SearcharxivSearch

arXiv subjects

Hyunsoo Yang

Publications and source records attributed to Hyunsoo Yang.

At least 19 recordsLinked to original sources

Energy-efficient spin Hall nano-oscillators using near-compensated CoGd ferrimagnets

Conventional spin Hall nano-oscillators (SHNOs) based on ferromagnets face practical limitations due to high threshold current densities and large external magnetic field requirements. Ferrimagnets provide an attractive alternative due to their unique magnetic dynamics and potential for energy-efficient spintronic devices. In this study, we report rare-earth-transition-metal (RE-TM) ferrimagnetic SHNOs utilizing Co1-xGdx alloys, in which compositional tuning enables high-performance operation near the magnetization compensation. The optimized SHNO operates at a low current density (1.43*10^7 A/cm^2), a small magnetic field (5 mT), and exhibits a narrow linewidth (0.61 MHz) simultaneously, showing an order-of-magnitude improvement over its ferromagnetic counterparts. This enhanced performance arises from high spin-orbit torque efficiency, low magnetic anisotropy, reduced effective magnetization, and minimized nonlinearity near the compensation point. These results establish RE-TM ferrimagnets as a promising material platform for next-generation spintronic devices and offer new strategies for realizing energy-efficient, high-performance spintronic oscillators.

cond-mat.mtrl-sci

Fractional parametric resonance in spintronic diodes

Parametric pumping is a powerful tool for the excitation, amplification, and processing of oscillations and waves of different nature. In general, parametric resonance can occur when the pumping frequency $f_p$ and eigenfrequency of a linear mode (or wave) $f_0$ satisfy the relation $f_p$=2$f_0$/n (n=1,2,3,...). While such parametric resonance is well known in mechanical, superconductive, and quantum systems, in magnetic and spintronic systems only the lowest (n=1) parametric resonance at double the spin wave mode frequency $f_p$=2$f_0$ was thoroughly studied and explored. Here, using a theoretical analysis based on both micromagnetic simulations and an analytical model, we show the emergence of resonances at fractional frequencies $f_p$=2$f_0$/n (with n>10) in spintronic diodes driven by the simultaneous action of ac spin-transfer torque (STT, current densities < $10^6$ A/cm2) and voltage-controlled magnetic anisotropy (VCMA, effective anisotropy fields < 50 mT). The analytical model shows that parametric magnetization dynamics is irreducible to the standard Mathieu model of a parametric oscillator and demonstrates the crucial role of VCMA-driven mode frequency modulation: together with parametric coupling, it results in higher-order odd (n=3,5,7,...) fractional resonances, observed above certain VCMA pumping threshold, while simultaneous action with linear STT drive produces thresholdless even (n=4,6,8,...) resonances. This higher-order parametric dynamics is not restricted to VCMA pumping and opens new directions for the application of spintronic diodes for nonlinear signal processing and electromagnetic energy harvesting.

cond-mat.mes-hall

A scalable and resource-efficient pipelined p-computer for probabilistic Ising machines

Probabilistic Ising machines (PIMs) based on probabilistic bits offer a hardware-friendly route to solve combinatorial optimization problems, but most digital implementations achieve high throughput by exploiting sparse interactions. This limits their applicability to dense problems, for which memory bandwidth and data movement become the dominant bottlenecks. Here, we show a resource-efficient pipelined Field-Programmable Gate Array architecture enabling high-throughput execution of fully-connected PIMs while maintaining scalability and modularity. This architecture design combines a deeply pipelined (>20 stages) probabilistic bit update path, which overlaps spin evaluation and local-field updates, with a bandwidth-aware on-chip memory organization for the coupling and bias matrices. The architecture supports 512 p-bits with 16-bit fixed-point coefficients and 1024 and 2048 p-bits with 10-bit and 2-bit coefficients, respectively, and operates at up to 300 MHz. At fixed degree of parallelization, it delivers an order-of-magnitude higher update rate than an optimized non-pipelined baseline, while improving the time-area trade-off for dense workloads. Validation on portfolio optimization and low-density parity-check decoding shows close agreement with software references and substantial reductions in time-to-solution relative to the non-pipelined design, establishing pipelining as an effective route to scalable digital probabilistic computing for dense optimization problems.

eess.SY

Harnessing orbital Hall effect for energy-efficient magnetization switching in room-temperature van der Waals ferromagnet Fe3GaTe2

2D van der Waals (vdW) magnets provide new opportunities for spin-orbit torque magnetoresistive random-access memory (SOT-MRAM) due to their unique properties. Electrically manipulating the magnetization of vdW magnets is key to realizing 2D SOT-MRAM, whereas conventional spin Hall materials such as heavy metals and topological insulators suffer from limitations in torque efficiency and energy consumption. Although recent studies show that the orbital Hall conductivity in light metals greatly exceeds the spin Hall conductivity, direct experimental demonstrations that the orbital Hall effect (OHE) can induce more energy-efficient SOT switching than the spin Hall effect in vdW magnets remain scarce. Here, we utilize Cr as the orbital current source to efficiently manipulate the magnetization of the vdW ferromagnet Fe3GaTe2 at room temperature. In the Fe3GaTe2/Pt (1.5 nm)/Cr (4.5 nm) trilayer structure, the orbital current originating from Cr is converted into the spin current via Pt, which then exerts a torque on Fe3GaTe2. Compared with control samples using 6 nm Pt as the spin current source, the switching current density in OHE-based devices is reduced by 3.9 times, resulting in a 52% reduction in power consumption. This work presents the promising potential of harnessing orbital currents to realize energy-efficient 2D SOT-MRAM.

cond-mat.mtrl-sci

Electrical manipulation and detection of perpendicular altermagnetic order via proximitized Dirac semimetal

Altermagnets, which combine antiferromagnetic-like magnetic compensation with ferromagnetic-like broken time-reversal symmetry, hold great promise for high-density and ultrafast spintronic applications. However, the detection and switching of perpendicular altermagnetic order are fundamentally constrained by magnetic symmetry, restricting both fundamental studies and practical implementation. We realize robust electrical reading and deterministic switching of perpendicular altermagnetic order by designing a Dirac semimetal/altermagnet heterostructure of PtTe2/CrSb. This engineered interface enables anomalous Hall readout via altermagnetic proximity effect and delivers efficient spin-orbit torque for manipulating the epitaxial perpendicular Neel vector in CrSb. These findings significantly broaden the functional scope of altermagnetic heterostructures and pave the way for highly scalable altermagnetic memory.

cond-mat.mtrl-sci

All-electric picosecond field-free spin-orbit torque switching in magnetic trilayers

Spin-orbit torque (SOT) enables the electrical manipulation of the magnetization with high speed and low energy consumption for magnetic random-access memory (MRAM) applications. Previous studies of short-pulse SOT switching have mainly focused on the nanosecond regime, whereas reports employing picosecond pulses remain scarce and have largely relied on field-assisted switching using bulky, high-power laser systems, limiting prospects for chip-level integration. Here, we introduce an all-electrical on-chip nanoplasma pulse generator capable of producing pulses as short as 6.4 ps, enabling ultrafast picosecond field-free SOT switching in magnetic trilayers. We show that reducing the pulse width lowers the writing energy by 2-3 orders of magnitude, with ultrafast Joule heating assistance playing an essential role in the enhanced efficiency of the picosecond regime. Our demonstration of ultrafast, all-electrical, and field-free SOT switching establishes the nanoplasma pulse generator as an on-chip platform for ultrafast spintronic studies, with promise for high-speed, energy-efficient, and scalable SOT-MRAM technologies.

cond-mat.mtrl-sci

A Fourier-Space Approach to Physics-Informed Magnetization Reconstruction from Nitrogen-Vacancy Measurements

Reconstructing magnetization textures from nitrogen-vacancy (NV) magnetometry stray-field measurements is a challenging, fundamentally ill-posed inverse problem, further complicated by the unknown effective distance between sensor and magnetic material. Here we show that incorporating a micromagnetic energy functional directly into the inversion filters out unphysical, high-energy configurations, while Fourier-space upward continuation of the stray field allows us to simultaneously fit the distance. Applied to measurements of the van der Waals ferromagnet Fe$_{3-x}$GaTe$_2$, it recovers an effective distance estimate of approximately 81nm and low-energy configurations that reproduce the observed field. More broadly, embedding physics directly into the reconstruction turns ill-posed magnetic inverse problems into transparent, interpretable reconstructions, with applicability well beyond NV magnetometry.

cond-mat.mes-hall

The 2026 Skyrmionics Roadmap

Magnetic skyrmions and related topological spin textures have emerged as a central topic in condensed-matter physics, combining fundamental significance with potential for transformative applications in spintronics, magnonics, and beyond. Over the past decade, advances in material platforms, imaging techniques, theoretical modeling, and device concepts have established skyrmionics as a rapidly expanding field. At the same time, challenges remain in stabilizing, controlling, and integrating such textures into functional architectures, while novel phenomena such as antiskyrmions, higher-order skyrmions, hopfions, and antiferromagnetic textures arise. The 2026 Skyrmionics Roadmap represents a collective effort of many authors, providing a comprehensive perspective on the current state-of-the-art and the outlook for the coming years. In 33 focused sections, each co-authored by two researchers, we chart progress in theory and modeling, material systems, skyrmion dynamics, and skyrmion technologies. By offering a consolidated vision, this Roadmap aims to guide both fundamental research and application-driven efforts, accelerating the transition of skyrmionics from conceptual breakthroughs toward practical technologies.

cond-mat.mes-hall

Observation of magnon torques mediated by orbital hybridization at the light metal/antiferromagnetic insulator interface

Magnon torques, which can operate without involving moving electrons, could circumvent the Joule heating issue. In conventional magnon torque systems, the spin source layer with strong spin-orbit coupling is utilized to inject magnons, and the efficiency is limited by the inherent spin Hall conductivity of the spin source layer. In this work, we observe magnon torques in the Cr/NiO/ferromagnet heterostructure with the effective spin Hall conductivity of 2.45x10^5 hbar/(2e{\Omega}m), twice that of the best conventional magnon torque system. We demonstrate the magnon-torque-driven switching of a perpendicularly magnetized CoFeB layer at room temperature, with a switching power consumption density of 0.136 mW/{\mu}m^2. We find that the magnon torque originates from the orbital hybridization and interfacial inversion symmetry breaking at the Cr/NiO interface. Our findings not only significantly enhance the efficiency of magnon torques, but also provide key insights into the fundamental mechanisms of magnon injections.

cond-mat.mtrl-sci

Bio-resorbable magnetic tunnel junctions

Magnetic tunnel junctions (MTJs) play a crucial role in spintronic applications, particularly data storage and sensors. Especially as a non-volatile memory, MTJs have received substantial attention due to its CMOS compatibility, low power consumption, fast switching speed, and high endurance. In parallel, bio-resorbable electronics have emerged as a promising solution for systems requiring temporary operation and secure data disposal, especially in military, intelligence, and biomedical systems where devices must safely disintegrate under physiological conditions. In this study, we investigate the bio-resorbability of MTJ by analyzing the dissolution behavior of its nanometer-thick constituent layers in phosphate-buffered saline (PBS) solution at pH 7.4, simulating physiological environments. The MTJ structures, composed of bio-resorbable materials, exhibit well-controlled degradation behaviors. Critically, as one of the ferromagnetic layers dissolves, binary information is irreversibly lost, within 10 hours of immersion. These findings highlight the potential of MTJs not only as high-performance memory elements but also as secure, transient data storage platforms. The ability to modify the dissolution lifetime by materials and thickness selection offers unique advantages for short-lived implantable devices, paving the way for integrating spintronic functionality into next-generation bioresorbable electronics.

cond-mat.mtrl-sci

Crystalline-dependent magnon torques in all-sputtered Hf/Cr2O3/ferromagnet heterostructures

Electron motion in spin-orbit torque devices inevitably leads to the Joule heating issue. Magnon torques can potentially circumvent this issue, as it enables the transport of spin angular momentum in insulating magnetic materials. In this work, we fabricate a sandwich structure composed of Hf/antiferromagnetic Cr2O3/ferromagnet and demonstrate that the magnon torque is strongly dependent on the crystalline structure of Cr2O3. Magnon torques are stronger when the Neel vector of Cr2O3 aligns parallel to the spin polarization generated in Hf, while they are suppressed when the Neel vector is perpendicular to the spin polarization. The magnon torque efficiency is estimated to be -0.134 using in-plane second harmonic Hall measurements. Using magnon torques, we achieve perpendicular magnetization switching of CoFeB, with a critical switching current density of 4.09 x 10^7 A/cm^2. Furthermore, the spin angular momentum loss due to the insertion of Cr2O3 is found to be lower than that of polycrystalline NiO. Our work highlights the role of antiferromagnet crystalline structures in controlling magnon torques, broadening the potential applications of magnon torques.

cond-mat.mtrl-sci

Securing generative artificial intelligence with parallel magnetic tunnel junction true randomness

Deterministic pseudo random number generators (PRNGs) used in generative artificial intelligence (GAI) models produce predictable patterns vulnerable to exploitation by attackers. Conventional defences against the vulnerabilities often come with significant energy and latency overhead. Here, we embed hardware-generated true random bits from spin-transfer torque magnetic tunnel junctions (STT-MTJs) to address the challenges. A highly parallel, FPGA-assisted prototype computing system delivers megabit-per-second true random numbers, passing NIST randomness tests after in-situ operations with minimal overhead. Integrating the hardware random bits into a generative adversarial network (GAN) trained on CIFAR-10 reduces insecure outputs by up to 18.6 times compared to the low-quality random number generators (RNG) baseline. With nanosecond switching speed, high energy efficiency, and established scalability, our STT-MTJ-based system holds the potential to scale beyond 106 parallel cells, achieving gigabit-per-second throughput suitable for large language model sampling. This advancement highlights spintronic RNGs as practical security components for next-generation GAI systems.

cs.LG

Coexistence and tunability of orbital and spin Hall effects in RuO$_2$

Altermagnetic materials, especially RuO$_2$, have recently attracted considerable attention for their unique magnetic properties and energy-efficient spintronic applications. However, recent experimental studies have reported highly conflicting signatures regarding altermagnetic spin splitting and charge--spin interconversion (CSI) in RuO$_2$. While some experiments link efficient CSI to non-relativistic altermagnetic spin-splitting effects, others observe large CSI signals in non-spin-splitting RuO$_2$, which are instead explained by relativistic inverse spin Hall effects. In this work, based on first-principles calculations, we reveal that these controversial experimental results originate from a phase-dependent coexistence and relative dominance of the orbital Hall effect (OHE) and spin Hall effect (SHE) in RuO$_2$. We systematically investigate the OHE and SHE in both altermagnetic and nonmagnetic phases of RuO$_2$. Our results show that the altermagnetic state hosts a giant OHE that exceeds the SHE by two orders of magnitude and carries an opposite sign. This dominant OHE can generate experimentally observed "SHE-like" voltages through orbital-to-spin conversion, explaining previously reported altermagnetic CSI signals. In contrast, OHE of nonmagnetic RuO$_2$ is suppressed and a large relativistic SHE emerges, in agreement with recent angle-resolved photoemission and spin-pumping experiments. Finally, we demonstrate that the coexistence of OHE and SHE is tunable via chemical doping, enabling on-demand modulation of CSI in in RuO$_2$. Our work provides a new physical mechanism for understanding CSI in RuO$_2$ and highlights the central role of orbital transport.

cond-mat.mtrl-sci

Ultrafast and reliable domain-wall and skyrmion logic in a chirally coupled ferrimagnet

Unlocking the spin degree of freedom in addition to the electron's charge, spin-based logic offers an in-memory computing architecture beyond-CMOS technology. Here, we encode information into chiral spin textures (e.g., chiral domain-wall and skyrmion) and achieve an ultrafast and reliable all-electrical logic by exploiting the Dzyaloshinskii-Moriya interaction-induced chiral coupling. Taking advantage of fast spin dynamics in antiferromagnetically coupled systems, we achieved a fast domain-wall motion passing through the logic gate, exceeding 1 kilometre per second, yielding an operation time of 50 picoseconds for a 50 nanometres-long logic gate. Furthermore, we present a fast logic operation with skyrmion bubbles in a racetrack that exhibits a topologically protected computation scheme. Our work demonstrates a viable approach for advanced microchips with high operation frequency and ultralow power consumption, paving the way for next-generation computing technologies.

cond-mat.mes-hall

250 Magnetic Tunnel Junctions-Based Probabilistic Ising Machine

In combinatorial optimization, probabilistic Ising machines (PIMs) have gained significant attention for their acceleration of Monte Carlo sampling with the potential to reduce time-to-solution in finding approximate ground states. However, to be viable in real applications, further improvements in scalability and energy efficiency are necessary. One of the promising paths toward achieving this objective is the development of a co-design approach combining different technology layers including device, circuits and algorithms. Here, we experimentally demonstrate a fully connected PIM architecture based on 250 spin-transfer torque magnetic tunnel junctions (STT-MTJs), interfaced with an FPGA. Our computing approach integrates STT-MTJ-based tunable true random number generators with advanced annealing techniques, enabling the solution of problems with any topology and size. For sparsely connected graphs, the massive parallel architecture of our PIM enables a cluster parallel update method that overcomes the serial limitations of Gibbs sampling, leading to a 10 times acceleration without hardware changes. Furthermore, we prove experimentally that the simulated quantum annealing boosts solution quality 20 times over conventional simulated annealing while also increasing robustness to MTJ variability. Short pulse switching measurements indicate that STT-MTJ-based PIMs can potentially be 10 times faster and 10 times more energy-efficient than graphic processing units, which paves the way for future large-scale, high-performance, and energy-efficient unconventional computing hardware implementations.

cond-mat.mtrl-sci

Nonreciprocal spin-charge interconversion in topological insulator/ferromagnet heterostructures

The process of spin-charge interconversion is critical in modern spintronics. Nonetheless, experiments conducted on a wide variety of magnetic heterostructures consistently report that charge-to-spin and spin-to-charge conversion efficiencies can be vastly different, especially in the case of topological insulators (TI). This discrepancy between the two "reciprocal" effects remains unexplained, hampering the development of spin devices based on spin-charge conversion. In this study, we investigate both spin-charge and charge-spin interconversion processes in TI Bi2Te3/Py and Pt/Py bilayers experimentally using spin-torque ferromagnetic resonance and spin pumping techniques. We find that the measured charge-to-spin conversion efficiency (C-S) in TI/Py is ~26 times larger than the measured spin-to-charge conversion efficiency (S-C), whereas C-S and S-C are comparable in the case of Pt/Py. Using a theoretical model enforcing Onsager reciprocity, we show that spin-to-charge and charge-to-spin conversions in bilayers are genuinely inequivalent, and explain our results as arising from the distinct spin current leakage that takes place during the interconversion. This work clarifies previous conflicting reports on spin-charge interconversion processes and highlights the potential of interface engineering to achieve efficient spin transport in TI-based ferromagnetic heterostructures, paving the way for highly efficient spintronic devices.

cond-mat.mtrl-sci

Magnon-mediated perpendicular magnetization switching by topological crystalline insulator SnTe with high spin Hall conductivity

Magnons possess the ability to transport spin angular momentum in insulating magnetic materials, a characteristic that sets them apart from traditional electronics where power consumption arises from the movement of electrons. However, the practical application of magnon devices demands room temperature operation and low switching power of perpendicular magnetization. Here we demonstrate the low-power manipulation of perpendicular magnetization via magnon torques in SnTe/NiO/CoFeB devices at room temperature. Topological crystalline insulator SnTe exhibits a high spin Hall conductivity of $\sigma_s \approx 6.1\times 10^4 (\hbar/2e)\cdot (\Omega \cdot m)^{-1}$, which facilitates the generation of magnon currents in an antiferromagnetic insulator NiO. The magnon currents traverse the 20-nm-thick NiO layer and subsequently exert magnon torques on the adjacent ferromagnetic layer, leading to magnetization switching. Notably, we achieve a 22-fold reduction in power consumption in SnTe/NiO/CoFeB heterostructures compared to Bi2Te3/NiO/CoFeB control samples. Our findings establish the low-power perpendicular magnetization manipulation through magnon torques, significantly expanding the range of topological materials with practical applications.

cond-mat.mtrl-sci

Emergence of Giant Magnetic Chirality during Dimensionality Crossover of Magnetic Materials

Chirality, an intrinsic preference for a specific handedness, is a fundamental characteristic observed in nature. In magnetism, magnetic chirality arises from the anti-symmetric Dzyaloshinskii-Moriya interaction in competition with the symmetric Heisenberg exchange interaction. Traditionally, the anti-symmetric interaction has been considered minor relative to the symmetric interaction. In this study, we demonstrate an observation of giant magnetic chirality during the dimensionality crossover of magnetic materials from three-dimensional to two-dimensional. The ratio between the anti-symmetric and symmetric interactions exhibits a reversal in their dominance over this crossover, overturning the traditional consideration. This observation is validated theoretically using a non-local interaction model and tight-binding calculation with distinct pairing schemes for each exchange interaction throughout the crossover. Additional experiments investigating the asphericity of orbital moments corroborate the robustness of our findings. Our findings highlight the critical role of dimensionality in shaping magnetic chirality and offer strategies for engineering chiral magnet states with unprecedented strength, desired for the design of spintronic materials.

cond-mat.mtrl-sci