arXiv subjects

Julien Woillez

Publications and source records attributed to Julien Woillez.

At least 19 recordsLinked to original sources

arXiv2026

GRAVITY+: reducing non-common-path aberrations for sub-10 {\mu}as astrometric accuracy

GRAVITY is a state-of-the-art instrument for near-infrared astrometric interferometry that routinely achieves astrometric accuracy of 30-100 microarcsecond in its phase-referenced dual-field mode. However, its fundamental limit is not yet reached, and can still be improved by several factors. In this paper, we focus on the effect of systematics, and in particular the effect of non-common path aberrations between the science channel and the metrology signal in the GRAVITY Fiber Coupler. Through comprehensive laboratory measurements using a dedicated fiber coupler replica and phase-shifting interferometry at 1908 nm, we have characterized these high-order wavefront errors with nanometer precision in the laboratory. We characterized on-sky the effect of these high-order wavefront imperfections on narrow-angle astrometry, using observations of the binary system GJ65. As part of the GRAVITY+ project, high-precision mirrors designed for nanometer-level surface quality, bringing an order of magnitude improvement over existing GRAVITY injection optics, are currently in production and will be installed in the fiber coupler units by the end of 2027. This upgrade is expected to enable astrometric accuracy at the sub-10 microarcsecond level in dual-field mode with integration times of just a few minutes.

astro-ph.IM↗

arXiv2026

ngVLTI: Cost and Feasibility of a Four-Telescope VLTI Expansion for Milliarcsecond-Scale Imaging

We assess the cost and technical feasibility of extending the Very Large Telescope Interferometer (VLTI) through the addition of four 8 m-class Unit Telescopes (UTs), an upgrade we refer to as the new generation VLTI (ngVLTI). Such an upgrade would provide a dense and homogeneous uv coverage with baselines up to 220 m, enabling true imaging at milliarcsecond angular resolution across science cases ranging from Solar System bodies to distant active galactic nuclei. Because each image is reconstructed at a single wavelength, repeating the reconstruction across the spectral channels of the instrument would deliver spectral-imaging cubes -- a qualitatively new capability for the VLTI, bringing it close to the imaging power of ALMA at near-infrared wavelengths. Motivated by this scientific case, we examine a compact telescope concept consisting of a fast ($f/0.64$), segmented, parabolic primary mirror feeding a subterranean coud\'e focus compatible with the existing VLTI infrastructure. We summarise the optical design, which achieves diffraction-limited performance over a 1 arcmin field of view and a well-matched reimaged pupil, discuss the mechanical trade-offs behind the choice of a 60-segment, 1.2 m primary -- a mirror mass of ~13.5 tons and an altitude moving mass of ~50 tons -- and quantify the gravitational flexure of the telescope structure and its resulting optical sensitivity as a function of pointing elevation. We then present a back-of-the-envelope cost estimate of order 80 MEuro per telescope (2026 prices), broken down into the segmented primary, adaptive secondary, coud\'e train, mount, enclosure, and ancillary instrumentation. The proposed upgrade appears both cost-competitive and technically achievable, offering a long-term perspective for Paranal Observatory in the ELT era.

astro-ph.IM↗

arXiv2026

Using VLTI/GRAVITY+ to determine the identity of a third planet candidate in the PDS 70 system

Detections of protoplanets are rare and protoplanetary disk features mischaracterized as planets are common. PDS 70 is one of only two stars known to host multiple confirmed protoplanets, PDS 70 b and c, and repeat detections of a third point-like source in the system suggest the presence of third inner planet. However, previous observations of this third source are insufficient to distinguish whether it is a planet or a concentrated dust clump in Keplerian motion. Our observations with VLTI/GRAVITY+ did not re-detect this point-like source, suggesting that it is, in fact, a dust clump and not a planet. These observations demonstrate how the angular resolving power of VLTI/GRAVITY+ can be used to distinguish between protoplanets and protoplanetary disk features.

astro-ph.EP↗

arXiv2026

Destructuring the disk of AB Aurigae: Dynamics and accretion

In this paper, we present near-IR polarized images of the AB Aur disk at three epochs spanning 3.85 years with SPHERE/IRDIS, as well as Halpha images obtained with SPHERE/ZIMPOL at a single epoch. The purpose of this study is to analyze the dynamics of the entire disk and of the various structures in near-IR polarimetry, and to identify sources of Halpha emission to derive constraints on their mass accretion rate. The dynamical study in the near-IR shows that the disk globally follows Keplerian rotation, but we observe a departure from this behavior at radii smaller than ~60au. At the smallest radius of ~25au, we measure a deviation from Keplerian rotation as large as ~12deg over 3.85 years, demonstrating sub-Keplerian rotation. The two bright spirals within the millimeter cavity have different dynamic trends, and we discuss their possible link with the identified planet candidates. We also discuss the implications of the non-Keplerian behavior, and we posit that it could be related to interactions with multiple protoplanets orbiting out of the disk plane on elliptical orbits. Furthermore, the orbital analysis of the compact sources (labeled f1, f2, and f3) suggests that their orbital planes are significantly inclined with respect to the disk plane by several tens of degrees. The variability of the shadows suggests that they are produced by optically thick regions located within ~60au. For the photometric analysis in Halpha, we derive a flux of about 8.22x10^{-15} erg/s/cm^2 for the entire feature f1, but only 6.46x10^{-16} erg/s/cm^2 at the location of AB Aur b, consistent with non-detection. If f1 were a point source and the accretion remained constant for 1Myr, it would correspond to ~5-20 Jupiter masses according to the magnetospheric accretion model or ~6-10 Jupiter masses according to the boundary layer accretion model.

astro-ph.EP↗

arXiv2025

GRAVITY+ adaptive optics (GPAO) tests in Europe

We present in this proceeding the results of the test phase of the GRAVITY+ adaptive optics. This extreme AO will enable both high-dynamic range observations of faint companions (including exoplanets) thanks to a 40x40 sub-apertures wavefront control, and sensitive observations (including AGNs) thanks to the addition of a laser guide star to each UT of the VLT. This leap forward is made thanks to a mostly automated setup of the AO, including calibration of the NCPAs, that we tested in Europe on the UT+atmosphere simulator we built in Nice. We managed to reproduce in laboratory the expected performances of all the modes of the AO, including under non-optimal atmospheric or telescope alignment conditions, giving us the green light to proceed with the Assembly, Integration and Verification phase in Paranal.

astro-ph.IM↗

arXiv2024

Improving constraints on the extended mass distribution in the Galactic Center with stellar orbits

Studying the orbital motion of stars around Sagittarius A* in the Galactic Center provides a unique opportunity to probe the gravitational potential near the supermassive black hole at the heart of our Galaxy. Interferometric data obtained with the GRAVITY instrument at the Very Large Telescope Interferometer (VLTI) since 2016 has allowed us to achieve unprecedented precision in tracking the orbits of these stars. GRAVITY data have been key to detecting the in-plane, prograde Schwarzschild precession of the orbit of the star S2, as predicted by General Relativity. By combining astrometric and spectroscopic data from multiple stars, including S2, S29, S38, and S55 - for which we have data around their time of pericenter passage with GRAVITY - we can now strengthen the significance of this detection to an approximately $10 σ$ confidence level. The prograde precession of S2's orbit provides valuable insights into the potential presence of an extended mass distribution surrounding Sagittarius A*, which could consist of a dynamically relaxed stellar cusp comprised of old stars and stellar remnants, along with a possible dark matter spike. Our analysis, based on two plausible density profiles - a power-law and a Plummer profile - constrains the enclosed mass within the orbit of S2 to be consistent with zero, establishing an upper limit of approximately $1200 \, M_\odot$ with a $1 σ$ confidence level. This significantly improves our constraints on the mass distribution in the Galactic Center. Our upper limit is very close to the expected value from numerical simulations for a stellar cusp in the Galactic Center, leaving little room for a significant enhancement of dark matter density near Sagittarius A*.

astro-ph.GA↗

arXiv2024

VLTI Unit Telescope coudé train vibration control upgrade for GRAVITY+

Scaling up interferometry to 8m collectors should smooth-out the optical piston perturbations and allow a slow fringe tracker to obtain high precision correction on faint targets. In practice, the GRAVITY fringe tracker still observes high frequency OPD components that limit the exposure time, its precision and limiting magnitude. Perturbations seem to come from mechanical vibrations in the train of mirrors. As part of the GRAVITY+ efforts, accelerometers were added to all the mirrors of the coudé train to compensate in real-time the optical path using the main delay lines. We show their effectiveness on vibrations peaks between 40 and 200Hz and outline prospects for the upgrade of the deformable mirrors and the beam-compressor differential delay lines.

astro-ph.IM↗

arXiv2024

L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans

NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.

astro-ph.IM↗

arXiv2023

Integrated turbulence parameters' estimation from NAOMI adaptive optics telemetry data

Monitoring turbulence parameters is crucial in high-angular resolution astronomy for various purposes, such as optimising adaptive optics systems or fringe trackers. The former are present at most modern observatories and will remain significant in the future. This makes them a valuable complementary tool for the estimation of turbulence parameters. The feasibility of estimating turbulence parameters from low-resolution sensors remains untested. We perform seeing estimates for both simulated and on-sky telemetry data sourced from the new adaptive optics module installed on the four Auxiliary Telescopes of the Very Large Telescope Interferometer. The seeing estimates are obtained from a modified and optimised algorithm that employs a chi-squared modal fitting approach to the theoretical von Kármán model variances. The algorithm is built to retrieve turbulence parameters while simultaneously estimating and accounting for the remaining and measurement error. A Monte Carlo method is proposed for the estimation of the statistical uncertainty of the algorithm. The algorithm is shown to be able to achieve per cent accuracy in the estimation of the seeing with a temporal horizon of 20s on simulated data. A 0.76" +/- 1.2%$|_\mathrm{stat}$ +/- 1.2%$|_\mathrm{sys}$ median seeing was estimated from on-sky data collected from 2018 and 2020. The spatial distribution of the Auxiliary Telescopes across the Paranal Observatory was found to not play a role in the value of the seeing.

astro-ph.IM↗

arXiv2022

Impact of water vapor seeing on mid-infrared high-contrast imaging at ELT scale

The high-speed variability of the local water vapor content in the Earth atmosphere is a significant contributor to ground-based wavefront quality throughout the infrared domain. Unlike dry air, water vapor is highly chromatic, especially in the mid-infrared. This means that adaptive optics correction in the visible or near-infrared domain does not necessarily ensure a high wavefront quality at longer wavelengths. Here, we use literature measurements of water vapor seeing, and more recent infrared interferometric data from the Very Large Telescope Interferometer (VLTI), to evaluate the wavefront quality that will be delivered to the METIS mid-infrared camera and spectrograph for the Extremely Large Telescope (ELT), operating from 3 to 13 μm, after single-conjugate adaptive optics correction in the near-infrared. We discuss how the additional wavefront error due to water vapor seeing is expected to dominate the wavefront quality budget at N band (8-13 μm), and therefore to drive the performance of mid-infrared high-contrast imaging modes at ELT scale. Then we present how the METIS team is planning to mitigate the effect of water vapor seeing using focal-plane wavefront sensing techniques, and show with end-to-end simulations by how much the high-contrast imaging performance can be improved.

astro-ph.IM↗

arXiv2022

Towards a Better Understanding of OPD Limitations for Higher Sensitivity and Contrast at the VLTI

Precise control of the optical path differences (OPD) in the Very Large Telescope Interferometer (VLTI) was critical for the characterization of the black hole at the center of our Galaxy - leading to the 2020 Nobel prize in physics. There is now significant effort to push these OPD limits even further, in-particular achieving 100nm OPD RMS on the 8m unit telescopes (UT's) to allow higher contrast and sensitivity at the VLTI. This work calculated the theoretical atmospheric OPD limit of the VLTI as 5nm and 15nm RMS, with current levels around 200nm and 100nm RMS for the UT and 1.8m auxillary telescopes (AT's) respectively, when using bright targets in good atmospheric conditions. We find experimental evidence for the $f^{-17/3}$ power law theoretically predicted from the effect of telescope filtering in the case of the ATs which is not currently observed for the UT's. Fitting a series of vibrating mirrors modelled as dampened harmonic oscillators, we were able to model the UT OPD PSD of the gravity fringe tracker to $<1nm/\sqrt{Hz}$ RMSE up to 100Hz, which could adequately explain a hidden $f^{-17/3}$ power law on the UTs. Vibration frequencies in the range of 60-90Hz and also 40-50Hz were found to generally dominate the closed loop OPD residuals of Gravity. Cross correlating accelerometer with Gravity data, it was found that strong contributions in the 40-50Hz range are coming from the M1-M3 mirrors, while a significant portion of power from the 60-100Hz contributions are likely coming from between the M4-M10. From the vibrating mirror model it was shown that achieving sub 100nm OPD RMS for particular baselines (that have OPD$\sim$200nm RMS) required removing nearly all vibration sources below 100Hz.

astro-ph.IM↗

arXiv2022

Building a GRAVITY+ Adaptive Optics Test Bench

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coud{é} focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coud{é} room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

astro-ph.IM↗

arXiv2022

Locating dust and molecules in the inner circumstellar environment of R~Sculptoris with MATISSE

AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbon star R Scl with the VLTI-MATISSE instrument in L- and N-bands. The high angular resolution of the VLTI observations, combined with a large uv-plane coverage allowed us to use image reconstruction methods. To constrain the dust and molecules' location, we used two different methods: MIRA image reconstruction and the 1D code RHAPSODY. We found evidence of C2H2 and HCN molecules between 1 and 3.4 Rstar which is much closer to the star than the location of the dust (between 3.8 and 17.0 Rstar). We also estimated a mass-loss rate of 1.2+-0.4x10-6 Msun per yr. In the meantime, we confirmed the previously published characteristics of a thin dust shell, composed of amorphous carbon (amC) and silicon carbide (SiC). However, no clear SiC feature has been detected in the MATISSE visibilities. This might be caused by molecular absorption that can affect the shape of the SiC band at 11.3 micron. The appearance of the molecular shells is in good agreement with predictions from dynamical atmosphere models. For the first time, we co-located dust and molecules in the environment of an AGB star. We confirm that the molecules are located closer to the star than the dust. The MIRA images unveil the presence of a clumpy environment in the fuzzy emission region beyond 4.0 Rstar. Furthermore, with the available dynamic range and angular resolution, we did not detect the presence of a binary companion. Additional observations combining MATISSE and SAM-VISIR instrument should enable this detection in future studies.

astro-ph.SR↗

arXiv2022

L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans

Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.

astro-ph.IM↗

arXiv2022

The dusty heart of Circinus: I. Imaging the circumnuclear dust in N-band

Active galactic nuclei play a key role in the evolution of galaxies, but their inner workings and physical connection to the host are poorly understood due to a lack of angular resolution. Infrared interferometry makes it possible to resolve the circumnuclear dust in the nearby Seyfert 2 galaxy, Circinus. Previous observations have revealed complex structures and polar dust emission but interpretation was limited to simple models. MATISSE makes it possible to image these structures for the first time. We observed the Circinus Galaxy with VLTI/MATISSE, producing 150 correlated flux spectra and 100 closure phase spectra. We reconstructed images in the N-band at ~10 mas resolution. We fit blackbody functions with dust extinction to several aperture-extracted fluxes from the images to produce a temperature distribution of central dusty structures. We find significant substructure in the circumnuclear dust: central unresolved flux of ~0.5 Jy, a thin disk 1.9 pc in diameter oriented along ~45 deg,and a ~4x1.5 pc polar emission extending orthogonal to the disk. The polar emission exhibits patchiness, which we attribute to clumpy dust. Flux enhancements to the east and west of the disk are seen for the first time. We distinguish the temperature profiles of the disk and of the polar emission: the disk shows a steep temperature gradient indicative of denser material; the polar profile is flatter, indicating clumpiness and/or lower dust density. The unresolved flux is fitted with a high temperature, ~370 K. The polar dust remains warm (~200 K) out to 1.5 pc from the disk. The recovered morphology and temperature distribution resembles modeling of accretion disks with radiation-driven winds at large scales, but we placed new constraints on the subparsec dust. The subparsec features imaged here place new constraints on the physical modeling of circumnuclear dust in active galaxies.

astro-ph.GA↗

arXiv2021

Thermal imaging of dust hiding the black hole in the Active Galaxy NGC 1068

In the widely accepted 'Unified Model' solution of the classification puzzle of Active Galactic Nuclei, the orientation of a dusty accretion torus around the central black hole dominates their appearance. In 'type-1' systems, the bright nucleus is visible at the centre of a face-on torus. In 'type-2' systems the thick, nearly edge-on torus hides the central engine. Later studies suggested evolutionary effects and added dusty clumps and polar winds but left the basic picture intact. However, recent high-resolution images of the archetypal type-2 galaxy NGC 1068 suggested a more radical revision. They displayed a ring-like emission feature which the authors advocated to be hot dust surrounding the black hole at the radius where the radiation from the central engine evaporates the dust. That ring is too thin and too far tilted from edge-on to hide the central engine, and ad hoc foreground extinction is needed to explain the type-2 classification. These images quickly generated reinterpretations of the type 1-2 dichotomy. Here we present new multi-band mid-infrared images of NGC1068 that detail the dust temperature distribution and reaffirm the original model. Combined with radio data, our maps locate the central engine below the previously reported ring and obscured by a thick, nearly edge-on disk, as predicted by the Unified Model. We also identify emission from polar flows and absorbing dust that is mineralogically distinct from that towards the Milky Way centre.

astro-ph.GA↗

arXiv2021

P-REx II. Off-line Performance on VLTI/GRAVITY

For sensitive optical interferometry, it is crucial to control the evolution of the optical path difference (OPD) of the wavefront between the individual telescopes of the array. The OPD between a pair of telescopes is induced by differential optical properties such as atmospheric refraction, telescope alignment, etc. This has classically been measured using a fringe tracker that provides corrections to a piston actuator to account for this difference. An auxiliary method, known as the Piston Reconstruction Experiment (P-REx) has been developed to measure the OPD, or differential 'piston' of the wavefront, induced by the atmosphere at each telescope. Previously, this method was outlined and results obtained from LBT adaptive optics (AO) data for a single telescope aperture were presented. P-REx has now been applied off-line to previously acquired VLT's GRAVITY CIAO wavefront sensing data to estimate the atmospheric OPD for the six VLTI baselines. Comparisons with the OPD obtained from the VLTI GRAVITY fringe tracker were made. The results indicate that the telescope and instrumental noise of the combined VLTI and GRAVITY systems dominate over the atmospheric turbulence contributions. However, good agreement between simulated and on-sky P-REx data indicates that if the telescope and instrumental noise were reduced to atmospheric piston noise levels, P-REx has the potential to reduce the OPD root mean square of piston turbulence by up to a factor of 10 for frequencies down to 1 Hz. In such conditions, P-REx will assist in pushing the sensitivity limits of optical fringe tracking with long baseline interferometers.

astro-ph.IM↗

arXiv2020

Betelgeuse scope: Single-mode-fibers-assisted optical interferometer design for dedicated stellar activity monitoring

Betelgeuse has gone through a sudden shift in its brightness and dimmed mysteriously. This is likely caused by a hot blob of plasma ejected from Betelgeuse and then cooled to obscuring dust. If true, it is a remarkable opportunity to directly witness the formation of dust around a red supergiant star. Today's optical telescope facilities are not optimized for time-evolution monitoring of the Betelgeuse surface, so in this work, we propose a low-cost optical interferometer. The facility will consist of $12 \times 4$ inch optical telescopes mounted on the surface of a large radio dish for interferometric imaging; polarization-maintaining single-mode fibers will carry the coherent beams from the individual optical telescopes to an all-in-one beam combiner. A fast steering mirror assisted fiber injection system guides the flux into fibers. A metrology system senses vibration-induced piston errors in optical fibers, and these errors are corrected using fast-steering delay lines. We will present the design.

astro-ph.IM↗