Searcharxiv⌕ Search

arXiv subjects

Jing Guo

Publications and source records attributed to Jing Guo.

At least 127 records · Page 7Linked to original sources
arXiv2020

Periodic Solutions to Reversible Second Order Autonomous Systems with Commensurate Delays

Existence and spatio-temporal patterns of periodic solutions to second order reversible equivariant autonomous systems with commensurate delays are studied using the Brouwer $O(2) \times Γ\times \mathbb Z_2$-equivariant degree theory, where $O(2)$ is related to the reversing symmetry, $Γ$ reflects the symmetric character of the coupling in the corresponding network and $\mathbb Z_2$ is related to the oddness of the right-hand-side. Abstract results are supported by a concrete example with $Γ= D_6$ -- the dihedral group of order 12.

math.DS↗
arXiv2020

On simple-minded systems over representation-finite self-injective algebras

Let $A$ be a representation-finite self-injective algebra over an algebraically closed field $k$. We give a new characterization for an orthogonal system in the stable module category $A$-$\stmod$ to be a simple-minded system. As a by-product, we show that every Nakayama-stable orthogonal system in $A$-$\stmod$ extends to a simple-minded system.

math.RT↗
arXiv2020

Quantum phases of SrCu2(BO3)2 from high-pressure thermodynamics

We report heat capacity measurements of SrCu$_2$(BO$_3$)$_2$ under high pressure along with simulations of relevant quantum spin models and map out the $(P,T)$ phase diagram of the material. We find a first-order quantum phase transition between the low-pressure quantum dimer paramagnet and a phase with signatures of a plaquette-singlet state below T = $2$ K. At higher pressures, we observe a transition into a previously unknown antiferromagnetic state below $4$ K. Our findings can be explained within the two-dimensional Shastry-Sutherland quantum spin model supplemented by weak inter-layer couplings. The possibility to tune SrCu$_2$(BO$_3$)$_2$ between the plaquette-singlet and antiferromagnetic states opens opportunities for experimental tests of quantum field theories and lattice models involving fractionalized excitations, emergent symmetries, and gauge fluctuations.

cond-mat.str-el↗
arXiv2020

Generalized bioinspired approach to a daytime radiative cooling "skin"

Energy-saving cooling materials with strong operability are desirable towards sustainable thermal management. Inspired by the cooperative thermo-optical effect in fur of polar bear, we develop a flexible and reusable cooling skin via laminating a polydimethylsiloxane film with a highly-scattering polyethylene aerogel. Owing to its high porosity of 97.9% and tailored pore size of 3.8 +- 1.4 micrometers, superior solar reflectance of 0.96 and high transparency to irradiated thermal energy of 0.8 can be achieved at a thickness of 2.7 mm. Combined with low thermal conductivity of 0.032 W/m/K of the aerogel, the cooling skin exerts midday sub-ambient temperature drops of 5-6 degrees in a metropolitan environment, with an estimated limit of 14 degrees under ideal service conditions. We envision that this generalized bilayer approach will construct a bridge from night-time to daytime radiative cooling and pave the way for economical, scalable, flexible and reusable cooling materials.

physics.app-ph↗
arXiv2020

Cost-effectiveness Analysis of Antiepidemic Policies and Global Situation Assessment of COVID-19

With a two-layer contact-dispersion model and data in China, we analyze the cost-effectiveness of three types of antiepidemic measures for COVID-19: regular epidemiological control, local social interaction control, and inter-city travel restriction. We find that: 1) intercity travel restriction has minimal or even negative effect compared to the other two at the national level; 2) the time of reaching turning point is independent of the current number of cases, and only related to the enforcement stringency of epidemiological control and social interaction control measures; 3) strong enforcement at the early stage is the only opportunity to maximize both antiepidemic effectiveness and cost-effectiveness; 4) mediocre stringency of social interaction measures is the worst choice. Subsequently, we cluster countries/regions into four groups based on their control measures and provide situation assessment and policy suggestions for each group.

physics.soc-ph↗
arXiv2020

Dualism of the 4f electrons and high-temperature antiferromagnetism of the heavy-fermion compound YbCoC$_{2}$

We report on the first study of the noncentrosymmetric ternary carbide YbCoC$_{2}$. Our magnetization, specific heat, resistivity and neutron diffraction measurements consistently show that the system behaves as a heavy-fermion compound, displaying an amplitude-modulated magnetic structure below the Néel temperature reaching $T_{N}$ = 33 K under pressure. Such a large value, being the highest among the Yb-based systems, is explained in the light of our ab initio calculations, which show that the 4f electronic states of Yb have a dual nature -- i.e., due to their strong hybridization with the 3d states of Co, 4f states expose both localized and itinerant properties.

cond-mat.str-el↗
arXiv2020

An Additive Decomposition in S-Primitive Towers

We consider the additive decomposition problem in primitive towers and present an algorithm to decompose a function in an S-primitive tower as a sum of a derivative in the tower and a remainder which is minimal in some sense. Special instances of S-primitive towers include differential fields generated by finitely many logarithmic functions and logarithmic integrals. A function in an S-primitive tower is integrable in the tower if and only if the remainder is equal to zero. The additive decomposition is achieved by viewing our towers not as a traditional chain of extension fields, but rather as a direct sum of certain subrings. Furthermore, we can determine whether or not a function in an S-primitive tower has an elementary integral without solving any differential equations. We also show that a kind of S-primitive towers, known as logarithmic towers, can be embedded into a particular extension where we can obtain a finer remainder.

cs.SC↗
arXiv2019

Hall coefficient diagnostics of surface state in pressurized SmB6

In this study, we report the first results of the high-pressure Hall coefficient (RH) measurements in the putative topological Kondo insulator SmB6 up to 37 GPa. Below 10 GPa, our data reveal that RH(T) exhibits a prominent peak upon cooling below 20 K. Remarkably, the temperature at which surface conduction dominates coincides with the temperature of the peak in RH(T). The temperature dependent resistance and Hall coefficient can be well fitted by a two-channel model with contributions from the metallic surface and the thermally activated bulk states. When the bulk of SmB6 becomes metallic and magnetic at ~ 10 GPa, both the RH(T) peak and the resistance plateau disappear simultaneously. Our results indicate that the RH(T) peak is a fingerprint to diagnose the presence of a metallic surface state in SmB6. The high-pressure magnetic state of SmB6 is robust to 180 GPa, and no evidence of superconductivity is observed in the metallic phase.

cond-mat.str-el↗
arXiv2019

Crossover from two-dimensional to three-dimensional superconducting states in bismuth-based cuprate superconductor

To decipher the mechanism of high temperature superconductivity, it is important to know how the superconducting pairing emerges from the unusual normal states of cuprate superconductors, including pseudogap, anomalous Fermi liquid and strange metal (SM). A long-standing issue under debate is how the superconducting pairing is formed and condensed in the SM phase because the superconducting transition temperature is the highest in this phase. Here, we report the first experimental observation of a pressure-induced crossover from two- to three-dimensional superconducting states in the optimally-doped Bi2Sr2CaCu2O8+delta bulk superconductor at a pressure above 2.8 GPa, through state-of-the-art in-situ high-pressure measurements of resistance, magnetoresistance and magnetic susceptibility. By analyzing the temperature dependence of resistance, we find that the two-dimensional (2D) superconducting transition exhibits a Berezinski-Kosterlitz-Thouless-like behavior. The emergence of this 2D superconducting transition provides direct and strong evidence that the SM state is predominantly 2D-like. This is important to a thorough understanding of the phase diagram of cuprate superconductors.

cond-mat.supr-con↗
arXiv2019

Fault-Tolerant Path-Embedding of Twisted Hypercube-Like Networks THLNs

The twisted hypercube-like networks($THLNs$) contain several important hypercube variants. This paper is concerned with the fault-tolerant path-embedding of $n$-dimensional($n$-$D$) $THLNs$. Let $G_n$ be an $n$-$D$ $THLN$ and $F$ be a subset of $V(G_n)\cup E(G_n)$ with $|F|\leq n-2$. We show that for arbitrary two different correct vertices $u$ and $v$, there is a faultless path $P_{uv}$ of every length $l$ with $2^{n-1}-1\leq l\leq 2^n-f_v-1-α$, where $α=0$ if vertices $u$ and $v$ form a normal vertex-pair and $α=1$ if vertices $u$ and $v$ form a weak vertex-pair in $G_n-F$($n\geq5$).

math.CO↗
arXiv2019

Biomimetic Polymer Film with Brilliant Brightness Using a One-Step Water Vapor-Induced Phase Separation Method

The scales of the white Cyphochilus beetles are endowed with unusual whiteness arising from the exceptional scattering efficiency of their disordered ultrastructure optimized through millions of years of evolution. Here, a simple, one-step method based on water vapor-induced phase separation (VIPS) is developed to prepare ultra-thin polystyrene (PS) films with similar microstructure and comparable optical performance. A typical biomimetic 3.5 um PS film exhibits a diffuse reflectance of 61% at 500 nm, which translates into a transport mean free path below 1 um. A complete optical characterization through Monte Carlo simulations reveals how such scattering performance arises from the scattering coefficient and scattering anisotropy, whose interplay provides insight into the morphological properties of the material. The potential of bright-white coatings as smart sensors or wearable devices is highlighted using a treated ultra-thin film as a real-time sensor for human exhalation.

physics.app-ph↗
arXiv2019

Computational Assessment of Silicon Quantum Gate Based on Detuning Mechanism for Quantum Computing

Silicon-based quantum computing has the potential advantages of low cost, high integration density, and compatibility with CMOS technologies. The detuning mechanism has been used to experimentally achieve silicon two-qubit quantum gates and programmable quantum processors. In this paper, the scaling behaviors and variability issues are explored by numerical device simulations of a model silicon quantum gate based on the detuning mechanism. The device physics of quantum gates modulation, tradeoff between device speed and quantum fidelity, and impact of variability on the implementation of a quantum algorithm are examined. The results indicate the attractive potential to achieve high speed and fidelity silicon quantum gates with a low operation voltage. To scale up, reducing the device variability and mitigating the variability effect are identified to be indispensable for reliable implementing a quantum computing algorithm with the silicon quantum gates based on the detuning mechanism. A scheme to use the control electronics for mitigating the variability of quantum gates is proposed.

cond-mat.mes-hall↗
arXiv2019

Machine Learning Approach for Device-Circuit Co-Optimization of Stochastic-Memristive-Device-Based Boltzmann Machine

A Boltzmann machine whose effective "temperature" can be dynamically "cooled" provides a stochastic neural network realization of simulated annealing, which is an important metaheuristic for solving combinatorial or global optimization problems with broad applications in machine intelligence and operations research. However, the hardware realization of the Boltzmann stochastic element with "cooling" capability has never been achieved within an individual semiconductor device. Here we demonstrate a new memristive device concept based on two-dimensional material heterostructures that enables this critical stochastic element in a Boltzmann machine. The dynamic cooling effect in simulated annealing can be emulated in this multi-terminal memristive device through electrostatic bias with sigmoidal thresholding distributions. We also show that a machine-learning-based method is efficient for device-circuit co-design of the Boltzmann machine based on the stochastic memristor devices in simulated annealing. The experimental demonstrations of the tunable stochastic memristors combined with the machine-learning-based device-circuit co-optimization approach for stochastic-memristor-based neural-network circuits chart a pathway for the efficient hardware realization of stochastic neural networks with applications in a broad range of electronics and computing disciplines.

cs.ET↗
arXiv2019

Thick-disc model to explain the spectral state transition in NGC 247

We propose the thick-disc model of Gu et al. 2016 to interpret the transition between soft ultraluminous state (SUL) and supersoft ultraluminous (SSUL) state in NGC 247. As accretion rate increases, the inner disc will puff up and act as shield to block the innermost X-ray emission regions and absorb both soft and hard X-ray photons. The absorbed X-ray emission will be re-radiated as a much softer blackbody X-ray spectrum. Hence NGC 247 shows flux dips in the hard X-ray band and transits from the SUL state to the SSUL state. The $\sim 200$s transition timescale can be explained by the viscous timescale. According to our model, the inner disc in the super-soft state is thicker and has smaller viscous timescale than in the soft state. X-ray flux variability, which is assumed to be driven by accretion rate fluctuations, might be viscous time-scale invariant. Therefore, in the SSUL state, NGC 247 is more variable. The bolometric luminosity is saturated in the thick disc; the observed radius-temperature relation can therefore be naturally explained.

astro-ph.HE↗
arXiv2019

Record-High Superconductivity in Niobium-Titanium Alloy

Here we report the observation of extraordinary superconductivity in a pressurized commercial niobium-titanium alloy. We find that its zero-resistance superconductivity persists from ambient pressure to the pressure as high as 261.7 GPa, a record high pressure up to which a known superconducting state can continuously survives. Remarkably, at such an ultra-high pressure, although the ambient pressure volume is shrunk by 45% without structural phase transition, the superconducting transition temperature (TC) increases to ~19.1 K from ~9.6 K, and the critical magnetic field (HC2) at 1.8 K has been enhanced to 19 T from 15.4 T. These results set new records for both of the TC and the HC2 among all the known alloy superconductors composed of only transition metal elements. The remarkable high pressure superconducting properties observed in the NbTi alloy not only expand our knowledge on this important commercial superconductor but also are helpful for a better understanding on the superconducting mechanism.

cond-mat.supr-con↗
arXiv2018

Observation of superconductivity in pressurized Weyl semimetal candidate TaIrTe4

Here we report the observation of superconductivity in pressurized type-II Weyl semimetal (WSM) candidate TaIrTe4 by means of complementary high-pressure transport and synchrotron X-ray diffraction measurements. We find that TaIrTe4 shows superconductivity with transition temperature (TC) of 0.57 K at the pressure of ~23.8 GPa. Then, the TC value increases with pressure and reaches ~2.1 K at 65.7 GPa. In situ high-pressure Hall coefficient (RH) measurements at low temperatures demonstrate that the positive RH increases with pressure until the critical pressure of the superconducting transition is reached, but starts to decrease upon further increasing pressure. Above the critical pressure, the positive magnetoresistance effect disappears simultaneously. Our high pressure X-ray diffraction measurements reveal that, at around the critical pressure the lattice of the TaIrTe4 sample is distorted by the application of pressure and its volume is reduced by ~19.2%, the value of which is predicted to result in the change of the electronic structure significantly. We propose that the pressure-induced distortion in TaIrTe4 is responsible for the change of topology of Fermi surface and such a change favors the emergence of superconductivity. Our results clearly demonstrate the correlation among the lattice distortion, topological physics and superconductivity in the WSM.

cond-mat.supr-con↗
arXiv2018

Underlay Drone Cell for Temporary Events: Impact of Drone Height and Aerial Channel Environments

Providing seamless connection to a large number of devices is one of the biggest challenges for the Internet of Things (IoT) networks. Using a drone as an aerial base station (ABS) to provide coverage to devices or users on ground is envisaged as a promising solution for IoT networks. In this paper, we consider a communication network with an underlay ABS to provide coverage for a temporary event, such as a sporting event or a concert in a stadium. Using stochastic geometry, we propose a general analytical framework to compute the uplink and downlink coverage probabilities for both the aerial and the terrestrial cellular system. Our framework is valid for any aerial channel model for which the probabilistic functions of line-of-sight (LOS) and non-line-of-sight (NLOS) links are specified. The accuracy of the analytical results is verified by Monte Carlo simulations considering two commonly adopted aerial channel models. Our results show the non-trivial impact of the different aerial channel environments (i.e., suburban, urban, dense urban and high-rise urban) on the uplink and downlink coverage probabilities and provide design guidelines for best ABS deployment height.

cs.IT↗