arXiv subjects

H. Purwar

Publications and source records attributed to H. Purwar.

7 recordsLinked to original sources

arXiv2025

The Imaging Time-of-Propagation Detector at Belle II

We report on the construction, operation, and performance of the Time-of-Propagation detector with imaging used for the Belle II experiment running at the Super-KEKB $e^+e^-$ collider. This detector is located in the central barrel region and uses Cherenkov light to provide particle identification among hadrons. The Cherenkov light is radiated in highly polished bars of synthetic fused silica (quartz) and transported to the ends of the bars via total internal reflection. One bar end is instrumented with finely segmented micro-channel-plate photomultiplier tubes to record the light, while the other end has a mirror attached to reflect the photons back to the instrumented end. Both the propagation times and hit positions of the Cherenkov photons are measured; these depend on the Cherenkov angle and together provide good discrimination among charged pions, kaons, and protons with momenta up to around 4 GeV/$c$. To date, the detector has been used to record and analyze almost 600 fb$^{-1}$ of Belle II data.

hep-ex↗

arXiv2025

Design and Commissioning of Readout Electronics for a $K_L^0$ and $\mu$ Detector at the Belle II Experiment

The K-long and muon detector (KLM) constitutes the outer-most volume of the Belle II spectrometer at the interaction region of the SuperKEKB collider in Tsukuba, Japan. The KLM detector was partially upgraded since the Belle experiment by replacing many of its resistive-plate chambers with scintillators containing wavelength-shifting fibers and instrumenting it with silicon photomultipliers. We describe the readout electronics, firmware, and software created to control and acquire data from the scintillators and resistive-plate chambers.

hep-ex↗

arXiv2022

Snowmass 2021 White Paper on Upgrading SuperKEKB with a Polarized Electron Beam: Discovery Potential and Proposed Implementation

Upgrading the SuperKEKB electron-positron collider with polarized electron beams opens a new program of precision physics at a center-of-mass energy of 10.58 GeV. This white paper describes the physics potential of this `Chiral Belle' program. It includes projections for precision measurements of $\sin^2\theta_W$ that can be obtained from independent left-right asymmetry measurements of $e^+e^-$ transitions to pairs of electrons, muons, taus, charm and b-quarks. The $\sin^2\theta_W$ precision obtainable at SuperKEKB will match that of the LEP/SLC world average, but at the centre-of-mass energy of 10.58 GeV. Measurements of the couplings for muons, charm, and $b$-quarks will be substantially improved and the existing $3\sigma$ discrepancy between the SLC $A_{LR}$ and LEP $A_{FB}^b$ measurements will be addressed. Precision measurements of neutral current universality will be more than an order of magnitude more precise than currently available. As the energy scale is well away from the $Z^0$-pole, the precision measurements will have sensitivity to the presence of a parity-violating dark sector gauge boson, $Z_{\rm dark}$. The program also enables the measurement of the anomalous magnetic moment $g-2$ form factor of the $\tau$ to be made at an unprecedented level of precision. A precision of $10^{-5}$ level is accessible with 40~ab$^{-1}$ and with more data it would start to approach the $10^{-6}$ level. This technique would provide the most precise information from the third generation about potential new physics explanations of the muon $g-2$ $4\sigma$ anomaly. Additional $\tau$ and QCD physics programs enabled or enhanced with having polarized electron beams are also discussed in this White Paper. This paper includes a summary of the path forward in R&D and next steps required to implement this upgrade and access its exciting discovery potential.

physics.acc-ph↗

arXiv2022

Belle II Executive Summary

Belle II is a Super $B$ Factory experiment, expected to record 50 ab$^{-1}$ of $e^+e^-$ collisions at the SuperKEKB accelerator until 2035. The large samples of $B$ mesons, charm hadrons, and tau leptons produced in the clean experimental environment of $e^+e^-$ collisions will provide the basis of a broad and unique flavor-physics program. Belle II will pursue physics beyond the Standard Model in many ways, for example: improving the precision of weak interaction parameters, particularly Cabibbo-Kobayashi-Maskawa (CKM) matrix elements and phases, and thus more rigorously test the CKM paradigm, measuring lepton-flavor-violating parameters, and performing unique searches for missing-mass dark matter events. Many key measurements will be made with world-leading precision.

hep-ex↗

arXiv2020

PCI-express based high-speed readout for the BelleII DAQ upgrade

Belle II is a new-generation B-factory experiment, dedicated to exploring new physics beyond the standard model of elementary particles in the flavor sector. Belle~II started data-taking in April 2018, using a synchronous data acquisition (DAQ) system based on pipelined trigger flow control. The Belle II DAQ system is designed to handle a 30-kHz trigger rate with approximately 1% of dead time, under the assumption of a raw event size of 1 MB. The DAQ system is reliable, and the overall data-taking efficiency reached 84.2% during the run period of January 2020 to June 2020. The current readout system cannot be operated in the term of 10 years from the viewpoint of DAQ maintainability; meanwhile, the readout system is obstructing high-speed data transmission. A solution involving a PCI-express-based readout module with high data throughput of up to 100 Gb/s was adopted to upgrade the Belle II DAQ system. We particularly focused on the design of firmware and software based on this new generation of readout board, called PCIe40, with an Altera Arria 10 field-programmable gate array chip. Forty-eight GBT (GigaBit Transceiver) serial links, PCI-express hard IP-based DMA architecture, interface of timing and trigger distribution system, and slow control system were designed to integrate with the current Belle II DAQ system. This paper describes the performances accomplished during the data readout and slow control tests conducted using a test bench and a demonstration performed using on-site front-end electronics, specifically involving Belle II TOP and KLM sub-detectors.

physics.ins-det↗

arXiv2018

Modelling of laser-plasma acceleration of relativistic electrons in the frame of ESCULAP project

We present numerical simulations results on the injection and acceleration of a 10 MeV, 10 pC electrons beam in a plasma wave generated in a gas cell by a 2J, 45 fs laser beam. This modeling is related to the ESCULAP project in which the electrons accelerated by the PHIL photo-injector is injected in a gas cell irradiated by the laser beam of the LASERIX system. Extensive modeling of the experiment was performed in order to determine optimal parameters of the laser plasma configurations. This was done with the newly developed numerical code WakeTraj . We propose a configuration that benefits of a highly compressed electron bunch and for which the injected electron beam can be efficiently coupled to the plasma wave and accelerated up to 140 MeV, with an energy spread lower than 5%.

physics.acc-ph↗

arXiv2017

Longitudinal compression and transverse matching of electron bunch for external injection LPWA at ESCULAP

We present theoretical and numerical studies of longitudinal compression and transverse matching of electron bunch before injecting into the Laser-plasma Wake Field Accelerator (LWFA) foreseen at the ESCULAP project in ORSAY. Longitudinal compression is performed with a dogleg chicane, the chicane is designed based on theory of beam optics, beam dynamics in dogleg is studied with ImpactT and cross checked with CSRtrack, both 3D space charge (SC) and coherent synchrotron radiation (CSR) effects are included. Simulation results show that the energy chirp at the dogleg entrance should be smaller than the nominal optic design value, in order to compensate the negative energy chirp increase caused by longitudinal SC, while CSR can be ignored in our case. With an optimized configuration, the electron bunch ($\sim$10MeV, 10pC) is compressed from 0.9ps RMS to 70fs RMS (53fs FWHM), with a peak current of 152A. Transverse matching is realized with a doublet and a triplet, they are matched with Madx and the electron bunch is tracked with ImpactT, simulation results show little difference with the nominal design values, that is due to the SC effect. Finally, by simply adjusting the quadrupole strength, a preliminary optimized configuration has been achieved, that matches the Courant-Snyder (C-S) parameters to $\alpha_{x}=0.01$,$\alpha_{y}=-0.02$, $\beta_{x}=0.014$m,$\beta_{y}=0.012$m at the plasma entrance.

physics.acc-ph↗