arXiv subjects

D. Sun

Publications and source records attributed to D. Sun.

At least 19 recordsLinked to original sources

arXiv2025

An Effective Two-Phase Genetic Algorithm for Solving the Resource Constrained Project Scheduling Problem (RCPSP)

This note presents a simple and effective variation of genetic algorithm (GA) for solving RCPSP, denoted as 2-Phase Genetic Algorithm (2PGA). The 2PGA implements GA parent selection in two phases: Phase-1 includes the best current solutions in the parent pool, and Phase-2 excludes the best current solutions from the parent pool. The 2PGA carries out the GA evolution by alternating the two phases iteratively. In exploring a solution space, the Phase-1 emphasizes intensification in current neighborhood, while the Phase-2 emphasizes diversification to escape local traps. The 2PGA was tested on the standard benchmark problems in PSPLIB, the results have shown that the algorithm is effective and has improved some of the best heuristic solutions.

cs.NE↗

arXiv2024

Unveiling accretion in the massive YSO G033.3891. Spatial and kinematic constraints from the CO bandhead emission

The inner parts of the hot discs surrounding massive young stellar objects (MYSOs) are still barely explored due to observational limitations in terms of angular resolution, scarcity of diagnostic lines and the embedded and rare nature of these targets. We present the first K-band spectro-interferometric observations toward the MYSO G033.3891, which based on former kinematic evidence via the CO bandhead emission is known to host an accreting disc. Using the high spectral resolution mode (R$\sim$4000) of the GRAVITY/VLTI, we spatially resolve the emission of the inner dusty disc and the crucial gaseous interface between the star and the dusty disc. Using detailed modelling on the K-band dust continuum and tracers known to be associated with the ionised and molecular gaseous interface (Br$\gamma$, CO), we report on the smallest scales of accretion/ejection. The new observations in combination with our geometric and kinematic models employed to fit former high spectral resolution observations on the source (R$\sim$30,000; CRIRES/VLTI) allow us to constrain the size of the inner gaseous disc both spatially and kinematically via the CO overtone emission at only 2 au. Our models reveal that both Br$\gamma$ and CO emissions are located well within the dust sublimation radius (5~au) as traced by the hot 2.2~$\mu$m dust continuum. Our paper provides the first case study where the tiniest scales of gaseous accretion around the MYSO G033.3891 are probed both kinematically and spatially via the CO bandhead emission. This analysis of G033.3891 stands as only the second instance of such investigation within MYSOs, underscoring the gradual accumulation of knowledge regarding how massive young stars gain their mass, while further solidifying the disc nature of accretion at the smallest scales of MYSOs.

astro-ph.GA↗

arXiv2022

Exploration of Wire Array Metamaterials for the Plasma Axion Haloscope

A plasma haloscope has recently been proposed as a feasible approach to extend the search for dark matter axions above 10 GHz ($\sim$ 40 $\mu$eV), whereby the microwave cavity in a conventional axion haloscope is supplanted by a wire array metamaterial. As the plasma frequency of a metamaterial is determined by its unit cell, and is thus a bulk property, a metamaterial resonator of any frequency can be made arbitrarily large, in contrast to a microwave cavity which incurs a steep penalty in volume with increasing frequency. We have investigated the basic properties of wire array metamaterials through $S_{21}$ measurements in the 10 GHz range. Excellent agreement with theoretical models is found, by which we project achievable quality factors to be of order $10^{4}$ in an actual axion search. Furthermore, schemes for tuning the array over a usable dynamic range ($30\%$ in frequency) appear practical from an engineering perspective.

hep-ex↗

arXiv2021

LCLS-II-HE verification cryomodule high gradient performance and quench behavior

An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen doping treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipacting. Dedicated vertical test experiments support the attribution to multipacting. The verification cryomodule achieved an acceleration voltage of 200 MV in continuous wave mode, corresponding to an average accelerating gradient of 24.1 MV/m, significantly exceeding the specification of 173 MV. The average Q0 (3.0x10^10) also exceeded its specification (2.7x10^10). After processing, no field emission was observed up to the maximum gradient of each cavity. This paper reviews the cryomodule performance and discusses operational issues and mitigations implemented during the several month program.

physics.acc-ph↗

arXiv2021

Quantum engineering with hybrid magnonics systems and materials

Quantum technology has made tremendous strides over the past two decades with remarkable advances in materials engineering, circuit design and dynamic operation. In particular, the integration of different quantum modules has benefited from hybrid quantum systems, which provide an important pathway for harnessing the different natural advantages of complementary quantum systems and for engineering new functionalities. This review focuses on the current frontiers with respect to utilizing magnetic excitatons or magnons for novel quantum functionality. Magnons are the fundamental excitations of magnetically ordered solid-state materials and provide great tunability and flexibility for interacting with various quantum modules for integration in diverse quantum systems. The concomitant rich variety of physics and material selections enable exploration of novel quantum phenomena in materials science and engineering. In addition, the relative ease of generating strong coupling and forming hybrid dynamic systems with other excitations makes hybrid magnonics a unique platform for quantum engineering. We start our discussion with circuit-based hybrid magnonic systems, which are coupled with microwave photons and acoustic phonons. Subsequently, we are focusing on the recent progress of magnon-magnon coupling within confined magnetic systems. Next we highlight new opportunities for understanding the interactions between magnons and nitrogen-vacancy centers for quantum sensing and implementing quantum interconnects. Lastly, we focus on the spin excitations and magnon spectra of novel quantum materials investigated with advanced optical characterization.

cond-mat.mes-hall↗

arXiv2020

Linear magnetoresistance with a universal energy scale in a strong-coupling superconductor

The recent discovery of a nonsaturating linear magnetoresistance in several correlated electron systems near a quantum critical point has revealed an interesting interplay between the linear magnetoresistance and the zero-field linear-in-temperature resistivity. These studies suggest a possible role of quantum criticality on the observed linear magnetoresistance. Here, we report our discovery of a nonsaturating, linear magnetoresistance in Mo$_8$Ga$_{41}$, a nearly isotropic strong electron-phonon coupling superconductor with a linear-in-temperature resistivity from the transition temperature to $\sim$55 K. The growth of the resistivity in field is comparable to that in temperature, provided that both quantities are measured in the energy unit. Our datasets are remarkably similar to magnetoresistance data of the optimally doped La$_{2-x}$Sr$_x$CuO$_4$, despite the clearly different crystal and electronic structures, and the apparent absence of quantum critical physics in Mo$_8$Ga$_{41}$. A new empirical scaling formula is developed, which is able to capture the key features of the low-temperature magnetoresistance data of Mo$_8$Ga$_{41}$, as well as the data of La$_{2-x}$Sr$_x$CuO$_4$.

cond-mat.supr-con↗

arXiv2019

Detection of hole pockets in the candidate type-II Weyl semimetal MoTe$_2$ from Shubnikov-de Haas quantum oscillations

The bulk electronic structure of $T_d$-MoTe$_2$ features large hole Fermi pockets at the Brillouin zone center ($\Gamma$) and two electron Fermi surfaces along the $\Gamma-X$ direction. However, the large hole pockets, whose existence has important implications for the Weyl physics of $T_d$-MoTe$_2$, has never been conclusively detected in quantum oscillations. This raises doubt about the realizability of Majorana states in $T_d$-MoTe$_2$, because these exotic states rely on the existence of Weyl points, which originated from the same band structure predicted by density functional theory (DFT). Here, we report an unambiguous detection of these elusive hole pockets via Shubnikov-de Haas (SdH) quantum oscillations. At ambient pressure, the quantum oscillation frequencies for these pockets are 988 T and 1513 T, when the magnetic field is applied along the $c$-axis. The quasiparticle effective masses $m^*$ associated with these frequencies are 1.50 $m_e$ and 2.77 $m_e$, respectively, indicating the importance of Coulomb interactions in this system. We further measure the SdH oscillations under pressure. At 13 kbar, we detected a peak at 1798 T with $m^*$ = 2.86 $m_e$. Relative to the oscillation data at a lower pressure, the amplitude of this peak experienced an enhancement, which can be attributed to the reduced curvature of the hole pockets under pressure. Combining our experimental data with DFT + $U$ calculations, where $U$ is the Hubbard parameter, our results shed light on why these important hole pockets have not been detected until now.

cond-mat.supr-con↗

arXiv2019

Nonsaturating large magnetoresistance in the high carrier density nonsymmorphic metal CrP

The band structure of high carrier density metal CrP features an interesting crossing at the Y point of the Brillouin zone. The crossing, which is protected by the nonsymmorphic symmetry of the space group, results in a hybrid, semi-Dirac-like energy-momentum dispersion relation near Y. The linear energy-momentum dispersion relation along Y-$\Gamma$ is reminiscent of the observed band structure in several semimetallic extremely large magnetoresistance (XMR) materials. We have measured the transverse magnetoresistance of CrP up to 14 T at temperatures as low as $\sim$ 16 mK. Our data reveal a nonsaturating, quadratic magnetoresistance as well as the behaviour of the so-called `turn-on' temperature in the temperature dependence of resistivity. Despite the difference in the magnitude of the magnetoresistance and the fact that CrP is not a semimetal, these features are qualitatively similar to the observations reported for XMR materials. Thus, the high-field electrical transport studies of CrP offer the prospect of identifying the possible origin of the nonsaturating, quadratic magnetoresistance observed in a wide range of metals.

cond-mat.str-el↗

arXiv2018

Reply to Comment on Optical detection of transverse spin-Seebeck effect in permalloy film using Sagnac interferometer microscopy (arXiv:1810.13220)

In their Comment, Kimling and Kuschel (hereafter the commenters) challenge our original interpretation of the magneto-optical Kerr effect (MOKE) measurements using ultrasensitive Sagnac interferometer, claiming that the transverse spin-Seebeck effect (TSSE) is not the only contribution to the measured change in the Kerr rotation angle from a Ni80Fe20 (NiFe) ferromagnetic (FM) slab subjected to a lateral temperature gradient in the presence of a magnetic field. The authors assert that: (1) the TSSE, in general, has not been completely proven so far, and that the existing theories, in particular the phonon magnon drag model that we have used in our publication, in fact cannot explain the original work of Uchida et al. (2) The commenters based their critique on an estimate of the magnitude of the measured effect, arguing that to observe the TSSE that we originally claimed, the temperature gradient in our measurements should have been much larger than the value we measured. In this Reply, firstly, we summarize previous literature reports on the TSSE response in FM metallic systems. Secondly, we dispute the estimate of the necessary large temperature gradient made by the commenters. Importantly, the Kerr effect sensitivity to spin accumulation (via the TSSE response) has not been recognized by the commenters, in fact it was mistakenly assumed that the Kerr effect sensitivity to the spin accumulation by the TSSE is the same as the Kerr sensitivity to the bulk magnetization change due to the temperature change. In conclusion, we show that the TSSE is the only viable interpretation of our original measurements, and that the phonon-magnon drag model is indeed capable of explaining our results.

cond-mat.mtrl-sci↗

arXiv2018

The FNAL Booster 2nd Harmonic RF Cavity

A second harmonic RF cavity which uses perpendicularly biased garnet for frequency tuning is currently being constructed for use in the Fermilab Booster. The cavity will operate at twice the fundamental RF frequency, from ~76 - 106 MHz, and will be turned on only during injection, and transition or extraction. Its main purpose is to reduce beam loss as required by Fermilab's Proton Improvement Plan (PIP). After three years of optimization and study, the cavity design has been finalized and all constituent parts have been received. We discuss the design aspects of the cavity and its associated systems, component testing, and status of the cavity construction.

physics.acc-ph↗

arXiv2018

PIP-II Injector Test Warm Front End: Commissioning Update

The Warm Front End (WFE) of the Proton Improvement Plan II Injector Test at Fermilab has been constructed to its full length. It includes a 15-mA DC, 30-keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT) with a switching dipole magnet, a 2.1 MeV CW RFQ, followed by a Medium Energy Beam Transport (MEBT) with various diagnostics and a dump. This report presents the commissioning status, focusing on beam measurements in the MEBT. In particular, a beam with the parameters required for injection into the Booster (5 mA, 0.55 ms macro-pulse at 20 Hz) was transported through the WFE.

physics.acc-ph↗

arXiv2018

Garnet Ring Measurements For The Fermilab Booster 2nd Harmonic Cavity

A perpendicularly biased tuneable 2nd harmonic cavity is being constructed for use in the Fermilab Booster. The cavity's tuner uses National Magnetics AL800 garnet as the tuning media. For quality control, the magnetic properties of the material and the uniformity of the properties within the tuner must be assessed. We describe two tests which are performed on the rings and on their corresponding witness samples.

physics.acc-ph↗

arXiv2018

Commissioning And First Results From The Fermilab Cryomodule Test Stand

A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans.

physics.acc-ph↗

arXiv2018

Status of the warm front end of PIP-II injector test

The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW compatible, pulsed H- SRF linac. To validate the concept of the front-end of such machine, a test accelerator known as PIP-II Injector Test (PIP2IT) is under construction. It includes a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV CWRFQ, followed by a Medium Energy Beam Transport (MEBT) that feeds the first of 2 cryomodules increasing the beam energy to about 25 MeV, and a High Energy Beam Transport section (HEBT) that takes the beam to a dump. The ion source, LEBT, RFQ, and initial version of the MEBT have been built, installed, and commissioned. This report presents the overall status of the warm front end.

physics.acc-ph↗

arXiv2018

A unified framework for heat and mass transport at the atomic scale

We present a unified framework to simulate heat and mass transport in systems of particles. The proposed framework is based on kinematic mean field theory and uses a phenomenological master equation to compute effective transport rates between particles without the need to evaluate operators. We exploit this advantage and apply the model to simulate transport phenomena at the nanoscale. We demonstrate that, when calibrated to experimentally-measured transport coefficients, the model can accurately predict transient and steady state temperature and concentration profiles even in scenarios where the length of the device is comparable to the mean free path of the carriers. Through several example applications, we demonstrate the validity of our model for all classes of materials, including ones that, until now, would have been outside the domain of computational feasibility.

physics.comp-ph↗

arXiv2017

Progress on the design of a perpendicularly biased 2nd harmonic cavity for the Fermilab Booster

A perpendicularly biased 2nd harmonic cavity is being designed and built for the Fermilab Booster. Its purpose is to flatten the bucket at injection and thus change the longitudinal beam distribution to decrease space charge effects. It can also help at extraction. The cavity frequency range is 76 - 106 MHz. The power amplifier will be built using the Y567B tetrode, which is also used for the fundamental mode cavities in the Fermilab Booster. We discuss recent progress on the cavity, the biasing solenoid design and plans for testing the tuner's garnet material.

physics.acc-ph↗

arXiv2016

Cascade of magnetic field induced Lifshitz transitions in the ferromagnetic Kondo lattice material YbNi4P2

A ferromagnetic quantum critical point is thought not to exist in two and three-dimensional metallic systems yet is realized in the Kondo lattice compound YbNi4(P,As)2, possibly due to its one-dimensionality. It is crucial to investigate the dimensionality of the Fermi surface of YbNi4P2 experimentally but common probes such as ARPES and quantum oscillation measurements are lacking. Here, we studied the magnetic field dependence of transport and thermodynamic properties of YbNi4P2. The Kondo effect is continuously suppressed and additionally we identify nine Lifshitz transitions between 0.4 and 18 T. We analyze the transport coefficients in detail and identify the type of Lifshitz transitions as neck or void type to gain information on the Fermi surface of YbNi4P2. The large number of Lifshitz transitions observed within this small energy window is unprecedented and results from the particular flat renormalized band structure with strong 4f-electron character shaped by the Kondo lattice effect.

cond-mat.str-el↗

arXiv2015

Status of the warm front end of PXIE

A CW-compatible, pulsed H- superconducting linac is envisaged as a possible path for upgrading Fermilab's injection complex. To validate the concept of the front- end of such a machine, a test accelerator (a.k.a. PXIE) is under construction. The warm part of this accelerator comprises a 10 mA DC, 30 keV H- ion source, a 2m-long LEBT, a 2.1 MeV CW RFQ, and a 10-m long MEBT that is capable of creating a large variety of bunch structures. The paper will report commissioning results of a partially assembled LEBT, status of RFQ manufacturing, and describe development of the MEBT, in particular, of elements of its chopping system.

physics.acc-ph↗