arXiv subjects

Hongjie Dai

Publications and source records attributed to Hongjie Dai.

At least 19 recordsLinked to original sources

arXiv2026

Agentic AI-powered flexible fiber-bundle endoscopy for high-resolution NIR-II fluorescence imaging in vivo

Fiber-bundle endoscopy offers a compact and flexible route for clinical fluorescence imaging through natural human orifices, but since its first report in the 1950s, it has remained limited by low spatial resolution, honeycomb artifacts, and inter-core crosstalk. The crosstalk becomes more pronounced at near-infrared-II wavelengths (NIR-II, 1000-3000 nm), a spectral window that offers superior contrast, resolution, and tissue penetration depth for biomedical imaging. Here, we present an AI-powered flexible endoscopy platform that overcomes these constraints through optical-computational co-design: optimizing ultrathin fiber bundles to mitigate crosstalk-induced image blur and enable high-fidelity image transmission across the visible-to-NIR-II spectral range, and developing an Agent-Guided Mixture-of-Experts (GAME) pipeline for honeycomb-artifact removal and image restoration. GAME provides a single restoration entry point for diverse biomedical images acquired with our endoscope, spanning cell, mouse and human samples. It dynamically routes each input to suitable restoration experts via a vision-language model, facilitating image reconstruction with a fourfold resolution improvement beyond the NyquistShannon sampling limit. The utility of our endoscope is demonstrated through in vivo NIR-II imaging of anatomical structures in mice, as well as imaging of the digital micromirror device (DMD)-projected human gastric tube and lymphatic system, paving the way for future clinical translation.

cs.CV↗

arXiv2023

Rechargeable Li/Cl$_2$ battery down to -80 °C

Low temperature rechargeable batteries are important to life in cold climates, polar/deep-sea expeditions and space explorations. Here, we report ~ 3.5 - 4 V rechargeable lithium/chlorine (Li/Cl2) batteries operating down to -80 °C, employing Li metal negative electrode, a novel CO2 activated porous carbon (KJCO2) as the positive electrode, and a high ionic conductivity (~ 5 to 20 mS cm-1 from -80 °C to 25 °C) electrolyte comprised of 1 M aluminum chloride (AlCl3), 0.95 M lithium chloride (LiCl), and 0.05 M lithium bis(fluorosulfonyl)imide (LiFSI) in low melting point (-104.5 °C) thionyl chloride (SOCl2). Between room-temperature and -80 °C, the Li/Cl2 battery delivered up to ~ 30,000 - 4,500 mAh g-1 first discharge capacity and a 1,200 - 5,000 mAh g-1 reversible capacity (discharge voltages in ~ 3.5 to 3.1 V) over up to 130 charge-discharge cycles. Mass spectrometry and X-ray photoelectron spectroscopy (XPS) probed Cl2 trapped in the porous carbon upon LiCl electro-oxidation during charging. At lower temperature down to -80 °C, SCl2/S2Cl2 and Cl2 generated by electro-oxidation in the charging step were trapped in porous KJCO2 carbon, allowing for reversible reduction to afford a high discharge voltage plateau near ~ 4 V with up to ~ 1000 mAh g-1 capacity for SCl2/S2Cl2 reduction and up to ~ 4000 mAh g-1 capacity at ~ 3.1 V plateau for Cl2 reduction. Towards practical use, we made CR2032 Li/Cl2 battery cells to drive digital watches at -40 °C and light emitting diode at -80 °C, opening Li/Cl2 secondary batteries for ultra-cold conditions.

physics.app-ph↗

arXiv2023

Shedding Light on Rechargeable Na/Cl$_2$ Battery

Advancing new ideas of rechargeable batteries represents an important path to meeting the ever increasing energy storage needs. Recently we showed rechargeable sodium/chlorine (Na/Cl$_2$) (or lithium/chlorine Li/Cl$_2$) batteries that used a Na (or Li) metal negative electrode, a microporous amorphous carbon nanosphere (aCNS) positive electrode and an electrolyte containing dissolved AlCl$_3$ and fluoride additives in thionyl chloride (SOCl$_2$). The main battery redox reaction involved conversion between NaCl and Cl$_2$ trapped in the carbon positive electrode, delivering a cyclable capacity of up to 1200 mAh g$^{-1}$ (based on positive electrode mass) at a ~ 3.5 V discharge voltage. Here, we discovered by X-ray photoelectron spectroscopy (XPS) that upon charging a Na/Cl$_2$ battery, chlorination of carbon in the positive electrode occurred to form C-Cl accompanied by molecular Cl$_2$ infiltrating the porous aCNS, consistent with Cl$_2$ probed by mass spectrometry. Synchrotron X-ray diffraction observed the development of graphitic ordering in the initially amorphous aCNS under battery charging when the carbon matrix was oxidized/chlorinated and infiltrated with Cl$_2$. The C-Cl, Cl$_2$ species and graphitic ordering were reversible upon discharge, accompanied by NaCl formation. The results revealed redox conversion between NaCl and Cl$_2$, reversible graphitic ordering/amorphourization of carbon through battery charge/discharge, and for the first time probed trapped Cl$_2$ in porous carbon by XPS.

physics.app-ph↗

arXiv2022

High-Capacity Rechargeable $Li/Cl_2$ Batteries with Graphite Positive Electrodes

Developing new types of high-capacity and high-energy density rechargeable battery is important to future generations of consumer electronics, electric vehicles, and mass energy storage applications. Recently we reported ~ 3.5 V sodium/chlorine $(Na/Cl_2)$ and lithium/chlorine $(Li/Cl_2)$ batteries with up to 1200 mAh $g^{-1}$ reversible capacity, using either a Na or Li metal as the negative electrode, an amorphous carbon nanosphere (aCNS) as the positive electrode, and aluminum chloride $(AlCl_3)$ dissolved in thionyl chloride $(SOCl_2)$ with fluoride-based additives as the electrolyte. The high surface area and large pore volume of aCNS in the positive electrode facilitated NaCl or LiCl deposition and trapping of $Cl_2$ for reversible $NaCl/Cl_2$ or $LiCl/Cl_2$ redox reactions and battery discharge/charge cycling. Here we report an initially low surface area/porosity graphite (DGr) material as the positive electrode in a $Li/Cl_2$ battery, attaining high battery performance after activation in carbon dioxide $(CO_2)$ at 1000 °C (DGr_ac) with the first discharge capacity ~ 1910 mAh $g^{-1}$ and a cycling capacity up to 1200 mAh $g^{-1}$. Ex situ Raman spectroscopy and X-ray diffraction (XRD) revealed the evolution of graphite over battery cycling, including intercalation/de-intercalation and exfoliation that generated sufficient pores for hosting $LiCl/Cl_2$ redox. This work opens up widely available, low-cost graphitic materials for high-capacity alkali metal/$Cl_2$ batteries. Lastly, we employed mass spectrometry to probe the $Cl_2$ trapped in the graphitic positive electrode, shedding light into the $Li/Cl_2$ battery operation.

physics.app-ph↗

arXiv2016

A High Efficiency Aluminum-Ion Battery Using an AlCl3-Urea Ionic Liquid Analogue Electrolyte

In recent years, impressive advances in harvesting renewable energy have led to pressing demand for the complimentary energy storage technology. Here, a high coulombic efficiency (~ 99.7%) Al battery is developed using earth-abundant aluminum as the anode, graphite as the cathode, and a cheap ionic liquid analogue electrolyte made from a mixture of AlCl3 and urea in 1.3 : 1 molar ratio. The battery displays discharge voltage plateaus around 1.9 V and 1.5 V (average discharge = 1.73 V) and yielded a specific cathode capacity of ~73 mAh g-1 at a current density of 100 mA g-1 (~ 1.4 C). High coulombic efficiency over a range of charge-discharge rates and stability over ~150-200 cycles was easily demonstrated. In-situ Raman spectroscopy clearly showed chloroaluminate anion intercalation/deintercalation of graphite in the cathode side during charge/discharge and suggested the formation of a stage 2 graphite intercalation compound when fully charged. Raman spectroscopy and nuclear magnetic resonance suggested the existence of AlCl4-, Al2Cl7- anions, and [AlCl2. (urea)n]+ cations in the urea/AlCl3 electrolyte when an excess of AlCl3 was present. Aluminum deposition therefore proceeded through two pathways, one involving Al2Cl7- anions and the other involving [AlCl2.(urea)n]+ cations. This battery is a promising prospect for a future high performance, low cost energy storage device.

physics.chem-ph↗

arXiv2015

Fluorescence Imaging In Vivo at Wavelengths beyond 1500 nm

Compared to imaging in the visible and near-infrared regions below 900 nm, imaging in the second near-infrared window (NIR-II, 1000-1700 nm) is a promising method for deep-tissue high-resolution optical imaging in vivo mainly due to the reduced scattering of photons traversing through biological tissues. Herein, semiconducting single-walled carbon nanotubes with large diameters were used for in vivo fluorescence imaging in the long-wavelength NIR region (1500-1700 nm, NIR-IIb). With this imaging agent, 3-4 um wide capillary blood vessels at a depth of about 3 mm could be resolved. Meanwhile, the blood-flow speeds in multiple individual vessels could be mapped simultaneously. Furthermore, NIR-IIb tumor imaging of a live mouse was explored. NIR-IIb imaging can be generalized to a wide range of fluorophores emitting at up to 1700 nm for high-performance in vivo optical imaging.

physics.bio-ph↗

arXiv2014

A mini review on NiFe-based materials as highly active oxygen evolution reaction electrocatalysts

Oxygen evolution reaction (OER) electrolysis, as an important reaction involved in water splitting and rechargeable metal-air battery, has attracted increasing attention for clean energy generation and efficient energy storage. Nickel/iron (NiFe)-based compounds have been known as active OER catalysts since the last century, and renewed interest has been witnessed in recent years on developing advanced NiFe-based materials for better activity and stability. In this review, we present the early discovery and recent progress on NiFe-based OER electrocatalysts in terms of chemical properties, synthetic methodologies and catalytic performances. The advantages and disadvantages of each class of NiFe-based compounds are summarized, including NiFe alloys, electro-deposited films and layered-double hydroxide nanoplates. Some mechanistic studies of the active phase of NiFe-based compounds are introduced and discussed to give insight into the nature of active catalytic site, which could facilitate further improving NiFe based OER electrocatalysts. Finally, some applications of NiFe-based compounds for OER are described, including the development of electrolyzer operating with a single AAA battery with voltage below 1.5V and high performance rechargeable Zn-air batteries.

cond-mat.mtrl-sci↗

arXiv2014

Through Skull Fluorescence Imaging of the Brain in a New Near-Infrared Window

To date, brain imaging has largely relied on X-ray computed tomography and magnetic resonance angiography with limited spatial resolution and long scanning times. Fluorescence-based brain imaging in the visible and traditional near-infrared regions (400-900 nm) is an alternative but currently requires craniotomy, cranial windows and skull thinning techniques, and the penetration depth is limited to 1-2 mm due to light scattering. Here, we report through-scalp and through-skull fluorescence imaging of mouse cerebral vasculature without craniotomy utilizing the intrinsic photoluminescence of single-walled carbon nanotubes in the 1.3-1.4 micrometre near-infrared window. Reduced photon scattering in this spectral region allows fluorescence imaging reaching a depth of >2 mm in mouse brain with sub-10 micrometre resolution. An imaging rate of ~5.3 frames/s allows for dynamic recording of blood perfusion in the cerebral vessels with sufficient temporal resolution, providing real-time assessment of blood flow anomaly in a mouse middle cerebral artery occlusion stroke model.

physics.med-ph↗

arXiv2014

Ultra-Fast Fluorescence Imaging in Vivo with Conjugated Polymer Fluorophores in the Second Near-Infrared Window

In vivo fluorescence imaging in the second near-infrared window (1.0-1.7 microns) can afford deep tissue penetration and high spatial resolution, owing to the reduced scattering of long-wavelength photons. Here, we synthesize a series of low-bandgap donor/acceptor copolymers with tunable emission wavelengths of 1050-1350 nm in this window. Non-covalent functionalization with phospholipid-polyethylene glycol results in water-soluble and biocompatible polymeric nanoparticles, allowing for live cell molecular imaging at > 1000 nm with polymer fluorophores for the first time. Importantly, the high quantum yield of the polymer allows for in vivo, deep-tissue and ultrafast imaging of mouse arterial blood flow with an unprecedented frame rate of > 25 frames per second. The high time resolution results in spatially and time resolved imaging of the blood flow pattern in cardiogram waveform over a single cardiac cycle (~ 200 ms) of a mouse, which has not been observed with fluorescence imaging in this window before.

physics.bio-ph↗

arXiv2013

Self-Assembly of Semiconducting Single-Walled Carbon Nanotubes into Dense, Aligned Rafts

Single-walled carbon nanotubes are promising nanoelectronic materials but face long-standing challenges including production of pure semiconducting SWNTs and integration into ordered structures. Here, highly pure semiconducting single-walled carbon nanotubes are separated from bulk materials and self-assembled into densely aligned rafts driven by depletion attraction forces. Microscopy and spectroscopy revealed a high degree of alignment and a high packing density of ~100 tubes/micron within SWNT rafts. Field-effect transistors made from aligned SWNT rafts afforded short channel (~150 nm long) devices comprised of tens of purely semiconducting SWNTs derived from chemical separation within a < 1 micron channel width, achieving unprecedented high on-currents (up to ~120 microamperes per device) with high on/off ratios. The average on-current was ~ 3-4 microamperes per tube. The results demonstrated densely aligned high quality semiconducting SWNTs for integration into high performance nanoelectronics.

physics.chem-ph↗

arXiv2013

A Ni-Fe Layered Double Hydroxide-Carbon Nanotube Complex for Water Oxidation

Highly active, durable and cost-effective electrocatalysts for water oxidation to evolve oxygen gas hold a key to a range of renewable energy solutions including water splitting and rechargeable metal-air batteries. Here, we report the synthesis of ultrathin nickel iron layered double hydroxide nanoplates on mildly oxidized multi-walled carbon nanotubes. Incorporation of Fe into the nickel hydroxide induced the formation of NiFe-layered double hydroxide. The nanoplates were covalently attached to a network of nanotubes, affording excellent electrical wiring to the nanoplates. The ultra-thin Ni-Fe layered double hydroxide nanoplates/carbon nanotube complex was found to exhibit unusually high electro-catalytic activity and stability for oxygen evolution and outperformed commercial precious metal Ir catalysts.

physics.chem-ph↗

arXiv2013

Experimentally Engineering the Edge Termination of Graphene Nanoribbons

The edges of graphene nanoribbons (GNRs) have attracted much interest due to their potentially strong influence on GNR electronic and magnetic properties. Here we report the ability to engineer the microscopic edge termination of high quality GNRs via hydrogen plasma etching. Using a combination of high-resolution scanning tunneling microscopy and first-principles calculations, we have determined the exact atomic structure of plasma-etched GNR edges and established the chemical nature of terminating functional groups for zigzag, armchair and chiral edge orientations. We find that the edges of hydrogen-plasma-etched GNRs are generally flat, free of structural reconstructions and are terminated by hydrogen atoms with no rehybridization of the outermost carbon edge atoms. Both zigzag and chiral edges show the presence of edge states.

cond-mat.mes-hall↗

arXiv2012

Multifunctional in vivo vascular imaging using near-infrared II fluorescence

In vivo real-time epifluorescence imaging of mouse hindlimb vasculatures in the second near-infrared region (NIR-II, 1.1~1.4 microns) is performed using single-walled carbon nanotubes (SWNTs) as fluorophores. Both high spatial resolution (~30 microns) and temporal resolution (<200 ms/frame) for small vessel imaging are achieved 1-3 mm deep in the tissue owing to the beneficial NIR-II optical window that affords deep anatomical penetration and low scattering. This spatial resolution is unattainable by traditional NIR imaging (NIR-I, 0.75~0.9 microns) or microscopic computed tomography (micro-CT), while the temporal resolution far exceeds scanning microscopic imaging techniques. Arterial and venous vessels are unambiguously differentiated using a dynamic contrast-enhanced NIR-II imaging technique based on their distinct hemodynamics. Further, the deep tissue penetration, high spatial and temporal resolution of NIR-II imaging allow for precise quantifications of blood velocity in both normal and ischemic femoral arteries, which are beyond the capability of ultrasonography at lower blood velocity.

physics.med-ph↗

arXiv2012

Three-dimensional imaging of single nanotube molecule endocytosis on plasmonic substrates

Investigating the cellular internalization pathways of single molecules or single nano-objects is important to understanding cell-matter interactions and to applications in drug delivery and discovery. Imaging and tracking the motion of single molecules on cell plasma membrane require high spatial resolution in three dimensions (3D). Fluorescence imaging along the axial dimension with nanometer resolution has been highly challenging but critical to revealing displacements in trans-membrane events. Here, utilizing a plasmonic ruler based on the sensitive distance dependence of near-infrared fluorescence enhancement (NIR-FE) of carbon nanotubes on a gold plasmonic substrate, we probe ~10 nm scale trans-membrane displacements through changes in nanotube fluorescence intensity, enabling observations of single nanotube endocytosis in 3D. Cellular uptake and trans-membrane displacements show clear dependences to temperature and clathrin assembly on cell membrane, suggesting that the cellular entry mechanism for a nanotube molecule is via clathrin-dependent endocytosis through the formation of clathrin-coated pits on cell membrane.

physics.bio-ph↗

arXiv2012

Covalent Hybrid of Spinel Manganese-Cobalt Oxide and Gra-phene as Advanced Oxygen Reduction Electrocatalysts

Through direct nanoparticle nucleation and growth on nitrogen doped, reduced graphene oxide sheets and cation substitution of spinel Co3O4 nanoparticles, a manganese-cobalt spinel MnCo2O4/graphene hybrid was developed as a highly efficient electrocatalyst for oxygen reduction reaction (ORR) in alkaline conditions. Electrochemical and X-ray near edge structure (XANES) investigations revealed that the nucleation and growth method for forming inorganic-nanocarbon hybrid results in covalent coupling between spinel oxide nanoparticles and N-doped reduced graphene oxide (N-rmGO) sheets. Carbon K-edge and nitrogen K-edge XANES showed strongly perturbed C-O and C-N bonding in the N-rmGO sheet, suggesting the formation of C-O-metal and C-N-metal bonds between N-doped graphene oxide and spinel oxide nanoparticles. Co L-edge and Mn L-edge XANES suggested substitu-tion of Co3+ sites by Mn3+, which increased the activity of the catalytic sites in the hybrid materials, further boosting the ORR activity compared to the pure cobalt oxide hybrid. The covalently bonded hybrid afforded much greater activity and durability than the physi-cal mixture of nanoparticles and carbon materials including N-rmGO. At the same mass loading, the MnCo2O4/N-graphene hybrid can outperform Pt/C in ORR current density at medium overpotentials with superior stability to Pt/C in alkaline solutions.

cond-mat.mtrl-sci↗

arXiv2011

Graphene Nanoribbons with Smooth Edges Behave as Quantum Wires

Graphene nanoribbons with perfect edges are predicted to exhibit interesting electronic and spintronic properties, notably quantum-confined bandgaps and magnetic edge states. However, graphene nanoribbons produced by lithography have, to date, exhibited rough edges and low-temperature transport characteristics dominated by defects, mainly variable range hopping between localized states in a transport gap near the Dirac point. Here, we report that one- and two-layer nanoribbons quantum dots made by unzipping carbon nanotubes10 exhibit well-defined quantum transport phenomena, including Coulomb blockade, Kondo effect, clear excited states up to ~20meV, and inelastic co-tunnelling. Along with signatures of intrinsic quantum-confined bandgaps and high conductivities, our data indicate that the nanoribbons behave as clean quantum wires at low temperatures, and are not dominated by defects.

cond-mat.mes-hall↗

arXiv2011

Co3O4 Nanocrystals on Graphene as a Synergistic Catalyst for Oxygen Reduction Reaction

Catalysts for oxygen reduction and evolution reactions are at the heart of key renewable energy technologies including fuel cells and water splitting. Despite tremendous efforts, developing oxygen electrode catalysts with high activity at low costs remains a grand challenge. Here, we report a hybrid material of Co3O4 nanocrystals grown on reduced graphene oxide (GO) as a high-performance bi-functional catalyst for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). While Co3O4 or graphene oxide alone has little catalytic activity, their hybrid exhibits an unexpected, surprisingly high ORR activity that is further enhanced by nitrogen-doping of graphene. The Co3O4/N-doped graphene hybrid exhibits similar catalytic activity but superior stability to Pt in alkaline solutions. The same hybrid is also highly active for OER, making it a high performance non-precious metal based bi-catalyst for both ORR and OER. The unusual catalytic activity arises from synergetic chemical coupling effects between Co3O4 and graphene.

cond-mat.mtrl-sci↗

arXiv2011

LiMn1-xFexPO4 Nanorods Grown on Graphene Sheets for Ultra-High Rate Performance Lithium Ion Batteries

Following the successful utilization of LiFePO4 as a novel cathode material for rechargeable lithium batteries, interest and efforts have grown in the research of another olivine structured material LiMnPO4 due to its higher operating potential voltage and energy density. However, high rate performance for LiMnPO4-based cathode materials has been challenging due to its extremely low electrical and ionic conductivities. Here, we develop a synthesis of Fe-doped LiMnPO4 (LiMn0.75Fe0.25PO4) nanorods directly bonded on graphene sheets (reduced from graphene oxide) to render LiMn0.75Fe0.25PO4 nanorods superior electrical conductivity. The LiMn0.75Fe0.25PO4 nanorod morphology is unique to materials grown on graphene over those grown in free solution, and is ideal for fast Li+ diffusion with the diffusion path of [010] crystallographic axis along the short radial direction (~20-30nm) of the nanorods. These together lead to ultrafast discharge within ~30-40 seconds without using a high carbon content. With high columbic efficiency above 99.5% at a high operating voltage, our LiMn0.75Fe0.25PO4 nanorods/graphene hybrid exhibits the best rate performance among all doped LiMnPO4 cathode materials for Lithium ion batteries.

cond-mat.mtrl-sci↗