arXiv subjects

Chau Yuen

Publications and source records attributed to Chau Yuen.

At least 109 records · Page 6Linked to original sources

arXiv2025

Stacked Intelligent Metasurfaces-Aided eVTOL Delay Sensitive Communications

With rapid urbanization and increasing population density, urban traffic congestion has become a critical issue, and traditional ground transportation methods are no longer sufficient to address it effectively. To tackle this challenge, the concept of Advanced Air Mobility (AAM) has emerged, aiming to utilize low-altitude airspace to establish a three-dimensional transportation system. Among various components of the AAM system, electric vertical take-off and landing (eVTOL) aircraft plays a pivotal role due to their flexibility and efficiency. However, the immaturity of Ultra Reliable Low Latency Communication (URLLC) technologies poses significant challenges to safety-critical AAM operations. Specifically, existing Stacked Intelligent Metasurfaces (SIM)-based eVTOL systems lack rigorous mathematical frameworks to quantify probabilistic delay bounds under dynamic air traffic patterns, a prerequisite for collision avoidance and airspace management. To bridge this gap, we employ network calculus tools to derive the probabilistic upper bound on communication delay in the AAM system for the first time. Furthermore, we formulate a complex non-convex optimization problem that jointly minimizes the probabilistic delay bound and the propagation delay. To solve this problem efficiently, we propose a solution based on the Block Coordinate Descent (BCD) algorithm and Semidefinite Relaxation (SDR) method. In addition, we conduct a comprehensive analysis of how various factors impact regret and transmission rate, and explore the influence of varying load intensity and total delay on the probabilistic delay bound.

cs.NI↗

arXiv2025

A Federated Learning-based Lightweight Network with Zero Trust for UAV Authentication

Unmanned aerial vehicles (UAVs) are increasingly being integrated into next-generation networks to enhance communication coverage and network capacity. However, the dynamic and mobile nature of UAVs poses significant security challenges, including jamming, eavesdropping, and cyber-attacks. To address these security challenges, this paper proposes a federated learning-based lightweight network with zero trust for enhancing the security of UAV networks. A novel lightweight spectrogram network is proposed for UAV authentication and rejection, which can effectively authenticate and reject UAVs based on spectrograms. Experiments highlight LSNet's superior performance in identifying both known and unknown UAV classes, demonstrating significant improvements over existing benchmarks in terms of accuracy, model compactness, and storage requirements. Notably, LSNet achieves an accuracy of over $80\%$ for known UAV types and an Area Under the Receiver Operating Characteristic (AUROC) of $0.7$ for unknown types when trained with all five clients. Further analyses explore the impact of varying the number of clients and the presence of unknown UAVs, reinforcing the practical applicability and effectiveness of our proposed framework in real-world FL scenarios.

eess.SP↗

arXiv2025

Affine Frequency Division Multiplexing Over Wideband Doubly-Dispersive Channels With Time-Scaling Effects

The recently proposed affine frequency division multiplexing (AFDM) modulation has been considered as a promising technology for narrowband doubly-dispersive channels. However, the time-scaling effects, i.e., pulse widening and pulse shortening phenomena, in extreme wideband doubly-dispersive channels have not been considered in the literatures. In this paper, we investigate such wideband transmission and develop an efficient transmission structure with chirp-periodic prefix (CPP) and chirp-periodic suffix (CPS) for AFDM system. We derive the input-output relationship of AFDM system under time-scaled wideband doubly-dispersive channels and demonstrate the sparsity in discrete affine Fourier (DAF) domain equivalent channels. We further optimize the AFDM chirp parameters to accommodate the time-scaling characteristics in wideband doubly-dispersive channels and verify the superiority of the derived chirp parameters by pairwise error probability (PEP) analysis. We also develop an efficient cross domain distributed orthogonal approximate message passing (CD-D-OAMP) algorithm for AFDM symbol detection and analyze its corresponding state evolution. By analyzing the detection complexity of CD-D-OAMP detector and evaluating the error performance of AFDM systems based on simulations, we demonstrate that the AFDM system with our optimized chirp parameters outperforms the existing competitive modulation schemes in time-scaled wideband doubly-dispersive channels. Moreover, our proposed CD-D-OAMP detector can achieve the desirable trade-off between the complexity and performance, while supporting parallel computing to significantly reduce the computational latency.

cs.PF↗

arXiv2025

AI-Empowered Channel Generation for IoV Semantic Communications in Dynamic Conditions

The Internet of Vehicles (IoV) transforms the transportation ecosystem promising pervasive connectivity and data-driven approaches. Deep learning and generative Artificial Intelligence (AI) have the potential to significantly enhance the operation of applications within IoV by facilitating efficient decision-making and predictive capabilities, including intelligent navigation, vehicle safety monitoring, accident prevention, and intelligent traffic management. Nevertheless, efficiently transmitting and processing the massive volumes of data generated by the IoV in real-time remains a significant challenge, particularly in dynamic and unpredictable wireless channel conditions. To address these challenges, this paper proposes a semantic communication framework based on channel perception to improve the accuracy and efficiency of data transmission. The semantic communication model extracts and compresses the information to be transmitted. In addition, the wireless channel is estimated by using a generative diffusion model, which is employed to predict the dynamic channel states, thereby improving the quality of IoV service. In dynamic scenarios, however, the channel estimation performance may be degraded when substantially new scenarios take place, which will adversely affect user experience. To mitigate this limitation, we employ a large model to fine-tune the channel generation model to enhance its adaptability for varying scenarios. The performance and reliability of the proposed framework are evaluated on the two public datasets.

cs.NI↗

arXiv2025

Joint Task Offloading and Resource Allocation in Low-Altitude MEC via Graph Attention Diffusion

With the rapid development of the low-altitude economy, air-ground integrated multi-access edge computing (MEC) systems are facing increasing demands for real-time and intelligent task scheduling. In such systems, task offloading and resource allocation encounter multiple challenges, including node heterogeneity, unstable communication links, and dynamic task variations. To address these issues, this paper constructs a three-layer heterogeneous MEC system architecture for low-altitude economic networks, encompassing aerial and ground users as well as edge servers. The system is systematically modeled from the perspectives of communication channels, computational costs, and constraint conditions, and the joint optimization problem of offloading decisions and resource allocation is uniformly abstracted into a graph-structured modeling task. On this basis, we propose a graph attention diffusion-based solution generator (GADSG). This method integrates the contextual awareness of graph attention networks with the solution distribution learning capability of diffusion models, enabling joint modeling and optimization of discrete offloading variables and continuous resource allocation variables within a high-dimensional latent space. We construct multiple simulation datasets with varying scales and topologies. Extensive experiments demonstrate that the proposed GADSG model significantly outperforms existing baseline methods in terms of optimization performance, robustness, and generalization across task structures, showing strong potential for efficient task scheduling in dynamic and complex low-altitude economic network environments.

cs.NI↗

arXiv2025

Joint RIS-UE Association and Beamforming Design in RIS-Assisted Cell-Free MIMO Network

Reconfigurable intelligent surface (RIS)-assisted cell-free (CF) multiple-input multiple-output (MIMO) networks can significantly enhance system performance. However, the extensive deployment of RIS elements imposes considerable channel acquisition overhead, with the high density of nodes and antennas in RIS-assisted CF networks amplifying this challenge. To tackle this issue, in this paper, we explore integrating RIS-user equipment (UE) association into downlink RIS-assisted CF transmitter design, which greatly reduces the channel acquisition costs. The key point is that once UEs are associated with specific RISs, there is no need to frequently acquire channels from non-associated RISs. Then, we formulate the problem of joint RIS-UE association and beamforming at APs and RISs to maximize the weighted sum rate (WSR). In particular, we propose a two-stage framework to solve it. In the first stage, we apply a many-to-many matching algorithm to establish the RIS-UE association. In the second stage, we introduce a sequential optimization-based method that decomposes the joint optimization of RIS phase shifts and AP beamforming into two distinct subproblems. To optimize the RIS phase shifts, we employ the majorization-minimization (MM) algorithm to obtain a semi-closed-form solution. For AP beamforming, we develop a joint block diagonalization algorithm, which yields a closed-form solution. Simulation results demonstrate the effectiveness of the proposed algorithm and show that, while RIS-UE association significantly reduces overhead, it incurs a minor performance loss that remains within an acceptable range. Additionally, we investigate the impact of RIS deployment and conclude that RISs exhibit enhanced performance when positioned between APs and UEs.

eess.SP↗

arXiv2025

HybridRAG-based LLM Agents for Low-Carbon Optimization in Low-Altitude Economy Networks

Low-Altitude Economy Networks (LAENets) are emerging as a promising paradigm to support various low-altitude services through integrated air-ground infrastructure. To satisfy low-latency and high-computation demands, the integration of Unmanned Aerial Vehicles (UAVs) with Mobile Edge Computing (MEC) systems plays a vital role, which offloads computing tasks from terminal devices to nearby UAVs, enabling flexible and resilient service provisions for ground users. To promote the development of LAENets, it is significant to achieve low-carbon multi-UAV-assisted MEC networks. However, several challenges hinder this implementation, including the complexity of multi-dimensional UAV modeling and the difficulty of multi-objective coupled optimization. To this end, this paper proposes a novel Retrieval Augmented Generation (RAG)-based Large Language Model (LLM) agent framework for model formulation. Specifically, we develop HybridRAG by combining KeywordRAG, VectorRAG, and GraphRAG, empowering LLM agents to efficiently retrieve structural information from expert databases and generate more accurate optimization problems compared with traditional RAG-based LLM agents. After customizing carbon emission optimization problems for multi-UAV-assisted MEC networks, we propose a Double Regularization Diffusion-enhanced Soft Actor-Critic (R\textsuperscript{2}DSAC) algorithm to solve the formulated multi-objective optimization problem. The R\textsuperscript{2}DSAC algorithm incorporates diffusion entropy regularization and action entropy regularization to improve the performance of the diffusion policy. Furthermore, we dynamically mask unimportant neurons in the actor network to reduce the carbon emissions associated with model training. Simulation results demonstrate the effectiveness and reliability of the proposed HybridRAG-based LLM agent framework and the R\textsuperscript{2}DSAC algorithm.

cs.NI↗

arXiv2025

TeleMoM: Consensus-Driven Telecom Intelligence via Mixture of Models

Large language models (LLMs) face significant challenges in specialized domains like telecommunication (Telecom) due to technical complexity, specialized terminology, and rapidly evolving knowledge. Traditional methods, such as scaling model parameters or retraining on domain-specific corpora, are computationally expensive and yield diminishing returns, while existing approaches like retrieval-augmented generation, mixture of experts, and fine-tuning struggle with accuracy, efficiency, and coordination. To address this issue, we propose Telecom mixture of models (TeleMoM), a consensus-driven ensemble framework that integrates multiple LLMs for enhanced decision-making in Telecom. TeleMoM employs a two-stage process: proponent models generate justified responses, and an adjudicator finalizes decisions, supported by a quality-checking mechanism. This approach leverages strengths of diverse models to improve accuracy, reduce biases, and handle domain-specific complexities effectively. Evaluation results demonstrate that TeleMoM achieves a 9.7\% increase in answer accuracy, highlighting its effectiveness in Telecom applications.

cs.IT↗

arXiv2025

MEF-Explore: Communication-Constrained Multi-Robot Entropy-Field-Based Exploration

Collaborative multiple robots for unknown environment exploration have become mainstream due to their remarkable performance and efficiency. However, most existing methods assume perfect robots' communication during exploration, which is unattainable in real-world settings. Though there have been recent works aiming to tackle communication-constrained situations, substantial room for advancement remains for both information-sharing and exploration strategy aspects. In this paper, we propose a Communication-Constrained Multi-Robot Entropy-Field-Based Exploration (MEF-Explore). The first module of the proposed method is the two-layer inter-robot communication-aware information-sharing strategy. A dynamic graph is used to represent a multi-robot network and to determine communication based on whether it is low-speed or high-speed. Specifically, low-speed communication, which is always accessible between every robot, can only be used to share their current positions. If robots are within a certain range, high-speed communication will be available for inter-robot map merging. The second module is the entropy-field-based exploration strategy. Particularly, robots explore the unknown area distributedly according to the novel forms constructed to evaluate the entropies of frontiers and robots. These entropies can also trigger implicit robot rendezvous to enhance inter-robot map merging if feasible. In addition, we include the duration-adaptive goal-assigning module to manage robots' goal assignment. The simulation results demonstrate that our MEF-Explore surpasses the existing ones regarding exploration time and success rate in all scenarios. For real-world experiments, our method leads to a 21.32% faster exploration time and a 16.67% higher success rate compared to the baseline.

cs.RO↗

arXiv2025

Dynamical ON-OFF Control with Trajectory Prediction for Multi-RIS Wireless Networks

Reconfigurable intelligent surfaces (RISs) have demonstrated an unparalleled ability to reconfigure wireless environments by dynamically controlling the phase, amplitude, and polarization of impinging waves. However, as nearly passive reflective metasurfaces, RISs may not distinguish between desired and interference signals, which can lead to severe spectrum pollution and even affect performance negatively. In particular, in large-scale networks, the signal-to-interference-plus-noise ratio (SINR) at the receiving node can be degraded due to excessive interference reflected from the RIS. To overcome this fundamental limitation, we propose in this paper a trajectory prediction-based dynamical control algorithm (TPC) for anticipating RIS ON-OFF states sequence, integrating a long-short-term-memory (LSTM) scheme to predict user trajectories. In particular, through a codebook-based algorithm, the RIS controller adaptively coordinates the configuration of the RIS elements to maximize the received SINR. Our simulation results demonstrate the superiority of the proposed TPC method over various system settings.

cs.NI↗

arXiv2025

WirelessMathBench: A Mathematical Modeling Benchmark for LLMs in Wireless Communications

Large Language Models (LLMs) have achieved impressive results across a broad array of tasks, yet their capacity for complex, domain-specific mathematical reasoning-particularly in wireless communications-remains underexplored. In this work, we introduce WirelessMathBench, a novel benchmark specifically designed to evaluate LLMs on mathematical modeling challenges to wireless communications engineering. Our benchmark consists of 587 meticulously curated questions sourced from 40 state-of-the-art research papers, encompassing a diverse spectrum of tasks ranging from basic multiple-choice questions to complex equation completion tasks, including both partial and full completions, all of which rigorously adhere to physical and dimensional constraints. Through extensive experimentation with leading LLMs, we observe that while many models excel in basic recall tasks, their performance degrades significantly when reconstructing partially or fully obscured equations, exposing fundamental limitations in current LLMs. Even DeepSeek-R1, the best performer on our benchmark, achieves an average accuracy of only 38.05%, with a mere 7.83% success rate in full equation completion. By publicly releasing WirelessMathBench along with the evaluation toolkit, we aim to advance the development of more robust, domain-aware LLMs for wireless system analysis and broader engineering applications.

cs.CL↗

arXiv2025

Emerging Technologies in Intelligent Metasurfaces: Shaping the Future of Wireless Communications

Intelligent metasurfaces have demonstrated great promise in revolutionizing wireless communications. One notable example is the two-dimensional (2D) programmable metasurface, which is also known as reconfigurable intelligent surfaces (RIS) to manipulate the wireless propagation environment to enhance network coverage. More recently, three-dimensional (3D) stacked intelligent metasurfaces (SIM) have been developed to substantially improve signal processing efficiency by directly processing analog electromagnetic signals in the wave domain. Another exciting breakthrough is the flexible intelligent metasurface (FIM), which possesses the ability to morph its 3D surface shape in response to dynamic wireless channels and thus achieve diversity gain. In this paper, we provide a comprehensive overview of these emerging intelligent metasurface technologies. We commence by examining recent experiments of RIS and exploring its applications from four perspectives. Furthermore, we delve into the fundamental principles underlying SIM, discussing relevant prototypes as well as their applications. Numerical results are also provided to illustrate the potential of SIM for analog signal processing. Finally, we review the state-of-the-art of FIM technology, discussing its impact on wireless communications and identifying the key challenges of integrating FIMs into wireless networks.

cs.IT↗

arXiv2025

Over-the-Air ODE-Inspired Neural Network for Dual Task-Oriented Semantic Communications

Analog machine-learning hardware platforms promise greater speed and energy efficiency than their digital counterparts. Specifically, over-the-air analog computation allows offloading computation to the wireless propagation through carefully constructed transmitted signals. In addition, reconfigurable intelligent surface (RIS) is emerging as a promising solution for next-generation wireless networks, offering the ability to tailor the communication environment. Leveraging the advantages of RIS, we design and implement the ordinary differential equation (ODE) neural network using over-the-air computation (AirComp) and demonstrate its effectiveness for dual tasks. We engineer the ambient wireless propagation environment through distributed RISs to create an architecture termed the over-the-air ordinary differential equation (Air-ODE) network. Unlike the conventional digital ODE-inspired neural network, the Air-ODE block utilizes the physics of wave reflection and the reconfigurable phase shifts of RISs to implement an ODE block in the analog domain, enhancing spectrum efficiency. Moreover, the advantages of Air-ODE are demonstrated in a deep learning-based semantic communication (DeepSC) system by extracting effective semantic information to reduce the data transmission load, while achieving the dual functions of image reconstruction and semantic tagging simultaneously at the receiver. Simulation results show that the analog Air-ODE network can achieve similar performance to the digital ODE-inspired network. Specifically, for the image reconstruction and semantic tagging task, compared with the analog network without the Air-ODE block, the Air-ODE block can achieve around 2 times gain in both reconstruction quality and tagging accuracy.

eess.SP↗

arXiv2025

Compact Varactor-Integrated RIS for Wideband and Continuously Tunable Beamforming

This letter presents a novel Reconfigurable Intelligent Surface (RIS) that features a low-profile structure, wide operating bandwidth, and continuous phase control. By incorporating a middle patch layer without introducing an additional air gap, the proposed design maintains a thin form factor, while achieving a smooth 310° phase shift over 10\% bandwidth at 6.1 GHz with excellent reflection. A fabricated 10*10 RIS array exhibits stable performance, enabling precise beam control across a 600 MHz bandwidth. These results highlight the potential of the proposed low-profile, wideband RIS with continuous phase tuning for next-generation wireless communication systems.

eess.SP↗

arXiv2025

GDSG: Graph Diffusion-based Solution Generator for Optimization Problems in MEC Networks

Optimization is crucial for MEC networks to function efficiently and reliably, most of which are NP-hard and lack efficient approximation algorithms. This leads to a paucity of optimal solution, constraining the effectiveness of conventional deep learning approaches. Most existing learning-based methods necessitate extensive optimal data and fail to exploit the potential benefits of suboptimal data that can be obtained with greater efficiency and effectiveness. Taking the multi-server multi-user computation offloading (MSCO) problem, which is widely observed in systems like Internet-of-Vehicles (IoV) and Unmanned Aerial Vehicle (UAV) networks, as a concrete scenario, we present a Graph Diffusion-based Solution Generation (GDSG) method. This approach is designed to work with suboptimal datasets while converging to the optimal solution large probably. We transform the optimization issue into distribution-learning and offer a clear explanation of learning from suboptimal training datasets. We build GDSG as a multi-task diffusion model utilizing a Graph Neural Network (GNN) to acquire the distribution of high-quality solutions. We use a simple and efficient heuristic approach to obtain a sufficient amount of training data composed entirely of suboptimal solutions. In our implementation, we enhance the backbone GNN and achieve improved generalization. GDSG also reaches nearly 100\% task orthogonality, ensuring no interference between the discrete and continuous generation tasks. We further reveal that this orthogonality arises from the diffusion-related training loss, rather than the neural network architecture itself. The experiments demonstrate that GDSG surpasses other benchmark methods on both the optimal and suboptimal training datasets. The MSCO datasets has open-sourced at this http URL, as well as the GDSG algorithm codes at https://github.com/qiyu3816/GDSG.

cs.NI↗

arXiv2025

Stacked Intelligent Metasurfaces for Multiuser Downlink Beamforming in the Wave Domain

Intelligent metasurface has recently emerged as a promising technology that enables the customization of wireless environments by harnessing large numbers of low-cost reconfigurable scattering elements. However, prior studies have predominantly focused on single-layer metasurfaces, which have limitations in terms of wave-domain processing capabilities due to practical hardware limitations. In contrast, this paper introduces a novel stacked intelligent metasurface (SIM) design. Specifically, we investigate the integration of SIM into the downlink of a multiuser multiple-input single-output (MISO) communication system, where an SIM, consisting of a multilayer metasurface structure, is deployed at the base station (BS) to facilitate transmit beamforming in the electromagnetic wave domain. This eliminates the need for conventional digital beamforming and high-resolution digital-to-analog converters at the BS. To this end, an optimization problem is formulated to maximize the sum rate of all user equipments by jointly optimizing the transmit power allocation at the BS and the wave-based beamforming at the SIM, subject to constraints on the transmit power budget and discrete phase shifts. Furthermore, we propose a computationally efficient algorithm for solving the formulated joint optimization problem and elaborate on the potential benefits of employing SIM in wireless networks. Numerical results are illustrated to corroborate the effectiveness of the proposed SIM-enabled wave-based beamforming design and to evaluate the performance improvement achieved by the proposed algorithm compared to various benchmark schemes. It is demonstrated that considering the same number of transmit antennas, the proposed SIM-based system achieves about 200\% improvement in terms of sum rate compared to conventional MISO systems. The code for this paper is available at \url{https://github.com/JianchengAn}.

cs.IT↗

arXiv2025

Energy-Efficient SIM-assisted Communications: How Many Layers Do We Need?

The stacked intelligent metasurface (SIM), comprising multiple layers of reconfigurable transmissive metasurfaces, is becoming an increasingly viable solution for future wireless communication systems. In this paper, we explore the integration of SIM in a multi-antenna base station for application to downlink multi-user communications, and a realistic power consumption model for SIM-assisted systems is presented. Specifically, we focus on maximizing the energy efficiency (EE) for hybrid precoding design, i.e., the base station digital precoding and SIM wave-based beamforming. Due to the non-convexity and high complexity of the formulated problem, we employ the quadratic transformation method to reformulate the optimization problem and propose an alternating optimization (AO)-based joint precoding framework. Specifically, a successive convex approximation (SCA) algorithm is adopted for the base station precoding design. For the SIM wave-based beamforming, two algorithms are employed: the high-performance semidefinite programming (SDP) method and the low-complexity projected gradient ascent (PGA) algorithm. In particular, the results indicate that while the optimal number of SIM layers for maximizing the EE and spectral efficiency differs, a design of 2 to 5 layers can achieve satisfactory performance for both. Finally, numerical results are illustrated to evaluate the effectiveness of the proposed hybrid precoding framework and to showcase the performance enhancement achieved by the algorithm in comparison to benchmark schemes.

cs.IT↗

arXiv2025

Beamforming Design and Association Scheme for Multi-RIS Multi-User mmWave Systems Through Graph Neural Networks

Reconfigurable intelligent surface (RIS) is emerging as a promising technology for next-generation wireless communication networks, offering a variety of merits such as the ability to tailor the communication environment. Moreover, deploying multiple RISs helps mitigate severe signal blocking between the base station (BS) and users, providing a practical and efficient solution to enhance the service coverage. However, fully reaping the potential of a multi-RIS aided communication system requires solving a non-convex optimization problem. This challenge motivates the adoption of learning-based methods for determining the optimal policy. In this paper, we introduce a novel heterogeneous graph neural network (GNN) to effectively leverage the graph topology of a wireless communication environment. Specifically, we design an association scheme that selects a suitable RIS for each user. Then, we maximize the weighted sum rate (WSR) of all the users by iteratively optimizing the RIS association scheme, and beamforming designs until the considered heterogeneous GNN converges. Based on the proposed approach, each user is associated with the best RIS, which is shown to significantly improve the system capacity in multi-RIS multi-user millimeter wave (mmWave) communications. Specifically, simulation results demonstrate that the proposed heterogeneous GNN closely approaches the performance of the high-complexity alternating optimization (AO) algorithm in the considered multi-RIS aided communication system, and it outperforms other benchmark schemes. Moreover, the performance improvement achieved through the RIS association scheme is shown to be of the order of 30%.

eess.SP↗