arXiv subjects

Andy Thomas

Publications and source records attributed to Andy Thomas.

53 records · Page 3Linked to original sources

arXiv2014

Controlling boron redistribution in CoFeB/MgO magnetic tunnel junctions during annealing by variation of cap layer materials and MgO deposition methods

Magnetic tunnel junctions with crystalline MgO tunnel barrier and amorphous CoFeB electrodes received much attention due to their high tunnel magneto resistance ratio at room temperature. One important parameter for achieving high tunnel magneto resistance ratios is to control the boron diffusion from the electrodes especially during post growth annealing. By high resolution transmission electron microscopy and electron energy loss spectroscopy techniques we show that the cap layer material adjacent to the electrodes and the MgO deposition method are crucial to control boron redistribution. It is pointed out, that Ta cap layers acts as sinks for boron during annealing in contrast to Ru layers. Furthermore, radio frequency sputtered MgO tunneling barriers contain a rather high concentraion of boron in trigonal [BO$_3$]$^{3-}$ - environment after annealing in contrast to electron beam evaporated MgO which is virtually free from any boron. Our data further indicate that neither boron nor oxygen-vacancy-related gap states in the bulk of MgO barriers affect spin polarized transport for tunnel magneto resistance ratios at the level of 200%.

cond-mat.mtrl-sci↗

arXiv2014

On/off switching of bit readout in bias-enhanced tunnel magneto-Seebeck effect

Thermoelectric effects in magnetic tunnel junctions are currently an attractive research topic. Here, we demonstrate that the tunnel magneto-Seebeck effect (TMS) in CoFeB/MgO/CoFeB tunnel junctions can be switched on to a logic 1 state and off to 0 by simply changing the magnetic state of the CoFeB electrodes. We enable this new functionality of magnetic tunnel junctions by combining a thermal gradient and an electric field. This new technique unveils the bias-enhanced tunnel magneto-Seebeck effect, which can serve as the basis for logic devices or memories in a green information technology with a pure thermal write and read process. Furthermore, the thermally generated voltages that are referred to as the Seebeck effect are well known to sensitively depend on the electronic structure and therefore have been valued in solid-state physics for nearly one hundred years. Here, we lift Seebeck's historic discovery from 1821 to a new level of current spintronics. Our results show that the signal crosses zero and can be adjusted by tuning a bias voltage that is applied between the electrodes of the junction; hence, the name of the effect is bias-enhanced tunnel magneto-Seebeck effect (bTMS). Via the spin- and energy-dependent transmission of electrons in the junction, the bTMS effect can be configured using the bias voltage with much higher control than the tunnel magnetoresistance (TMR) and even completely suppressed for only one magnetic configuration, which is either parallel (P) or anti-parallel (AP). This option allows a readout contrast for the magnetic information of -3000% at room temperature while maintaining a large signal for one magnetic orientation. This contrast is much larger than the value that can be obtained using the TMR effect. Moreover, our measurements are a step towards the experimental realization of high TMS ratios, which are predicted for specific Co-Fe compositions.

cond-mat.mes-hall↗

arXiv2014

Magnetic anisotropy of thin sputtered MgB2 films on MgO substrates in high magnetic fields

We investigated the magnetic anisotropy ratio of thin sputtered polycrystalline MgB2 films on MgO substrates. Using high magnetic field measurements, we estimated an anisotropy ratio of 1.35 for T=0 K with an upper critical field of 31.74 T in the parallel case and 23.5 T in the perpendicular case. Direct measurements of a magnetic-field sweep at 4.2 K show a linear behavior, confirmed by a linear fit for magnetic fields perpendicular to the film plane. Furthermore, we observed a change of up to 12% of the anisotropy ratio in dependence of the film thickness.

cond-mat.mtrl-sci↗

arXiv2013

Time-resolved measurement of the tunnel magneto-Seebeck effect in a single magnetic tunnel junction

Recently, several groups have reported spin-dependent thermoelectric effects in magnetic tunnel junctions. In this paper, we present a setup for time-resolved measurements of thermovoltages and thermocurrents of a single micro- to nanometer-scaled tunnel junction. An electrically modulated diode laser is used to create a temperature gradient across the tunnel junction layer stack. This laser modulation technique enables the recording of time-dependent thermovoltage signals with a temporal resolution only limited by the preamplifier for the thermovoltage. So far, time-dependent thermovoltage could not be interpreted. Now, with the setup presented in this paper, it is possible to distinguish different Seebeck voltage contributions to the overall measured voltage signal in the μs time regime. A model circuit is developed that explains those voltage contributions on different sample types. Further, it will be shown that a voltage signal arising from the magnetic tunnel junction can only be observed when the laser spot is directly centered on top of the magnetic tunnel junction, which allows a lateral separation of the effects.

cond-mat.mes-hall↗

arXiv2013

Parameter space for thermal spin-transfer torque

Thermal spin-transfer torque describes the manipulation of the magnetization by the application of a heat flow. The effect has been calculated theoretically by Jia et al. in 2011. It is found to require large temperature gradients in the order of Kelvins across an ultra thin MgO barrier. In this paper, we present results on the fabrication and the characterization of magnetic tunnel junctions with 3 monolayer thin MgO barriers. The quality of the interfaces at different growth conditions is studied quantitatively via high-resolution transmission electron microscopy imaging. We demonstrate tunneling magneto resistance ratios of up to 55% to 64% for 3 to 4 monolayer barrier thickness. Magnetic tunnel junctions with perpendicular magnetization anisotropy show spin-transfer torque switching with a critical current of 0.2 MA/cm$^2$. The thermally generated torque is calculated ab initio using the Korringa-Kohn-Rostoker and non-equilibrium Green's function method. Temperature gradients generated from femtosecond laser pulses were simulated using COMSOL, revealing gradients of 20 K enabling thermal spin-transfer-torque switching.

cond-mat.mes-hall↗

arXiv2012

Insights into ultrafast demagnetization in pseudo-gap half metals

Interest in femtosecond demagnetization experiments was sparked by Bigot's discovery in 1995. These experiments unveil the elementary mechanisms coupling the electrons' temperature to their spin order. Even though first quantitative models describing ultrafast demagnetization have just been published within the past year, new calculations also suggest alternative mechanisms. Simultaneously, the application of fast demagnetization experiments has been demonstrated to provide key insight into technologically important systems such as high spin polarization metals, and consequently there is broad interest in further understanding the physics of these phenomena. To gain new and relevant insights, we perform ultrafast optical pump-probe experiments to characterize the demagnetization processes of highly spin-polarized magnetic thin films on a femtosecond time scale. Previous studies have suggested shifting the Fermi energy into the center of the gap by tuning the number of electrons and thereby to study its influence on spin-flip processes. Here we show that choosing isoelectronic Heusler compounds (Co2MnSi, Co2MnGe and Co2FeAl) allows us to vary the degree of spin polarization between 60% and 86%. We explain this behavior by considering the robustness of the gap against structural disorder. Moreover, we observe that Co-Fe-based pseudo gap materials, such as partially ordered Co-Fe-Ge alloys and also the well-known Co-Fe-B alloys, can reach similar values of the spin polarization. By using the unique features of these metals we vary the number of possible spin-flip channels, which allows us to pinpoint and control the half metals electronic structure and its influence onto the elementary mechanisms of ultrafast demagnetization.

cond-mat.mtrl-sci↗

arXiv2011

Spin polarized tunneling in MgO-based tunnel junctions with superconducting electrodes

We prepared magnetic tunnel junctions with one ferromagnetic and one superconducting Al-Si electrode. Pure cobalt electrodes were compared with a Co-Fe-B alloy and the Heusler compound Co2FeAl. The polarization of the tunneling electrons was determined using the Maki-Fulde-model and is discussed along with the spin-orbit scattering and the total pair-breaking parameters. The junctions were post-annealed at different temperatures to investigate the symmetry filtering mechanism responsible for the giant tunneling magnetoresistance ratios in Co-Fe-B/ MgO/ Co-Fe-B junctions.

cond-mat.mtrl-sci↗

arXiv2011

Local charge and spin currents in magnetothermal landscapes

A scannable laser beam is used to generate local thermal gradients in metallic (Co2FeAl) or insulating (Y3Fe5O12) ferromagnetic thin films. We study the resulting local charge and spin currents that arise due to the anomalous Nernst effect (ANE) and the spin Seebeck effect (SSE), respectively. In the local ANE experiments, we detect the voltage in the Co2FeAl thin film plane as a function of the laser spot position and external magnetic field magnitude and orientation. The local SSE effect is detected in a similar fashion by exploiting the inverse spin Hall effect in a Pt layer deposited on top of the Y3Fe5O12. Our findings establish local thermal spin and charge current generation as well as spin caloritronic domain imaging.

cond-mat.mtrl-sci↗

arXiv2011

Seebeck Effect in Magnetic Tunnel Junctions

Creating temperature gradients in magnetic nanostructures has resulted in a new research direction, i.e., the combination of magneto- and thermoelectric effects. Here, we demonstrate the observation of one important effect of this class: the magneto-Seebeck effect. It is observed when a magnetic configuration changes the charge based Seebeck coefficient. In particular, the Seebeck coefficient changes during the transition from a parallel to an antiparallel magnetic configuration in a tunnel junction. In that respect, it is the analog to the tunneling magnetoresistance. The Seebeck coefficients in parallel and antiparallel configuration are in the order of the voltages known from the charge-Seebeck effect. The size and sign of the effect can be controlled by the composition of the electrodes' atomic layers adjacent to the barrier and the temperature. Experimentally, we realized 8.8 % magneto-Seebeck effect, which results from a voltage change of about -8.7 μV/K from the antiparallel to the parallel direction close to the predicted value of -12.1 μV/K.

cond-mat.mtrl-sci↗

arXiv2010

Tunnel magnetoresistance in alumina, magnesia and composite tunnel barrier magnetic tunnel junctions

Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we found were 73% for alumina and 323% for magnesia-based tunnel junctions. Additionally, tunnel junctions with a unified layer stack were prepared for the three different barriers. In these systems, the tunnel magnetoresistance ratios at optimum annealing temperatures were found to be 65% for alumina, 173% for magnesia, and 78% for the composite tunnel barriers. The similar tunnel magnetoresistance ratios of the tunnel junctions containing alumina provide evidence that coherent tunneling is suppressed by the alumina layer in the composite tunnel barrier.

cond-mat.mtrl-sci↗

arXiv2010

Structural and magnetic properties of Co-Mn-Sb thin films

Thin Co-Mn-Sb films of different compositions were investigated and utilized as electrodes in alumina based magnetic tunnel junctions with CoFe counter electrode. The preparation conditions were optimized with respect to magnetic and structural properties. The Co-Mn-Sb/Al-O interface was analyzed by X-ray absorption spectroscopy and magnetic circular dichroism with particular focus on the element-specific magnetic moments. Co-Mn-Sb crystallizes in different complex cubic structures depending on its composition. The magnetic moments of Co and Mn are ferromagnetically coupled in all cases. A tunnel magneto resistance ratio of up to 24 % at 13K was found and indicates that Co-Mn-Sb is not a ferromagnetic half-metal. These results are compared to recent works on the structure and predictions of the electronic properties.

cond-mat.mtrl-sci↗

arXiv2010

Magnetic microstructure and magnetotransport in Co2FeAl Heusler compound thin films

We correlate simultaneously recorded magnetotransport and spatially resolved magneto optical Kerr effect (MOKE) data in Co2FeAl Heusler compound thin films micropatterned into Hall bars. Room temperature MOKE images reveal the nucleation and propagation of domains in an externally applied magnetic field and are used to extract a macrospin corresponding to the mean magnetization direction in the Hall bar. The anisotropic magnetoresistance calculated using this macrospin is in excellent agreement with magnetoresistance measurements. This suggests that the magnetotransport in Heusler compounds can be adequately simulated using simple macrospin models, while the magnetoresistance contribution due to domain walls is of negligible importance.

cond-mat.mtrl-sci↗

arXiv2010

Fabrication of superconducting MgB2 thin films by magnetron co-sputtering on (001) MgO substrates

We fabricated superconducting MgB2 thin films on (001) MgO substrates. The samples were prepared by magnetron rf and dc co-sputtering on heated substrates. They were annealed ex-situ for one hour at temperatures between 450°C and 750°C. We will show that the substrate temperature during the sputtering process and the post annealing temperatures play a crucial role in forming MgB2 superconducting thin films. We achieved a critical onset temperature of 27.1K for a film thickness of 30nm. The crystal structures were measured by x-ray diffraction.

cond-mat.supr-con↗

arXiv2010

Tunneling spectroscopy probing magnetic and nonmagnetic electrodes in tunnel junctions

Tunneling spectroscopy is applied to tunnel junctions with only one or no ferromagnetic electrode to study the excitation of quasi particles in magnetic tunnel junctions. The bias dependence is investigated with high accuracy by inelastic electron tunneling spectroscopy. Both types of junctions show a zero bias anomaly that is different in size and sign compared to magnetic tunnel junctions, i.e. junctions with two ferromagnetic electrodes. A pronounced difference is also found depending on the material that is probed by the tunneling electrons, which might be attributed to the excitation of magnons.

cond-mat.mtrl-sci↗

arXiv2010

Temperature and bias voltage dependence of Co/Pd multilayer-based magnetic tunnel junctions with perpendicular magnetic anisotropy

Temperature- and bias voltage-dependent transport measurements of magnetic tunnel junctions (MTJs) with perpendicularly magnetized Co/Pd electrodes are presented. Magnetization measurements of the Co/Pd multilayers are performed to characterize the electrodes. The effects of the Co layer thickness in the Co/Pd bilayers, the annealing temperature, the Co thickness at the MgO barrier interface, and the number of bilayers on the tunneling magneto resistance (TMR) effect are investigated. TMR-ratios of about 11 % at room temperature and 18.5 % at 13 K are measured and two well-defined switching fields are observed. The results are compared to measurements of MTJs with Co-Fe-B electrodes and in-plane anisotropy.

cond-mat.mtrl-sci↗

arXiv2008

Current induced resistance change of magnetic tunnel junctions with ultra-thin MgO tunnel barriers

Ultra-thin magnetic tunnel junctions with low resistive MgO tunnel barriers are prepared to examine their stability under large current stress. The devices show magnetoresistance ratios of up to 110 % and an area resistance product of down to 4.4 ohm micrometer squared. If a large current is applied, a reversible resistance change is observed, which can be attributed to two different processes during stressing and one relaxation process afterwards. Here, we analyze the time dependence of the resistance and use a simple model to explain the observed behavior. The explanation is further supported by numerical fits to the data in order to quantify the timescales of the involved phenomena.

cond-mat.mtrl-sci↗

arXiv2006

Inverted spin polarization of Heusler alloys for new spintronic devices

A new magnetic logic overcomes the major limitations of field programmable gate arrays while having a 50% smaller unit cell than conventional designs utilizing magnetic tunnel junctions with one Heusler alloy electrode. These show positive and negative TMR values at different bias voltages at room temperature which generally adds an additional degree of freedom to all spintronic devices.

cond-mat.mtrl-sci↗