arXiv subjects

Christian Koos

Publications and source records attributed to Christian Koos.

At least 55 records · Page 3Linked to original sources

arXiv2019

Comb-based WDM transmission at 10 Tbit/s using a DC-driven quantum-dash mode-locked laser diode

Chip-scale frequency comb generators have the potential to become key building blocks of compact wavelength-division multiplexing (WDM) transceivers in future metropolitan or campus-area networks. Among the various comb generator concepts, quantum-dash (QD) mode-locked laser diodes (MLLD) stand out as a particularly promising option, combining small footprint with simple operation by a DC current and offering flat broadband comb spectra. However, the data transmission performance achieved with QD-MLLD was so far limited by strong phase noise of the individual comb tones, restricting experiments to rather simple modulation formats such as quadrature phase shift keying (QPSK) or requiring hard-ware-based compensation schemes. Here we demonstrate that these limitations can be over-come by digital symbol-wise phase tracking algorithms, avoiding any hardware-based phase-noise compensation. We demonstrate 16QAM dual-polarization WDM transmission on 38 channels at an aggregate net data rate of 10.68 Tbit/s over 75 km of standard single-mode fiber. To the best of our knowledge, this corresponds to the highest data rate achieved through a DC-driven chip-scale comb generator without any hardware-based phase-noise reduction schemes.

eess.SP↗

arXiv2019

Hybrid 2D/3D photonic integration for non-planar circuit topologies

Complex photonic integrated circuits (PIC) may have strongly non-planar topologies that require waveguide crossings (WGX) when realized in single-layer integration platforms. The number of WGX increases rapidly with the complexity of the circuit, in particular when it comes to highly interconnected optical switch topologies. Here, we present a concept for WGX-free PIC that rely on 3D-printed freeform waveguide overpasses (WOP). We experimentally demonstrate the viability of our approach using the example of a $4 \times 4$ switch-and-select (SAS) circuit realized on the silicon photonic platform. We further present a comprehensive graph-theoretical analysis of different $n \times n$ SAS circuit topologies. We find that for increasing port counts $n$ of the SAS circuit, the number of WGX increases with $n^4$, whereas the number of WOP increases only in proportion to $n^2$.

cs.ET↗

arXiv2019

Wireless THz link with optoelectronic transmitter and receiver

Photonics might play a key role in future wireless communication systems that operate at THz carrier frequencies. A prime example is the generation of THz data streams by mixing optical signals in high-speed photodetectors. Over the previous years, this concept has enabled a series of wireless transmission experiments at record-high data rates. Reception of THz signals in these experiments, however, still relied on electronic circuits. In this paper, we show that wireless THz receivers can also greatly benefit from optoelectronic signal processing techniques, in particular when carrier frequencies beyond 0.1 THz and wideband tunability over more than an octave is required. Our approach relies on a high-speed photoconductor and a photonic local oscillator for optoelectronic down-conversion of THz data signals to an intermediate frequency band that is easily accessible by conventional microelectronics. By tuning the frequency of the photonic local oscillator, we can cover a wide range of carrier frequencies between 0.03 THz and 0.34 THz. We demonstrate line rates of up to 10 Gbit/s on a single channel and up to 30 Gbit/s on multiple channels over a distance of 58 m. To the best of our knowledge, our experiments represent the first demonstration of a THz transmission link that exploits optoelectronic signal processing techniques both at the transmitter and the receiver.

physics.app-ph↗

arXiv2018

THz-to-Optical Conversion in Wireless Communications Using an Ultra-Broadband Plasmonic Modulator

Future wireless communication networks have to handle data rates of tens or even hundreds of Gbit/s per link, requiring carrier frequencies in the unallocated terahertz (THz) spectrum. In this context, seamless integration of THz links into existing fiber-optic infrastructures is of great importance to complement the inherent portability and flexibility advantages of wireless networks by the reliable and virtually unlimited capacity of optical transmission systems. On the technological level, this requires novel device and signal processing concepts for direct conversion of data streams between the THz and the optical domains. Here, we report on the first demonstration of a THz link that is seamlessly integrated into a fiber-optic network using direct terahertz-to-optical (T/O) conversion at the wireless receiver. We exploit an ultra-broadband silicon-plasmonic modulator having a 3 dB bandwidth in excess of 0.36 THz for T/O conversion of a 50 Gbit/s data stream that is transmitted on a 0.2885 THz carrier over a 16 m-long wireless link. Optical-to-terahertz (O/T) conversion at the wireless transmitter relies on photomixing in a uni-travelling-carrier photodiode.

physics.app-ph↗

arXiv2018

3D-Printed Optics for Wafer-Scale Probing

Mass production of photonic integrated circuits requires high-throughput wafer-level testing. We demonstrate that optical probes equipped with 3D-printed elements allow for efficient coupling of light to etched facets of nanophotonic waveguides. The technique is widely applicable to different integration platforms.

physics.app-ph↗

arXiv2018

Micro-lens array as tip-tilt sensor for single-mode fiber coupling

We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fibers. The design in based on a previous prototype that utilized a multi-core fiber with seven single-mode fibers. With this updated design, we are able to achieve a better sensing throughput. We report on the modeled performance: if the beam is perfectly aligned, 69% light is coupled into the central single-mode fiber feeding the scientific instrument. When the beam is not aligned, some of the light will be coupled into the outer sensing fibers, providing the position of the beam for tip-tilt correction. For this design we show that there is a linear response in the sensing fibers when the beam is subject to tip-tilt movement. Furthermore we introduce an adaptive optics testbed, which we call the Koenigstuhl Observatory Opto-mechatronics Laboratory (KOOL), this testbed currently simulates vibrations at the Large Binocular Telescope, and in collaboration we have extended it to allow single-mode fiber coupling tests.

astro-ph.IM↗

arXiv2018

Demonstration of long-term thermally stable Silicon-Organic Hybrid Modulators at 85 °C

We report on the first demonstration of long-term thermally stable silicon-organic hybrid (SOH) modulators in accordance with Telcordia standards of high-temperature storage. The devices rely on an organic electro-optic sidechain polymer with a high glass transition temperature of 172 °C. In our high-temperature storage experiments at 85 °C, we find that the electro-optic activity converges to a constant long-term stable level after an initial decay. If we consider a burn-in time of 300 h, the π-voltage of the modulators increases on average by less than 15 % if we store the devices for additional 2400 h. The performance of the devices is demonstrated by generating high-quality 40 Gbit/s OOK signals both after the burn-in period and after extended high-temperature storage.

physics.app-ph↗

arXiv2018

Ultra-High Electro-Optic Activity Demonstrated in a Silicon-Organic Hybrid (SOH) Modulator

Efficient electro-optic (EO) modulators crucially rely on advanced materials that exhibit strong electro-optic activity and that can be integrated into high-speed and efficient phase shifter structures. In this paper, we demonstrate ultra-high in-device EO figures of merit of up to n3r33 = 2300 pm/V achieved in a silicon-organic hybrid (SOH) Mach-Zehnder Modulator (MZM) using the EO chromophore JRD1. This is the highest material-related in-device EO figure of merit hitherto achieved in a high-speed modulator at any operating wavelength. The π-voltage of the 1.5 mm-long device amounts to 210 mV, leading to a voltage-length product of UπL = 320 Vμm - the lowest value reported for MZM that are based on low-loss dielectric waveguides. The viability of the devices is demonstrated by generating high-quality on-off-keying (OOK) signals at 40 Gbit/s with Q factors in excess of 8 at a drive voltage as low as 140 mVpp. We expect that efficient high-speed EO modulators will not only have major impact in the field of optical communications, but will also open new avenues towards ultra-fast photonic-electronic signal processing.

physics.app-ph↗

arXiv2018

Silicon-plasmonic integrated circuits for terahertz signal generation and coherent detection

Optoelectronic signal processing offers great potential for generation and detection of ultra-broadband waveforms in the THz range, so-called T-waves. However, fabrication of the underlying high-speed photodiodes and photoconductors still relies on complex processes using dedicated III-V semiconductor substrates. This severely limits the application potential of current T-wave transmitters and receivers, in particular when it comes to highly integrated systems that combine photonic signal processing with optoelectronic conversion to THz frequencies. In this paper, we demonstrate that these limitations can be overcome by plasmonic internal photoemission detectors (PIPED). PIPED can be realized on the silicon photonic platform and hence allow to leverage the enormous opportunities of the associated device portfolio. In our experiments, we demonstrate both T-wave signal generation and coherent detection at frequencies of up to 1 THz. To proof the viability of our concept, we monolithically integrate a PIPED transmitter and a PIPED receiver on a common silicon photonic chip and use them for measuring the complex transfer impedance of an integrated T-wave device.

physics.optics↗

arXiv2018

Hybrid integration of silicon photonics circuits and InP lasers by photonic wire bonding

Efficient coupling of III-V light sources to silicon photonic circuits is one of the key challenges of integrated optics. Important requirements are low coupling losses, as well as small footprint and high yield of the overall assembly, along with the ability to use automated processes for large-scale production. In this paper, we demonstrate that photonic wire bonding addresses these challenges by exploiting direct-write two-photon lithography for in-situ fabrication of three-dimensional freeform waveguides between optical chips. In a series proof-of-concept experiments, we connect InP-based horizontal-cavity surface emitting lasers (HCSEL) to passive silicon photonic circuits with insertion losses down to 0.4 dB. To the best of our knowledge, this is the most efficient interface between an InP light source and a silicon photonic chip that has so far been demonstrated. Our experiments represent a key step in advancing photonic wire bonding to a universal integration platform for hybrid photonic multi-chip assemblies that combine known-good dies of different materials to high-performance hybrid multi-chip modules.

physics.app-ph↗

arXiv2017

Coherent modulation up to 100 GBd 16QAM using silicon-organic hybrid (SOH) devices

We demonstrate the generation of higher-order modulation formats using silicon-based inphase/quadrature (IQ) modulators at symbol rates of up to 100 GBd. Our devices exploit the advantages of silicon-organic hybrid (SOH) integration, which combines silicon-on-insulator waveguides with highly efficient organic electro-optic (EO) cladding materials to enable small drive voltages and sub-millimeter device lengths. In our experiments, we use an SOH IQ modulator with a π-voltage of 1.6 V to generate 100 GBd 16QAM signals. This is the first time that the 100 GBd mark is reached with an IQ modulator realized on a semiconductor substrate, leading to a single-polarization line rate of 400 Gbit/s. The peak-to-peak drive voltages amount to 1.5 Vpp, corresponding to an electrical energy dissipation in the modulator of only 25 fJ/bit.

physics.app-ph↗

arXiv2017

Silicon-Organic Hybrid (SOH) Mach-Zehnder Modulators for 100 Gbit/s On-Off Keying

Electro-optic modulators for high-speed on-off keying (OOK) are key components of short- and mediumreach interconnects in data-center networks. Besides small footprint and cost-efficient large-scale production, small drive voltages and ultra-low power consumption are of paramount importance for such devices. Here we demonstrate that the concept of silicon-organic hybrid (SOH) integration is perfectly suited for meeting these challenges. The approach combines the unique processing advantages of large-scale silicon photonics with unrivalled electro-optic (EO) coefficients obtained by molecular engineering of organic materials. In our proof-of-concept experiments, we demonstrate generation and transmission of OOK signals with line rates of up to 100 Gbit/s using a 1.1 mm-long SOH Mach-Zehnder modulator (MZM) which features a π-voltage of only 0.9 V. This experiment represents not only the first demonstration of 100 Gbit/s OOK on the silicon photonic platform, but also leads to the lowest drive voltage and energy consumption ever demonstrated at this data rate for a semiconductor-based device. We support our experimental results by a theoretical analysis and show that the nonlinear transfer characteristic of the MZM can be exploited to overcome bandwidth limitations of the modulator and of the electric driver circuitry. The devices are fabricated in a commercial silicon photonics line and can hence be combined with the full portfolio of standard silicon photonic devices. We expect that high-speed power-efficient SOH modulators may have transformative impact on short-reach optical networks, enabling compact transceivers with unprecedented energy efficiency that will be at the heart of future Ethernet interfaces at Tbit/s data rates.

physics.app-ph↗

arXiv2017

Ultrafast optical ranging using microresonator soliton frequency combs

Light detection and ranging (LIDAR) is critical to many fields in science and industry. Over the last decade, optical frequency combs were shown to offer unique advantages in optical ranging, in particular when it comes to fast distance acquisition with high accuracy. However, current comb-based concepts are not suited for emerging high-volume applications such as drone navigation or autonomous driving. These applications critically rely on LIDAR systems that are not only accurate and fast, but also compact, robust, and amenable to cost-efficient mass-production. Here we show that integrated dissipative Kerr-soliton (DKS) comb sources provide a route to chip-scale LIDAR systems that combine sub-wavelength accuracy and unprecedented acquisition speed with the opportunity to exploit advanced photonic integration concepts for wafer-scale mass production. In our experiments, we use a pair of free-running DKS combs, each providing more than 100 carriers for massively parallel synthetic-wavelength interferometry. We demonstrate dual-comb distance measurements with record-low Allan deviations down to 12 nm at averaging times of 14 $μ$s as well as ultrafast ranging at unprecedented measurement rates of up to 100 MHz. We prove the viability of our technique by sampling the naturally scattering surface of air-gun projectiles flying at 150 m/s (Mach 0.47). Combining integrated dual-comb LIDAR engines with chip-scale nanophotonic phased arrays, the approach could allow widespread use of compact ultrafast ranging systems in emerging mass applications.

physics.optics↗

arXiv2017

Microresonator solitons for massively parallel coherent optical communications

Optical solitons are waveforms that preserve their shape while propagating, relying on a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s, promising to overcome the limitations imposed by dispersion of optical fibers. These approaches, however, were eventually abandoned in favor of wavelength-division multiplexing (WDM) schemes that are easier to implement and offer improved scalability to higher data rates. Here, we show that solitons may experience a comeback in optical communications, this time not as a competitor, but as a key element of massively parallel WDM. Instead of encoding data on the soliton itself, we exploit continuously circulating dissipative Kerr solitons (DKS) in a microresonator. DKS are generated in an integrated silicon nitride microresonator by four-photon interactions mediated by Kerr nonlinearity, leading to low-noise, spectrally smooth and broadband optical frequency combs. In our experiments, we use two interleaved soliton Kerr combs to transmit a data stream of more than 50Tbit/s on a total of 179 individual optical carriers that span the entire telecommunication C and L bands. Equally important, we demonstrate coherent detection of a WDM data stream by using a pair of microresonator Kerr soliton combs - one as a multi-wavelength light source at the transmitter, and another one as a corresponding local oscillator (LO) at the receiver. This approach exploits the scalability advantages of microresonator soliton comb sources for massively parallel optical communications both at the transmitter and receiver side. Taken together, the results prove the significant potential of these sources to replace arrays of continuous-wave lasers in high-speed communications.

nlin.PS↗

arXiv2016

Single-laser 32.5 Tbit/s Nyquist WDM transmission

We demonstrate 32.5 Tbit/s 16QAM Nyquist WDM transmission over a total length of 227 km of SMF-28 without optical dispersion compensation. A number of 325 optical carriers are derived from a single laser and encoded with dual-polarization 16QAM data using sinc-shaped Nyquist pulses. As we use no guard bands, the carriers have a spacing of 12.5 GHz equal to the Nyquist bandwidth of the data. We achieve a high net spectral efficiency of 6.4 bit/s/Hz using a software-defined transmitter which generates the electrical modulator drive signals in real-time.

cs.NI↗

arXiv2015

Optical loss by surface transfer doping in silicon waveguides

We show that undoped silicon waveguides may suffer of up to 1.8 dB/cm free-carrier absorption caused by improper surface passivation. To verify the effects of free-carriers we apply a gate field to the waveguides. Smallest losses correspond to higher electrical sheet resistances and are generally obtained with non-zero gate fields. The presence of free carriers for zero gate field is attributed to surface transfer doping. These results open new perspectives for minimizing propagation losses in silicon waveguides and for obtaining low-loss and highly conductive silicon films without applying a gate voltage.

physics.optics↗

arXiv2015

Second-order nonlinear optical metamaterials: ABC-type nanolaminates

Structuring optical materials on a nanometer scale can lead to artificial effective media, or metamaterials, with strongly altered optical behavior. Metamaterials can provide a wide range of linear optical properties such as negative refractive index, hyperbolic dispersion, or magnetic behavior at optical frequencies. Nonlinear optical properties, however, have only been demonstrated for patterned metallic films which suffer from high optical losses. Here we show that second-order nonlinear metamaterials can also be obtained from non-metallic centrosymmetric constituents with inherently low optical absorption. In our proof-of-principle experiments, we have iterated atomic-layer deposition (ALD) of three different constituents, A = Al$_2$O$_3$, B = TiO$_2$ and C = HfO$_2$. The centrosymmetry of the resulting ABC stack is broken since the ABC and the inverted CBA sequences are not equivalent - a necessary condition for non-zero second-order nonlinearity. To the best of our knowledge, this is the first realization of a bulk nonlinear optical metamaterial.

cond-mat.mtrl-sci↗

arXiv2014

Coherent terabit communications with microresonator Kerr frequency combs

Optical frequency combs enable coherent data transmission on hundreds of wavelength channels and have the potential to revolutionize terabit communications. Generation of Kerr combs in nonlinear integrated microcavities represents a particularly promising option enabling line spacings of tens of GHz, compliant with wavelength-division multiplexing (WDM) grids. However, Kerr combs may exhibit strong phase noise and multiplet spectral lines, and this has made high-speed data transmission impossible up to now. Recent work has shown that systematic adjustment of pump conditions enables low phase-noise Kerr combs with singlet spectral lines. Here we demonstrate that Kerr combs are suited for coherent data transmission with advanced modulation formats that pose stringent requirements on the spectral purity of the optical source. In a first experiment, we encode a data stream of 392 Gbit/s on subsequent lines of a Kerr comb using quadrature phase shift keying (QPSK) and 16-state quadrature amplitude modulation (16QAM). A second experiment shows feedback-stabilization of a Kerr comb and transmission of a 1.44 Tbit/s data stream over a distance of up to 300 km. The results demonstrate that Kerr combs can meet the highly demanding requirements of multi-terabit/s coherent communications and thus offer a solution towards chip-scale terabit/s transceivers.

physics.optics↗