Searcharxiv⌕ Search

arXiv subjects

Johann Coraux

Publications and source records attributed to Johann Coraux.

49 records · Page 3Linked to original sources

Europium Underneath Graphene on Ir(111): Intercalation Mechanism, Magnetism, and Band Structure

The intercalation of Eu underneath Gr on Ir(111) is comprehensively investigated by microscopic, magnetic, and spectroscopic measurements, as well as by density functional theory. Depending on the coverage, the intercalated Eu atoms form either a $(2 \times 2)$ or a $(\sqrt{3} \times \sqrt{3})$R$30^{\circ}$ superstructure with respect to Gr. We investigate the mechanisms of Eu penetration through a nominally closed Gr sheet and measure the electronic structures and magnetic properties of the two intercalation systems. Their electronic structures are rather similar. Compared to Gr on Ir(111), the Gr bands in both systems are essentially rigidly shifted to larger binding energies resulting in n-doping. The hybridization of the Ir surface state $S_1$ with Gr states is lifted, and the moire superperiodic potential is strongly reduced. In contrast, the magnetic behavior of the two intercalation systems differs substantially as found by X-ray magnetic circular dichroism. The $(2 \times 2)$ Eu structure displays plain paramagnetic behavior, whereas for the $(\sqrt{3} \times \sqrt{3})$R$30^{\circ}$ structure the large zero-field susceptibility indicates ferromagnetic coupling, despite the absence of hysteresis at 10 K. For the latter structure, a considerable easy-plane magnetic anisotropy is observed and interpreted as shape anisotropy.

cond-mat.mes-hall↗

Modulating charge density and inelastic optical response in graphene by atmospheric pressure localized intercalation through wrinkles

The intercalation of an oxide barrier between graphene and its metallic substrate for chem- ical vapor deposition is a contamination-free alternative to the transfer of graphene to dielectric supports, usually needed for the realization of electronic devices. Low-cost pro- cesses, especially at atmospheric pressure, are desirable but whether they are achievable remains an open question. Combining complementary microscopic analysis, providing structural, electronic, vibrational, and chemical information, we demonstrate the spontaneous reactive intercalation of 1.5 nm-thick oxide ribbons between graphene and an iridium substrate, at atmospheric pressure and room temperature. We discover that oxygen-containing molecules needed for forming the ribbons are supplied through the graphene wrinkles, which act as tunnels for the efficient diffusion of molecules entering their free end. The intercalated oxide ribbons are found to modify the graphene-support interaction, leading to the formation of quasi-free-standing high quality graphene whose charge density is modulated in few 10-100 nm-wide ribbons by a few 10^12 cm-2, where the inelastic optical response is changed, due to a softening of vibrational modes - red-shifts of Raman G and 2D bands by 6 and 10 cm-1, respectively.

cond-mat.mtrl-sci↗

Strains Induced by Point Defects in Graphene on a Metal

Strains strongly affect the properties of low-dimensional materials, such as graphene. By combining in situ, in operando, reflection high energy electron diffraction experiments with first-principles calculations, we show that large strains, above 2%, are present in graphene during its growth by chemical vapor deposition on Ir(111) and when it is subjected to oxygen etching and ion bombardment. Our results unravel the microscopic relationship between point defects and strains in epitaxial graphene and suggest new avenues for graphene nanostructuring and engineering its properties through introduction of defects and intercalation of atoms and molecules between graphene and its metal substrate.

cond-mat.mtrl-sci↗

Local deformations and incommensurability of high quality epitaxial graphene on a weakly interacting transition metal

We investigate the fine structure of graphene on iridium, which is a model for graphene weakly interacting with a transition metal substrate. Even the highest quality epitaxial graphene displays tiny imperfections, i.e. small biaxial strains, ca. 0.3%, rotations, ca. 0.5^{\circ}, and shears over distances of ca. 100 nm, and is found incommensurate, as revealed by X-ray diffraction and scanning tunneling microscopy. These structural variations are mostly induced by the increase of the lattice parameter mismatch when cooling down the sample from the graphene preparation temperature to the measurement temperature. Although graphene weakly interacts with iridium, its thermal expansion is found positive, contrary to free-standing graphene. The structure of graphene and its variations are very sensitive to the preparation conditions. All these effects are consistent with initial growth and subsequent pining of graphene at steps.

cond-mat.mtrl-sci↗

Suppression of Multilayer Graphene Patches during CVD Graphene growth on Copper

By limiting the carbon segregation at the copper surface defects, a pulsed chemical vapor deposition method for single layer graphene growth is shown to inhibit the formation of few-layer regions, leading to a fully single-layered graphene homogeneous at the centimeter scale. Graphene field-effect devices obtained after transfer of pulsed grown graphene on oxidized silicon exhibit mobilities above 5000 cm^2.V^-1.s^-1.

cond-mat.mes-hall↗

Magnetism of cobalt nanoclusters on graphene on iridium

The structure and magnetic properties of Co clusters, comprising from 26 to 2700 atoms, self-organized or not on the graphene/Ir(111) moiré, were studied in situ with the help of scanning tunneling microscopy and X-ray magnetic circular dichroism. Surprisingly the small clusters have almost no magnetic anisotropy. We find indication for a magnetic coupling between the clusters. Experiments have to be performed carefully so as to avoid cluster damage by the soft X-rays.

cond-mat.mtrl-sci↗

Graphene on Ir(111): Physisorption with chemical modulation

The non-local van der Waals density functional (vdW-DF) approach is applied to calculate the binding of graphene to Ir(111). The precise agreement of the calculated mean height h = 3.41 Å of the C atoms with their mean height h = (3.38 \pm 0.04) Å as measured by the X-ray standing wave (XSW) technique provides a benchmark for the applicability of the non-local functional. We find bonding of graphene to Ir(111) to be due to the van der Waals interaction with an antibonding average contribution from chemical interaction. Despite its globally repulsive character, in certain areas of the large graphene moiré unit cell charge accumulation between Ir substrate and grapheneC atoms is observed, signaling a weak covalent bond formation.

cond-mat.mtrl-sci↗

Fast computing of scattering maps of nanostructures using graphical processing units

Scattering maps from strained or disordered nano-structures around a Bragg reflection can either be computed quickly using approximations and a (Fast) Fourier transform, or using individual atomic positions. In this article we show that it is possible to compute up to 4.10^10 $reflections.atoms/s using a single graphic card, and we evaluate how this speed depends on number of atoms and points in reciprocal space. An open-source software library (PyNX) allowing easy scattering computations (including grazing incidence conditions) in the Python language is described, with examples of scattering from non-ideal nanostructures.

cond-mat.mtrl-sci↗

Epitaxial graphene prepared by chemical vapor deposition on single crystal thin iridium films on sapphire

Uniform single layer graphene was grown on single-crystal Ir films a few nanometers thick which were prepared by pulsed laser deposition on sapphire wafers. These graphene layers have a single crystallographic orientation and a very low density of defects, as shown by diffraction, scanning tunnelling microscopy, and Raman spectroscopy. Their structural quality is as high as that of graphene produced on Ir bulk single crystals, i.e. much higher than on metal thin films used so far.

cond-mat.mtrl-sci↗

Twins and their boundaries during homoepitaxy on Ir(111)

The growth and annealing behavior of strongly twinned homoepitaxial films on Ir(111) has been investigated by scanning tunneling microscopy, low energy electron diffraction and surface X-ray diffraction. In situ surface X-ray diffraction during and after film growth turned out to be an efficient tool for the determination of twin fractions in multilayer films and to uncover the nature of side twin boundaries. The annealing of the twin structures is shown to take place in a two step process, reducing first the length of the boundaries between differently stacked areas and only then the twins themselves. A model for the structure of the side twin boundaries is proposed which is consistent with both the scanning tunneling microscopy and surface X-ray diffraction data.

cond-mat.mtrl-sci↗

Perpendicular anisotropy of ultrathin epitaxial cobalt films on graphene

Graphene is attractive for spintronics due to its long spin life time and high mobility. So far only thick and polycrystalline slabs have been used as ferromagnetic electrodes. We report the growth of flat, epitaxial ultrathin Co films on graphene. These display perpendicular magnetic anisotropy in the thickness range 0.5-1nm, which is confirmed by theory. PMA, epitaxy and ultrathin thickness bring new perspectives for graphene-based spintronic devices such as the zero-field control of an arbitrary magnetization direction, band matching between electrodes and graphene, and interface effects such as Rashba and electric field control of magnetism.

cond-mat.mtrl-sci↗

In situ observation of stress relaxation in epitaxial graphene

Upon cooling, branched line defects develop in epitaxial graphene grown at high temperature on Pt(111) and Ir(111). Using atomically resolved scanning tunneling microscopy we demonstrate that these defects are wrinkles in the graphene layer, i.e. stripes of partially delaminated graphene. With low energy electron microscopy (LEEM) we investigate the wrinkling phenomenon in situ. Upon temperature cycling we observe hysteresis in the appearance and disappearance of the wrinkles. Simultaneously with wrinkle formation a change in bright field imaging intensity of adjacent areas and a shift in the moire spot positions for micro diffraction of such areas takes place. The stress relieved by wrinkle formation results from the mismatch in thermal expansion coefficients of graphene and the substrate. A simple one-dimensional model taking into account the energies related to strain, delamination and bending of graphene is in qualitative agreement with our observations.

cond-mat.mes-hall↗

A versatile fabrication method for cluster superlattices

On the graphene moire on Ir(111) a variety of highly perfect cluster superlattices can be grown as shown is for Ir, Pt, W, and Re. Even materials that do not form cluster superlattices upon room temperature deposition may be grown into such by low temperature deposition or the application of cluster seeding through Ir as shown for Au, AuIr, FeIr. Criteria for the suitability of a material to form a superlattice are given and largely confirmed. It is proven that at least Pt and Ir even form epitaxial cluster superlattices. The temperature stability of the cluster superlattices is investigated and understood on the basis of positional fluctuations of the clusters around their sites of minimum potential energy. The binding sites of Ir, Pt, W and Re cluster superlattices are determined and the ability to cover samples macroscopically with a variety of superlattices is demonstrated.

cond-mat.mes-hall↗