arXiv subjects

Herre S. J. van der Zant

Publications and source records attributed to Herre S. J. van der Zant.

At least 109 records · Page 6Linked to original sources

arXiv2016

Charge Transport through Conjugated Azomethine-based Single Molecules for Optoelectronic Applications

The single-molecule conductance of a 3-ring, conjugated azomethine was studied using the mechanically controlled breakjunction technique. Charge transport properties are found to be comparable to vinyl-based analogues; findings are supported with density functional calculations. The simple preparation and good transport properties make azomethine-based molecules an attractive class for use in polymer and single-molecule organic electronics.

cond-mat.mes-hall↗

arXiv2016

Colorimetry technique for scalable characterization of suspended graphene

Previous statistical studies on the mechanical properties of chemical-vapor-deposited (CVD) suspended graphene membranes have been performed by means of measuring individual devices or with techniques that affect the material. Here, we present a colorimetry technique as a parallel, non-invasive, and affordable way of characterizing suspended graphene devices. We exploit Newton rings interference patterns to study the deformation of a double-layer graphene drum 13.2 micrometer in diameter when a pressure step is applied. By studying the time evolution of the deformation, we find that filling the drum cavity with air is 2-5 times slower than when it is purged.

cond-mat.mes-hall↗

arXiv2016

Thickness dependent interlayer transport in vertical MoS2 Josephson junctions

We report on observations of thickness dependent Josephson coupling and multiple Andreev reflections (MAR) in vertically stacked molybdenum disulfide (MoS2) - molybdenum rhenium (MoRe) Josephson junctions. MoRe, a chemically inert superconductor, allows for oxide free fabrication of high transparency vertical MoS2 devices. Single and bilayer MoS2 junctions display relatively large critical currents (up to 2.5 uA) and the appearance of sub-gap structure given by MAR. In three and four layer thick devices we observe orders of magnitude lower critical currents (sub-nA) and reduced quasiparticle gaps due to proximitized MoS2 layers in contact with MoRe. We anticipate that this device architecture could be easily extended to other 2D materials.

cond-mat.mes-hall↗

arXiv2016

Franckeite: a naturally occurring van der Waals heterostructure

The fabrication of van der Waals heterostructures, artificial materials assembled by individually stacking atomically thin (2D) materials, is one of the most promising directions in 2D materials research. Until now, the most widespread approach to stack 2D layers relies on deterministic placement methods which are cumbersome when fabricating multilayered stacks. Moreover, they tend to suffer from poor control over the lattice orientations and the presence of unwanted adsorbates between the stacked layers. Here, we present a different approach to fabricate ultrathin heterostructures by exfoliation of bulk franckeite which is a naturally occurring and air stable van der Waals heterostructure (composed of alternating SnS2-like and PbS-like layers stacked on top of each other). Presenting both an attractive narrow bandgap (<0.7 eV) and p-type doping, we find that the material can be exfoliated both mechanically and chemically down to few-layer thicknesses. We present extensive theoretical and experimental characterizations of the material's electronic properties and crystal structure, and explore applications for near-infrared photodetectors (exploiting its narrow bandgap) and for p-n junctions based on the stacking of MoS2 (n-doped) and franckeite (p-doped)

cond-mat.mes-hall↗

arXiv2016

Centimeter-scale synthesis of ultrathin layered MoO3 by van der Waals epitaxy

We report on the large-scale synthesis of highly oriented ultrathin MoO3 layers using a simple and low-cost atmospheric pressure by van der Waals epitaxy growth on muscovite mica substrates. By this method we are able to synthetize high quality centimeter-scale MoO3 crystals with thicknesses ranging from 1.4 nm (two layers) up to a few nanometers. The crystals can be easily transferred to an arbitrary substrate (such as SiO2) by a deterministic transfer method and extensively characterized to demonstrate the high quality of the resulting crystal. We also study the electronic band structure of the material by density functional theory calculations. Interestingly, the calculations demonstrate that bulk MoO3 has a rather weak electronic interlayer interaction and thus it presents a monolayer-like band structure. Finally, we demonstrate the potential of this synthesis method for optoelectronic applications by fabricating large-area field-effect devices (10 micrometers by 110 micrometers in lateral dimensions), finding responsivities of 30 mA/W for a laser power density of 13 mW/cm2 in the UV region of the spectrum and also as an electron acceptor in a MoS2-based field-effect transistor.

cond-mat.mes-hall↗

arXiv2016

Graphene Gas Osmometers

Here it is shown that graphene membranes that separate 2 gases at identical pressure are deflected by osmotic pressure. The osmotic pressure is a consequence of differences in gas permeation rates into a graphene enclosed cavity. The deflection of the few layer graphene membranes is detected by an interferometric technique for measuring their tension-induced resonance frequency. Using a calibration measurement of the relation between resonance frequency and pressure, the time dependent osmotic pressure on the graphene is extracted. The osmotic pressure for different combinations of gases shows large differences that can be accounted for by a model based on the different gas permeation rates. Thus a graphene membrane based gas osmometer with a responsitivity of ~60 kHz/mbar and nanoscale dimensions is demonstrated.

cond-mat.mes-hall↗

arXiv2016

Enhanced superconductivity in atomically thin TaS2

The ability to exfoliate layered materials down to the single layer limit has opened the opportunity to understand how a gradual reduction in dimensionality affects the properties of bulk materials. Here we use this top-down approach to address the problem of superconductivity in the two-dimensional limit. The transport properties of electronic devices based on 2H tantalum disulfide flakes of different thicknesses are presented. We observe that superconductivity persists down to the thinnest layer investigated (3.5 nm), and interestingly, we find a pronounced enhancement in the critical temperature from 0.5 K to 2.2 K as the layers are thinned down. In addition, we propose a tight-binding model, which allows us to attribute this phenomenon to an enhancement of the effective electron-phonon coupling constant. This work provides evidence that reducing dimensionality can strengthen superconductivity as opposed to the weakening effect that has been reported in other 2D materials so far.

cond-mat.supr-con↗

arXiv2016

Titanium trisulfide (TiS3): a 2D semiconductor with quasi-1D optical and electronic properties

We present characterizations of few-layer titanium trisulfide (TiS3) flakes which, due to their reduced in-plane structural symmetry, display strong anisotropy in their electrical and optical properties. Exfoliated few-layer flakes show marked anisotropy of their in-plane mobilities reaching ratios as high as 7.6 at low temperatures. Based on the preferential growth axis of TiS3 nanoribbons, we develop a simple method to identify the in-plane crystalline axes of exfoliated few-layer flakes through angle resolved polarization Raman spectroscopy. Optical transmission measurements show that TiS3 flakes display strong linear dichroism with a magnitude (transmission ratios up to 30) much greater than that observed for other anisotropic two-dimensional (2D) materials. Finally, we calculate the absorption and transmittance spectra of TiS3 in the random-phase-approximation (RPA) and find that the calculations are in good agreement with the observed experimental optical transmittance.

cond-mat.mtrl-sci↗

arXiv2016

Spatial conductivity mapping of unprotected and capped black phosphorus using microwave microscopy

Thin layers of black phosphorus present an ideal combination of a 2D material with a tunable direct bandgap and high carrier mobility. However the material suffers from degradation in ambient conditions due to an oxidation reaction which involves water, oxygen and light. We have measured the spatial profile of the conductivity on flakes of black phosphorus as a function of time using scanning microwave impedance microscopy. A microwave excitation (3 GHz) allows to image a conducting sample even when covered with a dielectric layer. We observe that on bare black phosphorus, the conductivity changes drastically over the whole surface within a day. We demonstrate that the degradation process is slowed down considerably by covering the material with a 10 nm layer of hafnium oxide. It is stable for more than a week, opening up a route towards stable black phosphorus devices in which the high dielectric constant of hafnium oxide can be exploited. Covering black phosphorus with a 15 nm boron nitride flake changes the degradation process qualitatively, it is dominated by the edges of the flake indicating a diffusive process and happens on the scale of days.

cond-mat.mtrl-sci↗

arXiv2016

Near room-temperature memory devices based on hybrid spin-crossover SiO2 nanoparticles coupled to single-layer graphene nanoelectrodes

In this paper, we report on the charge transport properties of hybrid nanoparticles (NPs) based on the polymeric 1D compound [Fe(Htrz)2(trz)](BF4), which is one of the most promising SCO systems for designing electronic devices. In particular, we used for the first time hybrid SCO NPs covered with a silica shell and placed in between single-layer graphene electrodes. We evidence a reproducible thermal hysteresis loop in the conductance above room-temperature, meaning that no degradation of the current levels has been detected; we thus conclude that the robustness of the spin-transition is significantly improved as compared with previous results and with other reports where even larger assemblies and SCO objects were involved. This bistability combined with the versatility of graphene represents a promising scenario for a variety of technological applications but also for future sophisticated fundamental studies.

cond-mat.mes-hall↗

arXiv2016

Folded MoS2 layers with reduced interlayer coupling

We study molybdenum disulfide (MoS2) structures generated by folding single- and bilayer MoS2 flakes. We find that this modified layer stacking leads to a decrease in the interlayer coupling and an enhancement of the photoluminescence emission yield. We additionally find that folded single-layer MoS2 structures show a contribution to photoluminescence spectra of both neutral and charged excitons, which is a characteristic feature of single-layer MoS2 that has not been observed in multilayer MoS2. The results presented here open the door to fabrication of multilayered MoS2 samples with high optical absorption while maintaining the advantageous enhanced photoluminescence emission of single-layer MoS2 by controllably twisting the MoS2 layers.

cond-mat.mes-hall↗

arXiv2016

Visualizing the motion of graphene nanodrums

Membranes of suspended two-dimensional materials show a large variability in mechanical properties, in part due to static and dynamic wrinkles. As a consequence, experiments typically show a multitude of nanomechanical resonance peaks, which makes an unambiguous identification of the vibrational modes difficult. Here, we probe the motion of graphene nanodrum resonators with spatial resolution using a phase-sensitive interferometer. By simultaneously visualizing the local phase and amplitude of the driven motion, we show that unexplained spectral features represent split degenerate modes. When taking these into account, the resonance frequencies up to the eighth vibrational mode agree with theory. The corresponding displacement profiles however, are remarkably different from theory, as small imperfections increasingly deform the nodal lines for the higher modes. The Brownian motion, which is used to calibrate the local displacement, exhibits a similar mode pattern. The experiments clarify the complicated dynamic behaviour of suspended two-dimensional materials, which is crucial for reproducible fabrication and applications.

cond-mat.mes-hall↗

arXiv2015

Gate-tunable diode and photovoltaic effect in an organic-2D layered material p-n junction

The semiconducting p-n junction is a simple device structure with great relevance for electronic and optoelectronic applications. The successful integration of low-dimensional materials in electronic circuits has opened the way forward for producing gate-tunable p-n junctions. In that context, here we present an organic (Cu-phthalocyanine)-2D layered material (MoS2) hybrid p-n junction with both gate-tunable diode characteristics and photovoltaic effect. Our proof-of-principle devices show multifunctional properties with diode rectifying factors of up to 10^4, while under light exposure they exhibit photoresponse with a measured external quantum efficiency of ~ 11 %. As for their photovoltaic properties, we found open circuit voltages of up to 0.6 V and optical-to-electrical power conversion efficiency of 0.7 %. The extended catalogue of known organic semiconductors and two-dimensional materials offer the prospect for tailoring the properties and the performance of the resulting devices, making organic-2D p-n junctions promising candidates for future technological applications.

cond-mat.mtrl-sci↗

arXiv2015

Gate controlled photocurrent generation mechanisms in high-gain In2Se3 phototransistors

Photocurrent in photodetectors incorporating van der Waals materials is typically produced by a combination of photocurrent generation mechanisms that occur simultaneously during operation. Because of this, response times in these devices often yield to slower, high gain processes which cannot be turned off. Here we report on photodetectors incorporating the layered material In2Se3, which allow complete modulation of a high gain, photogating mechanism in the ON state in favor of fast photoconduction in the OFF state. While photoconduction is largely gate independent, photocurrent from the photogating effect is strongly modulated through application of a back gate voltage. By varying the back gate, we demonstrate control over the dominant mechanism responsible for photocurrent generation. Furthermore, due to the strong photogating effect, these direct-band gap, multi-layer phototransistors produce ultra-high gains of (9.8 +- 2.5) x 10^4 A/W and inferred detectivities of (3.3 +- 0.8) x 10^13 Jones, putting In2Se3 amongst the most sensitive 2D materials for photodetection studied to date.

cond-mat.mes-hall↗

arXiv2015

Precise and reversible band gap tuning in single-layer MoSe2 by uniaxial strain

We present photoluminescence (PL) spectroscopy measurements of single-layer MoSe2 as a function of uniform uniaxial strain. A simple clamping and bending method is described that allows for application of uniaxial strain to layered, 2D materials with strains up to 1.1% without slippage. Using this technique, we find that the electronic band gap of single layer MoSe2 can be reversibly tuned by -27 +- 2 meV per percent of strain. This is in agreement with our density-functional theory calculations, which estimate a modulation of -32 meV per percent of strain, taking into account the role of deformation of the underlying substrate upon bending. Finally, due to its narrow PL spectra as compared with that of MoS2, we show that MoSe2 provides a more precise determination of small changes in strain making it the ideal 2D material for strain applications.

cond-mat.mtrl-sci↗

arXiv2015

Graphene Squeeze-Film Pressure Sensors

The operating principle of squeeze-film pressure sensors is based on the pressure dependence of a membrane's resonance frequency, caused by the compression of the surrounding gas which changes the resonator stiffness. To realize such sensors, not only strong and flexible membranes are required, but also minimization of the membrane's mass is essential to maximize responsivity. Here, we demonstrate the use of a few-layer graphene membrane as a squeeze-film pressure sensor. A clear pressure dependence of the membrane's resonant frequency is observed, with a frequency shift of 4 MHz between 8 and 1000 mbar. The sensor shows a reproducible response and no hysteresis. The measured responsivity of the device is 9000 Hz/mbar, which is a factor 45 higher than state-of-the-art MEMS-based squeeze-film pressure sensors while using a 25 times smaller membrane area.

cond-mat.mes-hall↗

arXiv2015

Temperature dependent Raman spectroscopy of titanium trisulfide (TiS3) nanoribbons and nanosheets

Titanium trisulfide (TiS3) has recently attracted the interest of the 2D community as it presents a direct bandgap of ~1.0 eV, shows remarkable photoresponse, and has a predicted carrier mobility up to 10000 cm2V-1 s-1. However, a study of the vibrational properties of TiS3, relevant to understanding the electron-phonon interaction which can be the main mechanism limiting the charge carrier mobility, is still lacking. In this work, we take the first steps to study the vibrational properties of TiS3 through temperature dependent Raman spectroscopy measurements of TiS3 nanoribbons and nanosheets. Our investigation shows that all the Raman modes linearly soften (red shift) as the temperature increases from 88 K to 570 K, due to the anharmonic vibrations of the lattice which also includes contributions from the lattice thermal expansion. This softening with the temperature of the TiS3 modes is more pronounced than that observed in other 2D semiconductors such as MoS2, MoSe2, WSe2 or black phosphorus (BP). This marked temperature dependence of the Raman could be exploited to determine the temperature of TiS3 nanodevices by using Raman spectroscopy as a non-invasive and local thermal probe. Interestingly, the TiS3 nanosheets show a stronger temperature dependence of the Raman modes than the nanoribbons, which we attribute to a lower interlayer coupling in the nanosheets.

cond-mat.mes-hall↗

arXiv2015

Photocurrent generation with two-dimensional van der Waals semiconductors

Two-dimensional (2D) materials have attracted a great deal of interest in recent years. This family of materials allows for the realization of versatile electronic devices and holds promise for next-generation (opto)electronics. Their electronic properties strongly depend on the number of layers, making them interesting from a fundamental standpoint. For electronic applications, semiconducting 2D materials benefit from sizable mobilities and large on/off ratios, due to the large modulation achievable via the gate field-effect. Moreover, being mechanically strong and flexible, these materials can withstand large strain (>10\%) before rupture, making them interesting for strain engineering and flexible devices. Even in their single layer form, semiconducting 2D materials have demonstrated efficient light absorption, enabling large responsivity in photodetectors. Therefore, semiconducting layered 2D materials are strong candidates for optoelectronic applications, especially for photodetection. Here, we review the state-of-the-art in photodetectors based on semiconducting 2D materials, focusing on the transition metal dichalcogenides, novel van der Waals materials, black phosphorus, and heterostructures.

cond-mat.mes-hall↗