arXiv subjects

Kento Kawaharazuka

Publications and source records attributed to Kento Kawaharazuka.

At least 55 records · Page 3Linked to original sources

arXiv2025

Development of a Five-Fingerd Biomimetic Soft Robotic Hand by 3D Printing the Skin and Skeleton as One Unit

Robot hands that imitate the shape of the human body have been actively studied, and various materials and mechanisms have been proposed to imitate the human body. Although the use of soft materials is advantageous in that it can imitate the characteristics of the human body's epidermis, it increases the number of parts and makes assembly difficult in order to perform complex movements. In this study, we propose a skin-skeleton integrated robot hand that has 15 degrees of freedom and consists of four parts. The developed robotic hand is mostly composed of a single flexible part produced by a 3D printer, and while it can be easily assembled, it can perform adduction, flexion, and opposition of the thumb, as well as flexion of four fingers.

cs.RO↗

arXiv2025

Learning Quiet Walking for a Small Home Robot

As home robotics gains traction, robots are increasingly integrated into households, offering companionship and assistance. Quadruped robots, particularly those resembling dogs, have emerged as popular alternatives for traditional pets. However, user feedback highlights concerns about the noise these robots generate during walking at home, particularly the loud footstep sound. To address this issue, we propose a sim-to-real based reinforcement learning (RL) approach to minimize the foot contact velocity highly related to the footstep sound. Our framework incorporates three key elements: learning varying PD gains to actively dampen and stiffen each joint, utilizing foot contact sensors, and employing curriculum learning to gradually enforce penalties on foot contact velocity. Experiments demonstrate that our learned policy achieves superior quietness compared to a RL baseline and the carefully handcrafted Sony commercial controllers. Furthermore, the trade-off between robustness and quietness is shown. This research contributes to developing quieter and more user-friendly robotic companions in home environments.

cs.RO↗

arXiv2025

Reflex-based Motion Strategy of Musculoskeletal Humanoids under Environmental Contact Using Muscle Relaxation Control

The musculoskeletal humanoid can move well under environmental contact thanks to its body softness. However, there are few studies that actively make use of the environment to rest its flexible musculoskeletal body. Also, its complex musculoskeletal structure is difficult to modelize and high internal muscle tension sometimes occurs. To solve these problems, we develop a muscle relaxation control which can minimize the muscle tension by actively using the environment and inhibit useless internal muscle tension. We apply this control to some basic movements, the motion of resting the arms on the desk, and handle operation, and verify its effectiveness.

cs.RO↗

arXiv2025

Online Learning of Danger Avoidance for Complex Structures of Musculoskeletal Humanoids and Its Applications

The complex structure of musculoskeletal humanoids makes it difficult to model them, and the inter-body interference and high internal muscle force are unavoidable. Although various safety mechanisms have been developed to solve this problem, it is important not only to deal with the dangers when they occur but also to prevent them from happening. In this study, we propose a method to learn a network outputting danger probability corresponding to the muscle length online so that the robot can gradually prevent dangers from occurring. Applications of this network for control are also described. The method is applied to the musculoskeletal humanoid, Musashi, and its effectiveness is verified.

cs.RO↗

arXiv2025

Stability Recognition with Active Vibration for Bracing Behaviors and Motion Extensions Using Environment in Musculoskeletal Humanoids

Although robots with flexible bodies are superior in terms of the contact and adaptability, it is difficult to control them precisely. On the other hand, human beings make use of the surrounding environments to stabilize their bodies and control their movements. In this study, we propose a method for the bracing motion and extension of the range of motion using the environment for the musculoskeletal humanoid. Here, it is necessary to recognize the stability of the body when contacting the environment, and we develop a method to measure it by using the change in sensor values of the body when actively vibrating a part of the body. Experiments are conducted using the musculoskeletal humanoid Musashi, and the effectiveness of this method is confirmed.

cs.RO↗

arXiv2025

Applications of Stretch Reflex for the Upper Limb of Musculoskeletal Humanoids: Protective Behavior, Postural Stability, and Active Induction

The musculoskeletal humanoid has various biomimetic benefits, and it is important that we can embed and evaluate human reflexes in the actual robot. Although stretch reflex has been implemented in lower limbs of musculoskeletal humanoids, we apply it to the upper limb to discover its useful applications. We consider the implementation of stretch reflex in the actual robot, its active/passive applications, and the change in behavior according to the difference of parameters.

cs.RO↗

arXiv2025

Exceeding the Maximum Speed Limit of the Joint Angle for the Redundant Tendon-driven Structures of Musculoskeletal Humanoids

The musculoskeletal humanoid has various biomimetic benefits, and the redundant muscle arrangement is one of its most important characteristics. This redundancy can achieve fail-safe redundant actuation and variable stiffness control. However, there is a problem that the maximum joint angle velocity is limited by the slowest muscle among the redundant muscles. In this study, we propose two methods that can exceed the limited maximum joint angle velocity, and verify the effectiveness with actual robot experiments.

cs.RO↗

arXiv2025

Design Optimization of Musculoskeletal Humanoids with Maximization of Redundancy to Compensate for Muscle Rupture

Musculoskeletal humanoids have various biomimetic advantages, and the redundant muscle arrangement allowing for variable stiffness control is one of the most important. In this study, we focus on one feature of the redundancy, which enables the humanoid to keep moving even if one of its muscles breaks, an advantage that has not been dealt with in many studies. In order to make the most of this advantage, the design of muscle arrangement is optimized by considering the maximization of minimum available torque that can be exerted when one muscle breaks. This method is applied to the elbow of a musculoskeletal humanoid Musashi with simulations, the design policy is extracted from the optimization results, and its effectiveness is confirmed with the actual robot.

cs.RO↗

arXiv2025

Front Hair Styling Robot System Using Path Planning for Root-Centric Strand Adjustment

Hair styling is a crucial aspect of personal grooming, significantly influenced by the appearance of front hair. While brushing is commonly used both to detangle hair and for styling purposes, existing research primarily focuses on robotic systems for detangling hair, with limited exploration into robotic hair styling. This research presents a novel robotic system designed to automatically adjust front hairstyles, with an emphasis on path planning for root-centric strand adjustment. The system utilizes images to compare the current hair state with the desired target state through an orientation map of hair strands. By concentrating on the differences in hair orientation and specifically targeting adjustments at the root of each strand, the system performs detailed styling tasks. The path planning approach ensures effective alignment of the hairstyle with the target, and a closed-loop mechanism refines these adjustments to accurately evolve the hairstyle towards the desired outcome. Experimental results demonstrate that the proposed system achieves a high degree of similarity and consistency in front hair styling, showing promising results for automated, precise hairstyle adjustments.

cs.RO↗

arXiv2024

Behavioral Learning of Dish Rinsing and Scrubbing based on Interruptive Direct Teaching Considering Assistance Rate

Robots are expected to manipulate objects in a safe and dexterous way. For example, washing dishes is a dexterous operation that involves scrubbing the dishes with a sponge and rinsing them with water. It is necessary to learn it safely without splashing water and without dropping the dishes. In this study, we propose a safe and dexterous manipulation system. The robot learns a dynamics model of the object by estimating the state of the object and the robot itself, the control input, and the amount of human assistance required (assistance rate) after the human corrects the initial trajectory of the robot's hands by interruptive direct teaching. By backpropagating the error between the estimated and the reference value using the acquired dynamics model, the robot can generate a control input that approaches the reference value, for example, so that human assistance is not required and the dish does not move excessively. This allows for adaptive rinsing and scrubbing of dishes with unknown shapes and properties. As a result, it is possible to generate safe actions that require less human assistance.

cs.RO↗

arXiv2024

Task-specific Self-body Controller Acquisition by Musculoskeletal Humanoids: Application to Pedal Control in Autonomous Driving

The musculoskeletal humanoid has many benefits that human beings have, but the modeling of its complex flexible body is difficult. Although we have developed an online acquisition method of the nonlinear relationship between joints and muscles, we could not completely match the actual robot and its self-body image. When realizing a certain task, the direct relationship between the control input and task state needs to be learned. So, we construct a neural network representing the time-series relationship between the control input and task state, and realize the intended task state by applying the network to a real-time control. In this research, we conduct accelerator pedal control experiments as one application, and verify the effectiveness of this study.

cs.RO↗

arXiv2024

Environmentally Adaptive Control Including Variance Minimization Using Stochastic Predictive Network with Parametric Bias: Application to Mobile Robots

In this study, we propose a predictive model composed of a recurrent neural network including parametric bias and stochastic elements, and an environmentally adaptive robot control method including variance minimization using the model. Robots which have flexible bodies or whose states can only be partially observed are difficult to modelize, and their predictive models often have stochastic behaviors. In addition, the physical state of the robot and the surrounding environment change sequentially, and so the predictive model can change online. Therefore, in this study, we construct a learning-based stochastic predictive model implemented in a neural network embedded with such information from the experience of the robot, and develop a control method for the robot to avoid unstable motion with large variance while adapting to the current environment. This method is verified through a mobile robot in simulation and to the actual robot Fetch.

cs.RO↗

arXiv2024

Modification of muscle antagonistic relations and hand trajectory on the dynamic motion of Musculoskeletal Humanoid

In recent years, some research on musculoskeletal humanoids is in progress. However, there are some challenges such as unmeasurable transformation of body structure and muscle path, and difficulty in measuring own motion because of lack of joint angle sensor. In this study, we suggest two motion acquisition methods. One is a method to acquire antagonistic relations of muscles by tension sensing, and the other is a method to acquire correct hand trajectory by vision sensing. Finally, we realize badminton shuttlecock-hitting motion of Kengoro with these two acquisition methods.

cs.RO↗

arXiv2024

Design of a Five-Fingered Hand with Full-Fingered Tactile Sensors Using Conductive Filaments and Its Application to Bending after Insertion Motion

The purpose of this study is to construct a contact point estimation system for the both side of a finger, and to realize a motion of bending the finger after inserting the finger into a tool (hereinafter referred to as the bending after insertion motion). In order to know the contact points of the full finger including the joints, we propose to fabricate a nerve inclusion flexible epidermis by combining a flexible epidermis and a nerve line made of conductive filaments, and estimate the contact position from the change of resistance of the nerve line. A nerve inclusion flexible epidermis attached to a thin fingered robotic hand was combined with a twin-armed robot and tool use experiments were conducted. The contact information can be used for tool use, confirming the effectiveness of the proposed method.

cs.RO↗

arXiv2024

Remote Life Support Robot Interface System for Global Task Planning and Local Action Expansion Using Foundation Models

Robot systems capable of executing tasks based on language instructions have been actively researched. It is challenging to convey uncertain information that can only be determined on-site with a single language instruction to the robot. In this study, we propose a system that includes ambiguous parts as template variables in language instructions to communicate the information to be collected and the options to be presented to the robot for predictable uncertain events. This study implements prompt generation for each robot action function based on template variables to collect information, and a feedback system for presenting and selecting options based on template variables for user-to-robot communication. The effectiveness of the proposed system was demonstrated through its application to real-life support tasks performed by the robot.

cs.RO↗

arXiv2024

Vlimb: A Wire-Driven Wearable Robot for Bodily Extension, Balancing Powerfulness and Reachability

Numerous wearable robots have been developed to meet the demands of physical assistance and entertainment. These wearable robots range from body-enhancing types that assist human arms and legs to body-extending types that have extra arms. This study focuses specifically on wearable robots of the latter category, aimed at bodily extension. However, they have not yet achieved the level of powerfulness and reachability equivalent to that of human limbs, limiting their application to entertainment and manipulation tasks involving lightweight objects. Therefore, in this study, we develop an body-extending wearable robot, Vlimb, which has enough powerfulness to lift a human and can perform manipulation. Leveraging the advantages of tendon-driven mechanisms, Vlimb incorporates a wire routing mechanism capable of accommodating both delicate manipulations and robust lifting tasks. Moreover, by introducing a passive ring structure to overcome the limited reachability inherent in tendon-driven mechanisms, Vlimb achieves both the powerfulness and reachability comparable to that of humans. This paper outlines the design methodology of Vlimb, conducts preliminary manipulation and lifting tasks, and verifies its effectiveness.

cs.RO↗

arXiv2024

Integrative Wrapping System for a Dual-Arm Humanoid Robot

Flexible object manipulation of paper and cloth is a major research challenge in robot manipulation. Although there have been efforts to develop hardware that enables specific actions and to realize a single action of paper folding using sim-to-real and learning, there have been few proposals for humanoid robots and systems that enable continuous, multi-step actions of flexible materials. Wrapping an object with paper and tape is more complex and diverse than traditional manipulation research due to the increased number of objects that need to be handled, as well as the three-dimensionality of the operation. In this research, necessary information is organized and coded based on the characteristics of each object handled in wrapping. We also generalize the hardware configuration, manipulation method, and recognition system that enable humanoid wrapping operations. The system will include manipulation with admittance control focusing on paper tension and state evaluation using point clouds to handle three-dimensional flexible objects. Finally, wrapping objects with different shapes is experimented with to show the generality and effectiveness of the proposed system.

cs.RO↗

arXiv2024

Motion Modification Method of Musculoskeletal Humanoids by Human Teaching Using Muscle-Based Compensation Control

While musculoskeletal humanoids have the advantages of various biomimetic structures, it is difficult to accurately control the body, which is challenging to model. Although various learning-based control methods have been developed so far, they cannot completely absorb model errors, and recognition errors are also bound to occur. In this paper, we describe a method to modify the movement of the musculoskeletal humanoid by applying external force during the movement, taking advantage of its flexible body. Considering the fact that the joint angles cannot be measured, and that the external force greatly affects the nonlinear elastic element and not the actuator, the modified motion is reproduced by the proposed muscle-based compensation control. This method is applied to a musculoskeletal humanoid, Musashi, and its effectiveness is confirmed.

cs.RO↗