022 weather, we forecast what a 2.5 m telescope floating at 35-40 km, a successor to the 22 GHz Balloon-borne VLBI Experiment (BVEX) pathfinder, would add to ground-VLBI arrays at 345-690 GHz. The balloon adds little baseline length but reaches higher frequencies, where a fixed baseline is longer in wavelengths. On an ALMA-balloon baseline, Sgr A$^*$ at 460 GHz is at the detection threshold, with ten or more 20 s detections on about half of the simulated April days. These detections lie beyond the polarimetric photon ring transition, where the $n=1$ ring dominates the polarized visibility amplitudes. M87$^*$ at 460 GHz would need frequency phase transfer from a 230 GHz reference to be detected. With phase transfer, most Sgr A$^*$ detections beyond the transition at 460 GHz are on balloon baselines, whose thermal noise meets the linear-polarization threshold within one 300 s scan. At 690 GHz such detections require phase transfer that stays coherent at three times the reference frequency. In Fisher forecasts, a 460 GHz ring-geometry constraint requires balloons but is weaker than at 345 GHz, where balloons add little improvement. High-resolution 460 GHz VLBI science would require a 32 GHz bandwidth backend, submillimeter receivers, and simultaneous 230 GHz reference recording at every station.

astro-ph.IM↗
arXiv2026

Attitude Estimation of Falcon 9 Rocket Body Based on Photometric Characteristics

The proliferation of space debris, driven by increasingly frequent space activities, poses a severe risk to operational satellites and future missions. Consequently, the surveillance and characterization of space objects have become critical. Current methods for attitude estimation of space objects often rely on target-specific models, such as those with a closed set of facets, and typically employ nonlinear filtering or machine learning techniques. However, these approaches often lack general applicability. This study proposes a more general approach to attitude estimation based on photometric light curves. We define a loss function that quantifies the discrepancy between the measured light curve and a theoretical model parameterized by the attitude parameters. By leveraging automatic differentiation to compute the gradients of this function, we use a gradient descent algorithm to achieve rapid and accurate attitude estimation. The proposed method provides a versatile and efficient framework for attitude estimation, overcoming the target-specificity limitations of existing techniques, with the parameters estimation time reduced to 15 seconds and the mean square error lowered to three decimal places. Validation on the third-party database demonstrates that the method exhibits strong generalization capability.

astro-ph.IM↗
arXiv2026

PRIMA prototype spaceflight KID readout electronics laboratory characterization

We present further development and testing of prototype kinetic inductance detector (KID) readout electronics for the PRobe far-Infrared Mission for Astrophysics (PRIMA). PRIMA is a NASA Probe-class astrophysics mission concept with two science instruments, FIRESS and PRIMAger, which provide spectroscopic and polarimetric imaging from 24 to 261 um. Together these instruments will explore the far-infrared sky with spatial-spectral mapping speeds that exceed previous studies by orders of magnitude, opening a vast discovery space. This increase in mapping speed is achieved by densely packed ultra-sensitive KIDs and cryogenically cooled optics. The PRIMA flight readout electronics will use the build-to-print SpaceCube Mini v3.0 which houses a radiation-tolerant Kintex KU060 field programmable gate array (FPGA). A custom high-speed digitizer board is being designed along with an RF electronics (RFE) board. The RFE was designed to provide programmable gain, band filtering, and RF switching between instruments. The prototype readout electronics, including the RFE, use functionally equivalent parts to the flight parts. In this proceeding we measure the readout loopback noise performance in the second Nyquist zone and timestream cross-talk performance. We present preliminary sweeps with the prototype readout coupled to prototype FIRESS detectors. Lastly, we demonstrate a cosmic ray pulse detection and real-time removal with an algorithm implemented in firmware.

astro-ph.IM↗