SearcharxivSearch

arXiv subjects

Bernard Dussardier

Publications and source records attributed to Bernard Dussardier.

At least 19 recordsLinked to original sources

Gain As Configurable Disorder-Adaptive Pumping for Control of Multimode Fiber Amplifiers and Lasers

Media featuring both optical gain and disorder, such as random lasers, represent formidable challenges as subjects of research due to the high complexity of the light propagation within them; however, dramatic advances in this nascent field have been furnished by the paradigm of applying wavefront shaping techniques to the beam pumping the system. We present here a theoretical and experimental study employing this approach in a gain medium where the disorder arises not from random scattering but rather from the multimodality of a waveguide: an amplifying multimode fiber. The shaping of the core-guided pump prior to its injection affects the complex, speckle-like patterns of excitation within the fiber volume. Thus we are offered the intriguing prospect of manipulating the spatially heterogeneous gain in a system where the disorder, albeit highly complex, may be fully understood in terms of the discrete eigenmodes of a well-known waveguide. We study our medium in two different configurations: as an optical amplifier, and as a fiber laser. In the first configuration we show that dependence upon the pump configuration, of the amplifier transmission function, surprisingly survives several physical mechanisms which at first sight would appear to severely limit it. This insight is then carried on to the lasing cavity configuration, where we find striking parallels between the behavior of the system and that of random lasers; more importantly, the pump shaping shows a strong ability to control the complex emission, in particular - to selectively favor individual spectral lines and stabilize single-mode operation.

physics.optics

Steady photo-darkening of thulium alumino-silicate fibers pumped at $1.07~μm$: Quantitative effect of lanthanum, cerium and thulium

By pumping thulium-doped silica-based fibers at 1.07~μm, rapid generation of absorbing centers leads to photo-induced attenuation (PIA). This detrimental effect prevents exploiting laser emissions in the visible and near infrared. We report on the characterization of the PIA versus the fiber core composition, particularly the concentration of thulium (Tm), lanthanum (La) and cerium (Ce) ions. We show that UV emision induced by Tm-Tm energy transfers is the source of photo-darkening, and that lanthanum and cerium are efficient hardeners against PIA.

physics.optics

Formation and applications of nanoparticles in silica optical fibers

Optical fibers are the basis for applications that have grown considerably in recent years (telecommunications, sensors, fiber lasers, etc). Despite undeniable successes, it is necessary to develop new generations of amplifying optical fibers that will overcome some limitations typical of silica glass. In this sense, the amplifying Transparent Glass Ceramics (TGC), and particularly the fibers based on this technology, open new perspectives that combine the mechanical and chemical properties of a glass host with the augmented spectroscopic properties of embedded nanoparticles. This paper is an opportunity to make a state of the art on silica-based optical fibers containing nanoparticles of various types, particularly rare-earth-doped oxide nanoparticles, and on the methods for making such fibers. In the first section of this article, we will review basics on standard optical fibers and on nanoparticle-doped fibers. In the second section we will recall some fabrication methods used for standard optical fibers, and in the third section we will describe how TGC fibers can be obtained. This new generation of fibers, initiated a decade ago, already show very positive outlook and results departing from those obtained previously in homogeneous silica fibers. The next few years should see the emergence of new components based on these optical fibers.

cond-mat.mtrl-sci

Chromium-doped silica optical fibres : influence of the core composition on the Cr oxidation states and crystal field

We have made chromium-doped, silica-based preforms and optical fibres by Modified Chemical Vapour Deposition and have studied the influence of the chemical composition of the doped region on the Cr-oxidation states and the spectroscopic properties of the samples. Chromium, introduced initially as Cr3+, is partially or totally oxidized during the fabrication process, and is stabilized in the core of the preforms and fibres as Cr3+ in octahedral coordination, and/or as Cr4+ in distorded tetrahedral coordination (Cs). Small concentrations (~1-2 mol%) of codopants in silica, such as germanium or aluminium, suffice to promote a particular oxidation state. Particularly, 1 mol % of aluminium stabilizes all present chromium into Cr4+. The ligand field parameters, Dq, B and Dq/B, for Cr3+ and Cr4+ are derived. It is shown that the chromium ions in our samples are in low to intermediate ligand field and that Dq and Dq/B decrease when the aluminium content increases. The absorption cross sections of Cr3+ are similar to that reported in glasses and crystals, whereas Cr4+ has lower values than reference laser materials.

physics.optics

Erbium-doped nanoparticles in silica-based optical fibres

Developing of new rare-earth (RE)-doped optical fibres for power amplifiers and lasers requires continuous improvements in the fibre spectroscopic properties (like shape and width of the gain curve, optical quantum efficiency, resistance to spectral hole burning and photodarkening...). Silica glass as a host material for fibres has proved to be very attractive. However, some potential applications of RE-doped fibres suffer from limitations in terms of spectroscopic properties resulting from clustering or inappropriate local environment when doped into silica. To this aim, we present a new route to modify some spectroscopic properties of RE ions in silica-based fibres based on the incorporation of erbium ions in amorphous dielectric nanoparticles, grown in-situ in fibre preforms. By adding alkaline earth elements, in low concentration into silica, one can obtain a glass with an immiscibility gap. Then, phase separation occurs under an appropriate heat treatment. We investigated the role of three alkaline-earth elements: magnesium, calcium and strontium. We present the achieved stabilisation of nanometric erbium-doped dielectric nanoparticles within the core of silica fibres. We present the nanoparticle dimensional characterisation in fibre samples. We also show the spectroscopic characterisation of erbium in preform and fibre samples with different compositions. This new route could have important potentials in improving RE-doped fibre amplifiers and laser sources.

physics.optics

Coherent combining in an Yb doped double core fiber laser

Coherent combining is demonstrated in a clad pumped Yb doped double core fiber laser. A slope efficiency of more than 70 % is achieved with 96 % of the total output power on the fundamental mode of one of the two cores. This high combining efficiency is obtained when both cores are coupled via a biconical fused taper in a Michelson interferometer configuration.

physics.optics

Passively Q-switched Ytterbium and Chromium all-fibre laser

A chromium-doped saturable absorber fibre stabilizes an otherwise spontaneously chaotic ytterbium- doped fibre laser. This original passively Q-switched all-fibre laser produces sustained and stable trains of smooth pulses at high repetition rate.

physics.optics

Thulium-doped silica fibers with enhanced 3H4 level lifetime: modelling the devices for 800-820 nm band

Silica-based thulium-doped fiber devices operating around 810 nm would extend the spectral range covered by high- power fiber devices. Using a comprehensive numerical model of the fiber we have shown that efficient lasing at 810 nm can be achieved for specific ranges of the laser cavity parameters in silica-based thulium-doped fibers with enhanced 3H4 lifetime up to 58 \mus as measured in our highly alumina-codoped fibers. We present optimization of the thulium-doped fiber and laser cavity parameters and also potential applications of the developed host material in amplifiers and broadband sources.

physics.optics

Preparation and characterization of highly thulium- and alumina-doped optical fibers for single-frequency fiber lasers

Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping concentration of thulium ions should be achieved to allow for high absorption of light at a pump wavelength while the thulium ions clustering should be avoided to prevent the cooperative upconversion and quenching processes. The fabricated fibers featured pump absorption up to 70dB/m at a pump wavelength of 1611nm. The single-frequency master oscillator with a resonator composed of a pair of fiber Bragg gratings and a thulium-doped fiber was demonstrated with predominantly single ended operation. We achieved a slope efficiency of 22% and a threshold of 22mW at a lasing wavelength of 1944nm.

physics.optics

Tailoring of the luminescent ions local environment in optical fibers, and applications

The chapter is situated in the fields of fiber materials sciences and technologies (particularly dealing with the fiber glass compositions and luminescent ion doping, and transparent glass ceramic optical fibers), and applications such as fiber lasers and amplifiers. We propose to present a review of research activities on rare-earth (RE) and transition metals (TM) doped silica-based optical fibers, aiming at understanding theier spectral properties, and particularly some of their optical transitions that will allow interesting and alternative applications. Silica, as opposed to alternative, low temperature materials, is chosen for practical and economical reasons. Selected RE and TM ions are studied both as probes of their local environment and for their application potentials. In this chapter, we will focus on erbium (Er) ions for the potential spectral 'tailoring' of its gain curve at 1.55 $μ$m, thulium (Tm) as local environment probe along both near infrared transitions around 0.8 and 1.47 $μ$m, and chromium (Cr) for the sensitivity of valency and spectroscopy to the glass composition and its potential as saturable absorber in lasers. We will present some extensive studies on the influence of the local environment on dopants: such as (but not limited to) energy transfer mechanisms between rare-earth ions of same nature (Tm-Tm) or different nature (Yb-Tm), effect of the local phonon energy on Tm ions emission efficiency, broadening of Er ions emission induced by oxide nanoparticles grown in situ during the fabrication process, etc. Knowledge of these effects is essential for photonics applications, and many studies are under progress or are still needed in this field. The potential of some applications which could benefit from the basic studies on materials are also numerically studied : 0.8-$μ$m thulium-doped fiber laser, so-called S-band (1.47 $μ$m) thulium-doped amplifier for telecommunications and laser applications, sensitisation of Tm-based devices using ytterbium sensitized ions.

physics.optics

Evidence of thermal effects in high power Er3+-Yb3+ fiber laser

We analyse the influence of heat generation by non radiative transitions in high power 1.55$μ$m double cladding Erbium-Ytterbium fiber laser. At strong pumping rates, 1$μ$m lasing can start due to parasitic reflections. We present a model including heat generation and its effect on the Stark level population using the MacCumber relation. Heat generation plays then a significant role and improves the 1.5$μ$m laser efficiency by increasing the 1$μ$m threshold.

physics.optics

Investigation of the photosensitivity, temperature sustainability and fluorescence characteristics of several Er-doped photosensitive fibers

Three different types of Er doped photosensitive fibers, germanium/erbium (Ge/Er) fiber, tin/germanium/erbium fiber (Sn/Er) and antimony/germanium/erbium fiber (Sb/Er) have been manufactured and studied for use in optical sensor systems. Their characteristics of photosensitivity, the temperature sustainability of fiber Bragg gratings (FBGs) written into these fibers and the fluorescence emission from the Er dopant were investigated and compared. It has been shown in this work that these fibers all show a satisfactory degree of photosensitivity to enable the fabrication of FBGs and a significant level of fluorescence emission within the 1550 nm band for sensor use. The high temperature sustainability of the FBGs written into these fibers was investigated and seen to be quite significant at temperatures as high as 850 ^{\circ}C, in particular for the Sn/Er and Sb/Er fibers. A fiber laser using the Sb/Er fiber as the gain medium was demonstrated, giving evidence of the strong fluorescence emission from the Er dopant. These fibers are all suitable for use in a variety of sensing applications for the simultaneous measurement of temperature and strain by means of monitoring both the fluorescence characteristics and the peak wavelength shift of the FBGs formed in fiber laser sensor application.

physics.optics

Preparation and Properties of Er-Doped ZrO2 Nanocrystalline Phase-Separated Preforms of Optical Fibers by MCVD Process

The fabrication of Er-doped ZrO2-based nanocrystalline phase-separated silica optical preforms by the MCVD and solution doping techniques is presented. Fabricated preform cores are nearly transparent and contain phase-separated rare-earth doped nanocrystalline particles with diameters mainly in a range from 20 to 80 nm. High concentrations of erbium and aluminium in preform cores of about 0.3 and 14 mol%, respectively have been achieved without defects on the core-cladding interface. Spectral losses in a range 800-1600 nm and fluorescence spectra of erbium ions around 1550 nm measured on a fibre drawn from the preform are reported.

cond-mat.mtrl-sci

Fabrication of Rare Earth-Doped Transparent Glass Ceramic Optical Fibers by Modified Chemical Vapor Deposition

Rare earth (RE) doped silica-based optical fibers with transparent glass ceramic (TGC) core was fabricated through the well-known modified chemical vapor deposition (MCVD) process without going through the commonly used stage of post-ceramming. The main characteristics of the RE-doped oxyde nanoparticles namely, their density and mean diameter in the fibers are dictated by the concentration of alkaline earth element used as phase separating agent. Magnesium and erbium co-doped fibers were fabricated. Optical transmission in term of loss due to scattering as well as some spectroscopic characteristics of the erbium ions was studied. For low Mg content, nano-scale particles could be grown with and relatively low scattering losses were obtained, whereas large Mg-content causes the growth of larger particles resulting in much higher loss. However in the latter case, certain interesting alteration of the spectroscopic properties of the erbium ions were observed. These initial studies should be useful in incorporating new doped materials in order to realize active optical fibers for constructing lasers and amplifiers.

physics.optics

Spectroscopic signature of phosphate crystallization in Erbium-doped optical fibre preforms

In rare-earth-doped silica optical fibres, the homogeneous distribution of amplifying ions and part of their spectroscopic properties are usually improved by adding selected elements, such as phosphorus or aluminum, as structural modifier. In erbium ion (Er3+) doped fibres, phosphorus preferentially coordinates to Er3+ ions to form regular cages around it. However, the crystalline structures described in literature never gave particular spectroscopic signature. In this article, we report emission and excitation spectra of Er3+ in a transparent phosphorus-doped silica fibre preform. The observed line features observed at room and low temperature are attributed to ErPO4 crystallites.

physics.optics

Large-mode-area leaky optical fibre fabricated by MCVD

A large mode area single-mode optical fibre based on leaky mode filtering was prepared by MCVD. The cladding structure discriminates the fundamental mode from the higher order ones. A preliminary version has 25-$μ$m core diameter and 0.11 numerical aperture. A Gaussian-like mode with 22-$μ$m MFD is observed after 3-m propagation, in agreement with modeling.

physics.optics