arXiv subjects

Bin Ran

Publications and source records attributed to Bin Ran.

At least 19 recordsLinked to original sources

arXiv2026

Forecasting the Emergence and Evolution of Crash Hotspots: A Unified Deep Learning Framework for Proactive Traffic Safety

Road crashes remain among the gravest threats to public safety, and preventing them is a defining task of transportation systems worldwide. Much of that harm concentrates at hotspots, yet a hotspot is less a place than an episode; it emerges quietly at an intersection or along an arterial, intensifies for weeks, then subsides, only to reappear elsewhere. Enforcement guided by maps of past crashes inevitably trails this cycle, patrolling yesterday's hotspots while tomorrow's form unwatched. Breaking that lag requires three capabilities at once: detecting hotspots as they are born, forecasting where they will sit next week, and following each one through its life. We introduce HERALD (Hotspot Emergence, Risk Anticipation, and Life-cycle Dynamics), a unified deep learning framework that provides all three from a single statewide model. HERALD distills each county's recent crash history into weekly risk maps and forecasts the next with a CNN--Transformer, whose mixture-of-experts lets one model serve dense urban cores and sparse rural corridors alike. Each forecast is anchored in the county's long-run crash geography, sharpened by the self-exciting effect of recent crashes, and paired with explicit warnings of where new hotspots are about to appear. Followed over time, every hotspot acquires a legible life story, from birth through growth and stability to decline and death. Across six heterogeneous Wisconsin counties, HERALD forecasts more accurately than five identically trained baselines, locates hotspots most precisely, and flags emerging risks before they take hold. A single adjustable setting trades accuracy for extra sensitivity where deployment demands it. The result shifts hotspot management from mapping the past to anticipating the future.

cs.LG↗

arXiv2026

Geometry-Aware Infrastructure-Anchored Denoiser for UWB Sensing and Work-Zone Reconstruction

Accurate work-zone geometry perception is critical for intelligent transportation systems, and ultra-wideband sensing offers a low-cost approach for infrastructure-aided reconstruction. However, outdoor UWB ranging is often degraded by non-line-of-sight propagation, burst noise, and long-tail errors, which can distort downstream spatial reconstruction. We present GAIA, a geometry-aware, infrastructure-anchored learning framework that couples temporal range modeling with latent anchor-layout estimation and deterministic distance projection. GAIA preserves range denoising as the supervised task while orienting the learned distances toward boundary-consistent reconstruction. We evaluate GAIA on a real-world outdoor UWB dataset with synchronized UWB, GNSS, and IMU measurements, and further test robustness using a real-data-calibrated stress-test simulator. GAIA achieves the lowest overall range MSE and highest polygon IoU among evaluated filtering-based and learning-based baselines, reducing MSE by 18.4% and improving polygon IoU by 15.5% over PoseMLP. These results show that geometry-aware range denoising provides an effective path toward spatially coherent work-zone reconstruction.

cs.LG↗

arXiv2026

V2I Work Zone Geometry Reconstruction with Pose-Conditioned UWB Range Denoising

Reliable work zone mapping is important for connected and autonomous vehicles (CAVs) to navigate safely and smoothly through work zone areas. Cone-mounted ultra-wideband (UWB) roadside units (RSU) offer a cost-effective way for work zone layout inference, as roadside anchors and vehicle tags provide direct vehicle-to-infrastructure (V2I) range constraints for work zone geometry reconstruction. However, UWB range estimation is degraded by bursty outliers, non-line-of-sight (NLOS) errors, arbitrary anchor-ordering issues, and vehicle pose uncertainties in practical field deployments. To address these challenges, this study proposes a pose-conditioned, permutation-equivariant predictive denoiser for multi-anchor UWB ranging. The model employs shared anchor-wise temporal prediction to capture range dynamics, symmetric set aggregation to handle unordered and missing anchors, and pose-conditioned residual decoding to incorporate vehicle motion as a geometric prior. A two-stage training strategy first learns prediction from observed ranges, and then fine-tunes the denoiser with NLOS-weighted supervision. The method is evaluated on rare real-world V2I UWB field data collected with a CAV, as well as on controlled large-scale simulation benchmarks for ablative insights. Results show that the proposed method substantially improves range accuracy, cone localization, and work zone geometry reconstruction in challenging NLOS-dominated regimes, remains robust to anchor re-indexing and moderate anchor dropout, and reduces measurement-weighted field MSE by 66.9% relative to the raw input.

cs.RO↗

arXiv2026

Behavior-Grounded Lane Representation Learning for Multi-Task Traffic Digital Twins

Traffic digital twins are powerful tools for advanced traffic management, and most systems are built on static geometric representations. However, these representations fail to capture the dynamic functional semantics required for behavior-aware reasoning, such as how a lane operates under complex traffic conditions. To address this gap, we introduce GeoLaneRep, a behavior-grounded lane representation learning framework for traffic digital twins. GeoLaneRep jointly encodes static lane geometry, observed vehicle trajectories, and operational descriptors into a shared, cross-camera semantic embedding. The encoder is trained with a joint objective combining contrastive cross-camera alignment, auxiliary role supervision, and temporal anomaly detection. Across 16 roadside cameras and 132 lanes, the learned embeddings achieve a $0.004$ lateral-rank error and an edge-role F1 of $1.000$ in zero-shot cross-camera matching, and an AUROC of $0.991$ for window-level anomaly detection. We further show that the same behavioral embeddings can condition a diffusion-based generator to synthesize lane geometries that satisfy targeted operational specifications, with $87.9\%$ overall specification accuracy across 38 lane groups. GeoLaneRep thus provides a semantic interface between roadside observations and downstream digital twin tasks, supporting cross-camera transfer, behavior-aware monitoring, and goal-directed lane synthesis. The framework is openly available at https://github.com/raynbowy23/GeoLaneRep.

cs.CV↗

arXiv2026

An Agentic Workflow for Detecting Personally Identifiable Information in Crash Narratives

Crash narratives in crash reports provide crucial contextual information for traffic safety analysis. Yet, their broader use is hindered by the presence of personally identifiable information (PII), including names, home addresses, and license plate numbers. Because PII appears sparsely and inconsistently in crash narratives, manual detection is not scalable, and existing rule-based approaches often fail to capture context-dependent PII. This study develops and evaluates a locally deployable, agentic workflow for PII detection in crash narratives by leveraging large language models (LLMs). The workflow contains a Hybrid Extractor and a Verifier. The Hybrid Extractor routes structured PII (e.g., phone numbers and email addresses) to a rule-based model (i.e., Presidio) and context-dependent PII (e.g., names, home addresses, and alphanumeric identifiers) to a domain-adapted, fine-tuned LLM. To address ambiguity in challenging categories, the workflow incorporates ensemble LLM extraction and an agentic verification step that filters false detections through evidence-based reasoning. Evaluated on a real-world crash dataset, the agentic workflow achieves strong performance with a precision of 0.82, a recall of 0.94, an F1 of 0.87, and an accuracy of 0.96, outperforming multiple baseline methods. Moreover, the ablation results suggest that ensemble LLM extraction and Verifier offer improved detection for home addresses and alphanumeric identifiers. The workflow runs locally, supporting privacy-sensitive operational settings where external APIs are restricted. This work offers a practical and robust path for scalable, privacy-preserving crash data processing, enabling broader research and safety interventions while safeguarding individual privacy.

cs.CR↗

arXiv2026

CrashSight: A Phase-Aware, Infrastructure-Centric Video Benchmark for Traffic Crash Scene Understanding and Reasoning

Cooperative autonomous driving requires traffic scene understanding from both vehicle and infrastructure perspectives. While vision-language models (VLMs) show strong general reasoning capabilities, their performance in safety-critical traffic scenarios remains insufficiently evaluated due to the ego-vehicle focus of existing benchmarks. To bridge this gap, we present \textbf{CrashSight}, a large-scale vision-language benchmark for roadway crash understanding using real-world roadside camera data. The dataset comprises 250 crash videos, annotated with 13K multiple-choice question-answer pairs organized under a two-tier taxonomy. Tier 1 evaluates the visual grounding of scene context and involved parties, while Tier 2 probes higher-level reasoning, including crash mechanics, causal attribution, temporal progression, and post-crash outcomes. We benchmark 8 state-of-the-art VLMs and show that, despite strong scene description capabilities, current models struggle with temporal and causal reasoning in safety-critical scenarios. We provide a detailed analysis of failure scenarios and discuss directions for improving VLM crash understanding. The benchmark provides a standardized evaluation framework for infrastructure-assisted perception in cooperative autonomous driving. The CrashSight benchmark, including the full dataset and code, is accessible at https://mcgrche.github.io/crashsight.

cs.CV↗

arXiv2026

V2X-QA: A Comprehensive Reasoning Dataset and Benchmark for Multimodal Large Language Models in Autonomous Driving Across Ego, Infrastructure, and Cooperative Views

Multimodal large language models (MLLMs) have shown strong potential for autonomous driving, yet existing benchmarks remain largely ego-centric and therefore cannot systematically assess model performance in infrastructure-centric and cooperative driving conditions. In this work, we introduce V2X-QA, a real-world dataset and benchmark for evaluating MLLMs across vehicle-side, infrastructure-side, and cooperative viewpoints. V2X-QA is built around a view-decoupled evaluation protocol that enables controlled comparison under vehicle-only, infrastructure-only, and cooperative driving conditions within a unified multiple-choice question answering (MCQA) framework. The benchmark is organized into a twelve-task taxonomy spanning perception, prediction, and reasoning and planning, and is constructed through expert-verified MCQA annotation to enable fine-grained diagnosis of viewpoint-dependent capabilities. Benchmark results across ten representative state-of-the-art proprietary and open-source models show that viewpoint accessibility substantially affects performance, and infrastructure-side reasoning supports meaningful macroscopic traffic understanding. Results also indicate that cooperative reasoning remains challenging since it requires cross-view alignment and evidence integration rather than simply additional visual input. To address these challenges, we introduce V2X-MoE, a benchmark-aligned baseline with explicit view routing and viewpoint-specific LoRA experts. The strong performance of V2X-MoE further suggests that explicit viewpoint specialization is a promising direction for multi-view reasoning in autonomous driving. Overall, V2X-QA provides a foundation for studying multi-perspective reasoning, reliability, and cooperative physical intelligence in connected autonomous driving. The dataset and V2X-MoE resources are publicly available at: https://github.com/junwei0001/V2X-QA.

cs.RO↗

arXiv2026

CrossTraffic: An Open-Source Framework for Reproducible and Executable Transportation Analysis and Knowledge Management

Transportation engineering often relies on technical manuals and analytical tools for planning, design, and operations. However, the dissemination and management of these methodologies, such as those defined in the Highway Capacity Manual (HCM), remain fragmented. Computational procedures are often embedded within proprietary tools, updates are inconsistently propagated across platforms, and knowledge transfer is limited. These challenges hinder reproducibility, interoperability, and collaborative advancement in transportation analysis. This paper introduces CrossTraffic, an open-source framework that treats transportation methodologies and regulatory knowledge as continuously deployable and verifiable software infrastructure. CrossTraffic provides an executable computational core for transportation analysis with cross-platform access through standardized interfaces. An ontology-driven knowledge graph encodes engineering rules and provenance and serves as a semantic validation layer for analytical workflows. A conversational interface further connects large language models to this validated execution environment through structured tool invocation, enabling natural-language access while preventing procedurally invalid analyses. Experimental results show that knowledge-graph-constrained execution substantially improves numerical accuracy and methodological fidelity compared with context-only approaches, achieving near-zero numerical error (MAE<0.50) across multiple large language models and perfect detection of invalid analytical inputs in stress testing (F1~=~1.0). Its modular architecture supports the integration of additional transportation manuals and research models, providing a foundation for an open and collaborative transportation science ecosystem with a reproducible computational core. The system implementation is publicly available at https://github.com/crosstraffic.

cs.CY↗

arXiv2026

HERMES: A Holistic End-to-End Risk-Aware Multimodal Embodied System with Vision-Language Models for Long-Tail Autonomous Driving

End-to-end autonomous driving models increasingly benefit from large vision--language models for semantic understanding, yet ensuring safe and accurate operation under long-tail conditions remains challenging. These challenges are particularly prominent in long-tail mixed-traffic scenarios, where autonomous vehicles must interact with heterogeneous road users, including human-driven vehicles and vulnerable road users, under complex and uncertain conditions. This paper proposes HERMES, a holistic risk-aware end-to-end multimodal driving framework designed to inject explicit long-tail risk cues into trajectory planning. HERMES employs a foundation-model-assisted annotation pipeline to produce structured Long-Tail Scene Context and Long-Tail Planning Context, capturing hazard-centric cues together with maneuver intent and safety preference, and uses these signals to guide end-to-end planning. HERMES further introduces a Tri-Modal Driving Module that fuses multi-view perception, historical motion cues, and semantic guidance, ensuring risk-aware accurate trajectory planning under long-tail scenarios. Experiments on the real-world long-tail dataset demonstrate that HERMES consistently outperforms representative end-to-end and VLM-driven baselines under long-tail mixed-traffic scenarios. Ablation studies verify the complementary contributions of key components.

cs.RO↗

arXiv2025

SRA-CP: Spontaneous Risk-Aware Selective Cooperative Perception

Cooperative perception (CP) offers significant potential to overcome the limitations of single-vehicle sensing by enabling information sharing among connected vehicles (CVs). However, existing generic CP approaches need to transmit large volumes of perception data that are irrelevant to the driving safety, exceeding available communication bandwidth. Moreover, most CP frameworks rely on pre-defined communication partners, making them unsuitable for dynamic traffic environments. This paper proposes a Spontaneous Risk-Aware Selective Cooperative Perception (SRA-CP) framework to address these challenges. SRA-CP introduces a decentralized protocol where connected agents continuously broadcast lightweight perception coverage summaries and initiate targeted cooperation only when risk-relevant blind zones are detected. A perceptual risk identification module enables each CV to locally assess the impact of occlusions on its driving task and determine whether cooperation is necessary. When CP is triggered, the ego vehicle selects appropriate peers based on shared perception coverage and engages in selective information exchange through a fusion module that prioritizes safety-critical content and adapts to bandwidth constraints. We evaluate SRA-CP on a public dataset against several representative baselines. Results show that SRA-CP achieves less than 1% average precision (AP) loss for safety-critical objects compared to generic CP, while using only 20% of the communication bandwidth. Moreover, it improves the perception performance by 15% over existing selective CP methods that do not incorporate risk awareness.

cs.AI↗

arXiv2025

Geo-ORBIT: A Federated Digital Twin Framework for Scene-Adaptive Lane Geometry Detection

Digital Twins (DT) have the potential to transform traffic management and operations by creating dynamic, virtual representations of transportation systems that sense conditions, analyze operations, and support decision-making. A key component for DT of the transportation system is dynamic roadway geometry sensing. However, existing approaches often rely on static maps or costly sensors, limiting scalability and adaptability. Additionally, large-scale DTs that collect and analyze data from multiple sources face challenges in privacy, communication, and computational efficiency. To address these challenges, we introduce Geo-ORBIT (Geometrical Operational Roadway Blueprint with Integrated Twin), a unified framework that combines real-time lane detection, DT synchronization, and federated meta-learning. At the core of Geo-ORBIT is GeoLane, a lightweight lane detection model that learns lane geometries from vehicle trajectory data using roadside cameras. We extend this model through Meta-GeoLane, which learns to personalize detection parameters for local entities, and FedMeta-GeoLane, a federated learning strategy that ensures scalable and privacy-preserving adaptation across roadside deployments. Our system is integrated with CARLA and SUMO to create a high-fidelity DT that renders highway scenarios and captures traffic flows in real-time. Extensive experiments across diverse urban scenes show that FedMeta-GeoLane consistently outperforms baseline and meta-learning approaches, achieving lower geometric error and stronger generalization to unseen locations while drastically reducing communication overhead. This work lays the foundation for flexible, context-aware infrastructure modeling in DTs. The framework is publicly available at https://github.com/raynbowy23/FedMeta-GeoLane.git.

cs.CV↗

arXiv2025

SEAL: Vision-Language Model-Based Safe End-to-End Cooperative Autonomous Driving with Adaptive Long-Tail Modeling

Autonomous driving technologies face significant safety challenges while operating under rare, diverse, and visually degraded weather scenarios. These challenges become more critical in cooperative settings, where vehicles and infrastructure jointly perceive and reason across complex environments. To address these issues, we propose SEAL, a vision-language model-based framework with adaptive multimodal learning for robust cooperative autonomous driving under long-tail scenarios. SEAL introduces three core innovations: (i) a prompt-driven long-tail scenario generation and evaluation pipeline that leverages foundation models to synthesize realistic long-tail conditions such as snow and fog across vehicle- and infrastructure-side views, enriching training diversity efficiently; (ii) a gated multi-scenario adaptive attention module that modulates the visual stream using scenario priors to recalibrate ambiguous or corrupted features; and (iii) a multi-task scenario-aware contrastive learning objective that improves multimodal alignment and promotes cross-scenario feature separability. Extensive experiments demonstrate that SEAL significantly outperforms existing baselines in reasoning, safety, and planning accuracy under complex, challenging driving conditions, advancing the safety, robustness, and scalability of autonomous driving.

cs.RO↗

arXiv2025

Planning Safety Trajectories with Dual-Phase, Physics-Informed, and Transportation Knowledge-Driven Large Language Models

Foundation models have demonstrated strong reasoning and generalization capabilities in driving-related tasks, including scene understanding, planning, and control. However, they still face challenges in hallucinations, uncertainty, and long inference latency. While existing foundation models have general knowledge of avoiding collisions, they often lack transportation-specific safety knowledge. To overcome these limitations, we introduce LetsPi, a physics-informed, dual-phase, knowledge-driven framework for safe, human-like trajectory planning. To prevent hallucinations and minimize uncertainty, this hybrid framework integrates Large Language Model (LLM) reasoning with physics-informed social force dynamics. LetsPi leverages the LLM to analyze driving scenes and historical information, providing appropriate parameters and target destinations (goals) for the social force model, which then generates the future trajectory. Moreover, the dual-phase architecture balances reasoning and computational efficiency through its Memory Collection phase and Fast Inference phase. The Memory Collection phase leverages the physics-informed LLM to process and refine planning results through reasoning, reflection, and memory modules, storing safe, high-quality driving experiences in a memory bank. Surrogate safety measures and physics-informed prompt techniques are introduced to enhance the LLM's knowledge of transportation safety and physical force, respectively. The Fast Inference phase extracts similar driving experiences as few-shot examples for new scenarios, while simplifying input-output requirements to enable rapid trajectory planning without compromising safety. Extensive experiments using the HighD dataset demonstrate that LetsPi outperforms baseline models across five safety metrics.See PDF for project Github link.

cs.RO↗

arXiv2025

V2X-LLM: Enhancing V2X Integration and Understanding in Connected Vehicle Corridors

The advancement of Connected and Automated Vehicles (CAVs) and Vehicle-to-Everything (V2X) offers significant potential for enhancing transportation safety, mobility, and sustainability. However, the integration and analysis of the diverse and voluminous V2X data, including Basic Safety Messages (BSMs) and Signal Phase and Timing (SPaT) data, present substantial challenges, especially on Connected Vehicle Corridors. These challenges include managing large data volumes, ensuring real-time data integration, and understanding complex traffic scenarios. Although these projects have developed an advanced CAV data pipeline that enables real-time communication between vehicles, infrastructure, and other road users for managing connected vehicle and roadside unit (RSU) data, significant hurdles in data comprehension and real-time scenario analysis and reasoning persist. To address these issues, we introduce the V2X-LLM framework, a novel enhancement to the existing CV data pipeline. V2X-LLM leverages Large Language Models (LLMs) to improve the understanding and real-time analysis of V2X data. The framework includes four key tasks: Scenario Explanation, offering detailed narratives of traffic conditions; V2X Data Description, detailing vehicle and infrastructure statuses; State Prediction, forecasting future traffic states; and Navigation Advisory, providing optimized routing instructions. By integrating LLM-driven reasoning with V2X data within the data pipeline, the V2X-LLM framework offers real-time feedback and decision support for traffic management. This integration enhances the accuracy of traffic analysis, safety, and traffic optimization. Demonstrations in a real-world urban corridor highlight the framework's potential to advance intelligent transportation systems.

cs.AI↗

arXiv2024

FollowGen: A Scaled Noise Conditional Diffusion Model for Car-Following Trajectory Prediction

Vehicle trajectory prediction is crucial for advancing autonomous driving and advanced driver assistance systems (ADAS). Although deep learning-based approaches - especially those utilizing transformer-based and generative models - have markedly improved prediction accuracy by capturing complex, non-linear patterns in vehicle dynamics and traffic interactions, they frequently overlook detailed car-following behaviors and the inter-vehicle interactions critical for real-world driving applications, particularly in fully autonomous or mixed traffic scenarios. To address the issue, this study introduces a scaled noise conditional diffusion model for car-following trajectory prediction, which integrates detailed inter-vehicular interactions and car-following dynamics into a generative framework, improving both the accuracy and plausibility of predicted trajectories. The model utilizes a novel pipeline to capture historical vehicle dynamics by scaling noise with encoded historical features within the diffusion process. Particularly, it employs a cross-attention-based transformer architecture to model intricate inter-vehicle dependencies, effectively guiding the denoising process and enhancing prediction accuracy. Experimental results on diverse real-world driving scenarios demonstrate the state-of-the-art performance and robustness of the proposed method.

cs.CV↗

arXiv2024

A Digital Twin Framework for Physical-Virtual Integration in V2X-Enabled Connected Vehicle Corridors

Transportation Cyber-Physical Systems (T-CPS) enhance safety and mobility by integrating cyber and physical transportation systems. A key component of T-CPS is the Digital Twin (DT), a virtual representation that enables simulation, analysis, and optimization through real-time data exchange and communication. Although existing studies have explored DTs for vehicles, communications, pedestrians, and traffic, real-world validations and implementations of DTs that encompass infrastructure, vehicles, signals, communications, and more remain limited due to several challenges. These include accessing real-world connected infrastructure, integrating heterogeneous, multi-sourced data, ensuring real-time data processing, and synchronizing the digital and physical systems. To address these challenges, this study develops a traffic DT based on a real-world connected vehicle corridor. Leveraging the Cellular Vehicle-to-Everything (C-V2X) infrastructure in the corridor, along with communication, computing, and simulation technologies, the proposed DT accurately replicates physical vehicle behaviors, signal timing, communications, and traffic patterns within the virtual environment. Building upon the previous data pipeline, the digital system ensures robust synchronization with the physical environment. Moreover, the DT's scalable and redundant architecture enhances data integrity, making it capable of supporting future large-scale C-V2X deployments. Furthermore, its ability to provide feedback to the physical system is demonstrated through applications such as signal timing adjustments, vehicle advisory messages, and incident notifications. The proposed DT is a vital tool in T-CPS, enabling real-time traffic monitoring, prediction, and optimization to enhance the reliability and safety of transportation systems.

cs.RO↗

arXiv2024

Real-World Data Inspired Interactive Connected Traffic Scenario Generation

Simulation is a crucial step in ensuring accurate, efficient, and realistic Connected and Autonomous Vehicles (CAVs) testing and validation. As the adoption of CAV accelerates, the integration of real-world data into simulation environments becomes increasingly critical. Among various technologies utilized by CAVs, Vehicle-to-Everything (V2X) communication plays a crucial role in ensuring a seamless transmission of information between CAVs, infrastructure, and other road users. However, most existing studies have focused on developing and testing communication protocols, resource allocation strategies, and data dissemination techniques in V2X. There is a gap where real-world V2X data is integrated into simulations to generate diverse and high-fidelity traffic scenarios. To fulfill this research gap, we leverage real-world Signal Phase and Timing (SPaT) data from Roadside Units (RSUs) to enhance the fidelity of CAV simulations. Moreover, we developed an algorithm that enables Autonomous Vehicles (AVs) to respond dynamically to real-time traffic signal data, simulating realistic V2X communication scenarios. Such high-fidelity simulation environments can generate multimodal data, including trajectory, semantic camera, depth camera, and bird's eye view data for various traffic scenarios. The generated scenarios and data provide invaluable insights into AVs' interactions with traffic infrastructure and other road users. This work aims to bridge the gap between theoretical research and practical deployment of CAVs, facilitating the development of smarter and safer transportation systems.

cs.RO↗

arXiv2024

Enhancing Pedestrian Trajectory Prediction with Crowd Trip Information

Pedestrian trajectory prediction is essential for various applications in active traffic management, urban planning, traffic control, crowd management, and autonomous driving, aiming to enhance traffic safety and efficiency. Accurately predicting pedestrian trajectories requires a deep understanding of individual behaviors, social interactions, and road environments. Existing studies have developed various models to capture the influence of social interactions and road conditions on pedestrian trajectories. However, these approaches are limited by the lack of a comprehensive view of social interactions and road environments. To address these limitations and enhance the accuracy of pedestrian trajectory prediction, we propose a novel approach incorporating trip information as a new modality into pedestrian trajectory models. We propose RNTransformer, a generic model that utilizes crowd trip information to capture global information on social interactions. We incorporated RNTransformer with various socially aware local pedestrian trajectory prediction models to demonstrate its performance. Specifically, by leveraging a pre-trained RNTransformer when training different pedestrian trajectory prediction models, we observed improvements in performance metrics: a 1.3/2.2% enhancement in ADE/FDE on Social-LSTM, a 6.5/28.4% improvement on Social-STGCNN, and an 8.6/4.3% improvement on S-Implicit. Evaluation results demonstrate that RNTransformer significantly enhances the accuracy of various pedestrian trajectory prediction models across multiple datasets. Further investigation reveals that the RNTransformer effectively guides local models to more accurate directions due to the consideration of global information. By exploring crowd behavior within the road network, our approach shows great promise in improving pedestrian safety through accurate trajectory predictions.

cs.CV↗