arXiv subjects

E. Perez

Publications and source records attributed to E. Perez.

At least 19 recordsLinked to original sources

arXiv2026

Monitoring antiproton numbers with a CMOS detector in a dense-track environment

The production of antihydrogen by the GBAR experiment at AD/ELENA requires good knowledge of the number of incident keV antiprotons, which can be problematic. We have used a commercial CMOS digital camera mounted around the experimental vacuum chamber to determine antiproton numbers from ionising particles created in the annihilation process on the surface of microchannel plate detectors which are used for beam imaging. We show that the multiplicity of emerging charged particles is as expected for individual annihilations of antiprotons with nucleons at rest, taking into account the surrounding material budget. Most of those particles are in the minimal ionising regime, but can be detected with nearly 100% efficiency in the CMOS pixel detector, while due to the thin depletion layer the device is insensitive to background gammas. Thanks to the high granularity and small pixel size millions of antiproton annihilations can be reconstructed in a dense tracking environment over a large dynamic range with good resolution. From cluster length studies of non perpendicular tracks the thickness of the depletion zone and effective detection area was estimated. The cluster length also allows for a monitoring of track angles. Antiproton numbers are determined from the number of reconstructed clusters in the CMOS sensor by means of the covered solid angle relative to a calibration measurements with well known beam intensities at the most upstream location of the GBAR apparatus. Material effects on the emerging annihilation products were estimated by Monte Carlo (Geant4) calculations, while annihilation artefacts on the complex surface of a microchannel plate are cancelled out in this approach. This method minimises largely systematic uncertainties, leading to a final error of roughly 10% for the reconstruction of absolute antiproton numbers.

physics.ins-det↗

arXiv2026

A determination of the backscattering probability of low-energy antiprotons

It is commonly assumed that antiprotons impinging on a material surface annihilate promptly with the nuclei of the material. However, at kinetic energies of a few keV, this assumption may not hold. As with low-energy protons, electrons or positrons that can be reflected from a target, they may undergo large-angle Coulomb scattering before annihilation occurs, thereby appearing to be "backscattered" from the material surface. This backscattering fraction, largely unknown, is a crucial ingredient to the determination of the production cross-section of antihydrogen atoms in the GBAR experiment. This paper presents a determination of the probability that 4 and 6 keV antiprotons backscatter on the surface of a Micro-Channel Plate detector used for beam imaging at GBAR. No evidence for backscattering has been found and an upper limit of 14% at 68% confidence level has been set on this probability. The impact of backscattering on the determination of the number of antiprotons that participate in antihydrogen production in GBAR is also addressed.

hep-ex↗

arXiv2026

Dependence of Momentum Transport on the Dominant Turbulence Regime in the DIII-D Tokamak

Accurate prediction of toroidal plasma rotation is essential for optimizing confinement and stability in future fusion devices. This work investigates turbulent core momentum transport in the DIII-D tokamak across a transition from ion-temperature-gradient (ITG)- to trapped-electron-mode (TEM)-dominated turbulence. A momentum transport framework previously developed for ASDEX Upgrade is applied to modulated neutral beam injection experiments, separating diffusive, convective, and residual-stress contributions via Fourier analysis of the rotation response. The dataset spans low-rotation conditions, dominant electron heating, and background ExB shearing rates below turbulence growth rates, accessing more reactor-relevant conditions. Gyrokinetic CGYRO and gyrofluid TGLF calculations confirm the scan covers an ITG-to-TEM transition. The analysis yields Prandtl numbers near unity. The pinch number shows no explicit dependence on the transition, instead ordering roughly with the logarithmic density gradient. The normalized residual stress, in contrast, exhibits a non-monotonic, V-shaped dependence across the transition: co-current in deep ITG and deep TEM regimes, near-zero or counter-current in the intermediate mixed-mode regime. This trend collapses onto an approximately linear dependence against electron kinetic profile gradients, suggesting residual stress generation by profile-shearing effects. Weaker background ExB shearing further shifts residual stress toward counter-current values. Linear CGYRO simulations for representative ITG and TEM discharges yield Prandtl and pinch numbers in good agreement with experiment, supporting gyrokinetic momentum-transport predictions in TEM-dominated regimes. These results indicate residual stress plays an important role in core rotation prediction for low-torque plasmas and should be included in predictive models of future reactor scenarios.

physics.plasm-ph↗

arXiv2026

Effective masses, Burstein-Moss shift, and bandgap renormalization in degenerate Al-doped ZnO from broadband ellipsometry and Hall measurements

A comprehensive methodology is developed to extract electron and hole effective masses in degenerate semiconductors through a simultaneous global fit of carrier concentration dependence of bandgap and plasma energy, explicitly incorporating band nonparabolicity. Broadband spectroscopic ellipsometry combined with Hall effect analyses enables accurate determination of the bandgap, plasma energy and carrier concentrations. The dielectric function of sputtered Al-doped ZnO thin films are modeled in the fundamental absorption region using an Elliott based model with overlapping excitonic transitions and Urbach tails, while free carrier absorption is described by a modified sernelius formula. Wide carrier concentrations are achieved via controlled deposition and post-annealing, revealing changes in electron effective masses and deviations from parabolic dispersion. Two nonparabolic models are compared, Pisarkiewicz, assuming spherically symmetric band with a step-function approximation of the Fermi-Dirac distribution and Nilsson, incorporating thermal and impurity effects. The latter is shown to capture accurately band nonparabolicity, yielding effective masses and nonparabolicity parameter consistent with bandgap evolution. This approach quantitatively separates Burstein-Moss shift and bandgap renormalization, reproducing carrier dependent bandgap shifts across a wide concentration range. Neglecting valence band contributions introduces systematic bias. Bandgap renormalization is further evaluated using plasmon pole and random phase approximations, underscoring the importance of many-body screening. This framework also enables determination of the Mott critical concentration and the fundamental absorption edge onset. Collectively, these results establish a reliable methodology for extracting band-structure parameters and bandgap shifts, extendable to other transparent conducting oxides.

cond-mat.mtrl-sci↗

arXiv2025

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.

hep-ex↗

arXiv2025

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.

physics.acc-ph↗

arXiv2024

Machine Learning-Assisted Measurement of Lepton-Jet Azimuthal Angular Asymmetries in Deep-Inelastic Scattering at HERA

In deep-inelastic positron-proton scattering, the lepton-jet azimuthal angular asymmetry is measured using data collected with the H1 detector at HERA. When the average transverse momentum of the lepton-jet system, $\lvert \vec{P}_\perp \rvert $, is much larger than the total transverse momentum of the system, $\lvert \vec{q}_\perp \rvert$, the asymmetry between parallel and antiparallel configurations, $\vec{P}_\perp$ and $\vec{q}_\perp$, is expected to be generated by initial and final state soft gluon radiation and can be predicted using perturbation theory. Quantifying the angular properties of the asymmetry therefore provides an additional test of the strong force. Studying the asymmetry is important for future measurements of intrinsic asymmetries generated by the proton's constituents through Transverse Momentum Dependent (TMD) Parton Distribution Functions (PDFs), where this asymmetry constitutes a dominant background. Moments of the azimuthal asymmetries are measured using a machine learning method for unfolding that does not require binning.

hep-ex↗

arXiv2024

Measurement of the 1-jettiness event shape observable in deep-inelastic electron-proton scattering at HERA

The H1 Collaboration reports the first measurement of the 1-jettiness event shape observable $τ_1^b$ in neutral-current deep-inelastic electron-proton scattering (DIS). The observable $τ_1^b$ is equivalent to a thrust observable defined in the Breit frame. The data sample was collected at the HERA $ep$ collider in the years 2003-2007 with center-of-mass energy of $\sqrt{s}=319\,\text{GeV}$, corresponding to an integrated luminosity of $351.1\,\text{pb}^{-1}$. Triple differential cross sections are provided as a function of $τ_1^b$, event virtuality $Q^2$, and inelasticity $y$, in the kinematic region $Q^2>150\,\text{GeV}^{2}$. Single differential cross section are provided as a function of $τ_1^b$ in a limited kinematic range. Double differential cross sections are measured, in contrast, integrated over $τ_1^b$ and represent the inclusive neutral-current DIS cross section measured as a function of $Q^2$ and $y$. The data are compared to a variety of predictions and include classical and modern Monte Carlo event generators, predictions in fixed-order perturbative QCD where calculations up to $\mathcal{O}(α_s^3)$ are available for $τ_1^b$ or inclusive DIS, and resummed predictions at next-to-leading logarithmic accuracy matched to fixed order predictions at $\mathcal{O}(α_s^2)$. These comparisons reveal sensitivity of the 1-jettiness observable to QCD parton shower and resummation effects, as well as the modeling of hadronization and fragmentation. Within their range of validity, the fixed-order predictions provide a good description of the data. Monte Carlo event generators are predictive over the full measured range and hence their underlying models and parameters can be constrained by comparing to the presented data.

hep-ex↗

arXiv2024

Measurement of groomed event shape observables in deep-inelastic electron-proton scattering at HERA

The H1 Collaboration at HERA reports the first measurement of groomed event shape observables in deep inelastic electron-proton scattering (DIS) at $\sqrt{s}=319$ GeV, using data recorded between the years 2003 and 2007 with an integrated luminosity of $351$ pb$^{-1}$. Event shapes provide incisive probes of perturbative and non-perturbative QCD. Grooming techniques have been used for jet measurements in hadronic collisions; this paper presents the first application of grooming to DIS data. The analysis is carried out in the Breit frame, utilizing the novel Centauro jet clustering algorithm that is designed for DIS event topologies. Events are required to have squared momentum-transfer $Q^2 > 150$ GeV$^2$ and inelasticity $ 0.2 < y < 0.7$. We report measurements of the production cross section of groomed event 1-jettiness and groomed invariant mass for several choices of grooming parameter. Monte Carlo model calculations and analytic calculations based on Soft Collinear Effective Theory are compared to the measurements.

hep-ex↗

arXiv2024

Observation and differential cross section measurement of neutral current DIS events with an empty hemisphere in the Breit frame

The Breit frame provides a natural frame to analyze lepton-proton scattering events. In this reference frame, the parton model hard interactions between a quark and an exchanged boson defines the coordinate system such that the struck quark is back-scattered along the virtual photon momentum direction. In Quantum Chromodynamics (QCD), higher order perturbative or non-perturbative effects can change this picture drastically. As Bjorken-$x$ decreases below one half, a rather peculiar event signature is predicted with increasing probability, where no radiation is present in one of the two Breit-frame hemispheres and all emissions are to be found in the other hemisphere. At higher orders in $\alpha_s$ or in the presence of soft QCD effects, predictions of the rate of these events are far from trivial, and that motivates measurements with real data. We report on the first observation of the empty current hemisphere events in electron-proton collisions at the HERA collider using data recorded with the H1 detector at a center-of-mass energy of 319 GeV. The fraction of inclusive neutral-current DIS events with an empty hemisphere is found to be $0.0112 \pm 3.9\,\%_\text{stat} \pm 4.5\,\%_\text{syst} \pm 1.6\,\%_\text{mod}$ in the selected kinematic region of $150< Q^2<1500$ GeV$^2$ and inelasticity $0.14< y<0.7$. The data sample corresponds to an integrated luminosity of 351.1 pb$^{-1}$, sufficient to enable differential cross section measurements of these events. The results show an enhanced discriminating power at lower Bjorken-$x$ among different Monte Carlo event generator predictions.

hep-ex↗

arXiv2023

Unbinned Deep Learning Jet Substructure Measurement in High $Q^2$ ep collisions at HERA

The radiation pattern within high energy quark- and gluon-initiated jets (jet substructure) is used extensively as a precision probe of the strong force as well as an environment for optimizing event generators with numerous applications in high energy particle and nuclear physics. Looking at electron-proton collisions is of particular interest as many of the complications present at hadron colliders are absent. A detailed study of modern jet substructure observables, jet angularities, in electron-proton collisions is presented using data recorded using the H1 detector at HERA. The measurement is unbinned and multi-dimensional, using machine learning to correct for detector effects. All of the available reconstructed object information of the respective jets is interpreted by a graph neural network, achieving superior precision on a selected set of jet angularities. Training these networks was enabled by the use of a large number of GPUs in the Perlmutter supercomputer at Berkeley Lab. The particle jets are reconstructed in the laboratory frame, using the $k_{\mathrm{T}}$ jet clustering algorithm. Results are reported at high transverse momentum transfer $Q^2>150$ GeV${}^2$, and inelasticity $0.2 < y < 0.7$. The analysis is also performed in sub-regions of $Q^2$, thus probing scale dependencies of the substructure variables. The data are compared with a variety of predictions and point towards possible improvements of such models.

hep-ex↗

arXiv2023

Description of Excitonic Absorption Using the Sommerfeld Enhancement Factor and Band-Fluctuations

One of the challenges of excitonic materials is the accurate determination of the exciton binding energy and bandgap. The difficulty arises from the overlap of the discrete and continuous excitonic absorption at the band edge. Many researches have modeled the shape of the absorption edge of such materials on the Elliott model and its several modifications such as non-parabolic bands, magnetic potentials and electro-hole-polaron interactions. However, exciton binding energies obtained from measured data often vary strongly depending on the chosen model. Here, we propose an alternative and rather simple approach, which has previously been successful in the determination of the optical bandgap of amorphous, direct and indirect semiconductors, based on the bands-fluctuations (BF) model. In this model, the fluctuations due to disorder, temperature or lattice vibrations give rise to the well known exponential distribution of band tail states (Urbach tails). This analysis results in an analytic equation with 5 parameters only. The binding energies and optical bandgaps of GaAs and the family of tri-halide perovskites ($\textrm{MAPbX}_{3}$), $\textrm{X=Br,I,Cl}$, over a wide range of temperatures, are obtained with this model. The results for the bandgap, linewidth and exciton binding energy are in good agreement with previous reports. Moreover, due to the polar nature of perovskites, the obtained binding energies can be compared with the ones computed with a theoretical model for polar materials via a model proposed by Kane et al. In this model, the exciton is surrounded by a cloud of virtual phonons interacting via the Fr$\ddot{\textrm{o}}$lich interaction. As a consequence, the upper bound for the binding energy of the exciton-polaron system is calculated. Coincidentally, these results are in good agreement with the optical constants obtained with the EBF model.

physics.app-ph↗

arXiv2022

New Optical Models for the Accurate Description of the Electrical Permittivity in Direct and Indirect Semiconductors

We propose new models to describe the imaginary part of the electrical permittivity of dielectric and semiconductor materials in the fundamental absorption region. We work out our procedure based on the well-known structure of the Tauc-Lorentz model and the band-fluctuations approach to derive a 5-parameter formula that describes the Urbach, Tauc and high-absorption regions of direct and indirect semiconductors. Main features of the models are the self-consistent generation of the exponential Urbach tail below the bandgap and the incorporation of the Lorentz oscillator behaviour due to electronic transitions above the fundamental region. We apply and test our models on optical data of direct (MAPbI$_{3}$, GaAs and InP), indirect (GaP and c-Si), and amorphous (a-Si) semiconductors, accurately describing the spectra of the imaginary part of the electrical permittivity. Lastly, we compare our models with other similarly inspired models to assess the optical bandgap, Urbach tail and oscillator central resonance energy.

physics.app-ph↗

arXiv2022

Study of CP violation in $B^\pm$ decays to $\overline{D^0}(D^0) K^\pm$ at FCCee

The great progress made recently in the sector of Flavor Physics has enabled to establish CP violation in the B-meson decays. The unitarity triangle derived from the unitarity relation $V_{ub}^* V_{ud} + V_{cb}^* V_{cd} + V_{tb}^* V_{td} = 0$ has been measured very precisely. To further asses our understanding of CP violation, it would be useful to carry out similar measurement of other triangles. In this note, we investigate the triangle derived from the relation $V_{ub}^* V_{us} + V_{cb}^* V_{cs} + V_{tb}^* V_{ts} = 0$. Two angles of this triangle ($α_s$ and $β_s$) could be measured very accurately at FCCee using the decays $B_s(\overline{B_s})\rightarrow D^\pm_sK^\mp$ and $B_s(\overline{B_s})\rightarrow J/ψϕ$ respectively, as discussed elsewhere by us. This note concentrates on the measurement of the third angle $γ_s$ using the modes $B^\pm \to \overline{D^0}(D^0)K^\pm$. We show that a direct measurement of the angle $γ_s$ is possible with some specific $B^\pm$ decays with an estimated resolution of the order of 1$^\circ$.

hep-ph↗

arXiv2022

Measurement of lepton-jet correlation in deep-inelastic scattering with the H1 detector using machine learning for unfolding

The first measurement of lepton-jet momentum imbalance and azimuthal correlation in lepton-proton scattering at high momentum transfer is presented. These data, taken with the H1 detector at HERA, are corrected for detector effects using an unbinned machine learning algorithm OmniFold, which considers eight observables simultaneously in this first application. The unfolded cross sections are compared to calculations performed within the context of collinear or transverse-momentum-dependent (TMD) factorization in Quantum Chromodynamics (QCD) as well as Monte Carlo event generators. The measurement probes a wide range of QCD phenomena, including TMD parton distribution functions and their evolution with energy in so far unexplored kinematic regions.

hep-ex↗

arXiv2021

Determination of the strong coupling constant $α_s(M_Z)$ in next-to-next-to-leading order QCD using H1 jet cross section measurements

The strong coupling constant $α_s(M_Z)$ is determined from inclusive jet and dijet cross sections in neutral-current deep-inelastic $ep$ scattering (DIS) measured at HERA by the H1 collaboration using next-to-next-to-leading order (NNLO) QCD predictions. The dependence of the NNLO predictions and of the resulting value of $α_s(M_Z)$ at the $Z$-boson mass $m_Z$ are studied as a function of the choice of the renormalisation and factorisation scales. Using inclusive jet and dijet data together, the strong coupling constant is determined to be $α_s(M_Z)=0.1166\,(19)_{\rm exp}\,(24)_{\rm th}$. Complementary, $α_s(M_Z)$ is determined together with parton distribution functions of the proton (PDFs) from jet and inclusive DIS data measured by the H1 experiment. The value $α_s(M_Z)=0.1147\,(25)_{\rm tot}$ obtained is consistent with the determination from jet data alone. The impact of the jet data on the PDFs is studied. The running of the strong coupling is tested at different values of the renormalisation scale and the results are found to be in agreement with expectations.

hep-ex↗

arXiv2020

CASTLE: performances and science cases

We present here the Calar Alto Schmidt-Lemaitre Telescope (CASTLE) concept, a technology demonstrator for curved detectors, that will be installed at the Calar Alto Observatory (Spain). This telescope has a wide field of view (2.36x1.56 deg^2) and a design, optimised to generate a Point Spread Function with very low level wings and reduced ghost features, which makes it considerably less susceptible to several systematic effects usually affecting similar systems. These characteristics are particularly suited to study the low surface brightness Universe. CASTLE will be able to reach surface brightness orders of magnitude fainter than the sky background level and observe the extremely extended and faint features around galaxies such as tidal features, stellar halos, intra-cluster light, etc. CASTLE will also be used to search and detect astrophysical transients such as gamma ray bursts (GRB), gravitational wave optical counterparts, neutrino counterparts, etc. This will increase the number of precisely localized GRBs from 20% to 60% (in the case of Fermi/GMB GRBs).

astro-ph.IM↗

arXiv2018

Testing the influence of acceleration on time dilation using a rotating MÖssbauer absorber

The aim of the experiment series was to test the influence of acceleration on time dilation by measuring the relative spectral shift between the resonance spectra of a rotating Mossbauer absorber with acceleration anti-parallel and parallel to the direction of the incident beam. Based on the experiences and know-how acquired in our previous experiments, We collected data for rotation frequencies up to 510Hz in both directions of rotation and also used different slits. For each run with high rotation, we observed a stable statistically significant relative shift between the spectra of the two states with opposite acceleration. This indicates the influence of acceleration on time dilation. However, we found that this shift also depends on the choice of the slit, and on the direction of rotation. These new unexpected findings, resulting from the loss of symmetry in obtaining the resonant lines in the two states, could overshadow the relative shift due to acceleration. This loss of the symmetry is caused by the deflection of the radiative decay due to the Nuclear Lighthouse effect from the rotating Mossbauer absorber. We also found that it is impossible to keep the alignment (between the optical and the dynamical rotor systems) with accuracy needed for such experiment, for long runs, which resulted in the reduction of the accuracy of the observed relative shift. These prevent us to claim with certainty the influence of acceleration on time dilation using the currently available technology. An improved KB optics with focal spot of less than 1 micron to avoid the use of a slit and a more rigid mounting of the rotor system, are necessary for the success of such experiment. Hopefully, these findings together with the indispensable plan for a conclusive experiment presented in the paper, will prove useful to future experimentalists wishing to pursue such an experiment.

physics.acc-ph↗