arXiv subjects

Guangji Chen

Publications and source records attributed to Guangji Chen.

At least 19 recordsLinked to original sources

arXiv2026

A Covert Precision Satellite Communication Framework Assisted by Cooperative IRSs

Satellite communication (SatCom), as an effective complement to terrestrial networks, has attracted considerable attention from both academia and industry owing to its wide coverage and high flexibility. However, the inherent openness of satellite links renders them highly vulnerable to eavesdropping, thereby posing significant security challenges. In this paper, we propose a satellite covert precision wireless communication (CPWC) system, where multiple intelligent reflecting surfaces (IRSs) cooperate to assist satellite transmissions, ensuring that confidential information is delivered to legitimate users while remaining undetectable to wardens. To further enhance covertness, an orthogonal frequency division multiplexing (OFDM)-based random subcarrier selection (RSCS) method is developed to concentrate the signal energy at the intended receiver. Under a practical satellite-terrestrial channel model, we derive closed-form covertness constraints for the CPWC system based on relative entropy and detection error probability. Under the relative-entropy constraint and the satellite power constraint, we maximize the covert rate by an alternating-optimization (AO) based semidefinite relaxation (SDR) iterative algorithm and obtain a high-quality feasible solution. Using this solution as a warm start, we further impose the detection-error-probability constraint and refine the beamformer through a sequential quadratic programming (SQP) based algorithm. Numerical results demonstrate the effectiveness of the proposed CPWC system, where the detection-error-probability-based scheme outperforms the second-order cone programming (SOCP) benchmark, the random-phase-shift design, the one-bit IRS quantized scheme, and the SDR baseline without precise communication (PC) in terms of covert rate.

eess.SP↗

arXiv2026

Tensor-Based Dynamic Channel Estimation for mmWave Movable Antenna MIMO Systems

This paper investigates the dynamic channel estimation algorithm in mmWave movable antenna (MA) multiple-input multiple-output (MIMO) systems. To achieve highly accurate channel estimation, we propose a tensor decomposition-based channel estimation algorithm. First, by leveraging the path response model and utilizing the intrinsic sparsity of mmWave channels, the channel corresponding to MA pairs at the base station and mobile station is transformed into a superposition of channels from sparse paths. Next, the received signal is constructed as a fourth-order tensor to fully capture the high-dimensional structural information of the MA MIMO channel. Then, two tensor decomposition schemes are adopted to extract the factor matrices, and our analysis reveals that the uniqueness of the decomposition can be guaranteed in our model. Subsequently, the propagation loss, frequency offset, angle of arrival/departure, and time delay are obtained based on these factor matrices and the channel matrix can be rebuilt. Additionally, Cram\'er-Rao bound (CRB) is also derived as a performance evaluation standard, proving that the proposed algorithm achieves a higher estimation accuracy and nearly approaches this minimum bound. Moreover, normalized mean square error (NMSE) is selected as the evaluation metrics for estimation accuracy. Finally, simulation results reveal a notable reduction in the estimation error of the proposed algorithm when compared to the baseline algorithms, confirming its estimation advantage.

eess.SP↗

arXiv2026

Active Sensing-assisted UAV Communications with Jittering: Framework and Performance Analysis

Providing reliable communication for unmanned aerial vehicles (UAVs) via existing cellular networks is crucial for enabling the rapid growth of the low-altitude economy. However, UAV jittering significantly degrades communication quality due to induced beam misalignment. Inspired by recent advances in integrated sensing and communication, we propose a novel two-stage active sensing-assisted communication framework tailored for ground-to-UAV links with jittering. Specifically, two schemes are conceived to leverage sensing for enhancing communication performance, namely the communication-oriented scheme and the sensing-oriented scheme. For the sensing-oriented scheme, deterministic signals are employed in the first stage to facilitate angle-of-arrival (AoA) acquisition at the UAV side, followed by pure communication service in the second stage by using the estimated AoA. In contrast, the communication-oriented scheme employs Gaussian information-bearing signals throughout both stages, with AoA estimation relying on Gaussian random signals. For both schemes, we provide maximum likelihood estimators for AoA, along with analytical results characterizing the Cram\'er-Rao bound. To capture the performance limit, closed-form expressions for the achievable rates of the two schemes are derived, unveiling a fundamental tradeoff between sensing and communication quality across the two stages by tuning the time allocated to the first stage. The optimal time allocation that maximizes the overall rate is obtained in semi-closed-form. Based on these results, we unveil a sufficient condition under which the communication-oriented scheme outperforms the sensing-oriented scheme, which admits an interesting threshold-based structure. Asymptotic analysis demonstrates that the performance loss of the proposed schemes relative to the jitter-free upper bound approaches zero in the high transmit power regime.

cs.IT↗

arXiv2026

Engineering Favorable Propagation: Near-Field IRS Deployment for Spatial Multiplexing

In intelligent reflecting surface IRS assisted multiple input multiple output MIMO systems, a strong line of sight LoS link is required to compensate for the severe cascaded path loss. However, such a link renders the effective channel highly rank deficient and fundamentally limits spatial multiplexing. To overcome this limitation, this paper leverages the large aperture of sparse arrays to harness near field spherical wavefronts, and establishes a deterministic deployment criterion that strategically positions the IRS in the near field of a base station BS. This placement exploits the spherical wavefronts of the BS IRS link to engineer decorrelated channels, thereby fundamentally overcoming the rank deficiency issue in far field cascaded channels. Based on a physical channel model for the sparse BS array and the IRS, we characterize the rank properties and inter user correlation of the cascaded BS IRS user channel. We further derive a closed form favorable propagation metric that reveals how the sparse array geometry and the IRS position can be tuned to reduce inter user channel correlation. The resulting geometry driven deployment rule provides a simple guideline for creating a favorable propagation environment with enhanced effective degrees of freedom. The favorable channel statistics induced by our deployment criterion enable a low complexity maximum ratio transmission MRT precoding scheme. This serves as the foundation for an efficient algorithm that jointly optimizes the IRS phase shifts and power allocation based solely on long term statistical channel state information CSI. Simulation results validate the effectiveness of our deployment criterion and demonstrate that our optimization framework achieves significant performance gains over benchmark schemes.

cs.IT↗

arXiv2025

Cooperative Rotatable IRSs for Wireless Communications: Joint Beamforming and Orientation Optimization

Rotatable intelligent reflecting surfaces (IRSs) introduce a new degree of freedom (DoF) for shaping wireless propagation by adaptively adjusting the orientation of IRSs. This paper considers an angle-dependent reflection model in a wireless communication system aided by two rotatable IRSs. Specifically, we study the joint design of the base station transmit beamforming, as well as the cooperative passive beamforming and orientation of the two IRSs, to maximize the received signal-to-noise ratio (SNR). Under the light-of-sight (LoS) channels, we first develop a particle swarm optimization (PSO) based method to determine the IRS rotation and derive an optimal rotation in a closed-form expression for a two-dimensional IRS deployment. Then, we extend the design to the general Rician fading channels by proposing an efficient alternating optimization and PSO (AO-PSO) algorithm. Numerical results validate the substantial gains achieved by the IRS rotation over fixed-IRS schemes and also demonstrate the superior performance of the double rotatable IRSs over a single rotatable IRS given a sufficient total number of IRS elements.

eess.SP↗

arXiv2025

Semi-Passive IRS Enabled Sensing with Group Movable Sensors

The performance of the sensing system is limited by the signal attenuation and the number of receiving components. In this letter, we investigate the sensor position selection in a semi-passive intelligent reflecting surface (IRS) enabled non-line-of-sight (NLoS) sensing system. The IRS consists of passive elements and active sensors, where the sensors can receive and process the echo signal for direction-of-arrival (DoA) estimation. Motivated by the movable antenna array and fluid antenna system, we consider the case where the sensors are integrated into a group for movement and derive the corresponding Cramer-Rao bound (CRB). Then, the optimal solution for the positions of the movable sensors (MSs) to the CRB minimization problem is derived in closed form. Moreover, we characterize the relationship between the CRB and system parameters. Theoretical analysis and numerical results are provided to demonstrate the superiority of the proposed MS scheme over the fixed-position (FP) scheme.

eess.SP↗

arXiv2025

Rotatable IRS Aided Wireless Communication

Rotatable intelligent reflecting surface (IRS) introduces a new spatial degree of freedom (DoF) by dynamically adjusting orientations without the need of changing its elements' positions in real time. To unleash the full potential of rotatable IRSs for wireless communications, this paper investigates the joint optimization of IRS rotation angles to maximize the minimum expected signal-to-noise ratio (SNR) over all locations within a given target area. We first propose an angle-dependent channel model that accurately characterizes the reception and reflection of each IRS element. Different from the conventional cosine-law assumption, the proposed model captures the practical electromagnetic characteristics of the IRS, including the effective reception area and reflection efficiency. For the single target location case, a particle swarm optimization (PSO)-based algorithm is developed to solve the SNR maximization problem, and a closed-form expression for a near-optimal solution is derived to provide useful insights. For the general area coverage enhancement case, the optimal rotation is obtained through a two-loop PSO-based iterative algorithm with null-point detection. In this algorithm, the outer loop updates the global rotation angles to maximize the minimum SNR over the target area, whereas the inner loop evaluates the SNR distribution within the area to identify the location corresponding to the minimum SNR through null-point detection. Numerical results demonstrate significant SNR improvement achieved by the proposed rotatable IRS design over various benchmark schemes under different system setups.

eess.SP↗

arXiv2025

Rotatable Antenna Meets UAV: Towards Dual-Level Channel Reconfiguration Paradigm for ISAC

Integrated sensing and communication (ISAC) is viewed as a key enabler for future wireless networks by sharing the hardware and wireless resources between the functionalities of sensing and communication (S&C). Due to the shared wireless resources for both S&C, it is challenging to achieve a critical trade-off between these two integrated functionalities. To address this issue, this paper proposes a novel dual-level channel reconfiguration framework for ISAC by deploying rotatable antennas at an unmanned aerial vehicle (UAV), where both the large-scale path loss and the correlation of S&C channels can be proactively controlled, thereby allowing a flexible trade-off between S&C performance. To characterize the S&C tradeoff, we aim to maximize the communication rate by jointly optimizing the RA rotation, the transmit beamforming, and the UAV trajectory, subject to the given requirement of sensing performance. For the typical scenario of static UAV deployment, we introduce the concept of subspace correlation coefficient to derive closed-form solutions for the optimal RA rotation, transmit beamforming, and UAV hovering location. For the scenario of a fully mobile UAV, we prove that the optimal trajectory of a UAV follows a hover-fly-hover (HFH) structure, thereby obtaining its global optimal solution. Simulation results show that the proposed design significantly improves the achievable S&C trade-off region compared to benchmark schemes.

cs.IT↗

arXiv2025

Active IRS Assisted Joint Uplink and Downlink Communications

In this paper, we investigate an intelligent reflecting surface (IRS) aided wireless communication system, where active IRSs (AIRSs) are deployed to assist communication between a base station (BS) and users of both the uplink (UL) and downlink (DL). We aim to maximize the weighted sum rate (WSR) of UL and DL communications through joint optimization of BS, AIRS beamforming, and AIRS element allocation. First, we study three deployment schemes, namely distributed AIRSs, BS-side AIRS, and user-side AIRS. For distributed AIRSs, both optimal and near-optimal solutions are derived in closed form. To draw useful insights, we analytically compare the deployment schemes in terms of the rate performance under the single-user setup. For the multi-user case, we consider two beamforming setups at the distributed AIRSs to balance performance and complexity tradeoffs. Regarding the user-adaptive AIRS beamforming, different AIRS beamforming vectors are adopted for each user; while for the static AIRS beamforming, all users share the same beamforming vectors, with identical phase shifts but different amplitudes for UL and DL. With the user-adaptive AIRS beamforming, we focus on the optimization of element allocation for rate maximization. With static AIRS beamforming, we solve the rate maximization problem by optimizing the BS transmit/receive beamformers, user beamforming, and AIRS beamforming. Despite its non-convexity, we develop an efficient alternating optimization (AO) based algorithm that solves each sub-problem optimally. Numerical results validate the practical advantages of distributed AIRSs compared to passive IRS (PIRS), BS-side AIRS, and user-side AIRS, and highlight the benefits of dynamic IRS beamforming.

eess.SP↗

arXiv2025

Wireless Powered MEC Systems via Discrete Pinching Antennas: TDMA versus NOMA

Pinching antennas (PAs), a new type of reconfigurable and flexible antenna structures, have recently attracted significant research interest due to their ability to create line-of-sight links and mitigate large-scale path loss. Owing to their potential benefits, integrating PAs into wireless powered mobile edge computing (MEC) systems is regarded as a viable solution to enhance both energy transfer and task offloading efficiency. Unlike prior studies that assume ideal continuous PA placement along waveguides, this paper investigates a practical discrete PA-assisted wireless powered MEC framework, where devices first harvest energy from PA-emitted radio-frequency signals and then adopt a partial offloading mode, allocating part of the harvested energy to local computing and the remainder to uplink offloading. The uplink phase considers both the time-division multiple access (TDMA) and non-orthogonal multiple access (NOMA), each examined under three levels of PA activation flexibility. For each configuration, we formulate a joint optimization problem to maximize the total computational bits and conduct a theoretical performance comparison between the TDMA and NOMA schemes. To address the resulting mixed-integer nonlinear problems, we develop a two-layer algorithm that combines closed-form solutions based on Karush-Kuhn-Tucker (KKT) conditions with a cross-entropy-based learning method. Numerical results validate the superiority of the proposed design in terms of the harvested energy and computation performance, revealing that TDMA and NOMA achieve comparable performance under coarser PA activation levels, whereas finer activation granularity enables TDMA to achieve superior computation performance over NOMA.

eess.SP↗

arXiv2025

Sum Capacity Characterization of Pinching Antennas-assisted Multiple Access Channels

Pinching antenna system (PASS) has recently shown its promising ability to flexibly reconfigure wireless channels via dynamically adjusting the positions of pinching antennas over a dielectric waveguide, termed as pinching beamforming. This paper studies the fundamental limit of the sum rate for a PASS-assisted multiple access channel, where multiple users transmit individual messages to a base station under the average power constraint. To this end, a dynamic pinching beamforming setup is conceived, where multiple pinching beamforming vectors are employed in a transmission period and the capacity-achieving non-orthogonal multiple access (NOMA) based scheme is considered. For the ideal case with an asymptotically large number of pinching beamforming vectors, the optimal transmission scheme is unveiled to carry out alternating transmission among each user whose channel power gain is maximized with the tailored pinching beamforming. This implies that NOMA is not needed for achieving the sum capacity and the required optimal number of pinching beamforming vectors is equal to the number of users. With this insight, the corresponding sum rate is derived in closed-form expression, which serves as the upper bound of the sum rate. Inspired by this result, a lower bound of the sum rate under an arbitrarily finite number of pinching beamforming vectors is obtained. Numerical results validate our theoretical findings and also illustrate the practical significance of using dynamic pinching beamforming to improve the sum rate.

cs.IT↗

arXiv2025

Multi-IRS Aided ISAC System: Multi-Path Exploitation Versus Reduction

This paper investigates a multi-intelligent reflecting surface (IRS) aided integrated sensing and communication (ISAC) system, where multiple IRSs are strategically deployed not only to assist the communication from a multi-antenna base station (BS) to a multi-antenna communication user (CU), but also enable the sensing service for a point target in the non-line-of-sight (NLoS) region of the BS. First, we propose a hybrid multi-IRS architecture, which consists of several passive IRSs and one semi-passive IRS equipped with both active sensors and reflecting elements. To be specific, the active sensors are exploited to receive the echo signals for estimating the target's angle information, and the multiple reflecting paths provided by multi-IRS are employed to improve the degree of freedoms (DoFs) of communication. Under the given budget on the number of total IRSs elements, we theoretically show that increasing the number of deployed IRSs is beneficial for improving DoFs of spatial multiplexing for communication while increasing the Cramer-Rao bound (CRB) of target estimation, which unveils a fundamental tradeoff between the sensing and communication performance. To characterize the rate-CRB tradeoff, we study a rate maximization problem, by optimizing the BS transmit covariance matrix, IRSs phase-shifts, and the number of deployed IRSs, subject to a maximum CRB constraint. Analytical results reveal that the communication-oriented design becomes optimal when the total number of IRSs elements exceeds a certain threshold, wherein the relationships of the rate and CRB with the number of IRS elements/sensors, transmit power, and the number of deployed IRSs are theoretically derived and demystified. Simulation results validate our theoretical findings and also demonstrate the superiority of our proposed designs over the benchmark schemes.

cs.IT↗

arXiv2025

Integrating Movable Antennas and Intelligent Reflecting Surfaces for Coverage Enhancement

This paper investigates an intelligent reflecting surface (IRS)-aided movable antenna (MA) system, where multiple IRSs cooperate with a multi-MA base station to extend wireless coverage to multiple target areas. The objective is to maximize the worst-case signal-to-noise ratio (SNR) across all locations within these areas through joint optimization of MA positions, IRS phase shifts, and transmit beamforming. To achieve this while balancing the performance-cost trade-off, we propose three coverage-enhancement schemes: the area-adaptive MA-IRS scheme, where both MA positions and IRS phase shifts are adaptively adjusted for each target area; the area-adaptive MA-staIRS scheme, where only MA positions are adjusted, while IRS phase shifts remain unchanged after initial configuration (with staIRS denoting static IRSs); and the shared MA-staIRS scheme, where a common MA placement and static IRS configuration are applied across all areas. These schemes lead to challenging non-convex optimization problems with implicit objectives, which are difficult to solve optimally. To address these problems, we propose a general algorithmic framework that can solve each problem efficiently albeit suboptimally. Simulation results demonstrate that: 1) the proposed MA-based schemes consistently outperform their fixed-position antenna (FPA)-based counterparts under both area-adaptive and static IRS configurations, with the area-adaptive MA-IRS scheme achieving the best worst-case SNR; 2) as transmit antennas are typically far fewer than IRS elements, the area-adaptive MA-staIRS scheme may underperform the baseline FPA scheme with area-adaptive IRSs in worst-case SNR, but a modest increase in antenna number can reverse this; 3) under a fixed total cost, the optimal MA-to-IRS-element ratio for worst-case SNR maximization is empirically found to be proportional to the reciprocal of their unit cost ratio.

eess.SP↗

arXiv2025

Conditional Diffusion Model-Driven Generative Channels for Double RIS-Aided Wireless Systems

With the development of the upcoming sixth-generation networks (6G), reconfigurable intelligent surfaces (RISs) have gained significant attention due to its ability of reconfiguring wireless channels via smart reflections. However, traditional channel state information (CSI) acquisition techniques for double-RIS systems face challenges (e.g., high pilot overhead or multipath interference). This paper proposes a new channel generation method in double-RIS communication systems based on the tool of conditional diffusion model (CDM). The CDM is trained on synthetic channel data to capture channel characteristics. It addresses the limitations of traditional CSI generation methods, such as insufficient model understanding capability and poor environmental adaptability. We provide a detailed analysis of the diffusion process for channel generation, and it is validated through simulations. The simulation results demonstrate that the proposed CDM based method outperforms traditional channel acquisition methods in terms of normalized mean squared error (NMSE). This method offers a new paradigm for channel acquisition in double-RIS systems, which is expected to improve the quality of channel acquisition with low pilot overhead.

eess.SP↗

arXiv2025

Computation Capacity Maximization for Pinching Antennas-Assisted Wireless Powered MEC Systems

In this paper,we investigate a novel wireless powered mobile edge computing (MEC) system assisted by pinching antennas (PAs), where devices first harvest energy from a base station and then offload computation-intensive tasks to an MEC server. As an emerging technology, PAs utilize long dielectric waveguides embedded with multiple localized dielectric particles, which can be spatially configured through a pinching mechanism to effectively reduce large-scale propagation loss. This capability facilitates both efficient downlink energy transfer and uplink task offloading. To fully exploit these advantages, we adopt a non-orthogonal multiple access (NOMA) framework and formulate a joint optimization problem to maximize the system's computational capacity by jointly optimizing device transmit power, time allocation, PA positions in both uplink and downlink, and radiation control. To address the resulting non-convexity caused by variable coupling, we develop an alternating optimization algorithm that integrates particle swarm optimization (PSO) with successive convex approximation. Simulation results demonstrate that the proposed PA-assisted design substantially improves both energy harvesting efficiency and computational performance compared to conventional antenna systems.

eess.SP↗

arXiv2025

Intelligent Reflecting Surfaces for Wireless Networks: Deployment Architectures, Key Solutions, and Field Trials

Intelligent reflecting surfaces (IRSs) have emerged as a transformative technology for wireless networks by improving coverage, capacity, and energy efficiency through intelligent manipulation of wireless propagation environments. This paper provides a comprehensive study on the deployment and coordination of IRSs for wireless networks. By addressing both single- and multi-reflection IRS architectures, we examine their deployment strategies across diverse scenarios, including point-to-point, point-to-multipoint, and point-to-area setups. For the single-reflection case, we highlight the trade-offs between passive and active IRS architectures in terms of beamforming gain, coverage extension, and spatial multiplexing. For the multi-reflection case, we discuss practical strategies to optimize IRS deployment and element allocation, balancing cooperative beamforming gains and path loss. The paper further discusses practical challenges in IRS implementation, including environmental conditions, system compatibility, and hardware limitations. Numerical results and field tests validate the effectiveness of IRS-aided wireless networks and demonstrate their capacity and coverage improvements. Lastly, promising research directions, including movable IRSs, near-field deployments, and network-level optimization, are outlined to guide future investigations.

eess.SP↗

arXiv2025

Decision Transformers for RIS-Assisted Systems with Diffusion Model-Based Channel Acquisition

Reconfigurable intelligent surfaces (RISs) have been recognized as a revolutionary technology for future wireless networks. However, RIS-assisted communications have to continuously tune phase-shifts relying on accurate channel state information (CSI) that is generally difficult to obtain due to the large number of RIS channels. The joint design of CSI acquisition and subsection RIS phase-shifts remains a significant challenge in dynamic environments. In this paper, we propose a diffusion-enhanced decision Transformer (DEDT) framework consisting of a diffusion model (DM) designed for efficient CSI acquisition and a decision Transformer (DT) utilized for phase-shift optimizations. Specifically, we first propose a novel DM mechanism, i.e., conditional imputation based on denoising diffusion probabilistic model, for rapidly acquiring real-time full CSI by exploiting the spatial correlations inherent in wireless channels. Then, we optimize beamforming schemes based on the DT architecture, which pre-trains on historical environments to establish a robust policy model. Next, we incorporate a fine-tuning mechanism to ensure rapid beamforming adaptation to new environments, eliminating the retraining process that is imperative in conventional reinforcement learning (RL) methods. Simulation results demonstrate that DEDT can enhance efficiency and adaptability of RIS-aided communications with fluctuating channel conditions compared to state-of-the-art RL methods.

eess.SP↗

arXiv2024

IRS Aided Federated Learning: Multiple Access and Fundamental Tradeoff

This paper investigates an intelligent reflecting surface (IRS) aided wireless federated learning (FL) system, where an access point (AP) coordinates multiple edge devices to train a machine leaning model without sharing their own raw data. During the training process, we exploit the joint channel reconfiguration via IRS and resource allocation design to reduce the latency of a FL task. Particularly, we propose three transmission protocols for assisting the local model uploading from multiple devices to an AP, namely IRS aided time division multiple access (I-TDMA), IRS aided frequency division multiple access (I-FDMA), and IRS aided non-orthogonal multiple access (INOMA), to investigate the impact of IRS on the multiple access for FL. Under the three protocols, we minimize the per-round latency subject to a given training loss by jointly optimizing the device scheduling, IRS phase-shifts, and communicationcomputation resource allocation. For the associated problem under I-TDMA, an efficient algorithm is proposed to solve it optimally by exploiting its intrinsic structure, whereas the highquality solutions of the problems under I-FDMA and I-NOMA are obtained by invoking a successive convex approximation (SCA) based approach. Then, we further develop a theoretical framework for the performance comparison of the proposed three transmission protocols. Sufficient conditions for ensuring that I-TDMA outperforms I-NOMA and those of its opposite are unveiled, which is fundamentally different from that NOMA always outperforms TDMA in the system without IRS. Simulation results validate our theoretical findings and also demonstrate the usefulness of IRS for enhancing the fundamental tradeoff between the learning latency and learning accuracy.

eess.SP↗