Searcharxiv⌕ Search

arXiv subjects

Eric D. Miller

Publications and source records attributed to Eric D. Miller.

At least 37 records · Page 2Linked to original sources

XRISM Observations of Accretion Disk Corona in Cyg X-2

We present the high-resolution X-ray spectrum of the Z-source Cygnus X-2, obtained with X-Ray Imaging and Spectroscopy Mission (XRISM). The observations have enabled a precise characterization of the Fe-K emission lines from the accretion disk corona (ADC) and a possible detection of an ultra-fast outflow (UFO). The ADC component has at least two distinct regions. The Fe-K emission lines are remarkably broad, with a velocity dispersion of $σ_v=2300^{+900}_{-700}$~km~s$^{-1}$. This can be larger than what was observed in previous Chandra observations ($1120\pm870$~km~s$^{-1}$) and recent XRISM observations of the similar Z-source GX 340+0 (360--800~km~s$^{-1}$). Furthermore, we marginally detect a blueshifted absorption feature, which we identify as either \ion{Fe}{26} or \ion{Fe}{25}, with outflow velocities of $-0.29c$ or $-0.26c$, respectively. The mass loss rate is $\dot{M}\sim10^{-8}M_\odot\,\mathrm{yr}^{-1}$. Our findings suggest that the ADC in Cyg X-2 has a kinematically active environment with a high degree of turbulence and kinetic energy.

astro-ph.HE↗

Unveiling Chemical Enrichment in the Abell 2029 Core with XRISM, XMM-Newton, and Chandra

We present new measurements of the chemical abundance pattern in the core of the nearby galaxy cluster Abell~2029, based on XRISM observations with Resolve (37 ks) and Xtend (500 ks), combined with archival data from XMM-Newton (EPIC, RGS) and Chandra. Fe abundances derived from Resolve, Xtend, and EPIC are broadly consistent, while RGS gives systematically lower values. Because the XRISM gate valve remained closed during these observations, Resolve spectral fitting is restricted to the 2--10 keV band, providing reliable constraints only for elements with strong lines in this band (S, Ar, Ca, Fe, Ni). Abundances of the $α$-elements are therefore derived using complementary observations from Xtend, EPIC, RGS, and Chandra. We construct an average X/Fe pattern in the cluster core by using Resolve exclusively for S/Fe, Ar/Fe, Ca/Fe, and Ni/Fe, and RGS + Xtend for O/Fe. The Ne/Fe ratio is averaged from Xtend, EPIC, RGS, and Chandra measurements; Mg/Fe from EPIC and Chandra measurements; and Si/Fe from Xtend, EPIC, and Chandra. Comparison with the supernovae yield models indicates that the observed abundance pattern in A2029 core is best reproduced by a combination of core-collapsed yields from low-metallicity progenitors ($Z_{\rm init}=0.001$) and a sub-Chandrasekhar-mass, double-degenerate Type Ia model. Additionally, we find an excess in Ca abundance in the core of A2029 that cannot be reproduced by the standard supernovae yield models.

astro-ph.GA↗

Cross Calibration of Galaxy Cluster Temperatures Measured with NuSTAR, XMM-Newton, and Chandra

The use of galaxy clusters to constrain cosmology is limited in part due to uncertainties in derived cluster masses, which often depend on the gas temperature. Unfortunately, there exists a longstanding discrepancy in temperature measurements of the same galaxy clusters made by the two most sensitive X-ray observatories, Chandra and XMM-Newton. The NuSTAR X-ray Observatory's greater sensitivity to the exponential turnover in the bremsstrahlung continuum allows for more precise and potentially more accurate galaxy cluster temperature estimates, especially given its unique ability to independently calibrate its optics in orbit. We present new NuSTAR spectra of 10 relaxed clusters ($5~\mathrm{keV} < kT < 10~\mathrm{keV}$), extracted from identical regions as previous spectra from Chandra and XMM-Newton. The 3--20~keV spectra are well fit by single temperature models, and fits done in narrower bandpasses provide no clear evidence in support of the existence of multi temperature gas. We find NuSTAR temperatures are typically $\sim 15\%$ higher than XMM-Newton temperatures. In contrast, good agreement is found between NuSTAR and Chandra temperatures for clusters with $kT \lesssim 7~\mathrm{keV}$, with Chandra measurements exceeding NuSTAR's in hotter systems. When more clusters are included, the trend is reinforced and can be extended to higher temperatures. A generic increase to Chandra's $E > 2~\mathrm{keV}$ effective area ($\sim 5\%$ at 5~keV) is found to explain the trend reasonably well. These results demonstrate the potential for NuSTAR data to address the two-decade-old temperature discrepancy between Chandra and XMM-Newton.

astro-ph.HE↗

XRISM constraints on unidentified X-ray emission lines, including the 3.5 keV line, in the stacked spectrum of ten galaxy clusters

We stack 3.75 Megaseconds of early XRISM Resolve observations of ten galaxy clusters to search for unidentified spectral lines in the $E=$ 2.5-15 keV band (rest frame), including the $E=3.5$ keV line reported in earlier, low spectral resolution studies of cluster samples. Such an emission line may originate from the decay of the sterile neutrino, a warm dark matter (DM) candidate. No unidentified lines are detected in our stacked cluster spectrum, with the $3σ$ upper limit on the $m_{\rm s}\sim$ 7.1 keV DM particle decay rate (which corresponds to a $E=3.55$ keV emission line) of $Γ\sim 1.0 \times 10^{-27}$ s$^{-1}$. This upper limit is 3-4 times lower than the one derived by Hitomi Collaboration et al. (2017) from the Perseus observation, but still 5 times higher than the XMM-Newton detection reported by Bulbul et al. (2014) in the stacked cluster sample. XRISM Resolve, with its high spectral resolution but a small field of view, may reach the sensitivity needed to test the XMM-Newton cluster sample detection by combining several years worth of future cluster observations.

astro-ph.HE↗

Mapping the Perseus Galaxy Cluster with XRISM: Gas Kinematic Features and their Implications for Turbulence

In this paper, we present extended gas kinematic maps of the Perseus cluster by combining five new XRISM/Resolve pointings observed in 2025 with four Performance Verification datasets from 2024, totaling 745 ks net exposure. To date, Perseus remains the only cluster that has been extensively mapped out to ~0.7$r_{2500}$ by XRISM/Resolve, while simultaneously offering sufficient spatial resolution to resolve gaseous substructures driven by mergers and AGN feedback. Our observations cover multiple radial directions and a broad dynamical range, enabling us to characterize the intracluster medium kinematics up to the scale of ~500 kpc. In the measurements, we detect high velocity dispersions ($\simeq$300 km/s) in the eastern region of the cluster, corresponding to a nonthermal pressure fraction of $\simeq$7-13%. The velocity field outside the AGN-dominant region can be effectively described by a single, large-scale kinematic driver based on the velocity structure function, which statistically favors an energy injection scale of at least a few hundred kpc. The estimated turbulent dissipation energy is comparable to the gravitational potential energy released by a recent merger, implying a significant role of turbulent cascade in the merger energy conversion. In the bulk velocity field, we observe a dipole-like pattern along the east-west direction with an amplitude of $\simeq\pm$200-300 km/s, indicating rotational motions induced by the recent merger event. This feature constrains the viewing direction to ~30$^\circ$-50$^\circ$ relative to the normal of the merger plane. Our hydrodynamic simulations suggest that Perseus has experienced at least two energetic mergers since redshift z~1, the latest associated with the radio galaxy IC310. This study showcases exciting scientific opportunities for future missions with high-resolution spectroscopic capabilities (e.g., HUBS, LEM, and NewAthena).

astro-ph.HE↗

Comparing XRISM cluster velocity dispersions with predictions from cosmological simulations: are feedback models too ejective?

The dynamics of the intra-cluster medium (ICM), the hot plasma that fills galaxy clusters, are shaped by gravity-driven cluster mergers and feedback from supermassive black holes (SMBH) in the cluster cores. XRISM measurements of ICM velocities in several clusters offer insights into these processes. We compare XRISM measurements for nine galaxy clusters (Virgo, Perseus, Centaurus, Hydra A, PKS\,0745--19, A2029, Coma, A2319, Ophiuchus) with predictions from three state-of-the-art cosmological simulation suites, TNG-Cluster, The Three Hundred Project GADGET-X, and GIZMO-SIMBA, that employ different models of feedback. In cool cores, XRISM reveals systematically lower velocity dispersions than the simulations predict, with all ten measurements below the median simulated values by a factor $1.5-1.7$ on average and all falling within the bottom $10\%$ of the predicted distributions. The observed kinetic-to-total pressure ratio is also lower, with a median value of $2.2\%$, compared to the predicted $5.0-6.5\%$ for the three simulations. Outside the cool cores and in non-cool-core clusters, simulations show better agreement with XRISM measurements, except for the outskirts of the relaxed, cool-core cluster A2029, which exhibits an exceptionally low kinetic pressure support ($<1\%$), with none of the simulated systems in either of the three suites reaching such low levels. The non-cool-core Coma and A2319 exhibit dispersions at the lower end but within the simulated spread. Our comparison suggests that the three numerical models may overestimate the kinetic effects of SMBH feedback in cluster cores. Additional XRISM observations of non-cool-core clusters will clarify if there is a systematic tension in the gravity-dominated regime as well.

astro-ph.GA↗

The intracluster light analysis of the most evolved systems of galaxies: fossil groups

We present the analysis of the intracluster light (ICL) in three fossil groups (FG), RXJ085640.72+055347.36, RX J1136+0713, and RX J1410+4145, at z ~ 0.1. We used two optical broad-band filters, F435W and F606W, observed with the Hubble Space Telescope and spectroscopic data obtained with the Gemini Multi-Object Spectrograph to generate the ICL maps and measure the ICL fraction using CICLE, an algorithm developed to disentangle the ICL from the light of galaxies. We found ICL fractions of 9.9% - 14.4%, 3.8% - 6.1%, and 4.7% - 10.7% for RXJ0856, RXJ1136, and RXJ1410, respectively. This behavior is not consistent with the presence of the ICL fraction excess previously observed in merging clusters and also inconsistent with the constant ICL fraction distribution characteristic of relaxed systems, although the values found are within the typical range expected for the latter. Instead, they show a significantly increasing trend with wavelengths over ~ 3800 - 5500A, indicating that fossil groups are indeed old and undisturbed systems, even compared with regular relaxed clusters.

astro-ph.GA↗

Stratified wind from a super-Eddington X-ray binary is slower than expected

Accretion discs in strong gravity ubiquitously produce winds, seen as blueshifted absorption lines in the X-ray band of both stellar mass X-ray binaries (black holes and neutron stars), and supermassive black holes. Some of the most powerful winds (termed Eddington winds) are expected to arise from systems where radiation pressure is sufficient to unbind material from the inner disc ($L\gtrsim L_{\rm Edd}$). These winds should be extremely fast and carry a large amount of kinetic power, which, when associated with supermassive black holes, would make them a prime contender for the feedback mechanism linking the growth of those black holes with their host galaxies. Here we show the XRISM Resolve spectrum of the Galactic neutron star X-ray binary, GX 13+1, which reveals one of the densest winds ever seen in absorption lines. This Compton-thick wind significantly attenuates the flux, making it appear faint, although it is intrinsically more luminous than usual ($L\gtrsim L_{\rm Edd}$). However, the wind is extremely slow, more consistent with the predictions of thermal-radiative winds launched by X-ray irradiation of the outer disc, than with the expected Eddington wind driven by radiation pressure from the inner disc. This puts new constraints on the origin of winds from bright accretion flows in binaries, but also highlights the very different origin required for the ultrafast ($v\sim 0.3c$) winds seen in recent Resolve observations of a supermassive black hole at similarly high Eddington ratio.

astro-ph.HE↗

The high-speed X-ray camera on AXIS: design and performance updates

AXIS, a Probe mission concept now in a Phase A study, will provide transformative studies of high-energy astrophysical phenomena thanks to its high-resolution X-ray spectral imaging. These capabilities are enabled by improvements to the mirror design that greatly increase the X-ray throughput per unit mass; and to the detector system, which operates more than an order of magnitude faster than heritage instruments while maintaining excellent spectral performance. We present updates to the design of the AXIS High-Speed Camera, a collaborative effort by MIT, Stanford University, the Pennsylvania State University, and the Southwest Research Institute. The camera employs large-format MIT Lincoln Laboratory CCDs that feature multiple high-speed, low-noise output amplifiers and an advanced single-layer polysilicon gate structure for fast, low-power clock transfers. A first lot of prototype CCID100 CCDs has completed fabrication and will soon begin X-ray performance testing. The CCDs are paired with high-speed, low-noise ASIC readout chips designed by Stanford to provide better performance than conventional discrete solutions at a fraction of the power consumption and footprint. Complementary Front-End Electronics employ state-of-the-art digital video waveform capture and advanced signal processing to further deliver low noise at high speed. The Back-End Electronics provide high-speed identification of candidate X-ray events and transient monitoring that relays fast alerts of changing sources to the community. We highlight updates to our parallel X-ray performance test facilities at MIT and Stanford, and review the current performance of the CCD and ASIC technology from testing of prototype devices. These measurements achieve excellent spectral response at the required readout rate, demonstrating that we will meet mission requirements and enable AXIS to achieve world-class science.

astro-ph.IM↗

Development and testing of integrated readout electronics for next generation SiSeRO (Single electron Sensitive Read Out) devices

The first generation of Single electron Sensitive Read Out (SiSeRO) amplifiers, employed as on-chip charge detectors for charge-coupled devices (CCDs) have demonstrated excellent noise and spectral performance: a responsivity of around 800 pA per electron, an equivalent noise charge (ENC) of 3.2 electrons root mean square (RMS), and a full width half maximum (FWHM) energy resolution of 130 eV at 5.9 keV for a readout speed of 625 Kpixel/s. Repetitive Non Destructive Readout (RNDR) has also been demonstrated with these devices, achieving an improved ENC performance of 0.36 electrons RMS after 200 RNDR cycles. In order to mature this technology further, Stanford University, in collaboration with MIT Kavli Institute and MIT Lincoln Laboratory, are developing new SiSeRO detectors with improved geometries that should enable greater responsivity and improved noise performance. These include CCD devices employing arrays of SiSeRO amplifiers to optimize high speed, low noise RNDR readout and a proof-of-concept SiSeRO active pixel sensor (APS). To read out these devices, our team has developed a compact, 8-channel, fast, low noise, low power application specific integrated circuit (ASIC) denoted the Multi-Channel Readout Chip (MCRC) that includes an experimental drain current readout mode intended for SiSeRO devices. In this paper, we present results from the first tests of SiSeRO CCD devices operating with MCRC readout, and our designs for next generation SiSeRO devices.

astro-ph.IM↗

Fast, low noise CCD systems for future strategic x-ray missions

Future strategic X-ray missions, such as the Advanced X-ray Imaging Satellite (AXIS) and those targeted by the Great Observatories Maturation Program (GOMaP), require fast, low-noise X-ray imaging spectrometers. To achieve the speed and noise capabilities required by such programs, the X-ray Astronomy and Observational Cosmology (XOC) Group at Stanford, in collaboration with the MIT Kavli Institute (MKI) and MIT Lincoln Laboratory (MIT-LL), is developing readout systems that leverage the high speed, low noise, and low power consumption of application-specific integrated circuit (ASIC) devices. Here, we report the energy resolution and noise performance achieved using MIT-LL AXIS prototype charge-coupled device (CCD) detectors in conjunction with Stanford-developed Multi-Channel Readout Chip (MCRC) ASICs. Additionally, we present a new sampling method for simultaneous optimization of the output gate (OG), reset gate (RG), and reset drain (RD) biases which, in combination with new integrated fast summing well (SW) and RG clock operation modes, enables the data rates required of future X-ray telescopes.

astro-ph.IM↗

Ground calibration plans for the AXIS high speed camera

The Advanced X-ray Imaging Satellite (AXIS), an astrophysics NASA probe mission currently in phase A, will provide high-throughput, high-spatial resolution X-ray imaging in the 0.3 to 10 keV band. We report on the notional ground calibration plan for the High Speed Camera on AXIS, which is being developed at the MIT Kavli Institute for Astrophysics and Space Research using state-of-the-art CCDs provided by MIT Lincoln Laboratory in combination with an integrated, high-speed ASIC readout chip from Stanford University. AXIS camera ground calibration draws on previous experience with X-ray CCD focal plans, in particular Chandra/ACIS and Suzaku/XIS, utilizing mono-energetic X-ray line sources to measure spectral resolution and quantum efficiency. Relative quantum efficiency of the CCDs will be measured against an sCMOS device, with known absolute calibration from synchrotron measurements. We walk through the envisioned CCD calibration pipeline and we discuss the observatory-level science and calibration requirements and how they inform the camera calibration.

astro-ph.IM↗

Design, development, and commissioning of a flexible test setup for the AXIS prototype detector

The Advanced X-ray Imaging Satellite (AXIS) is one of two candidate mission concepts selected for Phase-A study for the new NASA Astrophysics Probe Explorer (APEX) mission class, with a planned launch in 2032. The X-ray camera for AXIS is under joint development by the X-ray Astronomy and Observational Cosmology (XOC) Group at Stanford, the MIT Kavli Institute (MKI), and MIT Lincoln Laboratory (MIT-LL). To accelerate development efforts and meet the AXIS mission requirements, XOC has developed a twin beamline testing system, capable of providing the necessary performance, flexibility, and robustness. We present design details, simulations, and performance results for the newer of the two beamlines, constructed and optimized to test and characterize the first full-size MIT-LL AXIS prototype detectors, operating with the Stanford-developed Multi-Channel Readout Chip (MCRC) integrated readout electronics system. The XOC X-ray beamline design is forward-looking and flexible, with a modular structure adaptable to a wide range of detector technologies identified by the Great Observatories Maturation Program (GOMAP) that span the X-ray to near-infrared wavelengths.

astro-ph.IM↗

XRISM Pre-Pipeline and Singularity: Container-Based Data Processing for the X-Ray Imaging and Spectroscopy Mission and High-Performance Computing

The X-Ray Imaging and Spectroscopy Mission (XRISM) is the seventh Japanese X-ray observatory whose development and operation are in collaboration with universities and research institutes in Japan, the United States, and Europe, including JAXA, NASA, and ESA. The telemetry data downlinked from the satellite are reduced to scientific products using pre-pipeline (PPL) and pipeline (PL) software running on standard Linux virtual machines (VMs) for the JAXA and NASA sides, respectively. OBSIDs identified the observations, and we had 80 and 161 OBSIDs to be reprocessed at the end of the commissioning period and performance verification and calibration period, respectively. The combination of the containerized PPL utilizing Singularity of a container platform running on the JAXA's "TOKI-RURI" high-performance computing (HPC) system and working disk images formatted to ext3 accomplished a 33x speedup in PPL tasks over our regular VM. Herein, we briefly describe the data processing in XRISM and our porting strategies for PPL in the HPC environment.

astro-ph.IM↗

A XRISM Observation of the Archetypal Radio-Mode Feedback System Hydra-A: Measurements of Atmospheric Motion and Constraints on Turbulent Dissipation

We present XRISM Resolve observations centered on Hydra-A, a redshift z = 0.054 brightest cluster galaxy which hosts one of the largest and most powerful FR-I radio sources in the nearby Universe. We examine the effects of its high jet power on the velocity structure of the cluster's hot atmosphere. Hydra-A's central radio jets have inflated X-ray cavities with energies upward of $10^{61}$ erg. They reach altitudes of 225 kpc from the cluster center, well beyond the atmosphere's central cooling region. Resolve's $3\times3$ arcmin field-of-view covers $190\times190$ kpc, which encompasses most of the cooling volume. We find a one dimensional atmospheric velocity dispersion across the volume of $164\pm10$ km/s. The fraction in isotropic turbulence or unresolved bulk velocity is unknown. Assuming pure isotropic turbulence, the turbulent kinetic energy is $2.5 \%$ of the thermal energy radiated away over the cooling timescale, implying that kinetic energy must be supplied continually to offset cooling. While Hydra-A's radio jets are powerful enough to supply kinetic energy to the atmosphere at the observed level, turbulent dissipation alone would struggle to offset cooling throughout the cooling volume. The central galaxy's radial velocity is similar to the atmospheric velocity, with an offset of $-37 \pm 23$ km/s.

astro-ph.GA↗

Verification of the Timing System for the X-ray Imaging and Spectroscopy Mission in the GPS Unsynchronized Mode

We report the results from the ground and on-orbit verifications of the XRISM timing system when the satellite clock is not synchronized to the GPS time. In this case, the time is determined by a free-run quartz oscillator of the clock, whose frequency changes depending on its temperature. In the thermal vacuum test performed in 2022, we obtained the GPS unsynchronized mode data and the temperature-versus-clock frequency trend. Comparing the time values calculated from the data and the true GPS times when the data were obtained, we confirmed that the requirement (within a 350 $μ$s error in the absolute time, accounting for both the spacecraft bus system and the ground system) was satisfied in the temperature conditions of the thermal vacuum test. We also simulated the variation of the timing accuracy in the on-orbit temperature conditions using the Hitomi on-orbit temperature data and found that the error remained within the requirement over $\sim 3 \times 10^{5}$ s. The on-orbit tests were conducted in 2023 September and October as part of the bus system checkout. The temperature versus clock frequency trend remained unchanged from that obtained in the thermal vacuum test and the observed time drift was consistent with that expected from the trend.

astro-ph.IM↗

XRISM forecast for the Coma cluster: stormy, with a steep power spectrum

The XRISM Resolve microcalorimeter array measured the velocities of hot intracluster gas at two positions in the Coma galaxy cluster: 3'x3' squares at the center and at 6' (170 kpc) to the south. We find the line-of-sight velocity dispersions in those regions to be sigma_z=208+-12 km/s and 202+-24 km/s, respectively. The central value corresponds to a 3D Mach number of M=0.24+-0.015 and the ratio of the kinetic pressure of small-scale motions to thermal pressure in the intracluster plasma of only 3.1+-0.4%, at the lower end of predictions from cosmological simulations for merging clusters like Coma, and similar to that observed in the cool core of the relaxed cluster A2029. Meanwhile, the gas in both regions exhibits high line-of-sight velocity differences from the mean velocity of the cluster galaxies, Delta v_z=450+-15 km/s and 730+-30 km/s, respectively. A small contribution from an additional gas velocity component, consistent with the cluster optical mean, is detected along a sightline near the cluster center. The combination of the observed velocity dispersions and bulk velocities is not described by a Kolmogorov velocity power spectrum of steady-state turbulence; instead, the data imply a much steeper effective slope (i.e., relatively more power at larger linear scales). This may indicate either a very large dissipation scale resulting in the suppression of small-scale motions, or a transient dynamic state of the cluster, where large-scale gas flows generated by an ongoing merger have not yet cascaded down to small scales.

astro-ph.HE↗

Evidence for Charge Exchange Emission in Supernova Remnant N132D from XRISM/Resolve Observations

XRISM has delivered one of its first light observations on N132D, the X-ray brightest supernova remnant in the Large Magellanic Cloud. Utilizing 193 ks of high-resolution X-ray spectroscopy data, we conduct a comprehensive search for charge exchange emission. By incorporating a charge exchange model into our spectral analysis, we observe an improvement in the fits of two weak features at 2.41 keV and 2.63 keV. These features, with a combined significance of 99.6%, are consistent with transitions from highly ionized silicon ions in high Rydberg states, which are unique indicators of charge exchange. Our analysis constrains the charge exchange flux to no more than 4% of the total source flux within the 1.7-3.0 keV band, and places an upper limit on the charge exchange interaction velocity at 450 km/s. This result supports ongoing shock-cloud interactions within N132D and highlights the unique capabilities of XRISM to probe the complex physical processes at play.

astro-ph.HE↗