Searcharxiv⌕ Search
Home/Archive/arXiv

arXiv · 2209.08328

Towards a Better Understanding of OPD Limitations for Higher Sensitivity and Contrast at the VLTI

Benjamin Courtney-Barrer·Julien Woillez·Romain Laugier·Azzurra Bigioli·Nicolas Schuhler·Patricia Guajardo·Vicente Lizana·Natalię Behara·Frank Eisenhauer·Michael Ireland·Xavier Haubois·Denis Defrère
View original source ↗Read source document ↗Export metadata ↓

Abstract

Precise control of the optical path differences (OPD) in the Very Large Telescope Interferometer (VLTI) was critical for the characterization of the black hole at the center of our Galaxy - leading to the 2020 Nobel prize in physics. There is now significant effort to push these OPD limits even further, in-particular achieving 100nm OPD RMS on the 8m unit telescopes (UT's) to allow higher contrast and sensitivity at the VLTI. This work calculated the theoretical atmospheric OPD limit of the VLTI as 5nm and 15nm RMS, with current levels around 200nm and 100nm RMS for the UT and 1.8m auxillary telescopes (AT's) respectively, when using bright targets in good atmospheric conditions. We find experimental evidence for the $f^{-17/3}$ power law theoretically predicted from the effect of telescope filtering in the case of the ATs which is not currently observed for the UT's. Fitting a series of vibrating mirrors modelled as dampened harmonic oscillators, we were able to model the UT OPD PSD of the gravity fringe tracker to $<1nm/\sqrt{Hz}$ RMSE up to 100Hz, which could adequately explain a hidden $f^{-17/3}$ power law on the UTs. Vibration frequencies in the range of 60-90Hz and also 40-50Hz were found to generally dominate the closed loop OPD residuals of Gravity. Cross correlating accelerometer with Gravity data, it was found that strong contributions in the 40-50Hz range are coming from the M1-M3 mirrors, while a significant portion of power from the 60-100Hz contributions are likely coming from between the M4-M10. From the vibrating mirror model it was shown that achieving sub 100nm OPD RMS for particular baselines (that have OPD$\sim$200nm RMS) required removing nearly all vibration sources below 100Hz.

Explore related subjects

astro-ph.IM

Keep this discovery

BibTeXRIS

Benjamin Courtney-Barrer, Julien Woillez, Romain Laugier, Azzurra Bigioli, Nicolas Schuhler, Patricia Guajardo, Vicente Lizana, Natalię Behara, Frank Eisenhauer, Michael Ireland, Xavier Haubois, Denis Defrère. 2022-09-17. Towards a Better Understanding of OPD Limitations for Higher Sensitivity and Contrast at the VLTI. https://doi.org/10.1117/12.2628835

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

The EDD Radio Astronomy Backend Framework

Modern digital radio astronomy receivers produce increasingly wide-bandwidth, high bit-rate data streams that necessitate the development of flexible, scalable, and maintainable backend processing and recording systems. Historically, such backend instrumentation has been tightly coupled to telescope observing modes, limiting reuse between observatories and science cases. We present the Effelsberg Direct Digitisation (EDD) backend framework, a software-defined architecture for constructing real-time radio astronomy backends on commodity off-the-shelf computing infrastructure. We describe its design, implementation, supported observing modes, and operational deployments. EDD separates a common core framework from plugin-provided observing capabilities. The core provides orchestration, telescope interfaces, pipeline lifecycle management, monitoring, and deployment tooling, while plugins implement processing pipelines for specific observing modes. The framework is designed to support both single-dish and interferometric instruments through site-specific configuration and plugin selection. EDD currently supports spectroscopy and spectropolarimetry, pulsar timing and searching, baseband recording, very long baseline interferometry, correlation, and beamforming. Operational deployments include the Effelsberg 100-m telescope, the SKA-MPI prototype dish, the Thai National Radio Telescope, and the ARGOS interferometric prototype array. By separating common services, observing-mode plugins, and site-specific configuration, it allows backend capabilities to be deployed across heterogeneous telescope environments and provides a community resource for broadband radio astronomy instrumentation.

astro-ph.IM↗
arXiv2026

Bayesian Superiority in On/Off analysis

We present a detailed comparison of Bayesian criteria with three non-informative priors - flat, Jeffreys, and scale-invariant - for testing a signal against an unknown background and compare them with the classical frequentist Li-Ma approach in the On/Off problem. We perform Monte Carlo simulations for various background levels and evaluate the Li-Ma and Bayesian criteria by their Type I error rates. We then simulate a nonzero signal and compare the criteria in terms of Type II error rates. We find that the Bayesian criterion with the Jeffreys prior yields lower Type I and Type II error rates than the Li-Ma criterion. In addition, we show that the Bayesian criteria are more robust than the Li-Ma criterion when the background distribution is overdispersed relative to the Poisson distribution.

astro-ph.IM↗
arXiv2026

An RFSoC-based Backend and Timing System for the Balloon-borne Very Long Baseline Interferometry Experiment

We present the design and performance characterization of the digital backend and precision-timing system for the Balloon-borne Very Long Baseline Interferometry Experiment (BVEX), a pathfinder for high-frequency stratospheric VLBI at 22 GHz. The backend uses one of the four 14-bit analog-to-digital converter inputs on an AMD-Xilinx RFSoC 4x2. Although the converters support sampling rates up to 5 GSPS, the flight configuration digitizes the 2-4 GHz intermediate frequency at 4.096 GSPS. CASPER firmware provides both a high-resolution spectrometer for pointing and receiver verification, and a VLBI acquisition chain with two-bit requantization that records at a rate of about 8.2 Gbps. The timestamped data packets are sent over 100 Gigabit Ethernet (GbE) to a 16 TB NVMe array in a storage computer that draws approximately 70-80 W. The timing chain uses a Rakon oven-controlled crystal oscillator as a timing reference while a time-interval counter measures its drift relative to a GPS reference with approximately 60 ps resolution. This is the first deployment of an RFSoC-based VLBI backend and precision-timing system on a stratospheric balloon. Ground tests validated the backend, spectrometer, and timing chain. The August 2025 CSA STRATOS flight ended before reaching the target float altitude because of a balloon failure, and as a result no science observations were obtained. For the planned 2027 reflight, we are developing a conduction-cooled data storage computer with 24 TB of NVMe capacity and a direct data path from the 100 GbE interface to the NVMe array.

astro-ph.IM↗