arXiv subjects

Benjamin Courtney-Barrer

Publications and source records attributed to Benjamin Courtney-Barrer.

15 recordsLinked to original sources

arXiv2026

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's VLTI has a history of record-breaking discoveries in astrophysics using high-angular resolution instrumentation. Its latest visitor instrument, the Asgard instrumental suite, is one key to further enhance the potential of the facility, particularly in the very near-infrared. It comprises four natively collaborating instruments: HEIMDALLR, a K-band fringe tracker, wavefront corrector and stellar interferometer in K band, with the same optics; Baldr, an H-band Zernike wavefront sensor; BIFROST, an Y-J-H-band photonic combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; and NOTT, an L-band nulling interferometer for imaging young planetary systems. Each of these instruments promise significant advances in their respective science goals that scale with their technical challenges and technology innovations. The integration of Asgard is planned in three phases. The first one (integration, commissioning of HEIMDALLR and Baldr) is successfully done. In this paper, we show an overview of the current progress of the integration of Asgard, the first results of the on-sky commissioning of HEIMDALLR and the future steps and observing policies for Asgard to serve the broader community.

astro-ph.IM↗

arXiv2026

Maximising the mid-infrared high-contrast performance of ELT/METIS despite water vapour seeing

The Mid-infrared ELT Imager and Spectrograph (METIS) will be equipped with a SCAO system delivering Strehl ratios above 90% at L band (3.5 - 4.1 um) and close to 99% at N band (8 - 13 um) on bright stars. Yet, the actual wavefront quality seen by the METIS coronagraphic modules used for high-contrast imaging will be significantly affected by water vapour seeing, which add a strong chromatic component to dry air seeing in the mid-infrared. We analysed two years of VLTI/GRAVITY fringe tracker archives to assess the variability of differential water vapour column density at millisecond timescales on ELT scales. Our analysis suggests that water vapour seeing will add a median wavefront error of about 175 nm rms at N band, consisting mostly of low-order aberrations, with around 150 nm rms of tip-tilt errors. If not corrected, this effect would degrade the achievable sensitivity limits in terms of contrast by more than two magnitudes. To mitigate this effect, we plan to deploy a focal-plane wavefront sensing and control algorithm based on an asymmetric pupil using a deep learning approach. After briefly discussing the practical impacts of focal-plane wavefront control in METIS, we compare the expected high-contrast imaging performance with and without focal-plane wavefront control.

astro-ph.IM↗

arXiv2026

Harmonic phase diagnostics of long secondary periods. Testing predictions of oscillatory convective dipole modes in the OGLE sample

Long secondary periods (LSPs) in luminous red giants remain the only major class of long-period stellar variability without a secure physical origin. Competing hypotheses include binaries with dusty companions and oscillatory convective dipole modes. We identify the physical and geometric conditions under which oscillatory convective dipole modes produce distinctive harmonic signatures that contrast with those expected from binary systems, and apply this diagnostic to a filtered subset of the OGLE-III LSP sample to identify examples consistent with oscillatory convective dipole modes. We model the geometric flux modulation from oscillatory convective dipole modes and map the range of inclinations, temperature amplitudes, and observing wavelengths for which harmonic features are observable. Using OGLE-III I-band light curves, we require statistically significant power at both sequence D and its harmonic, keeping a filtered sample of 249 stars (2.1% of the ridge-selected sample). We apply iterative Lomb-Scargle and weighted Fourier decomposition to isolate the fundamental and harmonic components. The relative phase ($Δϕ$) between these distinguishes secondary maxima predicted by an inclined dipole from secondary minima caused by eclipsing or ellipsoidal binary systems. The majority of high amplitude stars in the filtered subset show $Δϕ$ consistent with secondary minima produced by binary systems. However, a small but statistically non-negligible subset exhibits $Δϕ$ consistent with secondary maxima that are difficult to reconcile by eclipsing or ellipsoidal binaries, and instead match the geometric predictions for highly inclined, non-rotating oscillatory convective dipole modes with temperature amplitudes consistent with published models.

astro-ph.SR↗

arXiv2024

VLTI Unit Telescope coudé train vibration control upgrade for GRAVITY+

Scaling up interferometry to 8m collectors should smooth-out the optical piston perturbations and allow a slow fringe tracker to obtain high precision correction on faint targets. In practice, the GRAVITY fringe tracker still observes high frequency OPD components that limit the exposure time, its precision and limiting magnitude. Perturbations seem to come from mechanical vibrations in the train of mirrors. As part of the GRAVITY+ efforts, accelerometers were added to all the mirrors of the coudé train to compensate in real-time the optical path using the main delay lines. We show their effectiveness on vibrations peaks between 40 and 200Hz and outline prospects for the upgrade of the deformable mirrors and the beam-compressor differential delay lines.

astro-ph.IM↗

arXiv2024

METIS high-contrast imaging: from final design to manufacturing and testing

The Mid-infrared ELT Imager and Spectrograph (METIS) is one of the first-generation scientific instruments for the ELT, built under the supervision of ESO by a consortium of research institutes across and beyond Europe. Designed to cover the 3 to 13 $μ$m wavelength range, METIS had its final design reviewed in Fall 2022, and has then entered in earnest its manufacture, assembly, integration, and test (MAIT) phase. Here, we present the final design of the METIS high-contrast imaging (HCI) modes. We detail the implementation of the two main coronagraphic solutions selected for METIS, namely the vortex coronagraph and the apodizing phase plate, including their combination with the high-resolution integral field spectrograph of METIS, and briefly describe their respective backup plans (Lyot coronagraph and shaped pupil plate). We then describe the status of the MAIT phase for HCI modes, including a review of the final design of individual components such as the vortex phase masks, the grayscale ring apodizer, and the apodizing phase plates, as well as a description of their on-going performance tests and of our plans for system-level integration and tests. Using end-to-end simulations, we predict the performance that will be reached on sky by the METIS HCI modes in presence of various environmental and instrumental disturbances, including non-common path aberrations and water vapor seeing, and discuss our strategy to mitigate these various effects. We finally illustrate with mock observations and data processing that METIS should be capable of directly imaging temperate rocky planets around the nearest stars.

astro-ph.IM↗

arXiv2024

L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans

NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.

astro-ph.IM↗

arXiv2024

Pushing high angular resolution and high contrast observations on the VLTI from Y to L band with the Asgard instrumental suite: integration status and plans

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

astro-ph.IM↗

arXiv2024

Heimdallr and Solarstein: alignment, calibration, and correction in the Asgard suite at the VLTI

The Asgard instrument suite proposed for the ESO's Very Large Telescope Interferometer (VLTI) brings with it a new generation of instruments for spectroscopy and nulling. Asgard will enable investigations such as measurement of direct stellar masses for Galactic archaeology and direct detection of giant exoplanets to probe formation models using the first nulling interferometer in the southern hemisphere. We present the design and implementation of the Astralis-built Heimdallr, the beam combiner for fringe tracking and stellar interferometry in K band, as well as Solarstein, a novel implementation of a 4-beam telescope simulator for alignment and calibration. In this update, we verify that the Heimdallr design is sufficient to perform diffraction-limited beam combination. Furthermore, we demonstrate that Solarstein presents an interface comparable to the VLTI with co-phased, equal intensity beams, enabling alignment and calibration for all Asgard instruments. In doing so, we share techniques for aligning and implementing large instruments in bulk optics.

astro-ph.IM↗

arXiv2024

Heimdallr, Baldr and Solarstein: designing the next generation of VLTI instruments in the Asgard suite

High angular resolution imaging is an increasingly important capability in contemporary astrophysics. Of particular relevance to emerging fields such as the characterisation of exoplanetary systems, imaging at the required spatial scales and contrast levels results in forbidding challenges in the correction of atmospheric phase errors, which in turn drives demanding requirements for precise wavefront sensing. Asgard is the next-generation instrument suite at the European Southern Observatory's Very Large Telescope Interferometer (VLTI), targeting advances in sensitivity, spectral resolution and nulling interferometry. In this paper, we describe the requirements and designs of three core modules: Heimdallr, a beam combiner for fringe tracking, low order wavefront correction and visibility science; Baldr, a Zernike wavefront sensor to correct high order atmospheric aberrations; and Solarstein, an alignment and calibration unit. In addition, we draw generalisable insights for designing such system and discuss integration plans.

astro-ph.IM↗

arXiv2023

The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI

The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.

astro-ph.IM↗

arXiv2023

High-angular resolution and high-contrast VLTI observations from Y to L band with the Asgard instrumental suite

The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: an instrumental suite comprised of four natively collaborating instruments: BIFROST, a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; NOTT, a nulling interferometer dedicated to imaging young nearby planetary systems in the L band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimiser. These instruments share common goals and technologies. The goals are diverse astrophysical cases such as the study of the formation and evolution processes of binary systems, exoplanetary systems and protoplanetary disks, the characterization of orbital parameters and spin-orbit alignment of multiple systems, the characterization of the exoplanets, and the study of exozodiacal disks. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from the J to M bands to meet these goals. The interoperability of the Asgard instruments and their integration in the VLTI are major challenges for this project.

astro-ph.IM↗

arXiv2022

Asgard/NOTT: L-band nulling interferometry at the VLTI I. Simulating the expected high-contrast performance

Context: NOTT (formerly Hi-5) is a new high-contrast L' band (3.5-4.0 \textmu m) beam combiner for the VLTI with the ambitious goal to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and by the contributions of instrumental noises. This motivates the development of end-to-end simulations to optimize these instruments. Aims: To enable the performance evaluation and inform the design of such instruments on the current and future infrastructures, taking into account the different sources of noise, and their correlation. Methods: SCIFYsim is an end-to-end simulator for single mode filtered beam combiners, with an emphasis on nulling interferometers. It is used to compute a covariance matrix of the errors. Statistical detection tests based on likelihood ratios are then used to compute compound detection limits for the instrument. Results: With the current assumptions on the performance of the wavefront correction systems, the errors are dominated by correlated instrumental errors down to stars of magnitude 6-7 in the L band, beyond which thermal background from the telescopes and relay system becomes dominant. Conclusions: SCIFYsim is suited to anticipate some of the challenges of design, tuning, operation and signal processing for integrated optics beam combiners. The detection limits found for this early version of NOTT simulation with the unit telescopes are compatible with detections at contrasts up to $10^5$ in the L band at separations of 5 to 80 mas around bright stars.

astro-ph.IM↗

arXiv2022

Towards a Better Understanding of OPD Limitations for Higher Sensitivity and Contrast at the VLTI

Precise control of the optical path differences (OPD) in the Very Large Telescope Interferometer (VLTI) was critical for the characterization of the black hole at the center of our Galaxy - leading to the 2020 Nobel prize in physics. There is now significant effort to push these OPD limits even further, in-particular achieving 100nm OPD RMS on the 8m unit telescopes (UT's) to allow higher contrast and sensitivity at the VLTI. This work calculated the theoretical atmospheric OPD limit of the VLTI as 5nm and 15nm RMS, with current levels around 200nm and 100nm RMS for the UT and 1.8m auxillary telescopes (AT's) respectively, when using bright targets in good atmospheric conditions. We find experimental evidence for the $f^{-17/3}$ power law theoretically predicted from the effect of telescope filtering in the case of the ATs which is not currently observed for the UT's. Fitting a series of vibrating mirrors modelled as dampened harmonic oscillators, we were able to model the UT OPD PSD of the gravity fringe tracker to $<1nm/\sqrt{Hz}$ RMSE up to 100Hz, which could adequately explain a hidden $f^{-17/3}$ power law on the UTs. Vibration frequencies in the range of 60-90Hz and also 40-50Hz were found to generally dominate the closed loop OPD residuals of Gravity. Cross correlating accelerometer with Gravity data, it was found that strong contributions in the 40-50Hz range are coming from the M1-M3 mirrors, while a significant portion of power from the 60-100Hz contributions are likely coming from between the M4-M10. From the vibrating mirror model it was shown that achieving sub 100nm OPD RMS for particular baselines (that have OPD$\sim$200nm RMS) required removing nearly all vibration sources below 100Hz.

astro-ph.IM↗

arXiv2022

L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans

Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.

astro-ph.IM↗

arXiv2020

Turbulence nowcast for the Cerro Paranal and Cerro Armazones observatory sites

Optical turbulence affects significantly the quality of ground-based astronomical observations. An accurate and reliable forecast of optical turbulence can help to optimise the scheduling of the science observations and to improve both the quality of the data and the scientific productivity of the observatory. However, forecasts of the turbulence to a level of accuracy that is useful in the operations of large observatories are notoriously difficult to obtain. Several routes have been investigated, from detailed physical modelling of the atmosphere to empirical data-driven approaches. Here, we present an empirical approach exploiting spatial diversity and based on simultaneous measurements between two nearby sites, Cerro Paranal, host of the Very Large Telescope (VLT), and Cerro Armazones, future host of the Extremely Large Telescope (ELT) in Chile. We study the correlation between the high-altitude turbulence as measured between those two sites. This is part of the on-going efforts initiated by the European Southern Observatory (ESO), to obtain short-term forecasts of the turbulence to facilitate the operations of the VLT and prepare the ELT mode of operations.

astro-ph.IM↗