Design and characterization of a photosensor system for the RELICS experiment

Jijun Yang; Ruize Li; Chang Cai; Guocai Chen; Jiangyu Chen; Huayu Dai; Rundong Fang; Fei Gao; Jingfan Gu; Xiaoran Guo; Jiheng Guo; Gaojun Jin; Fali Ju; Yanzhou Hao; Yang Lei; Kaihang Li; Meng Li; Minhua Li; Shengchao Li; Siyin Li; Tao Li; Qing Lin; Jiajun Liu; Sheng Lv; Guang Luo; Kangwei Ni; Chuanping Shen; Mingzhuo Song; Lijun Tong; Jun Wang; Xiaoyu Wang; Wei Wang; Xiaoping Wang; Zihu Wang; Yuehuan Wei; Liming Weng; Xiang Xiao; Lingfeng Xie; Litao Yang; Long Yang; Jingqiang Ye; Jiachen Yu; Qian Yue; Yuyong Yue; Bingwei Zhang; Yuming Zhang; Yifei Zhao; Chenhui Zhu

doi:10.1088/1748-0221/21/02/p02039

Home/Archive/arXiv

arXiv · 2510.24196

Design and characterization of a photosensor system for the RELICS experiment

View original source ↗Read source document ↗Export metadata ↓

Abstract

In this paper, we present the design and characterization of a photosensor system developed for the RELICS experiment. An extended dynamic range base was designed to mitigate photomultiplier tube (PMT) saturation caused by intense cosmic muon backgrounds in the surface-level RELICS detector. The system employs dual readout from the anode and the seventh dynode to extend the linear response range of the PMT. In particular, our characterization and measurements of Hamamatsu R8520-406 PMTs confirm stable operation under positive high-voltage bias, extending the linear response range by more than an order of magnitude. Furthermore, a model of PMT saturation and recovery was developed to evaluate the influence of cosmic muon signals in the RELICS detector. The results demonstrate the system capability to detect coherent elastic neutrino-nucleus scattering signals under surface-level cosmic backgrounds, and suggest the potential to extend the scientific reach of RELICS to MeV-scale interactions.

Explore related subjects

physics.ins-det hep-ex

Keep this discovery

BibTeX RIS

Jijun Yang, Ruize Li, Chang Cai, Guocai Chen, Jiangyu Chen, Huayu Dai, Rundong Fang, Fei Gao, Jingfan Gu, Xiaoran Guo, Jiheng Guo, Gaojun Jin, Fali Ju, Yanzhou Hao, Yang Lei, Kaihang Li, Meng Li, Minhua Li, Shengchao Li, Siyin Li, Tao Li, Qing Lin, Jiajun Liu, Sheng Lv, Guang Luo, Kangwei Ni, Chuanping Shen, Mingzhuo Song, Lijun Tong, Jun Wang, Xiaoyu Wang, Wei Wang, Xiaoping Wang, Zihu Wang, Yuehuan Wei, Liming Weng, Xiang Xiao, Lingfeng Xie, Litao Yang, Long Yang, Jingqiang Ye, Jiachen Yu, Qian Yue, Yuyong Yue, Bingwei Zhang, Yuming Zhang, Yifei Zhao, Chenhui Zhu. 2025-10-28. Design and characterization of a photosensor system for the RELICS experiment. https://doi.org/10.1088/1748-0221%2F21%2F02%2Fp02039

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

High-Speed Semi-FE Readout Module for ATLAS MDT at HL-LHC: Design and Production-Level Characterization

The High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) introduces increased demands on the ATLAS Muon Spectrometer, particularly in terms of data throughput, timing distribution and system reliability. The Phase-II Chamber Service Module (CSM) is a key component of the upgraded Monitored Drift Tube (MDT) trigger and readout system, providing a high-speed interface between the front-end electronics and the backend systems. This paper describes the design and implementation of the Phase-II CSM, together with its validation. The results show that the CSM supports two independent optical uplinks, each operating at a line rate of 10.24 Gbps, together with clock distribution and slow control in the expected operating environment. Integration with small-diameter MDT (sMDT) chambers and tests with the prototype L0MDT trigger system are also presented. The CSM boards are now in production and will be used for installation and integration during the upcoming LHC Long Shutdown.

physics.ins-det↗

arXiv2026

Spectral Discrimination of Deposited Gamma-Ray Energies in a Simulated CeBr$_3$ Scintillator

We show that wavelength measurements of individual detected optical photons may provide additional information about gamma-ray energy deposited in a CeBr$_3$ crystal when the detected-photon-count distributions overlap for nearby gamma-ray energies. Monoenergetic 662 and 629 keV gammas are used in a Geant4 simulation of a $25\times25\times20~\mathrm{mm^3}$ CeBr$_3$ crystal. Assuming a light yield of $6.0\times10^4$ photons/MeV, a wavelength-independent photon-detection efficiency of 30%, and a wavelength resolution of $\sigma_{\lambda}=40$ nm, we find that the fraction of photons reconstructed above 385 nm gives an event-level separation of $\sim$ 2 standard deviations between the 662 and 629 keV event populations selected within the same $\sim$ 1%-wide detected-photon-count interval. No timing or reconstructed interaction-position information is used. The result demonstrates, within the present simulation model, that event-dependent optical spectra can retain energy information beyond an undifferentiated photon count.

physics.ins-det↗

arXiv2026

Operation of a negative ion gas time projection chamber without electronegative fill gases

The high fidelity reconstruction of particle tracks in micropatterned gaseous time projection chambers renders this technology ideal for future rare-event searches, including direction-sensitive dark matter experiments. Large drift distances are typically required for such experiments, so that the overall spatial resolution is limited by diffusion. Negative ion drift exhibits lower diffusion than electron drift and is thus an attractive option for realising a large-scale detector. The use of electronegative gases to create negative ions introduces technical challenges, most notably a reduction in gain when compared to conventional gas mixtures. In this study, we demonstrate a new method for negative ion generation via dissociative electron attachment using the conventional molecular fill gas CF$_4$. Our optical measurements of negative ion drift indicate electron attachment lengths of $<$1 mm and comparable gain to electron avalanches. The individual negative ion avalanches were also time-resolved, allowing the number of ions reaching the readout to be counted. We measure an improved energy resolution by single ion counting, relative to an integrated electron avalanche signal measured under identical gain conditions.

physics.ins-det↗