arXiv subjects

Daniel M. Harris

Publications and source records attributed to Daniel M. Harris.

At least 19 recordsLinked to original sources

arXiv2026

Surface Waves Alter Air Entrainment During Water Entry

When a sphere crosses an air-water interface it can entrain a significant volume of air, a process relevant to numerous naval, industrial, and environmental settings. While air entrainment through sphere impact onto quiescent baths has been extensively studied, real-world interfaces are inherently unsteady, and the influence of surface waves is less understood. In this Letter, we systematically investigate the effect of interfacial geometry on the air entrained by impacting hydrophobic spheres onto an axisymmetric wavefield. By analyzing the resulting cavity across a wide parameter space, including wave phase, driving amplitude, and frequency, we reveal that local interface deformation dramatically alters air entrainment. This effect is driven by a geometric modulation of the splash curtain, which shifts the transition between cavity closure modes. We demonstrate that the influence of the waves is fully described by the local wave slope at the radius of the sphere, which alongside the Weber number We and Bond number Bo, establishes a foundational parametric framework for predicting air entrainment and cavity metrics across highly dynamic, real-world surfaces like the open ocean.

physics.flu-dyn↗

arXiv2026

Controlled drop generation via ligament extraction from a static or vibrating liquid bath

We introduce a simple method for generating droplets at the surface of a liquid bath by rapidly stretching a liquid ligament with a spring-loaded cylindrical probe. By varying the probe radius $a$ and retraction length $L$, we identify three regimes. Overstretching a thin ligament produces multiple drops, while insufficient stretching of a thick ligament yields none. The optimal regime for single-drop generation lies in between. In the single-drop regime, the drop radius scales as $R \sim a^{2/3} L^{1/3}$, consistent with volume conservation of the stretched ligament. This method enables repeatable generation of single droplets (with <5% variation in $R$) on both still and vibrating baths and of ordered droplet lattices for pilot-wave hydrodynamics experiments.

physics.flu-dyn↗

arXiv2026

Hydrodynamic Resistance on Oscillating Planar Interfacial Bodies

We study the unsteady dynamics of floating planar bodies undergoing lateral oscillations along an air-water interface. Scaling arguments indicate that at high Womersley number and small oscillation amplitude the flow beneath the body can be approximated by an oscillatory Stokes boundary layer, yielding a leading-order description of the hydrodynamic resistance. Using magnetic actuation, we drive the interfacial bodies harmonically and measure the amplitude response and phase lag in steady state over a range of frequencies, masses, sizes, and shapes. This frequency-response framework enables direct extraction of effective added mass and damping coefficients, which we find to be consistent with oscillatory boundary-layer theory in the limit of small interfacial deformation. The transient behavior during startup is also shown to be accurately predicted by a history integral that captures the development of the oscillatory boundary layer beneath the body. This work also establishes a simple experimental platform for quantifying unsteady hydrodynamic forces at fluid interfaces.

physics.flu-dyn↗

arXiv2026

Vertical motion of a periodically driven floating disc

We present the results of a combined theoretical and experimental investigation into the vertical dynamics of floating discs subjected to an imposed time-periodic forcing. The axisymmetric and inviscid wavefield is governed by a linear elliptic boundary value problem with mixed boundary conditions, wherein the no-penetration boundary condition is satisfied under the disc while the free surface boundary conditions are enforced away from it. The problem is solved by recasting the system of partial differential equations as a second-kind Fredholm integral equation which is then solved numerically. The solution furnishes a prediction for the dependence of the disc's oscillation amplitude on the forcing frequency, which exhibits excellent agreement with experiments. We interpret our results physically by computing the added mass, wave damping and effective spring coefficients of the disc, both numerically for a range of forcing frequencies and analytically in the low-frequency limit.

physics.flu-dyn↗

arXiv2026

Meniscope: A Low-Cost Fluid Interface Visualizer

In this work, we describe the development and application of a low-cost fluid interface visualizer referred to as the ``Meniscope.'' The device works using a color-based surface gradient detector method that maps the gradient of an air-water interface to a specific color on a target pattern below using a converging lens. Sample experiments are outlined that showcase the working principle and functional versatility of the device. The device and assembly instructions were piloted in a hands-on workshop, with pertinent feedback reviewed herein. The Meniscope is a low-cost device that is capable of producing striking visualizations of static and dynamic free-surface deformations while introducing users to free-surface measurement techniques in an accessible and hands-on manner.

physics.optics↗

arXiv2025

Macroscopic Brownian Motion on a Chaotic Fluid Interface

Brownian motion is the erratic motion of an object due to collisions with the fluid in which it is immersed. In this work, we detail a tabletop laboratory demonstration of underdamped Brownian motion wherein a macroscopic particle resting on a driven fluid interface exhibits ballistic motion at short times and diffusive motion at long times. We observe the trajectory of a millimetric disk driven by a field of chaotic Faraday waves excited by a shaker. The crossover from ballistic to diffusive motion occurs at time and length scales experimentally accessible through particle tracking of a video recorded with a standard phone camera. Along with representative data, we provide a complete assembly guide, and operating procedure for students so that the experiment can be readily applied in the classroom. The tabletop setup can also be adapted for other student projects and active research topics relating to particle motion on a vibrating fluid interface.

physics.ed-ph↗

arXiv2025

Fast droplet impact onto slowly moving deep pools

When a fast droplet impacts a pool, the resulting ejecta sheet dynamics determine the final impact outcome. At low Capillary numbers, the ejecta sheet remains separate from a deep static pool, whilst at higher viscosities it develops into a lamella. Here, we show that the common natural scenario of a slowly moving deep pool can change the upstream impact outcome, creating highly three-dimensional dynamics no longer characterised by a single descriptor. By considering how pool movement constrains the evolution of the ejecta sheet angle, we reach a length-scale invariant parameterisation for the upstream transition that holds for a wide range of fluids and impact conditions. Direct numerical simulations show similar dynamics for an equivalent oblique impact, indicating that the pool boundary layer does not play a decisive role for low pool-droplet speed ratios. Our results also provide insight into the physical mechanism that underpins pool impact outcomes more generally.

physics.flu-dyn↗

arXiv2025

Bouncing to coalescence transition for droplet impact onto moving liquid pools

A droplet impacting a deep fluid bath is as common as rain over the ocean. If the impact is sufficiently gentle, the mediating air layer remains intact, and the droplet may rebound completely from the interface. In this work, we experimentally investigate the role of translational bath motion on the bouncing to coalescence transition. Over a range of parameters, we find that the relative bath motion systematically decreases the normal Weber number required to transition from bouncing to merging. Direct numerical simulations demonstrate that the depression created during impact combined with the translational motion of the bath enhances the air layer drainage on the upstream side of the droplet, ultimately favoring coalescence. A simple geometric argument is presented that rationalizes the collapse of the experimental threshold data, extending what is known for the case of axisymmetric normal impacts to the more general 3D scenario of interest herein.

physics.flu-dyn↗

arXiv2025

Droplet rebounds off a fluid bath at low Weber numbers

We present a method to simulate non-coalescing impacts and rebounds of droplets onto the free surface of a liquid bath, together with new experimental data, focused on the low-speed impact of droplets. The method is derived from first principles and imposes only natural geometric and kinematic constraints on the motion of the impacting interfaces, yielding predictions for the evolution of the contact area, pressure distribution, and wave field generated on both impacting masses. This work generalises an existing kinematic-match method whose prior applications dealt with deformation of the surface of the bath only; i.e., neglecting that of the droplet. The method's extension to include droplet deformation gives predictions that compare favourably with existing experimental results and our new experiments conducted in the low-Weber-number regime.

physics.flu-dyn↗

arXiv2025

Propulsion and interaction of wave-propelled interfacial particles

When a floating body is internally or externally vibrated, its self-generated wavefield can lead to steady propulsion along the interface. In this article, we review several related and recently discovered systems that leverage this propulsion mechanism and interact hydrodynamically with one another via these surface waves. Particles with an onboard oscillatory driver may self-propel by virtue of a fore-aft asymmetric wavefield, a phenomenon with demonstrated relevance to biological and artificial systems across scales. Freely floating particles on a vibrated fluid bath can also self-propel along straight paths, but may also rotate in place or move along curved arcs, depending sensitively on the particle asymmetries and driving parameters. Such surfing particles interact at a distance through their mutual capillary wavefield and exhibit a rich array of collective dynamics. Overall, these accessible, tunable, and visually appealing systems motivate future investigations into a number of outstanding questions in fundamental fluid mechanics, while potentially also informing advances in the fields of active matter, hydrodynamic quantum analogs, and robotics.

physics.flu-dyn↗

arXiv2025

Drop rebound at low Weber number

We study the rebound of drops impacting non-wetting substrates at low Weber number $We$ through experiment, direct numerical simulation, and reduced-order modeling. Submillimeter-sized drops are normally impacted onto glass slides coated with a thin viscous film that allows them to rebound without contact line formation. Experiments are performed with various drop viscosities, sizes, and impact velocities, and we directly measure metrics pertinent to spreading, retraction, and rebound using high-speed imaging. We complement experiments with direct numerical simulation and a fully predictive reduced-order model that applies natural geometric and kinematic constraints to simulate the drop shape and dynamics using a spectral method. At low $We$, drop rebound is characterized by a weaker dependence of the coefficient of restitution on $We$ than in the more commonly studied high-$We$ regime, with nearly $We$-independent rebound in the inertio-capillary limit, and an increasing contact time as $We$ decreases. Drops with higher viscosity or size interact with the substrate longer, have a lower coefficient of restitution, and stop bouncing sooner, in good quantitative agreement with our reduced-order model. In the inertio-capillary limit, low $We$ rebound has nearly symmetric spreading and retraction phases and a coefficient of restitution near unity. Increasing $We$ or viscosity breaks this symmetry, coinciding with a drop in the coefficient of restitution and an increased dependence on $We$. Lastly, the maximum drop deformation and spreading are related through energy arguments, providing a comprehensive framework for drop impact and rebound at low $We$.

physics.flu-dyn↗

arXiv2025

A simulation modeling framework for fluid motion and transport in a rocking bioreactor with application to cultivated meat production

Rocking or wave-mixed bioreactors have emerged as a promising innovation in the production of cultivated meat due to their disposable nature, low operating costs, and scalability. However, despite these advantages, the performance of rocking bioreactors is not well characterized in view of their relatively short history in the market and the wide range of geometrical and operating parameters. In the present study we develop a rigorous computational framework for this multiphase, multi-physics system to quantitatively evaluate mixing, oxygen transfer, and shear stress within a rectangular rocking bioreactor under various operating conditions. This framework is implemented using the Basilisk open-source platform. We use a second-order finite volume Navier-Stokes solver and a volume-of-fluid interface reconstruction scheme to accurately resolve the highly nonlinear fluid motion. By solving the advection-diffusion equation for a multi-fluid system, we examine mixing time and the oxygen mass transfer coefficient for different operating conditions, both of which show a strong relationship with steady streaming underlying the instantaneous laminar flow. We further highlight two critical hydrodynamic phenomena that significantly influence bioreactor performance. Firstly, we investigate the transitional regime from laminar to turbulent flow. Moreover, we identify specific operating conditions that trigger resonance within the bioreactor, enhancing mixing and oxygen transfer. We finally discuss the potential effects of shear stress and energy dissipation rate on cell survival. Our findings are expected to provide valuable insights and guidelines for designing optimized bioreactors to support the next-generation cultivated meat industry pipelines.

physics.flu-dyn↗

arXiv2025

CyberDiver: an untethered robotic impactor for water-entry experiments

We present the CyberDiver, an untethered robotic impactor capable of actively modulating the fluid physics during high-speed water entry. First, we utilize the CyberDiver to extend our understanding of the water entry of passively flexible systems, designing a high-bandwidth controller that enables the CyberDiver to operate as a cyber-physical system that permits an arbitrary programmable structural coupling to be experimentally tested. Onboard sensors record the body acceleration during impact and reveal that the introduction of damping or a nonlinear force-versus-displacement structural law can significantly reduce impact loading as compared to a linear elastic case, with implications for damage mitigation in aerospace and naval applications. Next, by operating the CyberDiver in a displacement control mode, we demonstrate that the splash size can be dramatically altered depending on the parameters of an active maneuver, laying a groundwork for better understanding the techniques of human competitive divers.

physics.flu-dyn↗

arXiv2024

FIEVel: A Fast InExpensive Velocimeter based on an optical mouse sensor

Fluid velocimetry is fundamental to a breadth of applications spanning academia and industry, however velocimetry at high temporal resolution is often prohibitively costly. Here, we introduce a Fast and InExpensive Velocimeter (FIEVel) based on an optical mouse sensor. At its core, the optical mouse sensor consists of a small pixel array that acquires image data at high rates, with onboard hardware to compute and output motion in two orthogonal axes directly. By adapting this widely available integrated circuit to fluid velocimetry, we demonstrate that FIEVel is capable of resolving two components of velocity non-intrusively in the bulk of a flowing fluid at rates up to 6.4 kHz, at orders of magnitude lower cost than traditional velocimetry devices. We demonstrate and validate the velocimeter across a range of flows, operating conditions, and illumination strategies. As a sample application, we measure the temporal spectrum of a grid-generated turbulent flow and show excellent agreement with traditional Particle Image Velocimetry (PIV) using a high-speed camera.

physics.flu-dyn↗

arXiv2024

Synchronization of wave-propelled capillary spinners

When a millimetric body is placed atop a vibrating liquid bath, the relative motion between the object and interface generates outward propagating waves with an associated momentum flux. Prior work has shown that isolated chiral objects, referred to as spinners, can thus rotate steadily in response to their self-generated wavefield. Here, we consider the case of two co-chiral spinners held at a fixed spacing from one another but otherwise free to interact hydrodynamically through their shared fluid substrate. Two identical spinners are able to synchronize their rotation, with their equilibrium phase difference sensitive to their spacing and initial conditions, and even cease to rotate when the coupling becomes sufficiently strong. Non-identical spinners can also find synchrony provided their intrinsic differences are not too disparate. A hydrodynamic wave model of the spinner interaction is proposed, recovering all salient features of the experiment. In all cases, the spatially periodic nature of the capillary wave coupling is directly reflected in the emergent equilibrium behaviors.

cond-mat.soft↗

arXiv2024

Diffusion-limited settling of highly porous particles in density-stratified fluids

The vertical transport of solid material in a stratified medium is fundamental to a number of environmental applications, with implications for the carbon cycle and nutrient transport in marine ecosystems. In this work, we study the diffusion-limited settling of highly porous particles in a density-stratified fluid through a combination of experiment, analysis, and numerical simulation. By delineating and appealing to the diffusion-limited regime wherein buoyancy effects due to mass adaptation dominate hydrodynamic drag, we derive a simple expression for the steady settling velocity of a sphere as a function of the density, size, and diffusivity of the solid, as well as the density gradient of the background fluid. In this regime, smaller particles settle faster, in contrast with most conventional hydrodynamic drag mechanisms. Furthermore, we outline a general mathematical framework for computing the steady settling speed of a body of arbitrary shape in this regime and compute exact results for the case of general ellipsoids. Using hydrogels as a highly porous model system, we validate the predictions with laboratory experiments in linear stratification for a wide range of parameters. Lastly, we show how the predictions can be applied to arbitrary slowly varying background density profiles and demonstrate how a measured particle position over time can be used to reconstruct the background density profile.

physics.flu-dyn↗

arXiv2024

Mermaid Cereal: Interactions and Pattern Formation in a Macroscopic Magnetocapillary SALR System

When particles are deposited at a fluid interface they tend to aggregate by capillary attraction to minimize the overall potential energy of the system. In this work, we embed floating millimetric disks with permanent magnets to introduce a competing repulsion effect and study their pattern formation in equilibrium. The pairwise energy landscape of two disks is described by a short-range attraction and long-range repulsion (SALR) interaction potential, previously documented in a number of microscopic systems. Such competing interactions enable a variety of pairwise equilibrium states, including the possibility of a local minimum energy corresponding to a finite disk spacing. Two-dimensional (2D) experiments and simulations in confined geometries demonstrate that as the areal packing fraction is increased, the dilute repulsion-dominated lattice state becomes unstable to the spontaneous formation of localized clusters, which eventually merge into a system-spanning striped pattern. Finally, we demonstrate that the equilibrium pattern can be externally manipulated by the application of a supplemental vertical magnetic force that remotely enhances the effective capillary attraction.

cond-mat.soft↗

arXiv2023

Slamming Forces During Water Entry of a Simple Harmonic Oscillator

When a blunt body impacts an air-water interface, large hydrodynamic forces often arise, a phenomenon many of us have unfortunately experienced in a failed dive or "belly flop." Beyond assessing risk to biological divers, an understanding and methods for remediation of such slamming forces are critical to the design of numerous engineered naval and aerospace structures. Herein we systematically investigate the role of impactor elasticity on the resultant structural loads in perhaps the simplest possible scenario: the water entry of a simple harmonic oscillator. Contrary to conventional intuition, we find that "softening" the impactor does not always reduce the peak impact force, but may also increase the force as compared to a fully rigid counterpart. Through our combined experimental and theoretical investigation, we demonstrate that the transition from force reduction to force amplification is delineated by a critical "hydroelastic" factor that relates the hydrodynamic and elastic timescales of the problem.

physics.flu-dyn↗