arXiv subjects

Artem Ryabov

Publications and source records attributed to Artem Ryabov.

At least 37 records · Page 2Linked to original sources

arXiv2022

Solitons in overdamped Brownian dynamics

Solitons are commonly known as waves that propagate without dispersion. Here we show that they can occur for driven overdamped Brownian dynamics of hard spheres in periodic potentials at high densities. The solitons manifest themselves as periodic sequences of different assemblies of particles moving in the limit of zero noise, where transport of single particles is not possible. They give rise to particle currents at even low temperature that appear in band-like structures around certain hard-sphere diameters. At high temperatures, the band-like structures are washed out by the noise, but the particle transport is still dominated by the solitons. All these predicted features should occur in a broad class of periodic systems and are amenable to experimental tests.

cond-mat.stat-mech↗

arXiv2022

Phase diffusion and noise temperature of a microwave amplifier based on single unshunted Josephson junction

High-gain microwave amplifiers operating near quantum limit are crucial for development of quantum technology. However, a systematic theoretical modeling and simulations of their performance represent rather challenging tasks due to the occurrence of colored noises and nonlinearities in the underlying circuits. Here, we develop a response theory for such an amplifier whose circuit dynamics is based on nonlinear oscillations of an unshunted Josephson junction. The theory accounts for a subtle interplay between exponentially damped fluctuations around the stable limit cycle and the nonlinear dynamics of the limit cycle phase. The amplifier gain and noise spectrum are derived assuming a colored voltage noise at the circuit resistor. The derived expressions are generally applicable to any system whose limit cycle dynamics is perturbed by a colored noise and a harmonic signal. We also critically assess reliabilities of numerical methods of simulations of the corresponding nonlinear Langevin equations, where even reliable discretization schemes might introduce errors significantly affecting simulated characteristics at the peak performance.

cond-mat.stat-mech↗

arXiv2021

Driven transport of soft Brownian particles through pore-like structures: Effective size method

Single-file transport in pore-like structures constitute an important topic for both theory and experiment. For hardcore interacting particles, a good understanding of the collective dynamics has been achieved recently. Here we study how softness in the particle interaction affects the emergent transport behavior. To this end, we investigate the driven Brownian motion of particles in a periodic potential. The particles interact via a repulsive softcore potential with a shape corresponding to a smoothed rectangular barrier. This shape allows us to elucidate effects of mutual particle penetration and particle crossing in a controlled manner. We find that even weak deviations from the hardcore case can have a strong impact on the particle current. Despite this fact, the knowledge about the transport in a corresponding hardcore system is shown to be useful to describe and interpret our findings for the softcore case. This is achieved by assigning a thermodynamic effective size to the particles based on the equilibrium density functional of hard spheres.

cond-mat.stat-mech↗

arXiv2021

Fluctuations in heat engines

At the dawn of thermodynamics, Carnot's constraint on efficiency of heat engines stimulated the formulation of one of the most universal physical principles, the second law of thermodynamics. In recent years, the field of heat engines acquired a new twist due to enormous efforts to develop and describe microscopic machines based on systems as small as single atoms. At microscales, fluctuations are an inherent part of dynamics and thermodynamic variables such as work and heat fluctuate. Novel probabilistic formulations of the second law imply general symmetries and limitations for the fluctuating output power and efficiency of the small heat engines. Will their complete understanding ignite a similar revolution as the discovery of the second law? Here, we review the known general results concerning fluctuations in the performance of small heat engines. To make the discussion more transparent, we illustrate the main abstract findings on exactly solvable models and provide a thorough theoretical introduction for newcomers to the field.

cond-mat.stat-mech↗

arXiv2021

Equilibrium Stochastic Delay Processes

Stochastic processes with temporal delay play an important role in science and engineering whenever finite speeds of signal transmission and processing occur. However, an exact mathematical analysis of their dynamics and thermodynamics is available for linear models only. We introduce a class of stochastic delay processes with nonlinear time-local forces and linear time-delayed forces that obey fluctuation theorems and converge to a Boltzmann equilibrium at long times. From the point of view of control theory, such ``equilibrium stochastic delay processes'' are stable and energetically passive, by construction. Computationally, they provide diverse exact constraints on general nonlinear stochastic delay problems and can, in various situations, serve as a starting point for their perturbative analysis. Physically, they admit an interpretation in terms of an underdamped Brownian particle that is either subjected to a time-local force in a non-Markovian thermal bath or to a delayed feedback force in a Markovian thermal bath. We illustrate these properties numerically for a setup familiar from feedback cooling and point out experimental implications.

cond-mat.stat-mech↗

arXiv2021

Hydrodynamic interactions can induce jamming in flow-driven systems

Hydrodynamic interactions between fluid-dispersed particles are ubiquitous in soft matter and biological systems and they give rise to intriguing collective phenomena. While it was reported that these interactions can facilitate force-driven particle motion over energetic barriers, here we show the opposite effect in a flow-driven system, i.e. that hydrodynamic interactions hinder transport across barriers. We demonstrate this result by combining experiments and theory. In the experiments, we drive colloidal particles using rotating optical traps, thus creating a vortex flow in the corotating reference frame. We observe a jamming-like decrease of particle currents with density for large barriers between traps. The theoretical model shows that this jamming arises from hydrodynamic interactions between the particles. The impact of hydrodynamic interactions is reversed compared to force-driven motion, suggesting that our findings are a generic feature of flow-driven transport.

cond-mat.soft↗

arXiv2020

Cycle completion times probe interactions with environment

Recent measurements of durations of non-equilibrium processes provide valuable information on microscopic mechanisms and energetics. Comprehensive theory for corresponding experiments so far is well developed for single-particle systems only. Little is known for interacting systems in non-equilibrium environments. Here, we introduce and study a basic model for cycle processes interacting with an environment that can exhibit a net particle flow. We find a surprising richness of cycle time variations with environmental conditions. This manifests itself in unequal cycle times $τ^+$ and $τ^-$ in forward and backward cycle direction with both asymmetries $τ^-<τ^+$ and $τ^->τ^+$, speeding up of backward cycles by interactions, and dynamical phase transitions, where cycle times become multimodal functions of the bias. The model allows us to relate these effects to specific microscopic mechanisms, which can be helpful for interpreting experiments.

cond-mat.stat-mech↗

arXiv2020

Statistics of work performed by optical tweezers with general time-variation of their stiffness

We derive an exact expression for the probability density of work done on a particle that diffuses in a parabolic potential with a stiffness varying by an arbitrary piecewise constant protocol. Based on this result, the work distribution for time-continuous protocols of the stiffness can be determined up to any degree of accuracy. This is achieved by replacing the continuous driving by a piecewise constant one with a number $n$ of positive or negative steps of increasing or decreasing stiffness. With increasing $n$, the work distributions for the piecewise protocols approach that for the continuous protocol. The moment generating function of the work is given by the inverse square root of a polynomial of degree $n$, whose coefficients are efficiently calculated from a recurrence relation. The roots of the polynomials are real and positive (negative) steps of the protocol are associated with negative (positive) roots. Using these properties the inverse Laplace transform of the moment generating function is carried out explicitly. Fluctuation theorems are used to derive further properties of the polynomials and their roots.

cond-mat.stat-mech↗

arXiv2020

Nonequilibrium transport and phase transitions in driven diffusion of interacting particles

Driven diffusive systems constitute paradigmatic models of nonequilibrium physics. Among them, a driven lattice gas known as the asymmetric simple exclusion process (ASEP) is the most prominent example for which many intriguing exact results have been obtained. After summarizing key findings, including the mapping of the ASEP to quantum spin chains, we discuss the recently introduced Brownian asymmetric simple exclusion process (BASEP) as a related class of driven diffusive system with continuous space dynamics. In the BASEP, driven Brownian motion of hardcore-interacting particles through one-dimensional periodic potentials is considered. We study whether current-density relations of the BASEP can be considered as generic for arbitrary periodic potentials and whether repulsive particle interactions other than hardcore lead to similar results. Our findings suggest that shapes of current-density relations are generic for single-well periodic potentials and can always be attributed to the interplay of a barrier reduction, blocking and exchange symmetry effect. This implies that in general up to five different phases of nonequilibrium steady states are possible for such potentials. The phases can occur in systems coupled to particle reservoirs, where the bulk density is the order parameter. For multiple-well periodic potentials, more complex current-density relations are possible and more phases can appear. Taking a repulsive Yukawa potential as an example, we show that the effects of barrier reduction and blocking on the current are also present. The exchange symmetry effect requires hardcore interactions and we demonstrate that it can still be identified when hardcore interactions are combined with weak Yukawa interactions.

cond-mat.stat-mech↗

arXiv2019

Single-file transport in periodic potentials: The Brownian asymmetric exclusion process

Single-file Brownian motion in periodic structures is an important process in nature and technology, which becomes increasingly amenable for experimental investigation under controlled conditions. To explore and understand generic features of this motion, the Brownian asymmetric simple exclusion process (BASEP) was recently introduced. The BASEP refers to diffusion models, where hard spheres are driven by a constant drag force through a periodic potential. Here, we derive general properties of the rich collective dynamics in the BASEP. Average currents in the steady state change dramatically with the particle size and density. For an open system coupled to particle reservoirs, extremal current principles predict various nonequilibrium phases, which we verify by Brownian dynamics simulations. For general pair interactions we discuss connections to single-file transport by traveling-wave potentials and prove the impossibility of current reversals in systems driven by a constant drag and by traveling waves.

cond-mat.stat-mech↗

arXiv2019

Living on the edge of instability

Statistical description of stochastic dynamics in highly unstable potentials is strongly affected by properties of divergent trajectories, that quickly leave meta-stable regions of the potential landscape and never return. Using ideas from theory of Q-processes and quasi-stationary distributions, we analyze position statistics of non-diverging trajectories. We discuss two limit distributions which can be considered as (formal) generalizations of the Gibbs canonical distribution to highly unstable systems. Even though the associated effective potentials differ only slightly, properties of the two distributions are fundamentally different for all highly unstable system. The distribution for trajectories conditioned to diverge in an infinitely distant future is localized and light-tailed. The other distribution, describing trajectories surviving in the meta-stable region at the instant of conditioning, is heavy-tailed. The exponent of the corresponding power-law tail is determined by the leading divergent term of the unstable potential. We discuss different equivalent forms of the two distributions and derive properties of the effective statistical force arising in the ensemble of non-diverging trajectories after the Doob h-transform. The obtained explicit results generically apply to non-linear dynamical models with meta-stable states and fast kinetic transitions.

cond-mat.stat-mech↗

arXiv2019

Heat capacities of thermally manipulated mechanical oscillator at strong coupling

Coherent quantum oscillators are basic physical systems both in quantum statistical physics and quantum thermodynamics. Their realizations in lab often involve solid-state devices sensitive to changes in ambient temperature. We represent states of the solid-state optomechanical oscillator with temperature-dependent frequency by equivalent states of the mechanical oscillator with temperature-dependent energy levels. We interpret the temperature dependence as a consequence of strong coupling between the oscillator and the heat bath. We explore parameter regimes corresponding to anomalous behavior of mechanical and thermodynamic characteristics as a consequence of the strong coupling: (i) The localization and the purification induced by heating, and (ii) the negativity of two generalized heat capacities. The capacities can be used to witness non-linearity in the temperature dependency of the energy levels. Our phenomenological experimentally-oriented approach can stimulate development of new optomechanical and thermomechanical experiments exploring basic concepts of strong coupling thermodynamics.

quant-ph↗

arXiv2018

Diffusing Up the Hill: Dynamics and Equipartition in Highly Unstable Systems

Stochastic motion of particles in a highly unstable potential generates a number of diverging trajectories leading to undefined statistical moments of the particle position. This makes experiments challenging and breaks down a standard statistical analysis of unstable mechanical processes and their applications. A newly proposed approach takes advantage of the local characteristics of the most probable particle motion instead of the divergent averages. We experimentally verify its theoretical predictions for a Brownian particle moving near an inflection in a highly unstable cubic optical potential. The most-likely position of the particle atypically shifts against the force despite the trajectories diverge in the opposite direction. The local uncertainty around the most-likely position saturates even for strong diffusion and enables well-resolved position detection. Remarkably, the measured particle distribution quickly converges to the quasi-stationary one with the same atypical shift for different initial particle positions. The demonstrated experimental confirmation of the theoretical predictions approves the utility of local characteristics for highly unstable systems which can be exploited in thermodynamic processes to uncover energetics of unstable systems.

cond-mat.stat-mech↗

arXiv2018

Brownian asymmetric simple exclusion process

We study the driven Brownian motion of hard rods in a one-dimensional cosine potential with an amplitude large compared to the thermal energy. In a closed system, we find surprising features of the steady-state current in dependence of the particle density. The form of the current-density relation changes greatly with the particle size and can exhibit both a local maximum and minimum. The changes are caused by an interplay of a barrier reduction, blocking and exchange symmetry effect. The latter leads to a current equal to that of non-interacting particles for a particle size commensurate with the period length of the cosine potential. For an open system coupled to particle reservoirs, we predict five different phases of non-equilibrium steady states to occur. Our results show that the particle size can be of crucial importance for non-equilibrium phase transitions in driven systems. Possible experiments for demonstrating our findings are pointed out.

cond-mat.stat-mech↗

arXiv2018

Cycling tames power fluctuations near optimum efficiency

According to the laws of thermodynamics, no heat engine can beat the efficiency of a Carnot cycle. This efficiency traditionally comes with vanishing power output and practical designs, optimized for power, generally achieve far less. Recently, various strategies to obtain Carnot's efficiency at large power were proposed. However, a thermodynamic uncertainty relation implies that steady-state heat engines can operate in this regime only at the cost of large fluctuations that render them immensely unreliable. Here, we demonstrate that this unfortunate trade-off can be overcome by designs operating cyclically under quasi-static conditions. The experimentally relevant yet exactly solvable model of an overdamped Brownian heat engine is used to illustrate the formal result. Our study highlights that work in cyclic heat engines and that in quasi-static ones are different stochastic processes.

cond-mat.stat-mech↗

arXiv2018

Diverging, but negligible power at Carnot efficiency: theory and experiment

We discuss the possibility of reaching the Carnot efficiency by heat engines (HEs) out of quasi-static conditions at nonzero power output. We focus on several models widely used to describe the performance of actual HEs. These models comprise quantum thermoelectric devices, linear irreversible HEs, minimally nonlinear irreversible HEs, HEs working in the regime of low dissipation, over-damped stochastic HEs and an under-damped stochastic HE. Although some of these HEs can reach the Carnot efficiency at nonzero and even diverging power, the magnitude of this power is always negligible compared to the maximum power attainable in these systems. We provide conditions for attaining the Carnot efficiency in the individual models and explain practical aspects connected with reaching the Carnot efficiency at large power output. Furthermore, we show how our findings can be tested in practice using a standard Brownian HE realizable with available micromanipulation techniques.

cond-mat.stat-mech↗

arXiv2018

Brownian motion surviving in the unstable cubic potential and the role of Maxwell's demon

Trajectories of an overdamped particle in a highly unstable potential diverge so rapidly, that the variance of position grows much faster than its mean. Description of the dynamics by moments is therefore not informative. Instead, we propose and analyze local directly measurable characteristics, which overcome this limitation. We discuss the most probable particle position (position of the maximum of the probability density) and the local uncertainty in an unstable cubic potential, both in the transient regime and in the long-time limit. The maximum shifts against the acting force as a function of time and temperature. Simultaneously, the local uncertainty does not increase faster than the observable shift. In the long-time limit, the probability density naturally attains a quasi-stationary form. We explain this process as a stabilization via the measurement-feedback mechanism, the Maxwell demon, which works as an entropy pump. Rules for measurement and feedback naturally arise from basic properties of the unstable dynamics. Observed thermally induced effects are inherent in unstable systems. Their detailed understanding will stimulate the development of stochastic engines and amplifiers and later, their quantum counterparts.

cond-mat.stat-mech↗

arXiv2017

Work and power fluctuations in a critical heat engine

We investigate fluctuations of output work for a class of Stirling heat engines with working fluid composed of interacting units and compare these fluctuations to an average work output. In particular, we focus on engine performance close to a critical point where Carnot's efficiency may be attained at a finite power as reported in [M. Campisi and R. Fazio, Nat. Commun. 7, 11895 (2016)]. We show that the variance of work output per cycle scales with the same critical exponent as the heat capacity of the working fluid. As a consequence, the relative work fluctuation diverges unless the output work obeys a rather strict scaling condition, which would be very hard to fulfill in practice. Even under this condition, the fluctuations of work and power do not vanish in the infinite system size limit. Large fluctuations of output work thus constitute inseparable and dominant element in performance of the macroscopic heat engines close to a critical point.

cond-mat.stat-mech↗