Searcharxiv⌕ Search

arXiv subjects

Abraham D. Falcone

Publications and source records attributed to Abraham D. Falcone.

At least 37 records · Page 2Linked to original sources

Measuring the Quantum Efficiency of X-Ray Hybrid CMOS Detectors

Next-generation X-ray observatories, such as the Lynx X-ray Observatory Mission Concept, will require detectors with high quantum efficiency (QE) across the soft X-ray band to observe the faint objects that drive their mission science cases. Hybrid CMOS Detectors (HCDs), a form of active-pixel sensor, are promising candidates for use on these missions because of their faster read-out, lower power consumption, and greater radiation hardness than detectors used in the current generation of X-ray telescopes. In this work, we present QE measurements of a Teledyne H2RG HCD. These measurements were performed using a gas-flow proportional counter as a reference detector to measure the absolute flux incident on the HCD. We find an effective QE of $95.0 \pm 1.1\%$ at the Mn K$α$/K$β$ lines (at 5.9 and 6.5 keV), $98.5 \pm 1.8\%$ at the Al K$α$ line (1.5 keV), and $85.0 \pm 2.8\%$ at the O K$α$ line (0.52 keV).

astro-ph.IM↗

X-ray Spectra and Multiwavelength Machine Learning Classification for Likely Counterparts to Fermi 3FGL Unassociated Sources

We conduct X-ray spectral fits on 184 likely counterparts to Fermi-LAT 3FGL unassociated sources. Characterization and classification of these sources allows for more complete population studies of the high-energy sky. Most of these X-ray spectra are well fit by an absorbed power law model, as expected for a population dominated by blazars and pulsars. A small subset of 7 X-ray sources have spectra unlike the power law expected from a blazar or pulsar and may be linked to coincident stars or background emission. We develop a multiwavelength machine learning classifier to categorize unassociated sources into pulsars and blazars using gamma- and X-ray observations. Training a random forest procedure with known pulsars and blazars, we achieve a cross-validated classification accuracy of 98.6%. Applying the random forest routine to the unassociated sources returned 126 likely blazar candidates (defined as $ P_{bzr} > 90 \% $) and 5 likely pulsar candidates ($ P_{bzr} < 10 \% $). Our new X-ray spectral analysis does not drastically alter the random forest classifications of these sources compared to previous works, but it builds a more robust classification scheme and highlights the importance of X-ray spectral fitting. Our procedure can be further expanded with UV, visual, or radio spectral parameters or by measuring flux variability.

astro-ph.HE↗

Classifying blazar candidates from the 3FGL unassociated catalog into BL Lacs and FSRQs using Swift and WISE data

We utilize machine learning methods to distinguish BL Lacertae objects (BL Lac) from Flat Spectrum Radio Quasars (FSRQ) within a sample of likely X-ray blazar counterparts to Fermi 3FGL unassociated gamma-ray sources. From our previous work, we have extracted 84 sources that were classified as $\geq$ 99% likley to be blazars. We then utilize Swift$-$XRT, Fermi, and WISE (The Wide-field Infrared Survey Explorer) data together to distinguish the specific type of blazar, FSRQs or BL Lacs. Various X-ray and Gamma-ray parameters can be used to differentiate between these subclasses. These are also known to occupy different parameter space on the WISE color-color diagram. Using all these data together would provide more robust results for the classified sources. We utilized a Random Forest Classifier to calculate the probability for each blazar to be associated with a BL Lac or an FSRQ. Based on P$_{bll}$, which is the probability for each source to be a BL Lac, we placed our sources into five different categories based on this value as follows; P$_{bll}$ $\geq$ 99%: highly likely BL Lac, P$_{bll}$ $\geq$ 90%: likely BL Lac, P$_{bll}$ $\leq$ 1%: highly likely FSRQ, P$_{bll}$ $\leq$ 10%: likely FSRQ, and 90% $<$ P$_{bll}$ $<$ 10%: ambiguous. Our results categorize the 84 blazar candidates as 50 likely BL Lacs and the rest 34 being ambiguous. A small subset of these sources have been listed as associated sources in the most recent Fermi catalog, 4FGL, and in these cases our results are in agreement on the classification.

astro-ph.HE↗

Exploring rapid transient detection with the Athena Wide Field Imager

X-ray transients are among the most enigmatic objects in the cosmic sky. The unpredictability and underlying nature of their transient behavior has prompted much study in recent years. While significant progress has been made in this field, a more complete understanding of such events is often hampered by the delay in the rapid follow-up of any transient event. An efficient way to mitigate this constraint would be to devise a way for near real time detection of such transient phenomena. The Athena/Wide Field Imager (WFI), with its $40' \times 40'$ field of view and large effective area, will detect a large number of X-ray variable or transient objects daily. In this work, we discuss an algorithm for the rapid on-board or ground-based detection of X-ray transients with WFI. We present a feasibility test of the algorithm using simulated Athena/WFI data and show that a fairly simple algorithm can effectively detect transient and variable sources in typical Athena/WFI observations.

astro-ph.HE↗

Trinity: An Air-Shower Imaging System for the Detection of Ultrahigh Energy Neutrinos

Efforts to detect ultrahigh energy neutrinos are driven by several objectives: What is the origin of astrophysical neutrinos detected with IceCube? What are the sources of ultrahigh energy cosmic rays? Do the ANITA detected events point to new physics? Shedding light on these questions requires instruments that can detect neutrinos above $10^7$ GeV with sufficient sensitivity - a daunting task. While most ultrahigh energy neutrino experiments are based on the detection of a radio signature from shower particles following a neutrino interaction, we believe that the detection of Cherenkov and fluorescence light from shower particles is an attractive alternative. Imaging air showers with Cherenkov and fluorescence light is a technique that is successfully used in several ultrahigh energy cosmic ray and very-high energy gamma-ray experiments. We performed a case study of an air-shower imaging system for the detection of earth-skimming tau neutrinos. The detector configuration we consider consists of an imaging system that is located on top of a mountain and is pointed at the horizon. From the results of this study we conclude that a sensitivity of $3\cdot10^{-9}$ GeV cm$^{-2}$s$^{-1}$sr$^{-1}$ can be achieved at $2\cdot10^8$ GeV with a relatively small and modular system after three years of observation. In this presentation we discuss key findings of our study and how they translate into design requirements for an imaging system we dub Trinity.

astro-ph.IM↗

Hybrid CMOS detectors for the Lynx x-ray surveyor high definition x-ray imager

X-ray hybrid CMOS detectors (HCDs) are a promising candidate for future x-ray missions requiring high throughput and fine angular resolution along with large field-of-view, such as the high-definition x-ray imager (HDXI) instrument on the Lynx x-ray surveyor mission concept. These devices offer fast readout capability, low power consumption, and radiation hardness while maintaining high detection efficiency from 0.2 to 10 keV. In addition, x-ray hybrid CMOS sensors may be fabricated with small pixel sizes to accommodate high-resolution optics and have shown great improvements in recent years in noise and spectral resolution performance. In particular, 12.5-μm pitch prototype devices that include in-pixel correlated double sampling capability and crosstalk eliminating capacitive transimpedance amplifiers, have been fabricated and tested. These detectors have achieved read noise as low as 5.4 e-, and we measure the best energy resolution to be 148 eV (2.5%) at 5.9 keV and 78 eV (14.9%) at 0.53 keV. We will describe the characterization of these prototype small-pixel x-ray HCDs, and we will discuss their applicability to the HDXI instrument on Lynx.

astro-ph.IM↗

Overview of the High-Definition X-ray Imager instrument on the Lynx x-ray surveyor

Four NASA Science and Technology Definition Teams have been convened in order to develop and study four mission concepts to be evaluated by the upcoming 2020 Decadal Survey. The Lynx x-ray surveyor mission is one of these four large missions. Lynx will couple fine angular resolution (<0.5 arcsec HPD) x-ray optics with large effective area (~2 m^2 at 1 keV), thus enabling exploration within a unique scientific parameter space. One of the primary soft x-ray imaging instruments being baselined for this mission concept is the high-definition x-ray imager, HDXI. This instrument would use a finely pixelated silicon sensor array to achieve fine angular resolution imaging over a wide field of view (~22 x 22 arcmin). Silicon sensors enable large-format/small-pixel devices, radiation tolerant designs, and high quantum efficiency across the entire soft x-ray bandpass. To fully exploit the large collecting area of Lynx (~30x Chandra), with negligible or minimal x-ray event pile-up, the HDXI will be capable of much faster frame rates than current x-ray imagers. We summarize the planned requirements, capabilities, and development status of the HDXI instrument, and associated papers in this special edition will provide further details on some specific detector options.

astro-ph.IM↗

Probing an X-ray flare pattern in Mrk 421 induced by multiple stationary shocks: a solution to the bulk Lorentz factor crisis

The common observations of multiple radio VLBI stationary knots in high-frequency-peaked BL Lacs (HBLs) can be interpreted as multiple recollimation shocks accelerating particles along jets. This approach can resolve the so-called "bulk Lorentz factor crisis" of sources with high Lorentz factor, deduced from maximum gamma-gamma opacity and fast variability, and apparently inconsistent slow/stationary radio knots. It also suggests that a unique pattern of the non-thermal emission variability should appear after each strong flare. Taking advantage of the 13 years of observation of the HBL Mrk 421 by the X-ray Telescope on the Neil Gehrels Swift Observatory Swift-XRT, we probe for such an intrinsic variability pattern. Its significance is then statistically estimated via comparisons with numerous similar simulated lightcurves. A suggested variability pattern is identified, consistent with a main flare emission zone located in the most upstream 15.3 GHz radio knot at 0.38 mas from the core. Subsequent flux excesses in the lightcurve are consistent with a perturbation crossing all the downstream radio knots with a constant apparent speed of 45 c. The significance of the observed variability pattern not arising from stochastic processes is found above 3 standard deviations, opening a promising path for further investigations in other blazars and with other energy bands. In addition to highlight the role of stationary radio knots as high-energy particle accelerators in jets, the developed method allows estimates of the apparent speed and size of a jet perturbation without the need to directly observe any motion in jets.

astro-ph.HE↗

The Advanced X-ray Imaging Satellite

Much of the baryonic matter in the Universe, including the most active and luminous sources, are best studied in the X-ray band. Key advances in X-ray optics and detectors have paved the way for the Advanced X-ray Imaging Satellite (AXIS), a Probe-class mission that is a major improvement over Chandra, which has generated a steady stream of important discoveries for the past 2 decades. AXIS can be launched in the late 2020s and will transform our understanding in several major areas of astrophysics, including the growth and fueling of supermassive black holes, galaxy formation and evolution, the microphysics of cosmic plasmas, the time-variable universe, and a wide variety of cutting-edge studies. Relative to Chandra, the AXIS PSF is nearly twice as sharp on-axis; its field of view for subarcsecond imaging 70 times larger by area; its effective area at 1 keV is 10 times larger. The low-Earth orbit ensures a low and stable detector background, resulting in 50 times greater sensitivity than Chandra for extended sources. AXIS has a rapid repointing response with operations similar to Swift, but is 100 times more sensitive for time-domain science. These capabilities open up a vast discovery space and complement the next generation of astronomical observatories. A high-spectral-resolution mission (Athena) operating at the same time as a high-angular-resolution mission (AXIS) greatly increases the range of scientific discovery. AXIS will use lightweight X-ray optics made of thin single-crystal silicon mirrors developed at NASA Goddard. The detector array builds on a long legacy of X-ray CCD and provides improved photon localization, much faster readout time, and broader energy band. The estimated mission costs are consistent with the $1B Probe mission cost guideline.

astro-ph.HE↗

X-ray Hybrid CMOS Detectors: Recent Development and Characterization Progress

X-ray Hybrid CMOS Detectors (HCDs) have advantages over X-ray CCDs due to their higher readout rate abilities, flexible readout, inherent radiation hardness, and low power, which make them more suitable for the next generation large area X-ray telescope missions. The Penn State high energy astronomy laboratory has been working on the development and characterization of HCDs in collaboration with Teledyne Imaging Sensors (TIS). We characterized an H2RG detector with a Cryo-SIDECAR readout and controller, and we find an improved energy resolution of ~2.7 % at 5.9 keV and read noise of ~6.5 e-. This detector was successfully flown on NASA's first water recovery sounding rocket flight on April 4th, 2018. We have also been developing several new HCDs with potential applications for future X-ray astronomy missions. We are characterizing the performance of small-pixel HCDs (12.5 μm pitch), which are important for the development of a next-generation high-resolution imager with HCDs. We also characterized a 64 x 64 pixel prototype Speedster-EXD detector that uses comparators in each pixel to read out only those pixels having detectable signal, thereby providing an order of magnitude improvement in the effective readout rate. HCDs can also be utilized as a large FOV instrument to study the prompt and afterglow emissions of GRBs and detect black hole transients. In this context, we are characterizing a Lobster-HCD system for future CubeSat experiments. This paper briefly presents these new developments and experimental results.

astro-ph.IM↗

Recent X-ray hybrid CMOS detector developments and measurements

The Penn State X-ray detector lab, in collaboration with Teledyne Imaging Sensors (TIS), have progressed their efforts to improve soft X-ray Hybrid CMOS detector (HCD) technology on multiple fronts. Having newly acquired a Teledyne cryogenic SIDECAR ASIC for use with HxRG devices, measurements were performed with an H2RG HCD and the cooled SIDECAR. We report new energy resolution and read noise measurements, which show a significant improvement over room temperature SIDECAR operation. Further, in order to meet the demands of future high-throughput and high spatial resolution X-ray observatories, detectors with fast readout and small pixel sizes are being developed. We report on characteristics of new X-ray HCDs with 12.5 micron pitch that include in-pixel CDS circuitry and crosstalk-eliminating CTIA amplifiers. In addition, PSU and TIS are developing a new large-scale array Speedster-EXD device. The original 64 x 64 pixel Speedster-EXD prototype used comparators in each pixel to enable event driven readout with order of magnitude higher effective readout rates, which will now be implemented in a 550 x 550 pixel device. Finally, the detector lab is involved in a sounding rocket mission that is slated to fly in 2018 with an off-plane reflection grating array and an H2RG X-ray HCD. We report on the planned detector configuration for this mission, which will increase the NASA technology readiness level of X-ray HCDs to TRL 9.

astro-ph.IM↗

The Athena WFI Science Products Module

The Science Products Module (SPM), a US contribution to the Athena Wide Field Imager, is a highly capable secondary CPU that performs special processing on the science data stream. The SPM will have access to both accepted X-ray events and those that were rejected by the on-board event recognition processing. It will include two software modules. The Transient Analysis Module will perform on-board processing of the science images to identify and characterize variability of the prime target and/or detection of serendipitous transient X-ray sources in the field of view. The Background Analysis Module will perform more sophisticated flagging of potential background events as well as improved background characterization, making use of data that are not telemetered to the ground, to provide improved background maps and spectra. We present the preliminary design of the SPM hardware as well as a brief overview of the software algorithms under development.

astro-ph.IM↗

The High Definition X-ray Imager (HDXI) Instrument on the Lynx X-Ray Surveyor

The Lynx X-ray Surveyor Mission is one of 4 large missions being studied by NASA Science and Technology Definition Teams as mission concepts to be evaluated by the upcoming 2020 Decadal Survey. By utilizing optics that couple fine angular resolution (<0.5 arcsec HPD) with large effective area (~2 m^2 at 1 keV), Lynx would enable exploration within a unique scientific parameter space. One of the primary soft X-ray imaging instruments being baselined for this mission concept is the High Definition X-ray Imager, HDXI. This instrument would achieve fine angular resolution imaging over a wide field of view (~ 22 x 22 arcmin, or larger) by using a finely-pixelated silicon sensor array. Silicon sensors enable large-format/small-pixel devices, radiation tolerant designs, and high quantum efficiency across the entire soft X-ray bandpass. To fully exploit the large collecting area of Lynx (~30x Chandra), without X-ray event pile-up, the HDXI will be capable of much faster frame rates than current X-ray imagers. The planned requirements, capabilities, and development status of the HDXI will be described.

astro-ph.IM↗

BlackCAT CubeSat: A Soft X-ray Sky Monitor, Transient Finder, and Burst Detector for High-energy and Multimessenger Astrophysics

Here we present the conceptual design of a wide field imager onboard a 6U class CubeSat platform for the study of GRB prompt and afterglow emission and detection of electromagnetic counterparts of gravitational waves in soft X-rays. The planned instrument configuration consists of an array of X-ray Hybrid CMOS detectors (HCD), chosen for their soft-X-ray response, flexible and rapid readout rate, and low power, which makes these detectors well suited for detecting bright transients on a CubeSat platform. The wide field imager is realized by a 2D coded mask. We will give an overview of the instrument design and the scientific requirements of the proposed mission.

astro-ph.IM↗

The Speedster-EXD- A New Event-Driven Hybrid CMOS X-ray Detector

The Speedster-EXD is a new 64x64 pixel, 40 $μ$m pixel pitch, 100 $μ$m depletion depth hybrid CMOS X-ray detector (HCD) with the capability of reading out only those pixels containing event charge, thus enabling fast effective frame rates. A global charge threshold can be specified, and pixels containing charge above this threshold are flagged and read out. The Speedster detector has also been designed with other advanced in-pixel features to improve performance, including a low-noise, high-gain CTIA amplifier that eliminates interpixel capacitance crosstalk (IPC), and in-pixel Correlated Double Sampling (CDS) subtraction to reduce reset noise. We measure the best energy resolution on the Speedster-EXD detector to be 206 eV (3.5 %) at 5.89 keV and 172 eV (10.0 %) at 1.49 keV. The average IPC to the four adjacent pixels is measured to be 0.25 $\pm$ 0.2 % (i.e. consistent with zero). The pixel-to-pixel gain variation is measured to be 0.80 $\pm$ 0.03 %, and a Monte Carlo simulation is applied to better characterize the contributions to the energy resolution.

astro-ph.IM↗

The speedster-EXD - A new event-triggered hybrid CMOS x-ray detector

We present preliminary characterization of the Speedster-EXD, a new event driven hybrid CMOS detector (HCD) developed in collaboration with Penn State University and Teledyne Imaging Systems. HCDs have advantages over CCDs including lower susceptibility to radiation damage, lower power consumption, and faster read-out time to avoid pile-up. They are deeply depleted and able to detect x-rays down to approximately 0.1 keV. The Speedster-EXD has additional in-pixel features compared to previously published HCDs including: (1) an in-pixel comparator that enables read out of only the pixels with signal from an x-ray event, (2) four different gain modes to optimize either full well capacity or energy resolution, (3) in-pixel CDS subtraction to reduce read noise, and (4) a low-noise, high-gain CTIA amplifier to eliminate interpixel capacitance crosstalk. When using the comparator feature, the user can set a comparator threshold and only pixels above the threshold will be read out. This feature can be run in two modes including single pixel readout in which only pixels above the threshold are read out and 3x3 readout where a 3x3 region centered on the central pixel of the x-ray event is read out. The comparator feature of the Speedster-EXD increases the detector array effective frame rate by orders of magnitude. The new features of the Speedster-EXD hybrid CMOS x-ray detector are particularly relevant to future high throughput x-ray missions requiring large-format silicon imagers.

astro-ph.IM↗

Characterization of Si Hybrid CMOS Detectors for use in the Soft X-ray Band

We report on the characterization of four Teledyne Imaging Systems HAWAII Hybrid Si CMOS detectors designed for X-ray detection. Three H1RG detectors were studied along with a specially configured H2RG. Read noise measurements were performed, with the lowest result being 7.1 e- RMS. Interpixel capacitive crosstalk (IPC) was measured for the three H1RGs and for the H2RG. The H1RGs had IPC upper limits of 4.0 - 5.5 % (up & down pixels) and 8.7 - 9.7 % (left & right pixels), indicating a clear asymmetry. Energy resolution is reported for two X-ray lines, 1.5 & 5.9 keV, at multiple temperatures between 150 - 210 K. The best resolution measured at 5.9 keV was 250 eV (4.2 %) at 150 K, with IPC contributing significantly to this measured energy distribution. The H2RG, with a unique configuration designed to decrease the capacitive coupling between ROIC pixels, had an IPC of 1.8 +/- 1.0 % indicating a dramatic improvement in IPC with no measurable asymmetry. We also measured dark current as a function of temperature for each detector. For the detector with the lowest dark current, at 150 K, we measured a dark current of 0.020 +/- 0.001 (e- sec-1 pix-1). There is also a consistent break in the fit to the dark current data for each detector. Above 180 K, all the data can be fit by the product of a power law in temperature and an exponential. Below 180 K the dark current decreases more slowly; a shallow power law or constant must be added to each fit, indicating a different form of dark current is dominant in this temperature regime. Dark current figures of merit at 293 K are estimated from the fit for each detector.

astro-ph.IM↗

Characterization of an x-ray hybrid CMOS detector with low interpixel capacitive crosstalk

We present the results of x-ray measurements on a hybrid CMOS detector that uses a H2RG ROIC and a unique bonding structure. The silicon absorber array has a 36μm pixel size, and the readout array has a pitch of 18μm; but only one readout circuit line is bonded to each 36x36μm absorber pixel. This unique bonding structure gives the readout an effective pitch of 36μm. We find the increased pitch between readout bonds significantly reduces the interpixel capacitance of the CMOS detector reported by Bongiorno et al. 2010 and Kenter et al. 2005.

astro-ph.IM↗