arXiv subjects

Amir H. Safavi-Naeini

Publications and source records attributed to Amir H. Safavi-Naeini.

At least 91 records · Page 5Linked to original sources

arXiv2018

Coupling a superconducting quantum circuit to a phononic crystal defect cavity

Connecting nanoscale mechanical resonators to microwave quantum circuits opens new avenues for storing, processing, and transmitting quantum information. In this work, we couple a phononic crystal cavity to a tunable superconducting quantum circuit. By fabricating a one-dimensional periodic pattern in a thin film of lithium niobate and introducing a defect in this artificial lattice, we localize a 6 gigahertz acoustic resonance to a wavelength-scale volume of less than one cubic micron. The strong piezoelectricity of lithium niobate efficiently couples the localized vibrations to the electric field of a widely tunable high-impedance Josephson junction array resonator. We measure a direct phonon-photon coupling rate $g/2π\approx 1.6 \, \mathrm{MHz}$ and a mechanical quality factor $Q_\mathrm{m} \approx 3 \times 10^4$ leading to a cooperativity $C\sim 4$ when the two modes are tuned into resonance. Our work has direct application to engineering hybrid quantum systems for microwave-to-optical conversion as well as emerging architectures for quantum information processing.

quant-ph↗

arXiv2017

A single-mode phononic wire

Photons and electrons transmit information to form complex systems and networks. Phonons on the other hand, the quanta of mechanical motion, are often considered only as carriers of thermal energy. Nonetheless, their flow can also be molded in fabricated nanoscale circuits. We design and experimentally demonstrate wires for phonons that transmit information with little loss or scattering across a chip. By patterning the surface of a silicon chip, we completely eliminate all but one channel of phonon conduction. We observe the emergence of low-loss standing waves in millimeter long phononic wires that we address and cool optically. Coherent transport and strong optical coupling to a phononic wire enables new phononic technologies to manipulate information and energy on a chip.

quant-ph↗

arXiv2017

Enhancing a slow and weak optomechanical nonlinearity with delayed quantum feedback

One of the central goals of quantum optics is to generate large interactions between single photons. Light interacting with motion in an optomechanical system can sense minute fluctuations in displacement, and also impart a force via radiation pressure. Taken together, these two effects mean that two photons can "sense" each other's presence in an interaction mediated by motion. It is accepted that for an optomechanical system to mediate strong interactions between single photons, the mechanical system must respond before the photon is lost ($ω_m > κ$), and the radiation pressure force must generate a displacement large enough to change the optical properties of the system ($g_0 > κ$). The challenge of achieving this "vacuum strong coupling" has prevented experiments from demonstrating single-photon interactions. In this work we show that by adding a coherent feedback channel to a slow mechanical system ($ω_m < κ$) that is weakly nonlinear ($g_0 < κ$), two spatially separated single photons can be made to effectively interact with each other deterministically through the mechanical motion of a resonator. To numerically analyze our system, we must solve Schrödinger's equation for the state of an optomechanical system coupled to a long waveguide feeback channel. We implement a matrix product state approach to keep track of and evolve the complete quantum state of the system in an efficient way. We analyze the process semiclassically and then solve the full quantum dynamics numerically to find a cross-over between the semiclassical and quantum regimes of optomechanics. Finally we analyze the experimental prospects for implementing this protocol.

quant-ph↗

arXiv2017

Optomechanical antennas for on-chip beam-steering

Rapid and low-power control over the direction of a radiating light field is a major challenge in photonics and a key enabling technology for emerging sensors and free-space communication links. Current approaches based on bulky motorized components are limited by their high cost and power consumption, while on-chip optical phased arrays face challenges in scaling and programmability. Here, we propose a solid-state approach to beam-steering using optomechanical antennas. We combine recent progress in simultaneous control of optical and mechanical waves with remarkable advances in on-chip optical phased arrays to enable low-power and full two-dimensional beam-steering of monochromatic light. We present a design of a silicon photonic system made of photonic-phononic waveguides that achieves 44$^{\circ}$ field of view with $880$ resolvable spots by sweeping the mechanical wavelength with about a milliwatt of mechanical power. Using mechanical waves as nonreciprocal, active gratings allows us to quickly reconfigure the beam direction, beam shape, and the number of beams. It also enables us to distinguish between light that we send and receive.

physics.optics↗

arXiv2017

Millimeter-wave interconnects for microwave-frequency quantum machines

Superconducting microwave circuits form a versatile platform for storing and manipulating quantum information. A major challenge to further scalability is to find approaches for connecting these systems over long distances and at high rates. One approach is to convert the quantum state of a microwave circuit to optical photons that can be transmitted over kilometers at room temperature with little loss. Many proposals for electro-optic conversion between microwave and optics use optical driving of a weak three-wave mixing nonlinearity to convert the frequency of an excitation. Residual absorption of this optical pump leads to heating, which is problematic at cryogenic temperatures. Here we propose an alternative approach where a nonlinear superconducting circuit is driven to interconvert between microwave-frequency and millimeter-wave-frequency (300 GHz) photons. To understand the potential for quantum conversion between microwave and mm-wave photons, we consider the driven four-wave mixing quantum dynamics of nonlinear circuits. In contrast to the linear dynamics of the driven three-wave mixing converters, the proposed four-wave mixing converter has nonlinear decoherence channels that lead to a more complex parameter space of couplings and pump powers that we map out. We consider physical realizations of such converter circuits by deriving theoretically the upper bound on the maximum obtainable nonlinear coupling between any two modes in a lossless circuit, and synthesizing an optimal circuit based on realistic materials that saturates this bound. Our proposed circuit dissipates less than $10^{-9}$ times the energy of current electro-optic converters per qubit. Finally, we outline the quantum link budget for optical, microwave, and mm-wave connections, showing that our approach is viable for realizing interconnected quantum processors for intracity or quantum datacenter environments.

quant-ph↗

arXiv2017

Engineering phonon leakage in nanomechanical resonators

We propose and experimentally demonstrate a technique for coupling phonons out of an optomechanical crystal cavity. By designing a perturbation that breaks a symmetry in the elastic structure, we selectively induce phonon leakage without affecting the optical properties. It is shown experimentally via cryogenic measurements that the proposed cavity perturbation causes loss of phonons into mechanical waves on the surface of silicon, while leaving photon lifetimes unaffected. This demonstrates that phonon leakage can be engineered in on-chip optomechanical systems. We experimentally observe large fluctuations in leakage rates that we attribute to fabrication disorder and verify this using simulations. Our technique opens the way to engineering more complex on-chip phonon networks utilizing guided mechanical waves to connect quantum systems.

physics.optics↗

arXiv2016

Release-free silicon-on-insulator cavity optomechanics

We demonstrate optically coupled nanomechanical resonators fabricated on silicon-on-insulator. Silicon fin waveguides are used to control the dispersion of mechanical waves and engineer localized resonances by modulation of the fin properties. A photonic crystal cavity is designed to localize laser light near the fin and the mechanical motion is read out and modified by radiation pressure back-action. We expect devices and systems made from similar structures to enable co-integration of signal transduction and processing capabilities via electronic, photonic, and phononic degrees freedom in a single scalable platform.

physics.optics↗

arXiv2016

High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate

Future quantum networks in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the device. We demonstrate high quality factor ring, disk and photonic crystal resonators using a hybrid silicon-on-lithium-niobate material system. Optical quality factors up to 730,000 are achieved, corresponding to propagation loss of 0.8 dB/cm. We also use the electro-optic effect to modulate the resonance frequency of a photonic crystal cavity, achieving a electro-optic modulation coefficient between 1 and 2 pm/V. In addition to quantum technology, we expect that our results will be useful both in traditional silicon photonics applications and in high-sensitivity acousto-optic devices.

physics.optics↗

arXiv2016

Thermal Brillouin noise observed in silicon optomechanical waveguide

Stimulated Brillouin scattering was recently observed in nanoscale silicon waveguides. Surprisingly, thermally-driven photon-phonon conversion in these structures had not yet been reported. Here, we inject an optical probe in a suspended silicon waveguide and measure its phase fluctuations at the output. We observe mechanical resonances around 8 GHz with a scattering efficiency of $10^{-5} \, \text{m}^{-1}$ and a signal-to-noise ratio of 2. The observations are in agreement with a theory of noise in these waveguides as well as with stimulated measurements. Our scheme may simplify measurements of mechanical signatures in nanoscale waveguides and is a step towards a better grasp of thermal noise in these new continuum optomechanical systems.

physics.optics↗

arXiv2016

Prospects for quantum acoustics with phononic crystal devices

Nanomechanical systems made from phononic crystals can act as highly coherent microwave-frequency circuits at cryogenic temperatures. However, generating sufficient coupling between these devices and microwave superconducting quantum circuits is challenging due to the vastly different length scales of acoustic and electrical excitations. Here we demonstrate a general recipe for calculating these interactions and show that large piezoelectric coupling rates between microwave superconducting circuits containing Josephson junctions and nanoscale phononic resonances are possible, suggesting a route to phononic crystal circuits and systems that are nonlinear at the single-phonon level.

quant-ph↗

arXiv2016

Design of nanobeam photonic crystal resonators for a silicon-on-lithium-niobate platform

We outline the design for a photonic crystal resonator made in a hybrid Silicon/Lithium Niobate material system. Using the index contrast between silicon and lithium niobate, it is possible to guide and confine photonic resonances in a thin film of silicon bonded on top of lithium niobate. Quality factors greater than $10^6$ at optical wavelength scale mode volumes are achievable. We show that patterning electrodes on such a system can yield an electro-optic coupling rate of 0.6 GHz/V (4 pm/V).

physics.optics↗

arXiv2016

Guided acoustic and optical waves in silicon-on-insulator for Brillouin scattering and optomechanics

We numerically study silicon waveguides on silica showing that it is possible to simultaneously guide optical and acoustic waves in the technologically important silicon on insulator (SOI) material system. Thin waveguides, or fins, exhibit geometrically softened mechanical modes at gigahertz frequencies with phase velocities below the Rayleigh velocity in glass, eliminating acoustic radiation losses. We propose slot waveguides on glass with telecom optical frequencies and strong radiation pressure forces resulting in Brillouin gains on the order of 500 and 50,000 1/(Wm) for backward and forward Brillouin scattering, respectively.

physics.optics↗

arXiv2015

Nonlinear radiation pressure dynamics in an optomechanical crystal

Utilizing a silicon nanobeam optomechanical crystal, we investigate the attractor diagram arising from the radiation pressure interaction between a localized optical cavity at $λ= 1552$nm and a mechanical resonance at $ω/2π= 3.72$GHz. At a temperature of $T \approx 10$K, highly nonlinear driving of mechanical motion is observed via continuous wave optical pumping. Introduction of a time-dependent (modulated) optical pump is used to steer the system towards an otherwise inaccessible dynamically stable attractor in which mechanical self-oscillation occurs for an optical pump red-detuned from the cavity resonance. An analytical model incorporating thermo-optic effects due to optical absorption heating is developed, and found to accurately predict the measured device behavior.

physics.optics↗

arXiv2014

Phonon counting and intensity interferometry of a nanomechanical resonator

Using an optical probe along with single photon detection we have performed effective phonon counting measurements of the acoustic emission and absorption processes in a nanomechanical resonator. Applying these measurements in a Hanbury Brown and Twiss set-up, phonon correlations of the nanomechanical resonator are explored from below to above threshold of a parametric instability leading to self-oscillation of the resonator. Discussion of the results in terms of a "phonon laser", and analysis of the sensitivity of the phonon counting technique are presented.

quant-ph↗

arXiv2014

Linear and nonlinear capacitive coupling of electro-opto-mechanical photonic crystal cavities

We fabricate and characterize a microscale silicon electro-opto-mechanical system whose mechanical motion is coupled capacitively to an electrical circuit and optically via radiation pressure to a photonic crystal cavity. To achieve large electromechanical interaction strength, we implement an inverse shadow mask fabrication scheme which obtains capacitor gaps as small as 30 nm while maintaining a silicon surface quality necessary for minimizing optical loss. Using the sensitive optical read-out of the photonic crystal cavity, we characterize the linear and nonlinear capacitive coupling to the fundamental 63 MHz in-plane flexural motion of the structure, showing that the large electromechanical coupling in such devices may be suitable for realizing efficient microwave-to-optical signal conversion.

physics.optics↗

arXiv2014

Thermalization properties at mK temperatures of a nanoscale optomechanical resonator with acoustic-bandgap shield

Optical measurements of a nanoscale silicon optomechanical crystal cavity with a mechanical resonance frequency of 3.6GHz are performed at sub-kelvin temperatures. We infer optical-absorption-induced heating and damping of the mechanical resonator from measurements of phonon occupancy and motional sideband asymmetry. At the lowest probe power and lowest fridge temperature (10mK), the localized mechanical resonance is found to couple at a rate of 400Hz (Q=9x10^6) to a thermal bath of temperature 270mK. These measurements indicate that silicon optomechanical crystals cooled to millikelvin temperatures should be suitable for a variety of experiments involving coherent coupling between photons and phonons at the single quanta level.

quant-ph↗

arXiv2014

Two-dimensional phononic-photonic bandgap optomechanical crystal cavity

We present the fabrication and characterization of an artificial crystal structure formed from a thin-film of silicon which has a full phononic bandgap for microwave X-band phonons and a two-dimensional pseudo-bandgap for near-infrared photons. An engineered defect in the crystal structure is used to localize optical and mechanical resonances in the bandgap of the planar crystal. Two-tone optical spectroscopy is used to characterize the cavity system, showing a large vacuum coupling rate of 220kHz between the fundamental optical cavity resonance at 195THz and a co-localized mechanical resonance at 9.3GHz.

physics.optics↗

arXiv2013

Highly efficient coupling from an optical fiber to a nanoscale silicon optomechanical cavity

We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in principle, any photonic chip with refractive index greater than that of the optical fiber. Here we demonstrate single-sided cavity coupling with a total fiber-to-cavity optical power coupling efficiency of 85%.

physics.optics↗