arXiv subjects

Jisoo Moon

Publications and source records attributed to Jisoo Moon.

At least 19 recordsLinked to original sources

arXiv2023

Signatures of Majorana Bound States in the Diffraction Patterns of Extended Superconductor-Topological Insulator-Superconductor Josephson Junctions

In an extended superconductor-topological insulator-superconductor (S-TI-S) Josephson junction in a magnetic field, localized Majorana bound states (MBS) are predicted to exist at the cores of Josephson vortices where the local phase difference across the junction is an odd-multiple of $\pi$. These states contribute a supercurrent with a $4\pi$-periodic current-phase relation (CPR) that adds to the conventional $2\pi$-periodic sinusoidal CPR. In this work, we present a comprehensive experimental study of the critical current vs. applied magnetic field diffraction patterns of lateral Nb-Bi$_2$Se$_3$-Nb Josephson junctions. We compare our observations to a model of the Josephson dynamics in the S-TI-S junction system to explore what feature of MBS are, or are not, exhibited in these junctions. Consistent with the model, we find several distinct deviations from a Fraunhofer diffraction pattern that is expected for a uniform sin$({\phi})$ CPR. In particular, we observe abrupt changes in the diffraction pattern at applied magnetic fields in which the current-carrying localized MBS are expected to enter the junction, and a lifting of the odd-numbered nodes consistent with a $4\pi$-periodic sin$(\phi/2)$-component in the CPR. We also see that although the even-numbered nodes often remain fully-formed, we sometimes see deviations that are consistent with quasiparticle-induced fluctuations in the parity of the MBS pairs that encodes quantum information.

cond-mat.supr-con↗

arXiv2023

Interlayer Exciton-Phonon Bound State in Bi2Se3/monolayer WS2 van der Waals Heterostructures

The ability to assemble layers of two-dimensional (2D) materials to form permutations of van der Waals heterostructures provides significant opportunities in materials design and synthesis. Interlayer interactions provide a path to new properties and functionality, and understanding such interactions is essential to that end. Here we report formation of interlayer exciton-phonon bound states in Bi2Se3/WS2 heterostructures, where the Bi2Se3 A1(3) surface phonon, a mode particularly susceptible to electron-phonon coupling, is imprinted onto the excitonic emission of the WS2. The exciton-phonon bound state (or exciton-phonon quasiparticle) presents itself as evenly separated peaks superposed on the WS2 excitonic photoluminescence spectrum, whose periodic spacing corresponds to the A1(3) surface phonon energy. Low-temperature polarized Raman spectroscopy of Bi2Se3 reveals intense surface phonons and local symmetry breaking that allows the A1(3) surface phonon to manifest in otherwise forbidden scattering geometries. Our work advances knowledge of the complex interlayer van der Waals interactions, and facilitates technologies that combine the distinctive transport and optical properties from separate materials into one device for possible spintronics, valleytronics, and quantum computing applications.

cond-mat.mes-hall↗

arXiv2022

Room-temperature oxygen transport in nano-thin BixOySez enables precision modulation of 2D materials

Oxygen conductors and transporters are important to several consequential renewable energy technologies, including fuel cells and syngas production. Separately, monolayer transition metal dichalcogenides (TMDs) have demonstrated significant promise for a range of applications, including quantum computing, advanced sensors, valleytronics, and next-gen optoelectronics. Here, we synthesize a few nanometer-thick BixOySez compound that strongly resembles a rare R3m bismuth oxide (Bi2O3) phase, and combine it with monolayer TMDs, which are highly sensitive to their environment. We use the resulting 2D heterostructure to study oxygen transport through BixOySez into the interlayer region, whereby the 2D material properties are modulated, finding extraordinarily fast diffusion at room temperature under laser exposure. The oxygen diffusion enables reversible and precise modification of the 2D material properties by controllably intercalating and deintercalating oxygen. Changes are spatially confined, enabling submicron features (e.g. pixels), and are long-term stable for more than 221 days. Our work suggests few nanometer-thick BixOySez is a promising unexplored room-temperature oxygen transporter. Additionally, our findings suggest the mechanism can be applied to other 2D materials as a generalized method to manipulate their properties with high precision and submicron spatial resolution.

cond-mat.mtrl-sci↗

arXiv2020

Ambipolar magneto-optical response of ultra-low carrier density topological insulators

We have investigated the THz range magneto-optical response of ultralow carrier density films of Sb$_2$Te$_3$ using time-domain THz polarimetry. Undoped Sb$_2$Te$_3$ has a chemical potential that lies inside the bulk valence band. Thus its topological response is masked by bulk carriers. However, with appropriate buffer layer engineering and chemical doping, Sb$_2$Te$_3$ thin films can be grown with extremely low electron or hole densities. The ultralow carrier density samples show unusual optical properties and quantized response in the presence of magnetic fields. Consistent with the expectations for Dirac fermions, a quantized Hall response is seen even in samples where the zero field conductivity falls below detectable levels. The discontinuity in the Faraday angle with small changes in the filling fraction across zero is manifestation of the parity anomaly in 2D Dirac systems with broken time reversal symmetry.

cond-mat.mes-hall↗

arXiv2020

Structurally and Chemically Compatible BiInSe3 Substrate for Topological Insulator Thin Films

Quality of epitaxial films strongly depends on their structural and chemical match with the substrates: the more closely they match, the better the film quality is. Topological insulators (TI) such as Bi2Se3 thin films are of no exception. However, there do not exist commercial substrates that match with TI films both structurally and chemically, at the level commonly available for other electronic materials. Here, we introduce BiInSe3 bulk crystal as the best substrate for Bi2Se3 thin films. These films exhibit superior surface morphology, lower defect density and higher Hall mobility than those on other substrates, due to structural and chemical match provided by the BiInSe3 substrate. BiInSe3 substrate could accelerate the advance of TI research and applications.

cond-mat.mtrl-sci↗

arXiv2019

Observation of optical absorption correlated with surface state of topological insulator

We performed broadband optical transmission measurements of Bi2Se3 and In-doped Bi(1-x)In(x)2Se3 thin films, where in the latter the spin-orbit coupling (SOC) strength can be tuned by introducing In. Drude and interband transitions exhibit In-dependent changes that are consistent with evolution from metallic (x=0) to insulating (x=1) nature of the end compounds. Most notably, an optical absorption peak located at hw=1eV in Bi2Se3 is completely quenched at x=0.06, the critical concentration where the phase transition from TI into non-TI takes place. For this x, the surface state (SS) is vanished from the band structure as well. The correlation between the 1eV optical peak and the SS in the x-dependences suggests that the peak is associated with the SS. We further show that when Bi2Se3 is electrically gated, the 1eV-peak becomes stronger(weaker) when electron is depleted from (accumulated into) the SS. These observations combined together demonstrate that under the hw=1eV illumination electron is excited from a bulk band into the topological surface band of Bi2Se3. The optical population of surface band is of significant importance not only for fundamental study but also for TI-based optoelectronic device application.

cond-mat.mtrl-sci↗

arXiv2019

Electronic correlation determining correlated plasmons in Sb-doped Bi$_2$Se$_3$

Electronic correlation is believed to play an important role in exotic phenomena such as insulator-metal transition, colossal magneto resistance and high temperature superconductivity in correlated electron systems. Recently, it has been shown that electronic correlation may also be responsible for the formation of unconventional plasmons. Herewith, using a combination of angle-dependent spectroscopic ellipsometry, angle resolved photoemission spectroscopy and Hall measurements all as a function of temperature supported by first-principles calculations, the existence of low-loss high-energy correlated plasmons accompanied by spectral weight transfer, a fingerprint of electronic correlation, in topological insulator (Bi$_{0.8}$Sb$_{0.2}$)$_2$Se$_3$ is revealed. Upon cooling, the density of free charge carriers in the surface states decreases whereas those in the bulk states increase, and that the newly-discovered correlated plasmons are key to explaining this phenomenon. Our result shows the importance of electronic correlation in determining new correlated plasmons and opens a new path in engineering plasmonic-based topologically-insulating devices.

cond-mat.mtrl-sci↗

arXiv2019

Pb-doped p-type Bi$_2$Se$_3$ thin films via interfacial engineering

Due to high density of native defects, the prototypical topological insulator (TI), Bi$_2$Se$_3$, is naturally n-type. Although Bi$_2$Se$_3$ can be converted into p-type by substituting 2+ ions for Bi, only light elements such as Ca have been so far effective as the compensation dopant. Considering that strong spin-orbit coupling (SOC) is essential for the topological surface states, a light element is undesirable as a dopant, because it weakens the strength of SOC. In this sense, Pb, which is the heaviest 2+ ion, located right next to Bi in the periodic table, is the most ideal p-type dopant for Bi$_2$Se$_3$. However, Pb-doping has so far failed to achieve p-type Bi$_2$Se$_3$ not only in thin films but also in bulk crystals. Here, by utilizing an interface engineering scheme, we have achieved the first Pb-doped p-type Bi$_2$Se$_3$ thin films. Furthermore, at heavy Pb-doping, the mobility turns out to be substantially higher than that of Ca-doped samples, indicating that Pb is a less disruptive dopant than Ca. With this SOC-preserving counter-doping scheme, it is now possible to fabricate Bi$_2$Se$_3$ samples with tunable Fermi levels without compromising their topological properties.

cond-mat.mtrl-sci↗

arXiv2019

Quantum-Hall to Insulator Transition in Ultra-low-carrier-density Topological Insulator Films and a Hidden Phase of the Zeroth Landau Level

A key feature of the topological surface state under a magnetic field is the presence of the zeroth Landau level at the zero energy. Nonetheless, it has been challenging to probe the zeroth Landau level due to large electron-hole puddles smearing its energy landscape. Here, by developing ultra-low-carrier density topological insulator Sb$_2$Te$_3$ films, we were able to reach an extreme quantum limit of the topological surface state and uncover a hidden phase at the zeroth Landau level. First, we discovered an unexpected quantum-Hall-to-insulator-transition near the zeroth Landau level. Then, through a detailed scaling analysis, we found that this quantum-Hall-to-insulator-transition belongs to a new universality class, implying that the insulating phase discovered here has a fundamentally different origin from those in non-topological systems.

cond-mat.mtrl-sci↗

arXiv2019

Record-High Proximity-Induced Anomalous Hall Effect in (Bi$_x$Sb$_{1-x}$)2Te$_3$ Thin Film Grown on CrGeTe$_3$ Substrate

Quantum anomalous Hall effect(QAHE) can only be realized at extremely low temperatures in magnetically doped topological insulators(TIs) due to limitations inherent with the doping precess. In an effort to boost the quantization temperature of QAHE, magnetic proximity effect in magnetic insulator/TI heterostructures has been extensively investigated. However, the observed anomalous Hall resistance has never been more than several Ohms, presumably owing to the interfacial disorders caused by the structural and chemical mismatch. Here, we show that, by growing (BixSb1-x)2Te3(BST) thin films on structurally and chemically well-matched, ferromagnetic-insulating CeGeTe3(CGT) substrates, the proximity-induced anomalous Hall resistance can be enhanced by more than an order of magnitude. This sheds light on the importance of structural and chemical match for magnetic insulator/TI proximity systems.

cond-mat.mes-hall↗

arXiv2019

Ferromagnetic Anomalous Hall Effect in Cr-doped Bi$_2$Se$_3$ Thin Films via Surface-State Engineering

The anomalous Hall effect (AHE) is a non-linear Hall effect appearing in magnetic conductors, boosted by internal magnetism beyond what is expected from the ordinary Hall effect. With the recent discovery of the quantized version of the AHE, the quantum anomalous Hall effect (QAHE), in Cr- or V-doped topological insulator (TI) (Sb,Bi)$_2$Te$_3$ thin films, the AHE in magnetic TIs has been attracting significant interest. However, one of the puzzles in this system has been that while Cr- or V-doped (Sb,Bi)$_2$Te$_3$ and V-doped Bi$_2$Se$_3$ exhibit AHE, Cr-doped Bi$_2$Se$_3$ has failed to exhibit even ferromagnetic AHE, the expected predecessor to the QAHE, though it is the first material predicted to exhibit the QAHE. Here, we have successfully implemented ferromagnetic AHE in Cr-doped Bi$_2$Se$_3$ thin films by utilizing a surface state engineering scheme. Surprisingly, the observed ferromagnetic AHE in the Cr-doped Bi$_2$Se$_3$ thin films exhibited only positive slope regardless of the carrier type. We show that this sign problem can be explained by the intrinsic Berry curvature of the system as calculated from a tight-binding model combined with a first-principles method.

cond-mat.mtrl-sci↗

arXiv2018

Engineering artificial topological phases via superlattices

The search for new topological materials and states of matter is presently at the forefront of quantum materials research. One powerful approach to novel topological phases beyond the thermodynamic space is to combine different topological/functional materials into a single materials platform in the form of superlattices. However, despite some previous efforts, there has been a significant gap between theories and experiments in this direction. Here, we provide the first detailed set of experimentally-verifiable phase diagrams of topological superlattices composed of archetypal topological insulator (TI), Bi$_{2}$Se$_{3}$, and normal insulator (NI), In$_{2}$Se$_{3}$, by combining molecular-level materials control, low-temperature magnetotransport measurements, and field theoretical calculations. We show how the electronic properties of topological superlattices evolve with unit-layer thicknesses and utilize the weak antilocalization effect as a tool to gain quantitative insights into the evolution of conducting channels within each set of heterostructures. This orchestrated study opens the door to the possibility of creating a variety of artificial-topological-phases by combining topological materials with various other functional building blocks such as superconductors and magnetic materials.

cond-mat.mes-hall↗

arXiv2018

Electric field modulated topological magnetoelectric effect in Bi$_2$Se$_3$

Topological insulators have been predicted to exhibit a variety of interesting phenomena including a quantized magnetoelectric response and novel spintronics effects due to spin textures on their surfaces. However, experimental observation of these phenomena has proved difficult due to the finite bulk carrier density which may overwhelm the intrinsic topological responses that are expressed at the surface. Here, we demonstrate a novel ionic gel gating technique to tune the chemical potential of Bi$_{2}$Se$_{3}$ thin films while simultaneously performing THz spectroscopy. We can tune the carrier concentration by an order of magnitude and shift the Fermi energy, E$_{F} $ to as low as $\simeq$ 10 meV above the Dirac point. At high bias voltage and magnetic field, we observe a quantized Faraday angle consistent with the topological magnetoelectric effect that can be tuned by ionic gel gating through a number of plateau states

cond-mat.mes-hall↗

arXiv2018

Direct visualization of current induced spin accumulation in topological insulators

Charge-to-spin conversion in various material systems is the key for the fundamental understanding of spin-orbitronis as well as the development of efficient means to manipulate the magnetization. We report the direct spatial imaging of current induced spin accumulation at the channel edges of Bi2Se3 and BiSbTeSe2 topological insulators by a scanning photovoltage microscope at room temperature. The spin polarization is along the out-of-plane direction with opposite signs for the two channel edges. The accumulated spin direction reverses sign upon changing the current direction and the detected spin signal shows a linear dependence on the magnitude of currents, which indicates that our observed phenomena are the current induced effects. The spin Hall angle of Bi2Se3 and BiSbTeSe2 is determined to be 0.0085 and 0.0616, respectively. We further image the current induced spin accumulation in a Pt heavy metal. Our results open up the possibility of optically detecting the current induced spin accumulations, and thus point towards a better understanding of the interaction between spins and circularly polarized light.

cond-mat.mes-hall↗

arXiv2018

Solution to the hole-doping problem and tunable quantum Hall effect in Bi$_{2}$Se$_{3}$ thin films

Bi$_{2}$Se$_{3}$, one of the most widely studied topological insulators (TIs), is naturally electron-doped due to n-type native defects. However, many years of efforts to achieve p-type Bi$_{2}$Se$_{3}$ thin films have failed so far. Here, we provide a solution to this long-standing problem, showing that the main culprit has been the high density of interfacial defects. By suppressing these defects through an interfacial engineering scheme, we have successfully implemented p-type Bi$_{2}$Se$_{3}$ thin films down to the thinnest topological regime. On this platform, we present the first tunable quantum Hall effect (QHE) study in Bi$_{2}$Se$_{3}$ thin films, and reveal not only significantly asymmetric QHE signatures across the Dirac point but also the presence of competing anomalous states near the zeroth Landau level. The availability of doping tunable Bi$_{2}$Se$_{3}$ thin films will now make it possible to implement various topological quantum devices, previously inaccessible.

cond-mat.mtrl-sci↗

arXiv2018

Efficient Charge-Spin Conversion and Magnetization Switching though Rashba Effect at Topological Insulator/Ag Interface

We report the observation of efficient charge-to-spin conversion in the three-dimensional topological insulator (TI) Bi2Se3 and Ag bilayer by the spin-torque ferromagnetic resonance technique. The spin orbit torque ratio in the Bi2Se3/Ag/CoFeB heterostructure shows a significant enhancement as the Ag thickness increases to ~2 nm and reaches a value of 0.5 for 5 nm Ag, which is ~3 times higher than that of Bi2Se3/CoFeB at room temperature. The observation reveals the interfacial effect of Bi2Se3/Ag exceeds that of the topological surface states (TSS) in the Bi2Se3 layer and plays a dominant role in the charge-to-spin conversion in the Bi2Se3/Ag/CoFeB system. Based on the first-principles calculations, we attribute our observation to the large Rashba-splitting bands which wrap the TSS band and has the same net spin polarization direction as TSS of Bi2Se3. Subsequently, we demonstrate for the first time the Rashba induced magnetization switching in Bi2Se3/Ag/Py with a low current density of 5.8 X 10^5 A/cm2.

cond-mat.mtrl-sci↗

arXiv2016

Helicity dependent photovoltaic effect in Bi2Se3 under normal incident light

Topological insulators (TIs) form a new class of materials with insulating bulk and surface conduction ensured by topologically protected surface states (TPSS). We investigate the impact of the helicity of a normally incident laser beam on the photovoltaic effect in the TI Bi2Se3. The observation of a helicity dependent photovoltaic effect for normally incident light indicates the presence of out-of-plane spin components for some TPSSs due to the hexagonal warping. In addition, fluctuations in the electrostatic potential at the surface locally break the rotational symmetry of the film allowing the helicity dependent photovoltaic effect. Our result suggests that engineering local electrostatic potentials in Bi2Se3 would allow the control of optically generated spin currents, which may be useful for applications in spin-optoelectronics.

cond-mat.mtrl-sci↗

arXiv2016

Disorder-driven topological phase transition in Bi2Se3 films

Topological insulators (TI) are a phase of matter that host unusual metallic states on their surfaces. Unlike the states that exist on the surface of conventional materials, these so-called topological surfaces states (TSS) are protected against disorder-related localization effects by time reversal symmetry through strong spin-orbit coupling. By combining transport measurements, angle-resolved photo-emission spectroscopy and scanning tunneling microscopy, we show that there exists a critical level of disorder beyond which the TI Bi2Se3 loses its ability to protect the metallic TSS and transitions to a fully insulating state. The absence of the metallic surface channels dictates that there is a change in topological character, implying that disorder can lead to a topological phase transition even without breaking the time reversal symmetry. This observation challenges the conventional notion of topologically-protected surface states, and will provoke new studies as to the fundamental nature of topological phase of matter in the presence of disorder.

cond-mat.mtrl-sci↗