arXiv subjects

Lajos Hanzo

Publications and source records attributed to Lajos Hanzo.

At least 253 records · Page 14Linked to original sources

arXiv2021

Joint Training of the Superimposed Direct and Reflected Links in Reconfigurable Intelligent Surface Assisted Multiuser Communications

In Reconfigurable intelligent surface (RIS)-assisted systems the acquisition of CSI and the optimization of the reflecting coefficients constitute a pair of salient design issues. In this paper, a novel channel training protocol is proposed, which is capable of achieving a flexible performance vs. signalling and pilot overhead as well as implementation complexity trade-off. More specifically, first of all, we conceive a holistic channel estimation protocol, which integrates the existing channel estimation techniques and passive beamforming design. Secondly, we propose a new channel training framework. In contrast to the conventional channel estimation arrangements, our new framework divides the training phase into several periods, where the superimposed end-to-end channel is estimated instead of separately estimating the direct BS-user channel and cascaded reflected BS-RIS-user channels. As a result, the reflecting coefficients of the RIS are optimized by comparing the objective function values over multiple training periods. Moreover, the theoretical performance of our channel training protocol is analyzed and compared to that under the optimal reflecting coefficients. In addition, the potential benefits of our channel training protocol in reducing the complexity, pilot overhead as well as signalling overhead are also detailed. Thirdly, we derive the theoretical performance of channel estimation protocols and our channel training protocol in the presence of noise for a SISO scenario, which provides useful insights into the impact of the noise on the overall RIS performance. Finally, our numerical simulations characterize the performance of the proposed protocols and verify our theoretical analysis. In particular, the simulation results demonstrate that our channel training protocol is more competitive than the channel estimation protocol at low signal-to-noise ratios.

cs.IT↗

arXiv2021

Reconfigurable Intelligent Surfaces for 6G Systems: Principles, Applications, and Research Directions

Reconfigurable intelligent surfaces (RISs) or intelligent reflecting surfaces (IRSs), are regarded as one of the most promising and revolutionizing techniques for enhancing the spectrum and/or energy efficiency of wireless systems. These devices are capable of reconfiguring the wireless propagation environment by carefully tuning the phase shifts of a large number of low-cost passive reflecting elements. In this article, we aim for answering four fundmental questions: 1) Why do we need RISs? 2) What is an RIS? 3) What are RIS's applications? 4) What are the relevant challenges and future research directions? In response, eight promising research directions are pointed out.

eess.SP↗

arXiv2021

AI-Assisted MAC for Reconfigurable Intelligent Surface-Aided Wireless Networks: Challenges and Opportunities

Recently, significant research attention has been devoted to the study of reconfigurable intelligent surfaces (RISs), which are capable of reconfiguring the wireless propagation environment by exploiting the unique properties of metamaterials-based integrated large arrays of inexpensive antennas. Existing research demonstrates that RISs significantly improve the physical layer performance, including the wireless coverage, achievable data rate and energy efficiency. However, the medium access control (MAC) of multiple users accessing an RIS-enabled channel is still in its infancy, while many open issues remain to be addressed. In this article, we present four typical RIS-aided multi-user scenarios with special emphasis on the MAC schemes. We then propose and elaborate upon centralized, distributed and hybrid artificial-intelligence (AI)-assisted MAC architectures in RIS-aided multi-user communications systems. Finally, we discuss some challenges, perspectives and potential applications of RISs as they are related to MAC design.

cs.NI↗

arXiv2021

NOMA for Next-generation Massive IoT: Performance Potential and Technology Directions

Broader applications of the Internet of Things (IoT) are expected in the forthcoming 6G system, although massive IoT is already a key scenario in 5G, predominantly relying on physical layer solutions inherited from 4G LTE and primarily using orthogonal multiple access (OMA). In 6G IoT, supporting a massive number of connections will be required for diverse services of the vertical sectors, prompting fundamental studies on how to improve the spectral efficiency of the system. One of the key enabling technologies is non-orthogonal multiple access (NOMA). This paper consists of two parts. In the first part, finite block length theory and the diversity order of multi-user systems will be used to show the significant potential of NOMA compared to traditional OMA. The supremacy of NOMA over OMA is particularly pronounced for asynchronous contention-based systems relying on imperfect link adaptation, which are commonly assumed for massive IoT systems. To approach these performance bounds, in the second part of the paper, several promising technology directions are proposed for 6G massive IoT, including linear spreading, joint spreading & modulation, multi-user channel coding in the context of various techniques for practical uncoordinated transmissions, cell-free operations, etc., from the perspective of NOMA.

cs.IT↗

arXiv2021

STAR: Simultaneous Transmission And Reflection for 360° Coverage by Intelligent Surfaces

A novel simultaneously transmitting and reflecting (STAR) system design relying on reconfigurable intelligent surfaces (RISs) is conceived. First, an existing prototype is reviewed and the potential benefits of STAR-RISs are discussed. Then, the key differences between conventional reflecting-only RISs and STAR-RISs are identified from the perspectives of hardware design, physics principles, and communication system design. Furthermore, the basic signal model of STAR-RISs is introduced, and three practical protocols are proposed for their operation, namely energy splitting, mode switching, and time switching. Based on the proposed protocols, a range of promising application scenarios are put forward for integrating STAR-RISs into next-generation wireless networks. By considering the downlink of a typical RIS-aided multiple-input single-output (MISO) system, numerical case studies are provided for revealing the superiority of STAR-RISs over other baselines, when employing the proposed protocols. Finally, several open research problems are discussed.

cs.IT↗

arXiv2021

MIMO Assisted Networks Relying on Intelligent Reflective Surfaces

Intelligent reflective surfaces (IRSs) are invoked for improving both spectral efficiency (SE) and energy efficiency (EE). Specifically, an IRS-aided multiple-input multiple-output network is considered, where the performance of randomly roaming users is analyzed by utilizing stochastic geometry tools. As such, to distinguish the superposed signals at each user, the passive beamforming weight at the IRSs and detection weight vectors at the users are jointly designed. As a benefit, by adopting a zero-forcing-based design, the intra-cell interference imposed by the IRS can be suppressed. In order to evaluate the performance of the proposed network, we first derive the approximated channel statistics in the high signal-to-noise-ratio (SNR) regime. Then, we derive the closed-form expressions both for the outage probability and for the ergodic rate of users. Both the high-SNR slopes of ergodic rate and the diversity orders of outage probability are derived for gleaning further insights. The network's SE and EE are also derived. Our numerical results are provided to confirm that: i) the high-SNR slope of the proposed network is one; ii) the SE and EE can be significantly enhanced by increasing the number of IRS elements.

cs.IT↗

arXiv2021

Orthogonal Time-Frequency Space Modulation: A Promising Next-Generation Waveform

The sixth-generation (6G) wireless networks are envisioned to provide a global coverage for the intelligent digital society of the near future, ranging from traditional terrestrial to non-terrestrial networks, where reliable communications in high-mobility scenarios at high carrier frequencies would play a vital role. In such scenarios, the conventional orthogonal frequency division multiplexing (OFDM) modulation, that has been widely used in both the fourth-generation (4G) and the emerging fifth-generation (5G) cellular systems as well as in WiFi networks, is vulnerable to severe Doppler spread. In this context, this article aims to introduce a recently proposed two-dimensional modulation scheme referred to as orthogonal time-frequency space (OTFS) modulation, which conveniently accommodates the channel dynamics via modulating information in the delay-Doppler domain. This article provides an easy-reading overview of OTFS, highlighting its underlying motivation and specific features. The critical challenges of OTFS and our preliminary results are presented. We also discuss a range of promising research opportunities and potential applications of OTFS in 6G wireless networks.

cs.IT↗

arXiv2021

Internet of Underwater Things and Big Marine Data Analytics -- A Comprehensive Survey

The Internet of Underwater Things (IoUT) is an emerging communication ecosystem developed for connecting underwater objects in maritime and underwater environments. The IoUT technology is intricately linked with intelligent boats and ships, smart shores and oceans, automatic marine transportations, positioning and navigation, underwater exploration, disaster prediction and prevention, as well as with intelligent monitoring and security. The IoUT has an influence at various scales ranging from a small scientific observatory, to a midsized harbor, and to covering global oceanic trade. The network architecture of IoUT is intrinsically heterogeneous and should be sufficiently resilient to operate in harsh environments. This creates major challenges in terms of underwater communications, whilst relying on limited energy resources. Additionally, the volume, velocity, and variety of data produced by sensors, hydrophones, and cameras in IoUT is enormous, giving rise to the concept of Big Marine Data (BMD), which has its own processing challenges. Hence, conventional data processing techniques will falter, and bespoke Machine Learning (ML) solutions have to be employed for automatically learning the specific BMD behavior and features facilitating knowledge extraction and decision support. The motivation of this paper is to comprehensively survey the IoUT, BMD, and their synthesis. It also aims for exploring the nexus of BMD with ML. We set out from underwater data collection and then discuss the family of IoUT data communication techniques with an emphasis on the state-of-the-art research challenges. We then review the suite of ML solutions suitable for BMD handling and analytics. We treat the subject deductively from an educational perspective, critically appraising the material surveyed.

cs.NI↗

arXiv2021

Is NOMA Efficient in Multi-Antenna Networks? A Critical Look at Next Generation Multiple Access Techniques

In this paper, we take a critical and fresh look at the downlink multi-antenna NOMA literature. Instead of contrasting NOMA with OMA, we contrast NOMA with two other baselines. The first is conventional Multi-User Linear Precoding (MULP). The second is Rate-Splitting Multiple Access (RSMA) based on multi-antenna Rate-Splitting (RS) and SIC. We show that there is some confusion about the benefits of NOMA, and we dispel the associated misconceptions. First, we highlight why NOMA is inefficient in multi-antenna settings based on basic multiplexing gain analysis. We stress that the issue lies in how the NOMA literature has been hastily applied to multi-antenna setups, resulting in a misuse of spatial dimensions and therefore loss in multiplexing gains and rate. Second, we show that NOMA incurs a severe multiplexing gain loss despite an increased receiver complexity due to an inefficient use of SIC receivers. Third, we emphasize that much of the merits of NOMA are due to the constant comparison to OMA instead of comparing it to MULP and RS baselines. We then expose the pivotal design constraint that multi-antenna NOMA requires one user to fully decode the messages of the other users. This design constraint is responsible for the multiplexing gain erosion, rate loss, and inefficient use of SIC receivers in multi-antenna settings. Our results confirm that NOMA should not be applied blindly to multi-antenna settings, highlight the scenarios where MULP outperforms NOMA and vice versa, and demonstrate the inefficiency, performance loss and complexity disadvantages of NOMA compared to RS. The first takeaway message is that, while NOMA is not beneficial in most multi-antenna deployments. The second takeaway message is that other non-orthogonal transmission frameworks, such as RS, exist which fully exploit the multiplexing gain and the benefits of SIC to boost the rate in multi-antenna settings.

cs.IT↗

arXiv2020

Sampling Overhead Analysis of Quantum Error Mitigation: Uncoded vs. Coded Systems

Quantum error mitigation (QEM) is a promising technique of protecting hybrid quantum-classical computation from decoherence, but it suffers from sampling overhead which erodes the computational speed. In this treatise, we provide a comprehensive analysis of the sampling overhead imposed by QEM. In particular, we show that Pauli errors incur the lowest sampling overhead among a large class of realistic quantum channels having the same average fidelity. Furthermore, we show that depolarizing errors incur the lowest sampling overhead among all kinds of Pauli errors. Additionally, we conceive a scheme amalgamating QEM with quantum channel coding, and analyse its sampling overhead reduction compared to pure QEM. Especially, we observe that there exist a critical number of gates contained in quantum circuits, beyond which their amalgamation is preferable to pure QEM.

quant-ph↗

arXiv2020

Dynamic Hybrid Precoding Relying on Twin-Resolution Phase Shifters in Millimeter-Wave Communication Systems

Hybrid analog/digital precoding in millimeter-wave (mmWave) multi-input multi-ouput (MIMO) systems is capable of achieving the near-optimal full-digital performance at reduced hardware cost and power consumption compared to its full-RF digital counterpart. However, having numerous phase shifters is still costly, especially when the phase shifters are of high resolution. In this paper, we propose a novel twin-resolution phase-shifter network for mmWave MIMO systems, which reduces the power consumption of an entirely high-resolution network, whilst mitigating the severe array gain reduction of an entirely low-resolution network. The connections between the twin phase shifters having different resolutions and the antennas are either fixed or dynamically configured. In the latter, we jointly design the phase-shifter network and the hybrid precoding matrix, where the phase of each entry in the analog precoding matrix can be dynamically designed according to the required resolution. This method is slightly modified for the fixed network's hybrid precoding matrix. Furthermore, we extend the proposed method to multi-user MIMO systems and provide its performance analysis. Our simulation results show that the proposed dynamic hybrid precoding method strikes an attractive performance vs. power consumption trade-off.

cs.IT↗

arXiv2020

Stochastic Hybrid Combining Design for Quantized Massive MIMO Systems

Both the power-dissipation and cost of massive multiple-input multiple-output (mMIMO) systems may be substantially reduced by using low-resolution analog-to-digital converters (LADCs) at the receivers. However, both the coarse quantization of LADCs and the inaccurate instantaneous channel state information (ICSI) degrade the performance of quantized mMIMO systems. To overcome these challenges, we propose a novel stochastic hybrid analog-digital combiner (SHC) scheme for adapting the hybrid combiner to the long-term statistics of the channel state information (SCSI). We seek to minimize the transmit power by jointly optimizing the SHC subject to average rate constraints. For the sake of solving the resultant nonconvex stochastic optimization problem, we develop a relaxed stochastic successive convex approximation (RSSCA) algorithm. Simulations are carried out to confirm the benefits of our proposed scheme over the benchmarkers.

eess.SP↗

arXiv2020

Physical Layer Security of Intelligent Reflective Surface Aided NOMA Networks

Intelligent reflective surface (IRS) technology is emerging as a promising performance enhancement technique for next-generation wireless networks. Hence, we investigate the physical layer security of the downlink in IRS-aided non-orthogonal multiple access networks in the presence of an eavesdropper, where an IRS is deployed for enhancing the quality by assisting the cell-edge user to communicate with the base station. To characterize the network's performance, the expected value of the new channel statistics is derived for the reflected links in the case of Nakagami-m fading. Furthermore, the performance of the proposed network is evaluated both in terms of the secrecy outage probability (SOP) and the average secrecy capacity (ASC). The closed-form expressions of the SOP and the ASC are derived. We also study the impact of various network parameters on the overall performance of the network considered. To obtain further insights, the secrecy diversity orders and the high signal-to-noise ratio slopes are obtained. We finally show that: 1) the expectation of the channel gain in the reflected links is determined both by the number of IRSs and by the Nakagami-m fading parameters; 2) The SOP of both receiver 1 and receiver 2 becomes unity, when the number of IRSs is sufficiently high; 3) The secrecy diversity orders are affected both by the number of IRSs and by the Nakagami-m fading parameters, whereas the high-SNR slopes are not affected by these parameters. Our Monte-Carlo simulations perfectly demonstrate the analytical results.

eess.SP↗

arXiv2020

Accelerating Deep Reinforcement Learning With the Aid of Partial Model: Energy-Efficient Predictive Video Streaming

Predictive power allocation is conceived for energy-efficient video streaming over mobile networks using deep reinforcement learning. The goal is to minimize the accumulated energy consumption of each base station over a complete video streaming session under the constraint that avoids video playback interruptions. To handle the continuous state and action spaces, we resort to deep deterministic policy gradient (DDPG) algorithm for solving the formulated problem. In contrast to previous predictive power allocation policies that first predict future information with historical data and then optimize the power allocation based on the predicted information, the proposed policy operates in an on-line and end-to-end manner. By judiciously designing the action and state that only depend on slowly-varying average channel gains, we reduce the signaling overhead between the edge server and the base stations, and make it easier to learn a good policy. To further avoid playback interruption throughout the learning process and improve the convergence speed, we exploit the partially known model of the system dynamics by integrating the concepts of safety layer, post-decision state, and virtual experiences into the basic DDPG algorithm. Our simulation results show that the proposed policies converge to the optimal policy that is derived based on perfect large-scale channel prediction and outperform the first-predict-then-optimize policy in the presence of prediction errors. By harnessing the partially known model, the convergence speed can be dramatically improved.

cs.LG↗

arXiv2020

Intelligent Reflecting Surface Assisted Beam Index-Modulation for Millimeter Wave Communication

Millimeter wave communication is eminently suitable for high-rate wireless systems, which may be beneficially amalgamated with intelligent reflecting surfaces (IRS), relying on beam-index modulation. Explicitly, we propose three different architectures based on IRSs for beam-index modulation in millimeter wave communication, which circumvent the line-of-sight blockage of millimeter wave frequencies. We conceive both the optimal maximum likelihood detector and a low-complexity compressed sensing detector for the proposed schemes. Finally, the schemes conceived are evaluated through extensive simulations, which are compared to our analytically obtained bounds.

eess.SP↗

arXiv2020

Minimum-Delay Routing for Integrated Aeronautical Ad Hoc Networks Relying on Passenger-Planes in the North-Atlantic Region

Relying on multi-hop communication techniques, aeronautical ad hoc networks (AANETs) seamlessly integrate ground base stations (BSs) and satellites into aircraft communications for enhancing the on-demand connectivity of planes in the air. In this integrated AANET context we investigate the shortest-path routing problem with the objective of minimizing the total delay of the in-flight connection from the ground BS subject to certain minimum-rate constraints for all selected links in support of low-latency and high-speed services. Inspired by the best-first search and priority queue concepts, we model the problem formulated by a weighted digraph and find the optimal route based on the shortest-path algorithm. Our simulation results demonstrate that aircraft-aided multi-hop communications are capable of reducing the total delay of satellite communications, when relying on real historical flight data.

cs.IT↗

arXiv2020

Joint User Scheduling and Resource Allocation for Millimeter Wave Systems Relying on Adaptive-Resolution ADCs

Millimeter wave (mmWave) communication systems using adaptive-resolution analog-to-digital converters (RADCs) have recently drawn considerable interests from the research community as benefit of their high energy efficiency and low implementation cost. In this paper, we focus on the mmWave uplink using RADCs and investigate the joint user scheduling and resource allocation problem. Specifically, we seek to maximize the system throughput of the scheduled users by jointly optimizing their transmit power level and hybrid combiners as well as the number of quantization bits, subject to practical constraints. By relying on fractional programming (FP) techniques, we first covert this problem into a form amenable to optimization and exploit the specific structures in its solutions with the aid of the so-called Ky Fan n-norm. Then, the resultant optimization problem is solved using a penalty block successive concave approximation (P-BSCA) algorithm. Our numerical results reveal that the proposed algorithm substantially enhances the throughput of the scheduled users compared to the state-of-theart benchmark schemes and provides more flexible and efficient resource allocation control.

cs.IT↗

arXiv2020

Matrix-Monotonic Optimization Part I: Single-Variable Optimization

Matrix-monotonic optimization exploits the monotonic nature of positive semi-definite matrices to derive optimal diagonalizable structures for the matrix variables of matrix-variable optimization problems. Based on the optimal structures derived, the associated optimization problems can be substantially simplified and underlying physical insights can also be revealed. In our work, a comprehensive framework of the applications of matrix-monotonic optimization to multiple-input multiple-output (MIMO) transceiver design is provided for a series of specific performance metrics under various linear constraints. This framework consists of two parts, i.e., Part-I for single-variable optimization and Part-II for multi-variable optimization. In this paper, single-variable matrix-monotonic optimization is investigated under various power constraints and various types of channel state information (CSI) condition. Specifically, three cases are investigated: 1) both the transmitter and receiver have imperfect CSI; 2) perfect CSI is available at the receiver but the transmitter has no CSI; 3) perfect CSI is available at the receiver but the channel estimation error at the transmitter is norm-bounded. In all three cases, the matrix-monotonic optimization framework can be used for deriving the optimal structures of the optimal matrix variables.

cs.IT↗