arXiv subjects

Gertjan Koster

Publications and source records attributed to Gertjan Koster.

At least 19 recordsLinked to original sources

arXiv2025

Interfacial Control of Orbital Occupancy and Spin State in LaCoO$_3$

Transition metal oxides exhibit a wide range of tunable electronic properties arising from the complex interplay of charge, spin, and lattice degrees of freedom, governed by their $d$ orbital configurations, making them particularly interesting for oxide electronics and (electro)catalysis. Perovskite oxide heterointerfaces offer a promising route to engineer these orbital states. In this work, we tune the Co $3d$ orbital occupancy in LaCoO$_3$ from a partial $d^7$ to a partial $d^5$ state through interfacial engineering with LaTiO$_3$, LaMnO$_3$, LaAlO$_3$ and LaNiO$_3$. Using X-ray absorption spectroscopy combined with charge transfer multiplet calculations, we identify differences in the Co valence and spin state for the series of oxide heterostructures. LaTiO$_3$ and LaMnO$_3$ interfaces result in interfacial charge transfer towards LaCoO$_3$, resulting in a partial $d^7$ orbital occupancy, while a LaNiO$_3$ interface results in a partial Co $d^5$ occupancy. Strikingly, a LaAlO$_3$ spacer layer between LaNiO$_3$ and LaCoO$_3$ results in a Co $d^6$ low spin state. These results indicate that the Co spin state, like the valence state, is governed by the interfacial environment. High-resolution scanning transmission electron microscopy imaging reveals a clear connection between strain and spin configuration, emphasizing the importance of structural control at oxide interfaces. Overall, this work demonstrates that interfacial engineering simultaneously governs orbital occupancy and spin state in correlated oxides, advancing spin-engineering strategies in correlated oxides and offering new insights for the rational design of functional oxide heterostructures.

cond-mat.mtrl-sci↗

arXiv2025

Anisotropic Strain Engineering in La0.7Sr0.3MnO3/LaFeO3 Superlattice: Structural Relaxation and Domain Formation

Anisotropic strain engineering in epitaxial oxide films provides new opportunities to control the antiferromagnetic and structural properties crucial for advancements of antiferromagnetic spintronics. Here we report on a (La0.7Sr0.3MnO3/LaFeO3)4 superlattice grown on (101)o DyScO3 substrate which imposes significant anisotropic in-plane strain. Reciprocal space mapping reveals selective strain relaxation along the tensile in-plane [010]o axis, while compression along the perpendicular in-plane [-101]o axis remains strained. Scanning precession electron diffraction and higher-order Laue zone analysis show that the relaxation is accommodated by structural domain formation in the LaFeO3 layers, initiating from the second bilayer and propagating out-of-plane. These domains minimise structural defects and correlate with the substrate step edges. X-ray magnetic dichroism measurements reveal bulk-like in-plane antiferromagnetic order with polydomain signature as previously reported. Our findings reveal the presence of structural domains coexisting with antiferromagnetic polydomain states, showing a strain-domain-magnetism relationship that provides insights for applications of strain engineering in spintronics applications.

cond-mat.mtrl-sci↗

arXiv2025

Ultrathin oxide freestanding membranes with large-scale continuity and structural perfection

Freestanding oxide membranes offer integration with advanced semiconductor platforms, unlocking opportunities for flexible electronics, silicon-based spintronics, neuromorphic computing, and high-performance energy technologies. Scalable fabrication of such membranes is essential for bridging fundamental discoveries in complex oxides with practical device deployment. However, the lateral dimensions of crack- and wrinkle-free membranes remain limited to millimeter scales, forming a critical bottleneck for large-area architectures. Overcoming this challenge demands strategies that preserve crystalline quality while suppressing defect transfer during release. Here, we demonstrate an approach based on a water-soluble sacrificial layer of super-tetragonal Sr4Al2O7, enabling the fabrication of ultrathin, crack-free, and wrinkle-free free-standing oxide membranes spanning centimeter-scale areas. This method is broadly applicable to a wide range of oxides and establishes a new pathway toward large-scale silicon integration and flexible oxide technologies. Nevertheless, dissolution of the sacrificial layer introduces oxygen vacancies into the SrRuO3 membranes, with diffusion depths reaching six unit cells, leading to anomalous "up-and-down" transport behavior. Although post-annealing can eliminate these vacancies, the required temperatures are incompatible with CMOS processes. Therefore, ultrathin freestanding membranes fabricated by water-assisted lift-off still face critical challenges for integration into miniaturized silicon-based oxide devices.

cond-mat.mtrl-sci↗

arXiv2025

Polarity and anti-distortive polarons in WO3 through epitaxial shear strain

Bestowing CMOS-compatible binary oxides with additional functionalities is a powerful strategy toward the realization of oxide electronics. Ideal candidates are thin films which display a strong sensitivity to strain, chemical doping or nanoscale confinement. Among these, crystalline tungsten trioxide WO3 exhibits exceptional structural flexibility, enabling a wide range of functionalities. Here, we reveal the emergence of a previously unreported polar phase in epitaxial WO3 thin films. We accomplish this by imposing epitaxial shear strain, which stabilizes a low-symmetry triclinic structure that persists up to large film thicknesses and elevated temperatures. At the atomic scale, a change in the oxygen octahedral tilt pattern facilitates this symmetry lowering into a polar phase, which manifests as a periodic in-plane polarized stripe domain configuration with needle-like bifurcations at the microscale. The stripe domain walls further exhibit a strongly enhanced electrical conductivity in conjunction with a pronounced reduction of a distortive structural mode, providing the first experimental evidence for the formation of anti-distortive polarons recently predicted in WO3.

cond-mat.mtrl-sci↗

arXiv2024

Observation of Mermin-Wagner behavior in LaFeO$_3$/SrTiO$_3$ superlattices

Two-dimensional magnetic materials attract a lot of attention since they potentially exhibit new magnetic properties due to, e.g., strongly enhanced spin fluctuations. However, the suppression of the long-range magnetic order in two dimensions due to long-wavelength spin fluctuations, as suggested by the Mermin-Wagner theorem, has been questioned for finite-size laboratory samples. Here we study the magnetic properties of a dimensional crossover in superlattices composed of the antiferromagnetic LaFeO$_3$ and SrTiO$_3$ that, thanks to their large lateral size, allowed examination using a sensitive magnetic probe - muon spin rotation spectroscopy. We show that the iron electronic moments in superlattices with 3 and 2 monolayers of LaFeO$_3$ exhibit a static antiferromagnetic order. In contrast, in the superlattices with single LaFeO$_3$ monolayer, the moments do not order and fluctuate to the lowest measured temperature as expected from the Mermin-Wagner theorem. Our work shows how dimensionality can be used to tune the magnetic properties of ultrathin films.

cond-mat.str-el↗

arXiv2023

A complementary experimental study of epitaxial La0.67Sr0.33MnO3 to identify morphological and chemical disorder

Gaining insight into the characteristics of epitaxial complex oxide films is essential to control the behavior of devices and catalytic processes. It is known that substrate induced strain, doping, and layer growth can affect the electronic and magnetic properties of the film's bulk. In this study, we demonstrate a clear distinction between the bulk and surface of thin films of La0.67Sr0.33MnO3 in terms of chemical composition, electronic disorder, and surface morphology. We employed a combined experimental approach of X-ray based characterization methods and scanning probe microscopy. X-ray diffraction and resonant X-ray reflectivity revealed surface non-stochiometry in the strontium and lanthanum, as well as an accumulation of oxygen vacancies. Scanning tunneling microscopy showed a staggered growth surface morphology accompanied by an electronic phase separation (EPS) related to this non-stochiometry. The EPS is likely responsible for the temperature-dependent resistivity transition and is a cause of a proposed mixed-phase ferromagnetic and paramagnetic state near room temperature in these thin films.

cond-mat.mtrl-sci↗

arXiv2023

Beyond domain alignment: Revealing the effect of intrinsic magnetic order on electrochemical water splitting

To reach a long term viable green hydrogen economy, rational design of active oxygen evolution reaction (OER) catalysts is critical. An important hurdle in this reaction originates from the fact that the reactants are singlet molecules, whereas the oxygen molecule has a triplet ground state with parallel spin alignment, implying that magnetic order in the catalyst is essential. Accordingly, multiple experimentalists reported a positive effect of external magnetic fields on OER activity of ferromagnetic catalysts. However, it remains a challenge to investigate the influence of the intrinsic magnetic order on catalytic activity. Here, we tuned the intrinsic magnetic order of epitaxial La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ thin film model catalysts from ferro- to paramagnetic by changing the temperature in-situ during water electrolysis. Using this strategy, we show that ferromagnetic ordering below the Curie temperature enhances OER activity. Moreover, we show a slight current density enhancement upon application of an external magnetic field and find that the dependence of magnetic field direction correlates with the magnetic anisotropy in the catalyst film. Our work thus suggests that both the intrinsic magnetic order in La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ films and magnetic domain alignment increase their catalytic activity. We observe no long-range magnetic order at the catalytic surface, implying that the OER enhancement is connected to the magnetic order of the bulk catalyst. Combining the effects found with existing literature, we propose a unifying picture for the spin-polarized enhancement in magnetic oxide catalysts.

cond-mat.mtrl-sci↗

arXiv2022

High-strain-induced local modification of the electronic properties of VO$_2$ thin films

Vanadium dioxide (VO2) is a popular candidate for electronic and optical switching applications due to its well-known semiconductor-metal transition. Its study is notoriously challenging due to the interplay of long and short range elastic distortions, as well as the symmetry change, and the electronic structure changes. The inherent coupling of lattice and electronic degrees of freedom opens the avenue towards mechanical actuation of single domains. In this work, we show that we can manipulate and monitor the reversible semiconductor-to-metal transition of VO2 while applying a controlled amount of mechanical pressure by a nanosized metallic probe using an atomic force microscope. At a critical pressure, we can reversibly actuate the phase transition with a large modulation of the conductivity. Direct tunneling through the VO2-metal contact is observed as the main charge carrier injection mechanism before and after the phase transition of VO2. The tunneling barrier is formed by a very thin but persistently insulating surfacelayer of the VO2. The necessary pressure to induce the transition decreases with temperature. In addition, we measured the phase coexistence line in a hitherto unexplored regime. Our study provides valuable information on pressure-induced electronic modifications of the VO2 properties, as well as on nanoscale metal-oxide contacts, which can help in the future design of oxide electronics.

cond-mat.mtrl-sci↗

arXiv2020

Single-source, solvent-free, room temperature deposition of black $γ$-CsSnI$_3$ films

The presence of a non-optically active polymorph (yellow-phase) competing with the optically active polymorph (black $γ$-phase) at room temperature in CsSnI3 and the susceptibility of Sn to oxidation, represent two of the biggest obstacles for the exploitation of CsSnI3 in optoelectronic devices. Here room-temperature single-source in vacuum deposition of smooth black $γ$ - CsSnI3 thin films is reported. This has been done by fabricating a solid target by completely solvent-free mixing of CsI and SnI2 powders and isostatic pressing. By controlled laser ablation of the solid target on an arbitrary substrate at room temperature, the formation of CsSnI3 thin films with optimal optical properties is demonstrated. The films present a band gap of 1.32 eV, a sharp absorption edge and near-infrared photoluminescence emission. These properties and X-ray diffraction of the thin films confirmed the formation of the orthorhombic (B-$γ$) perovskite phase. The thermal stability of the phase was ensured by applying in situ an Al2O$_3$ capping layer. This work demonstrates the potential of pulsed laser deposition as a volatility-insensitive single-source growth technique of halide perovskites and represents a critical step forward in the development and future scalability of inorganic lead-free halide perovskites.

physics.app-ph↗

arXiv2020

Atomic Layer Deposition of SiO$_2$-GeO$_2$ multilayers

Despite its interest for CMOS applications, Atomic Layer Deposition (ALD) of GeO$_{2}$ thin films, by itself or in combination with SiO$_{2}$, has not been widely investigated yet. Here we report the ALD growth of SiO$_{2}$/GeO$_{2}$ multilayers on Silicon substrates using a so far unreported Ge precursor. The characterization of multilayers with various periodicities reveals successful layer-by-layer growth with electron density contrast and absence of chemical intermixing, down to a periodicity of 2 atomic layers.

cond-mat.mtrl-sci↗

arXiv2019

Stabilization of phase-pure rhombohedral HfZrO4 in Pulsed Laser Deposited thin films

Controlling the crystalline structure of Hafnium Zirconate and its epitaxial relationship to a semiconducting electrode has a high technological interest, as ferroelectric materials are key ingredients for emerging electronic devices. Using Pulsed Laser Deposition, a phase pure, ultra-thin film of HfZrO4 is grown epitaxially on a GaN (0001) / Si (111) template. Since standard microscopy techniques do not allow to determine with certitude the crystalline structure of the film due to the weak scattering of oxygen, differentiated differential phase contrast (DPC) Scanning Transmission Electron Microscopy is used to allow the direct imaging of oxygen columns in the film. Combined with X-Rays diffraction analysis, the polar nature and rhombohedral R3 symmetry of the film are demonstrated.

cond-mat.mtrl-sci↗

arXiv2019

Growing a LaAlO3/SrTiO3 heterostructure on Ca2Nb3O10 nanosheets

The two-dimensional electron liquid which forms between the band insulators LaAlO3 (LAO) and SrTiO3 (STO) is a promising component for oxide electronics, but the requirement of using single crystal SrTiO3 substrates for the growth limits its applications in terms of device fabrication. It is therefore important to find ways to deposit these materials on other substrates, preferably Si, or Si-based, in order to facilitate integration with existing technology. Interesting candidates are micron-sized nanosheets of Ca2Nb3O10 which can be used as seed layers for perovskite materials on any substrate. We have used low-energy electron microscopy (LEEM) with in-situ pulsed laser deposition to study the subsequent growth of STO and LAO on such flakes which were deposited on Si. We can follow the morphology and crystallinity of the layers during growth, as well as fingerprint their electronic properties with angle resolved reflected electron spectroscopy. We find that STO layers, deposited on the nanosheets, can be made crystalline and flat; that LAO can be grown in a layer-by-layer fashion; and that the full heterostructure shows the signature of the formation of a conducting interface.

cond-mat.mtrl-sci↗

arXiv2019

Full control of Co valence in isopolar LaCoO3 / LaTiO3 perovskite heterostructures via interfacial engineering

We report charge-transfer up to a single electron per interfacial unit cell across non-polar heterointerfaces from the Mott insulator LaTiO3 to the charge transfer insulator LaCoO3. In high-quality bi- and tri-layer systems grown using pulsed laser deposition, soft X-ray absorption, dichroism and STEM-EELS are used to probe the cobalt 3d-electron count and provide an element-specific investigation of the magnetic properties. The experiments prove a deterministically-tunable charge transfer process acting in the LaCoO3 within three unit cells of the heterointerface, able to generate full conversion to 3d7 divalent Co, which displays a paramagnetic ground state. The number of LaTiO3 / LaCoO3 interfaces, the thickness of an additional "break" layer between the LaTiO3 and LaCoO3, and the LaCoO3 film thickness itself in tri-layers provide a trio of sensitive control knobs for the charge transfer process, illustrating the efficacy of O2p-band alignment as a guiding principle for property design in complex oxide heterointerfaces.

cond-mat.mtrl-sci↗

arXiv2019

Spin chirality fluctuation in two-dimensional ferromagnets with perpendicular anisotropy

Non-coplanar spin textures with scalar spin chirality can generate effective magnetic field that deflects the motion of charge carriers, resulting in topological Hall effect (THE), a powerful probe of the ground state and low-energy excitations of correlated systems. However, spin chirality fluctuation in two-dimensional ferromagnets with perpendicular anisotropy has not been considered in prior studies. Herein, we report direct evidence of universal spin chirality fluctuation by probing the THE above the transition temperatures in two different ferromagnetic ultra-thin films, SrRuO$_3$ and V doped Sb$_2$Te$_3$. The temperature, magnetic field, thickness, and carrier type dependences of the THE signal, along with our Monte-Carlo simulations, unambiguously demonstrate that the spin chirality fluctuation is a universal phenomenon in two-dimensional Ising ferromagnets. Our discovery opens a new paradigm of exploring the spin chirality with topological Hall transport in two-dimensional magnets and beyond

cond-mat.mtrl-sci↗

arXiv2019

Stabilization of the perovskite phase in the Y-Bi-O system by using a BaBiO$_{3}$ buffer layer

A topological insulating phase has theoretically been predicted for the thermodynamically unstable perovskite phase of YBiO$_{3}$. Here, it is shown that the crystal structure of the Y-Bi-O system can be controlled by using a BaBiO$_{3}$ buffer layer. The BaBiO$_{3}$ film overcomes the large lattice mismatch of 12% with the SrTiO$_{3}$ substrate by forming a rocksalt structure in between the two perovskite structures. Depositing an YBiO$_{3}$ film directly on a SrTiO$_{3}$ substrate gives a fluorite structure. However, when the Y-Bi-O system is deposited on top of the buffer layer with the correct crystal phase and comparable lattice constant, a single oriented perovskite structure with the expected lattice constants is observed.

cond-mat.mtrl-sci↗

arXiv2019

Tailoring Vanadium Dioxide Film Orientation using Nanosheets: A Combined Microscopy, Diffraction, Transport and Soft X-ray in Transmission Study

VO2 is a much-discussed material for oxide electronics and neuromorphic computing applications. Here, heteroepitaxy of vanadium dioxide (VO2) was realized on top of oxide nanosheets that cover either the amorphous silicon dioxide surfaces of Si substrates or X-ray transparent silicon nitride membranes. The out-of-plane orientation of the VO2 thin films was controlled at will between (011)M1/(110)R and (-402)M1/(002)R by coating the bulk substrates with Ti0.87O2 and NbWO6 nanosheets, respectively, prior to VO2 growth. Temperature dependent X-ray diffraction and automated crystal orientation mapping in microprobe TEM mode (ACOM-TEM) characterized the high phase purity, the crystallographic and orientational properties of the VO2 films. Transport measurements and soft X-ray absorption in transmission are used to probe the VO2 metal-insulator transition, showing results of a quality equal to those from epitaxial films on bulk single-crystal substrates. Successful local manipulation of two different VO2 orientations on a single substrate is demonstrated using VO2 grown on lithographically-patterned lines of Ti0.87O2 and NbWO6 nanosheets investigated by electron backscatter diffraction. Finally, the excellent suitability of these nanosheet-templated VO2 films for advanced lensless imaging of the metal-insulator transition using coherent soft X-rays is discussed.

cond-mat.mtrl-sci↗

arXiv2017

Quantum Anomalous Hall State in Ferromagnetic SrRuO$_3$ (111) Bilayers

SrRuO$_3$ heterostructures grown in the (111) direction are a rare example of thin film ferromagnets. By means of density functional theory plus dynamical mean field theory we show that the half-metallic ferromagnetic state with an ordered magnetic moment of 2$μ_{B}$/Ru survives the ultimate dimensional confinement down to a bilayer, even at elevated temperatures of 500$\,$K. In the minority channel, the spin-orbit coupling opens a gap at the linear band crossing corresponding to $\frac34$ filling of the $t_{2g}$ shell. We demonstrate that the respective state is Haldane's quantum anomalous Hall state with Chern number $C$=1, without an external magnetic field or magnetic impurities.

cond-mat.str-el↗

arXiv2017

Thickness dependent properties in oxide heterostructures driven by structurally induced metal-oxygen hybridization variations

Thickness driven electronic phase transitions are broadly observed in different types of functional perovskite heterostructures. However, uncertainty remains whether these effects are solely due to spatial confinement, broken symmetry or rather to a change of structure with varying film thickness. Here, we present direct evidence for the relaxation of oxygen 2p and Mn 3d orbital (p-d) hybridization coupled to the layer dependent octahedral tilts within a La2/3Sr1/3MnO3 film driven by interfacial octahedral coupling. An enhanced Curie temperature is achieved by reducing the octahedral tilting via interface structure engineering. Atomically resolved lattice, electronic and magnetic structures together with X-ray absorption spectroscopy demonstrate the central role of thickness dependent p-d hybridization in the widely observed dimensionality effects present in correlated oxide heterostructures.

cond-mat.mtrl-sci↗