arXiv subjects

Junxi Wang

Publications and source records attributed to Junxi Wang.

23 records · Page 2Linked to original sources

arXiv2019

AlN/beta-Ga2O3 based HEMT: a potential pathway to ultimate high power device

Gallium Oxide (Ga2O3) has a huge potential on the power device for its high breakdown filed and good transport properties. beta-Ga2O3 as the thermodynamics stable phase, has been demonstrated to form high electron mobility transistor (HEMT) through delta-doping in the barrier due to its none-polar property. Following the development in III-V HEMT which turns from delta-doping-induced to polarization-induced 2DEG, an alternative method based on III-N materials/beta-Ga2O3 heterostructure is proposed that utilizing the polarization difference on the interface. Further requirements of electric field and conduction band difference show that only nitrogen (N)-polar AlN on beta-Ga2O3 can form the channel and hold large 2DEG concentration on the interface. Compared with conventional metal-polar AlN/GaN HEMT, the proposed N-polar AlN/beta-Ga2O3 HEMT show a much larger 2DEG concentration, the spontaneous-polarization-dominated electric field, better DC output performance, as well as higher breakdown voltage. This study provides a new research approach that shifting from delta-doping-induced to polarization-induced on beta-Ga2O3-based HEMT, which can also be a guideline for community excavating the application potential of Ga2O3.

physics.app-ph↗

arXiv2018

17,000 %/W Second Harmonic Conversion Efficiency in Single Crystalline Aluminum Nitride Microresonators

High quality factor optical microcavities have been employed in a variety of material systems to enhance nonlinear optical interactions. While single-crystalline aluminum nitride microresonators have recently emerged as a low loss platform for integrated nonlinear optics such as four wave mixing and Raman lasing, few studies have investigated this material for second-harmonic generation. In this Letter, we demonstrate an optimized fabrication of dually-resonant phase-matched ring resonators from epitaxial aluminum nitride thin films. An unprecendented second-harmonic generation efficiency of 17,000%/W is obtained in the low power regime and pump depletion is observed at a relatively low input power of 3.5 mW. This poses epitaxial aluminum nitride as the highest efficiency second-harmonic generator among current integrated platforms.

physics.optics↗

arXiv2018

Ultra-high-Q UV microring resonators based on single-crystalline AlN platform

Development of low-loss photonic components in the ultraviolet (UV) band will open new prospects for classical and quantum optics. Compared with other integrated platforms, aluminum nitride (AlN) is particularly attractive as it features an enormous bandgap of ~6.2 eV and intrinsic chi(2) and chi(3) susceptibilities. In this work, we demonstrate a record quality factor of 2.1 x 105 (optical loss ~ 8 dB/cm) at 390 nm based on single-crystalline AlN microrings. The low-loss AlN UV waveguide represents a significant milestone toward UV photonic integrated circuits as it features full compatibility for future incorporation of AlGaN-based UV emitters and receivers. On-chip UV spectroscopy, nonlinear optics and quantum information processing can also be envisioned.

physics.app-ph↗

arXiv2016

Broadband frequency comb generation in aluminum nitride-on-sapphire microresonators

Development of chip-scale optical frequency comb with the coverage from ultra-violet (UV) to mid-infrared (MIR) wavelength is of great significance. To expand the comb spectrum into the challenging UV region, a material platform with high UV transparency is crucial. In this paper, crystalline aluminum nitride (AlN)-onsapphire film is demonstrated for efficient Kerr frequency comb generation. Near-infrared (NIR) comb with nearly octave-spanning coverage and low parametric threshold is achieved in continuous-wave pumped high-quality-factor AlN microring resonators. The competition between stimulated Raman scattering (SRS) and hyperparametric oscillation is investigated, along with broadband comb generation via Raman-assisted four-wave mixing (FWM). Thanks to its wide bandgap, excellent crystalline quality as well as intrinsic quadratic and cubic susceptibilities, AlN-on-sapphire platform should be appealing for integrated nonlinear optics from MIR to UV region.

physics.optics↗

arXiv2016

Continuous-wave Raman Lasing in Aluminum Nitride Microresonators

We report the first investigation on continuous-wave Raman lasing in high-quality-factor aluminum nitride (AlN) microring resonators. Although wurtzite AlN is known to exhibit six Raman-active phonons, single-mode Raman lasing with low threshold and high slope efficiency is demonstrated. Selective excitation of A$_1^\mathrm{TO}$ and E$_2^\mathrm{high}$ phonons with Raman shifts of $\sim$612 and 660 cm$^{-1}$ is observed by adjusting the polarization of the pump light. A theoretical analysis of Raman scattering efficiency within ${c}$-plane (0001) of AlN is carried out to help account for the observed lasing behavior. Bidirectional lasing is experimentally confirmed as a result of symmetric Raman gain in micro-scale waveguides. Furthermore, second-order Raman lasing with unparalleled output power of $\sim$11.3 mW is obtained, which offers the capability to yield higher order Raman lasers for mid-infrared applications.

physics.optics↗