SearcharxivSearch

arXiv subjects

Bingwei Zhang

Publications and source records attributed to Bingwei Zhang.

11 recordsLinked to original sources

A Sharp Sobolev Inequality on Compact CR Manifolds

For any \(n\geq 1\), let \((M,\theta)\) be a compact strictly pseudoconvex hypersurface type CR manifold with dimension \(2n+1\), \(Q=2n+2\) be its homogeneous dimension. We prove the sharp Folland--Stein Sobolev inequality on \(M\): if \(Q^*=2Q/(Q-2)\), then there exists a constant \(A>0\), depending only on \((M,\theta)\), such that \[ \|u\|_{L^{Q^*}(M)}^2 \le K(n)^2\|\nabla_b u\|_{L^2(M)}^2 + A\|u\|_{L^2(M)}^2, \qquad u\in S^{1,2}(M). \] Here \(K(n)\) is the sharp constant in the Folland--Stein Sobolev inequality on the Heisenberg group \(\mathbb H^n\).

math.AP

SLAI T-Rex: Full-Parameter Post-training of the DeepSeek-V4 Family on Ascend SuperPOD

Full-parameter post-training of trillion-parameter-scale MoE models introduces substantial system-level challenges for large-scale distributed training, including severe memory pressure, non-overlapped communication overhead, and inefficient kernel execution. While most large-scale LLM training systems are built around GPU-based clusters, this report presents an end-to-end optimization practice on the Ascend NPU SuperPOD. Using the DeepSeek-V4 model family as the target workload, we develop a hierarchical optimization framework spanning model-level parallelism, computation-communication orchestration, and low-level kernel execution. The resulting system achieves 34.22% Model FLOPs Utilization (MFU) with a 2.93x improvement over the open-source baseline recipe while maintaining training stability. Building on this optimized infrastructure, we further establish a CPT and SFT workflow for complex Operations Research (OR) tasks. We refer to the integrated framework as SLAI T-Rex. Using DeepSeek-V4-Flash, we develop OR-oriented CPT and SFT data pipelines that combine collected domain resources with solver-verified synthetic optimization documents. The resulting dataset contains 10K high-quality SFT samples spanning four task categories and three problem representations. The specialized model achieves the highest average zero-shot Pass@1 score among the evaluated models, reaching 71.81% and outperforming GPT-5.4-Mini and the base DeepSeek-V4-Flash model by 3.98 and 11.27 percentage points, respectively. Overall, this work demonstrates a full-stack pathway from efficient trillion-parameter model post-training on Ascend infra to domain-specialized Flash models for solver-grounded mathematical modeling, advancing frontier-model systems for complex reasoning.

cs.CL

Taylor Tube Method for Validated IVP

We recently introduced a novel architecture for the design of validated IVP algorithms. This architecture forms the basis of our complete validated algorithm for IVP. A key subroutine in our algorithm is the \textbf{Euler Tube}: it gave a technique for refining end- and full-enclosures and is also key to deriving a complexity bound of our IVP solver. In this paper, we generalize it to \textbf{Taylor Tube} of degree $p\ge 1$. As expected, higher-degree Taylor Tubes improve accuracy. But surprisingly, our experiments show that it can also lead to an overall speedup when combined with bisection.

math.NA

Bivariate range functions with superior convergence order

Range functions are a fundamental tool for certified computations in geometric modeling, computer graphics, and robotics, but traditional range functions have only quadratic convergence order ($m=2$). For ``superior'' convergence order (i.e., $m>2$), we exploit the Cornelius--Lohner framework in order to introduce new bivariate range functions based on Taylor, Lagrange, and Hermite interpolation. In particular, we focus on practical range functions with cubic and quartic convergence order. We implemented them in Julia and provide experimental validation of their performance in terms of efficiency and efficacy.

math.NA

Projection of purification performance for the RELICS experiment

The RELICS (REactor neutrino LIquid xenon Coherent elastic Scattering) experiment employs a dual-phase liquid xenon time projection chamber to search for Coherent Elastic Neutrino-Nucleus Scattering (CE$\nu$NS) induced by reactor neutrinos. To detect these sub-keV nuclear recoils and minimize signal attenuation, it is critical to maintain a sufficiently low impurity concentration in the detector. This work presents a comprehensive purity evolution model developed to describe impurity migration inside the detector. Utilizing measured material outgassing rates as input parameters, the model incorporates non-uniform transport mechanisms of the impurities, including circulation, vaporization, and condensation. The model is validated using data from a dedicated prototype detector. Based on this validated model, projections for the purification performance of the upcoming RELICS-10 and RELICS-50 detectors are provided.

physics.ins-det

End Cover for Initial Value Problem: Complete Validated Algorithms with Complexity Analysis

We consider the first-order autonomous ordinary differential equation \[ \mathbf{x}' = \mathbf{f}(\mathbf{x}), \] where $\mathbf{f} : \mathbb{R}^n \to \mathbb{R}^n$ is locally Lipschitz. For a box $B_0 \subseteq \mathbb{R}^n$ and $h > 0$, we denote by $\mathrm{IVP}_{\mathbf{f}}(B_0,h)$ the set of solutions $\mathbf{x} : [0,h] \to \mathbb{R}^n$ satisfying \[ \mathbf{x}'(t) = \mathbf{f}(\mathbf{x}(t)), \qquad \mathbf{x}(0) \in B_0 . \] We present a complete validated algorithm for the following \emph{End Cover Problem}: given $(\mathbf{f}, B_0, \varepsilon, h)$, compute a finite set $\mathcal{C}$ of boxes such that \[ \mathrm{End}_{\mathbf{f}}(B_0,h) \;\subseteq\; \bigcup_{B \in \mathcal{C}} B \;\subseteq\; \mathrm{End}_{\mathbf{f}}(B_0,h) \oplus [-\varepsilon,\varepsilon]^n , \] where \[ \mathrm{End}_{\mathbf{f}}(B_0,h) = \left\{ \mathbf{x}(h) : \mathbf{x} \in \mathrm{IVP}_{\mathbf{f}}(B_0,h) \right\}. \] Moreover, we provide a complexity analysis of our algorithm and introduce a novel technique for computing the end cover $\mathcal{C}$ based on covering the boundary of $\mathrm{End}_{\mathbf{f}}(B_0,h)$. Finally, we present experimental results demonstrating the practicality of our approach.

cs.DS

Development of a dual-phase xenon time projection chamber prototype for the RELICS experiment

The RELICS (REactor neutrino LIquid xenon Coherent elastic Scattering) experiment aims to detect coherent elastic neutrino-nucleus scattering from reactor antineutrinos using a dual-phase xenon time projection chamber. To validate the detector concept and ensure technical reliability for the full-scale experiment, a dedicated prototype was designed, constructed, and operated. This work presents an overview of the design, construction, and operational performance of the prototype, with emphasis on its major subsystems, including the TPC, cryogenic and xenon purification systems, slow control, and data acquisition. During operation, the detector demonstrated the capability to achieve a sub-keV energy threshold required for the RELICS physics program, as reflected by a measured single electron gain of 34.30~$\pm$~0.01~(stat.)~PE/e$^-$ and the successful detection of 0.27~keV L-shell decay events from $^{37}$Ar. In addition, essential data analysis techniques and simulation frameworks were developed and validated, establishing the methodological foundation for future RELICS operations. The successful construction and operation of this prototype confirm the feasibility of the core technologies and provide a crucial experimental basis for the final RELICS detector.

physics.ins-det

Design and characterization of a photosensor system for the RELICS experiment

In this paper, we present the design and characterization of a photosensor system developed for the RELICS experiment. An extended dynamic range base was designed to mitigate photomultiplier tube (PMT) saturation caused by intense cosmic muon backgrounds in the surface-level RELICS detector. The system employs dual readout from the anode and the seventh dynode to extend the linear response range of the PMT. In particular, our characterization and measurements of Hamamatsu R8520-406 PMTs confirm stable operation under positive high-voltage bias, extending the linear response range by more than an order of magnitude. Furthermore, a model of PMT saturation and recovery was developed to evaluate the influence of cosmic muon signals in the RELICS detector. The results demonstrate the system capability to detect coherent elastic neutrino-nucleus scattering signals under surface-level cosmic backgrounds, and suggest the potential to extend the scientific reach of RELICS to MeV-scale interactions.

physics.ins-det

A Novel Approach to the Initial Value Problem with a complete validated algorithm

We consider the first order autonomous differential equation (ODE) ${\bf x}'={\bf f}({\bf x})$ where ${\bf f}: {\mathbb R}^n\to{\mathbb R}^n$ is locally Lipschitz. For ${\bf x}_0\in{\mathbb R}^n$ and $h>0$, the initial value problem (IVP) for $({\bf f},{\bf x}_0,h)$ is to determine if there is a unique solution, i.e., a function ${\bf x}:[0,h]\to{\mathbb R}^n$ that satisfies the ODE with ${\bf x}(0)={\bf x}_0$. Write ${\bf x} ={\tt IVP}_{\bf f}({\bf x}_0,h)$ for this unique solution. We pose a corresponding computational problem, called the End Enclosure Problem: given $({\bf f},B_0,h,\varepsilon_0)$ where $B_0\subseteq{\mathbb R}^n$ is a box and $\varepsilon_0>0$, to compute a pair of non-empty boxes $(\underline{B}_0,B_1)$ such that $\underline{B}_0\subseteq B_0$, width of $B_1$ is $<\varepsilon_0$, and for all ${\bf x}_0\in \underline{B}_0$, ${\bf x}={\tt IVP}_{\bf f}({\bf x}_0,h)$ exists and ${\bf x}(h)\in B_1$. We provide a complete validated algorithm for this problem. Under the assumption (promise) that for all ${\bf x}_0\in B_0$, ${\tt IVP}_{\bf f}({\bf x}_0,h)$ exists, we prove the halting of our algorithm. This is the first halting algorithm for IVP problems in such a general setting. We also introduce novel techniques for subroutines such as StepA and StepB, and a scaffold datastructure to support our End Enclosure algorithm. Among the techniques are new ways refine full- and end-enclosures based on a {\bf radical transform} combined with logarithm norms. Our preliminary implementation and experiments show considerable promise, and compare well with current validated algorithms.

cs.SC

Reactor neutrino liquid xenon coherent elastic scattering experiment

Coherent elastic neutrino-nucleus scattering (CEvNS) provides a unique probe for neutrino properties Beyond the Standard Model (BSM) physics. REactor neutrino LIquid xenon Coherent Scattering experiment (RELICS), a proposed reactor neutrino program using liquid xenon time projection chamber (LXeTPC) technology, aims to investigate the CEvNS process of antineutrinos off xenon atomic nuclei. In this work, the design of the experiment is studied and optimized based on Monte Carlo (MC) simulations. To achieve a sufficiently low energy threshold for CEvNS detection, an ionization-only analysis channel is adopted for RELICS. A high emission rate of delayed electrons after a big ionization signal is the major background, leading to an analysis threshold of 120 photo-electrons in the CEvNS search. The second largest background, nuclear recoils induced by cosmic-ray neutrons, is suppressed via a passive water shield. The physics potential of RELICS is explored with a 32 kg*yr exposure at a baseline of 25 m from a reactor core with a 3 GW thermal power. In an energy range of 120 to 300 PE, corresponding to an average nuclear recoil from 0.63 to 1.36 keV considering the liquid xenon response and detector-related effect, we expect 4639.7 CEvNS and 1687.8 background events. The sensitivity of RELICS to the weak mixing angle is investigated at a low momentum transfer. Our study shows that RELICS can further improve the constraints on the non-standard neutrino interaction (NSI) compared to the current best results.

hep-ex

On the CR Nirenberg problem: density and multiplicity of solutions

We prove some results on the density and multiplicity of positive solutions to the prescribed Webster scalar curvature problem on the $(2n+1)$-dimensional standard unit CR sphere $(\mathbb{S} ^{2n+1},θ_0)$. Specifically, we construct arbitrarily many multi-bump solutions via the variational gluing method. In particular, we show the Webster scalar curvature functions of contact forms conformal to $θ_0$ are $C^{0}$-dense among bounded functions which are positive somewhere. Existence results of infinitely many positive solutions to the related equation $-Δ_{\mathbb{H}} u=R(ξ) u^{(n+2) /n}$ on the Heisenberg group $\Hn $ with $R(ξ)$ being asymptotically periodic with respect to left translation are also obtained. Our proofs make use of a refined analysis of bubbling behavior, gradient flow, Pohozaev identity, as well as blow up arguments.

math.AP