arXiv subjects

Kaihui Liu

Publications and source records attributed to Kaihui Liu.

At least 37 records · Page 2Linked to original sources

arXiv2024

Rapid infrared imaging for rhombohedral graphene

The extrinsic stacking sequence based on intrinsic crystal symmetry in multilayer two-dimensional materials plays a significant role in determining their electronic and optical properties. Compared with Bernal-stacked (ABA) multilayer graphene, rhombohedral (ABC) multilayer graphene hosts stronger electron-electron interaction due to its unique dispersion at low-energy excitations and has been utiliazed as a unique platform to explore strongly correlated physics. However, discerning the stacking sequence has always been a quite time-consuming process by scanning mapping methods. Here, we report a rapid recognition method for ABC- stacked graphene with high accuracy by infrared imaging based on the distinct optical responses at infrared range. The optical contrast of the image between ABC and ABA stacked graphene is strikingly clear, and the discernibility is comparable to traditional optical Raman microscopy but with higher consistency and throughput. We further demonstrate that the infrared imaging technique can be integrated with dry transfer techniques commonly used in the community. This rapid and convenient infrared imaging technique will significantly improve the sorting efficiency for differently stacked multilayer graphene, thereby accelerating the exploration of the novel emergent correlated phenomena in ABC stacked graphene.

cond-mat.mes-hall↗

arXiv2024

Phonon heat conduction across slippery interfaces in twisted graphite

Interlayer rotation in van der Waals (vdW) materials offers great potential for manipulating phonon dynamics and heat flow in advanced electronics with ever higher compactness and power density. However, despite extensive theoretical efforts in recent years, experimental measurements remain scarce especially due to the critical challenges of preparing single-crystalline twisted interfaces and probing interfacial thermal transport with sufficient resolution. Here, we exploited the intrinsic twisted interfaces in highly oriented pyrolytic graphite (HOPG). By developing novel experimental schemes based on microfabricated mesas, we managed to achieve simultaneous mechanical characterizations and thermal measurements. In particular, we pushed the HOPG mesas with a microprobe to identify and rotate single-crystalline intrinsic interfaces owing to their slippery nature as is well known in structural superlubricity. Remarkably, we observed over 30-fold suppression of thermal conductance for the slippery interfaces by using epitaxial graphite as a control. Nonetheless, the interfacial conductance remains around 600 $\mathrm{MWm^{-2}K^{-1}}$ which surpasses the highest values for artificially stacked vdW structures by more than five times. Further, atomic simulations revealed the predominant role of the transverse acoustic phonons. Together, our findings highlight a general physical picture that directly correlates interfacial thermal transport with sliding resistance, and lay the foundation for twist-enabled thermal management which are particularly beneficial to twistronics and slidetronics.

cond-mat.mes-hall↗

arXiv2024

Correlated Charge Density Wave Insulators in Chirally Twisted Triple Bilayer Graphene

Electrons residing in flat-band system can play a vital role in triggering spectacular phenomenology due to relatively large interactions and spontaneous breaking of different degeneracies. In this work we demonstrate chirally twisted triple bilayer graphene, a new moiré structure formed by three pieces of helically stacked Bernal bilayer graphene, as a highly tunable flat-band system. In addition to the correlated insulators showing at integer moiré fillings, commonly attributed to interaction induced symmetry broken isospin flavors in graphene, we observe abundant insulating states at half-integer moiré fillings, suggesting a longer-range interaction and the formation of charge density wave insulators which spontaneously break the moiré translation symmetry. With weak out-of-plane magnetic field applied, as observed half-integer filling states are enhanced and more quarter-integer filling states appear, pointing towards further quadrupling moiré unit cells. The insulating states at fractional fillings combined with Hartree-Fock calculations demonstrate the observation of a new type of correlated charge density wave insulators in graphene and points to a new accessible twist manner engineering correlated moiré electronics.

cond-mat.mes-hall↗

arXiv2024

Layer-by-layer connection for large area single crystal boron nitride multilayer films

Boron nitride (BN) is today considered as one of the most promising materials for many novel applications including bright single photon emission, deep UV opto-electronics, small sized solid-state neutron detector, and high-performance two-dimensional materials, etc. Despite the recent successful fabrication of large-area BN single-crystals (typically <= 5 atomic layers), the scalable growth of thicker single-crystalline BN films still constitutes a great challenge. In this work, we demonstrate an approach to grow large-area multilayer single-crystal BN films by chemical vapor deposition on face-centered cubic Fe-Ni (111) single crystal alloy thin films with different stoichiometric phases. We show that the BN growth is greatly tunable and improved by increasing the Fe content in single-crystal Fe-Ni (111). The formation of pyramid-shaped multilayer BN domains with aligned orientation enables a continuous connection following a layer-by-layer, 'first-meet-first-connect', mosaic stitching mechanism. By means of selected area electron diffraction, micro-photoluminescence spectroscopy in the deep UV and high-resolution transmission electron microscopy, the layer-by-layer connection mechanism is unambiguously evidenced, and the stacking order has been verified to occur as unidirectional AB and ABC stackings, i.e., in the Bernal and rhombohedral BN phase.

cond-mat.mtrl-sci↗

arXiv2024

Unveiling the origin of unconventional moire ferroelectricity

Interfacial ferroelectricity emerges in heterostructures consisting of nonpolar van der Waals (vdW) layers, greatly expanding the scope of two dimensional ferroelectrics. In particular, the unconventional moire ferroelectricity observed in bilayer graphene/boron nitride (BN) heterostructures, exhibits promising functionalities with topological current, superconductivity and synaptic responses. However, the debate about its mechanism - correlation driven charge transfer between two graphene layers - limits device reproducibility and hence large-scale production. Here by designing a single-layer graphene encapsulated by lattice-mismatched WSe2, we identify the ferroelectricity as stemming from - instead of graphene moire bands - the particular BN, where interfacial sliding ferroelectricity must play a role. With similar structures, multilayer twisted MoS2 is found to reproduce the ferroelectricity. The key is a conductive moire ferroelectric, where the screened gate and the pinned domain wall together result in unchanged electronic states, i.e. anomalous screening. The intimate connection to interfacial sliding ferroelectricity thus provides advantages of diverse choices of constituent materials and robust polarization switching while preserving the unique anomalous screening, paving the way to reproducible and reliable memory-based devices in artificial intelligence.

cond-mat.mtrl-sci↗

arXiv2024

Sliding ferroelectric memories and synapses

Ferroelectric materials with switchable electric polarization hold great promise for a plethora of emergent applications, such as post-Moore's law nanoelectronics, beyond-Boltzmann transistors, non-volatile memories, and above-bandgap photovoltaic devices. Recent advances have uncovered an exotic sliding ferroelectric mechanism, which endows to design atomically thin ferroelectrics from non-ferroelectric parent monolayers. Although notable progress has been witnessed in understanding its fundamental properties, functional devices based on sliding ferroelectrics, the key touchstone toward applications, remain elusive. Here, we demonstrate the rewritable, non-volatile memory devices at room-temperature utilizing a two-dimensional (2D) sliding ferroelectric semiconductor of rhombohedral-stacked bilayer molybdenum disulfide. The 2D sliding ferroelectric memories (SFeMs) show superior performances with a large memory window of >8V, a high conductance ratio of above 106, a long retention time of >10 years, and a programming endurance greater than 104 cycles. Remarkably, flexible SFeMs are achieved with state-of-the-art performances competitive to their rigid counterparts and maintain their performances post bending over 103 cycles. Furthermore, synapse-specific Hebbian forms of plasticity and image recognition with a high accuracy of 97.81% are demonstrated based on flexible SFeMs. Our work demonstrates the sliding ferroelectric memories and synaptic plasticity on both rigid and flexible substrates, highlighting the great potential of sliding ferroelectrics for emerging technological applications in brain-inspired in-memory computing, edge intelligence and energy-efficient wearable electronics.

cond-mat.mes-hall↗

arXiv2023

Room-temperature orbit-transfer torque enabling van der Waals magnetoresistive memories

The nonvolatile magnetoresistive random access memory (MRAM) is believed to facilitate emerging applications, such as in memory computing, neuromorphic computing and stochastic computing. Two dimensional (2D) materials and their van der Waals heterostructures promote the development of MRAM technology, due to their atomically smooth interfaces and tunable physical properties. Here we report the all-2D magnetoresistive memories featuring all electrical data reading and writing at room temperature based on WTe2/Fe3GaTe2/BN/Fe3GaTe2 heterostructures. The data reading process relies on the tunnel magnetoresistance of Fe3GaTe2/BN/Fe3GaTe2. The data writing is achieved through current induced polarization of orbital magnetic moments in WTe2, which exert torques on Fe3GaTe2, known as the orbit transfer torque (OTT) effect. In contrast to the conventional reliance on spin moments in spin transfer torque and spin orbit torque, the OTT effect leverages the natural out of plane orbital moments, facilitating field-free perpendicular magnetization switching through interface currents. Our results indicate that the emerging OTT MRAM is promising for low power, high performance memory applications.

cond-mat.mes-hall↗

arXiv2023

Growth and applications of two-dimensional single crystals

Two-dimensional (2D) materials have received extensive research attentions over the past two decades due to their intriguing physical properties (such as the ultrahigh mobility and strong light-matter interaction at atomic thickness) and a broad range of potential applications (especially in the fields of electronics and optoelectronics). The growth of single-crystal 2D materials is the prerequisite to realize 2D-based high-performance applications. In this review, we aim to provide an in-depth analysis of the state-of-the-art technology for the growth and applications of 2D materials, with particular emphasis on single crystals. We first summarize the major growth strategies for monolayer 2D single crystals. Following that, we discuss the growth of multilayer single crystals, including the control of thickness, stacking sequence, and heterostructure composition. Then we highlight the exploration of 2D single crystals in electronic and optoelectronic devices. Finally, a perspective is given to outline the research opportunities and the remaining challenges in this field.

cond-mat.mtrl-sci↗

arXiv2023

Giant nonlinear optical wave mixing in van der Waals compound MnPSe3

Optical nonlinearities, one of the most fascinating properties of two-dimensional (2D) materials, are essential for exploring novel physics in 2D systems and developing next-generation nonlinear optical applications. While tremendous efforts have been made to discover and optimize second-order nonlinear optical responses in various 2D materials, higher odd-order nonlinear processes, which are in general much less efficient than second order ones, have been paid less attention despite their scientific and applicational significance. Here we report giant odd-order nonlinear optical wave mixing in a correlated van der Waals insulator MnPSe3 at room temperature. Illuminated by two near-infrared femtosecond lasers simultaneously, it generates a series of degenerate and non-degenerate four- and six-wave mixing outputs, with conversion efficiencies up to the order of $10^{-4}$ and $10^{-6}$ for the four- and six-wave mixing processes, respectively, far exceeding the efficiencies of several prototypical nonlinear optical materials (GaSe, LiNbO3). This work highlights the intriguing prospect of transition metal phosphorous trichalcogenides for future research of the nonlinear light matter interactions in 2D systems and for potential nonlinear photonic applications.

physics.optics↗

arXiv2023

Graphene/silicon heterojunction for reconfigurable phase-relevant activation function in coherent optical neural networks

Optical neural networks (ONNs) herald a new era in information and communication technologies and have implemented various intelligent applications. In an ONN, the activation function (AF) is a crucial component determining the network performances and on-chip AF devices are still in development. Here, we first demonstrate on-chip reconfigurable AF devices with phase activation fulfilled by dual-functional graphene/silicon (Gra/Si) heterojunctions. With optical modulation and detection in one device, time delays are shorter, energy consumption is lower, reconfigurability is higher and the device footprint is smaller than other on-chip AF strategies. The experimental modulation voltage (power) of our Gra/Si heterojunction achieves as low as 1 V (0.5 mW), superior to many pure silicon counterparts. In the photodetection aspect, a high responsivity of over 200 mA/W is realized. Special nonlinear functions generated are fed into a complex-valued ONN to challenge handwritten letters and image recognition tasks, showing improved accuracy and potential of high-efficient, all-component-integration on-chip ONN. Our results offer new insights for on-chip ONN devices and pave the way to high-performance integrated optoelectronic computing circuits.

physics.optics↗

arXiv2023

Twist-phase-matching in two-dimensional materials

Optical phase-matching involves establishing a proper phase relationship between the fundamental and generated waves to enable efficient optical parametric processes. It is typically achieved through either birefringence or periodically assigned polarization. Here, we report that twist angle in two-dimensional (2D) materials can generate a nonlinear Berry optical phase to compensate the phase mismatch in the process of nonlinear optical frequency conversion, and the vertical assembly of 2D layers with a proper twist sequence will generate a nontrivial "twist-phase-matching" (twist-PM) regime. The twist-PM model offers superior flexibility in the design of optical crystals, which works for twisted layers with either periodic or random thickness distribution. The designed crystals from twisted rhombohedra boron nitride films give rise to a second-harmonic generation conversion efficiency of ~8% within a thickness of only 3.2 um, and a facile polarization controllability that is absent in conventional crystals (from linear to left-/right-handed circular/elliptical polarizations). Our methodology establishes a platform for the rational designing and atomic manufacturing of nonlinear optical crystals based on abundant 2D materials for various functionalities.

physics.optics↗

arXiv2023

Control over Berry Curvature Dipole with Electric Field in WTe2

Berry curvature dipole plays an important role in various nonlinear quantum phenomena. However, the maximum symmetry allowed for nonzero Berry curvature dipole in the transport plane is a single mirror line, which strongly limits its effects in materials. Here, via probing the nonlinear Hall effect, we demonstrate the generation of Berry curvature dipole by applied dc electric field in WTe2, which is used to break the symmetry constraint. A linear dependence between the dipole moment of Berry curvature and the dc electric field is observed. The polarization direction of the Berry curvature is controlled by the relative orientation of the electric field and crystal axis, which can be further reversed by changing the polarity of the dc field. Our Letter provides a route to generate and control Berry curvature dipole in broad material systems and to facilitate the development of nonlinear quantum devices.

cond-mat.mtrl-sci↗

arXiv2022

Phonon transition across an isotopic interface

Natural materials usually consist of isotopic mixtures, for which different isotopic ratios can lead to distinct material properties such as thermal conductivity and nucleation process. However, the knowledge of isotopic interface remains largely unexplored mainly due to the challenges in isotopic identification and property measurement at an atomic scale. Here, by using monochromated electron energy-loss spectroscopy in a scanning transmission electron microscope, we reveal momentum-transfer-dependent lattice vibration behavior at an artificial h-10BN/h-11BN heterostructure with sub-unit-cell resolution. We find the vibrational energy changes across the isotopic interface gradually, featuring a wide transition regime, which suggests strong delocalization of the out-of-plane optical phonons at the interface. In addition, we identify phonons near the Brillouin zone center have a transition regime ~3.34 nm (10 atomic layers), whereas phonons at the Brillouin zone boundary transition in ~1.66 nm (5 atomic layers). We propose that the isotope-induced charge effect at the interface accounts for the distinct delocalization behavior. Moreover, intra-atomic layer variation of vibration energy is also sensitive to the momentum transfer, thus at the interface it depends on both of momentum transfer and mass change. The revealed lattice vibration behavior at an isotopic interface provides new insights to understand the isotopic effects on properties in natural materials.

cond-mat.mtrl-sci↗

arXiv2022

Tunable Interband Transitions in Twisted h-BN/Graphene Heterostructures

In twisted h-BN/graphene heterostructures, the complex electronic properties of the fast-traveling electron gas in graphene are usually considered to be fully revealed. However, the randomly twisted heterostructures may also have unexpected transition behaviors, which may influence the device performance. Here, we study the twist angle-dependent coupling effects of h-BN/graphene heterostructures using monochromatic electron energy loss spectroscopy. We find that the moiré potentials alter the band structure of graphene, resulting in a redshift of the intralayer transition at the M-point, which becomes more pronounced up to 0.25 eV with increasing twist angle. Furthermore, the twisting of the Brillouin zone of h-BN relative to the graphene M-point leads to tunable vertical transition energies in the range of 5.1-5.6 eV. Our findings indicate that twist-coupling effects of van der Waals heterostructures should be carefully considered in device fabrications, and the continuously tunable interband transitions through the twist angle can serve as a new degree of freedom to design optoelectrical devices.

cond-mat.mes-hall↗

arXiv2022

Strong Second Harmonic Generation from Bilayer Graphene with Symmetry Breaking by Redox-Governed Charge Doping

Missing second-order nonlinearity in centrosymmetric graphene overshadows its intriguing optical attribute. Here, we report redox-governed charge doping could effectively break the centrosymmetry of bilayer graphene (BLG), enabling a strong second harmonic generation (SHG) with a strength close to that of the well-known monolayer MoS2. Verified from control experiments with in situ electrical current annealing and electrically gate-controlled SHG, the required centrosymmetry breaking of the emerging SHG arises from the charge-doping on the bottom layer of BLG by the oxygen/water redox couple. Our results not only reveal that charge doping is an effective way to break the inversion symmetry of BLG despite its strong interlayer coupling but also indicate that SHG spectroscopy is a valid technique to probe molecular doping on two-dimensional materials.

physics.optics↗

arXiv2022

Layer-by-layer growth of bilayer graphene single-crystals enabled by self-transmitting catalytic activity

Direct growth of large-area vertically stacked two-dimensional (2D) van der Waal (vdW) materials is a prerequisite for their high-end applications in integrated electronics, optoelectronics and photovoltaics. Currently, centimetre- to even metre-scale monolayers of single-crystal graphene (MLG) and hexagonal boron nitride (h-BN) have been achieved by epitaxial growth on various single-crystalline substrates. However, in principle, this success in monolayer epitaxy seems extremely difficult to be replicated to bi- or few-layer growth, as the full coverage of the first layer was believed to terminate the reactivity of those adopting catalytic metal surfaces. Here, we report an exceptional layer-by-layer chemical vapour deposition (CVD) growth of large size bi-layer graphene single-crystals, enabled by self-transmitting catalytic activity from platinum (Pt) surfaces to the outermost graphene layers. In-situ growth and real-time surveillance experiments, under well-controlled environments, unambiguously verify that the growth does follow the layer-by-layer mode on open surfaces of MLG/Pt(111). First-principles calculations indicate that the transmittal of catalytic activity is allowed by an appreciable electronic hybridisation between graphene overlayers and Pt surfaces, enabling catalytic dissociation of hydrocarbons and subsequently direct graphitisation of their radicals on the outermost sp2 carbon surface. This self-transmitting catalytic activity is also proven to be robust for tube-furnace CVD in fabricating single-crystalline graphene bi-, tri- and tetra-layers, as well as h-BN few-layers. Our findings offer an exceptional strategy for potential controllable, layer-by-layer and wafer-scale growth of vertically stacked few-layered 2D single crystals.

cond-mat.mtrl-sci↗

arXiv2022

Pristine graphene as a catalyst in reactions with organics containing C=O bonds

Pristine graphene is thought lack of catalytic activity up to date, although using graphene-plus-heteroatom materials as catalysts has become a subject of intensive research because it can be metal saving, eco-friendly and ultimately sustainable. Here we report observations of catalytic reactions of high-quality, clean, pristine graphene when immersed into organics containing C=O bonds, like acetone, acetic acid and acetaldehyde. The C=O bonds were found to break and form polymers including polyethers. The reaction rate is highly temperature dependent. The reaction products mainly physically adsorb on graphene and do not cause increase of defect density in graphene, hence graphene retains its intrinsic properties. This new catalysis shall not only find practical importance but also deepen our understanding on the role of graphene in all graphene based catalysis.

cond-mat.mtrl-sci↗

arXiv2022

Layer-by-Layer Epitaxy of Multilayer MoS2 Wafers

Two-dimensional (2D) semiconductor of MoS2 has great potential for advanced electronics technologies beyond silicon1-9. So far, high-quality monolayer MoS2 wafers10-12 are already available and various demonstrations from individual transistors to integrated circuits have also been shown13-15. In addition to the monolayer, multilayers have narrower band gaps but improved carrier mobilities and current capacities over the monolayer5,16-18. However, achieving high-quality multilayer MoS2 wafers remains a challenge. Here we report the growth of high quality multilayer MoS2 4-inch wafers via the layer-by-layer epitaxy process. The epitaxy leads to well-defined stacking orders between adjacent epitaxial layers and offers a delicate control of layer numbers up to 6. Systematic evaluations on the atomic structures and electronic properties were carried out for achieved wafers with different layer numbers. Significant improvements on device performances were found in thicker-layer field effect transistors (FETs), as expected. For example, the average field-effect mobility (μFE) at room temperature (RT) can increase from ~80 cm2V-1s-1 for monolayer to ~110/145 cm2V-1s-1 for bilayer/trilayer devices. The highest RT μFE=234.7 cm2V-1s-1 and a record-high on-current densities of 1.704 mAμm-1 at Vds=2 V were also achieved in trilayer MoS2 FETs with a high on/off ratio exceeding 107. Our work hence moves a step closer to practical applications of 2D MoS2 in electronics.

physics.app-ph↗