arXiv subjects

Lajos Hanzo

Publications and source records attributed to Lajos Hanzo.

At least 271 records · Page 15Linked to original sources

arXiv2020

Matrix-Monotonic Optimization Part II: Multi-Variable Optimization

In contrast to Part I of this treatise [1] that focuses on the optimization problems associated with single matrix variables, in this paper, we investigate the application of the matrix-monotonic optimization framework in the optimization problems associated with multiple matrix variables. It is revealed that matrix-monotonic optimization still works even for multiple matrix-variate based optimization problems, provided that certain conditions are satisfied. Using this framework, the optimal structures of the matrix variables can be derived and the associated multiple matrix-variate optimization problems can be substantially simplified. In this paper, several specific examples are given, which are essentially open problems. Firstly, we investigate multi-user multiple-input multiple-output (MU- MIMO) uplink communications under various power constraints. Using the proposed framework, the optimal structures of the precoding matrices at each user under various power constraints can be derived. Secondly, we considered the optimization of the signal compression matrices at each sensor under various power constraints in distributed sensor networks. Finally, we investigate the transceiver optimization for multi-hop amplify-and-forward (AF) MIMO relaying networks with imperfect channel state information (CSI) under various power constraints. At the end of this paper, several simulation results are given to demonstrate the accuracy of the proposed theoretical results.

cs.IT↗

arXiv2020

Multi-Agent Deep Reinforcement Learning Based Trajectory Planning for Multi-UAV Assisted Mobile Edge Computing

An unmanned aerial vehicle (UAV)-aided mobile edge computing (MEC) framework is proposed, where several UAVs having different trajectories fly over the target area and support the user equipments (UEs) on the ground. We aim to jointly optimize the geographical fairness among all the UEs, the fairness of each UAV' UE-load and the overall energy consumption of UEs. The above optimization problem includes both integer and continues variables and it is challenging to solve. To address the above problem, a multi-agent deep reinforcement learning based trajectory control algorithm is proposed for managing the trajectory of each UAV independently, where the popular Multi-Agent Deep Deterministic Policy Gradient (MADDPG) method is applied. Given the UAVs' trajectories, a low-complexity approach is introduced for optimizing the offloading decisions of UEs. We show that our proposed solution has considerable performance over other traditional algorithms, both in terms of the fairness for serving UEs, fairness of UE-load at each UAV and energy consumption for all the UEs.

eess.SP↗

arXiv2020

Low-Complexity Joint Power Allocation and Trajectory Design for UAV-Enabled Secure Communications with Power Splitting

An unmanned aerial vehicle (UAV)-aided secure communication system is conceived and investigated, where the UAV transmits legitimate information to a ground user in the presence of an eavesdropper (Eve). To guarantee the security, the UAV employs a power splitting approach, where its transmit power can be divided into two parts for transmitting confidential messages and artificial noise (AN), respectively. We aim to maximize the average secrecy rate by jointly optimizing the UAV's trajectory, the transmit power levels and the corresponding power splitting ratios allocated to different time slots during the whole flight time, subject to both the maximum UAV speed constraint, the total mobility energy constraint, the total transmit power constraint, and other related constraints. To efficiently tackle this non-convex optimization problem, we propose an iterative algorithm by blending the benefits of the block coordinate descent (BCD) method, the concave-convex procedure (CCCP) and the alternating direction method of multipliers (ADMM). Specially, we show that the proposed algorithm exhibits very low computational complexity and each of its updating steps can be formulated in a nearly closed form. Our simulation results validate the efficiency of the proposed algorithm.

eess.SP↗

arXiv2020

MIMO-Aided Nonlinear Hybrid Transceiver Design for Multiuser mmWave Systems Relying on Tomlinson-Harashima Precoding

Hybrid analog-digital (A/D) transceivers designed for millimeter wave (mmWave) systems have received substantial research attention, as a benefit of their lower cost and modest energy consumption compared to their fully-digital counterparts. We further improve their performance by conceiving a Tomlinson-Harashima precoding (THP) based nonlinear joint design for the downlink of multiuser multiple-input multiple-output (MIMO) mmWave systems. Our optimization criterion is that of minimizing the mean square error (MSE) of the system under channel uncertainties subject both to realistic transmit power constraint and to the unit modulus constraint imposed on the elements of the analog beamforming (BF) matrices governing the BF operation in the radio frequency domain. We transform this optimization problem into a more tractable form and develop an efficient block coordinate descent (BCD) based algorithm for solving it. Then, a novel two-timescale nonlinear joint hybrid transceiver design algorithm is developed, which can be viewed as an extension of the BCD-based joint design algorithm for reducing both the channel state information (CSI) signalling overhead and the effects of outdated CSI. Moreover, we determine the near-optimal cancellation order for the THP structure based on the lower bound of the MSE. The proposed algorithms can be guaranteed to converge to a Karush-Kuhn-Tucker (KKT) solution of the original problem. The simulation results demonstrate that our proposed nonlinear joint hybrid transceiver design algorithms significantly outperform the existing linear hybrid transceiver algorithms and approach the performance of the fully-digital transceiver, despite its lower cost and power dissipation.

cs.IT↗

arXiv2020

Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks

Future wireless networks have a substantial potential in terms of supporting a broad range of complex compelling applications both in military and civilian fields, where the users are able to enjoy high-rate, low-latency, low-cost and reliable information services. Achieving this ambitious goal requires new radio techniques for adaptive learning and intelligent decision making because of the complex heterogeneous nature of the network structures and wireless services. Machine learning (ML) algorithms have great success in supporting big data analytics, efficient parameter estimation and interactive decision making. Hence, in this article, we review the thirty-year history of ML by elaborating on supervised learning, unsupervised learning, reinforcement learning and deep learning. Furthermore, we investigate their employment in the compelling applications of wireless networks, including heterogeneous networks (HetNets), cognitive radios (CR), Internet of things (IoT), machine to machine networks (M2M), and so on. This article aims for assisting the readers in clarifying the motivation and methodology of the various ML algorithms, so as to invoke them for hitherto unexplored services as well as scenarios of future wireless networks.

cs.NI↗

arXiv2020

Deep Learning for Wireless Communications: An Emerging Interdisciplinary Paradigm

Wireless communications are envisioned to bring about dramatic changes in the future, with a variety of emerging applications, such as virtual reality (VR), Internet of things (IoT), etc., becoming a reality. However, these compelling applications have imposed many new challenges, including unknown channel models, low-latency requirement in large-scale super-dense networks, etc. The amazing success of deep learning (DL) in various fields, particularly in computer science, has recently stimulated increasing interest in applying it to address those challenges. Hence, in this review, a pair of dominant methodologies of using DL for wireless communications are investigated. The first one is DL-based architecture design, which breaks the classical model-based block design rule of wireless communications in the past decades. The second one is DL-based algorithm design, which will be illustrated by several examples in a series of typical techniques conceived for 5G and beyond. Their principles, key features, and performance gains will be discussed. Furthermore, open problems and future research opportunities will also be pointed out, highlighting the interplay between DL and wireless communications. We expect that this review can stimulate more novel ideas and exciting contributions for intelligent wireless communications.

eess.SP↗

arXiv2020

Latency Minimization for Intelligent Reflecting Surface Aided Mobile Edge Computing

Computation off-loading in mobile edge computing (MEC) systems constitutes an efficient paradigm of supporting resource-intensive applications on mobile devices. However, the benefit of MEC cannot be fully exploited, when the communications link used for off-loading computational tasks is hostile. Fortunately, the propagation-induced impairments may be mitigated by intelligent reflecting surfaces (IRS), which are capable of enhancing both the spectral- and energy-efficiency. Specifically, an IRS comprises an IRS controller and a large number of passive reflecting elements, each of which may impose a phase shift on the incident signal, thus collaboratively improving the propagation environment. In this paper, the beneficial role of IRSs is investigated in MEC systems, where single-antenna devices may opt for off-loading a fraction of their computational tasks to the edge computing node via a multi-antenna access point with the aid of an IRS. Pertinent latency-minimization problems are formulated for both single-device and multi-device scenarios, subject to practical constraints imposed on both the edge computing capability and the IRS phase shift design. To solve this problem, the block coordinate descent (BCD) technique is invoked to decouple the original problem into two subproblems, and then the computing and communications settings are alternatively optimized using low-complexity iterative algorithms. It is demonstrated that our IRS-aided MEC system is capable of significantly outperforming the conventional MEC system operating without IRSs. Quantitatively, about $20~\%$ computational latency reduction is achieved over the conventional MEC system in a single cell of a $300~\rm{m}$ radius and $5$ active devices, relying on a $5$-antenna access point.

eess.SP↗

arXiv2020

Compressive Sensing Based Massive Access for IoT Relying on Media Modulation Aided Machine Type Communications

A fundamental challenge of the large-scale Internet-of-Things lies in how to support massive machine-type communications (mMTC). This letter proposes a media modulation based mMTC solution for increasing the throughput, where a massive multi-input multi-output based base station (BS) is used for enhancing the detection performance. For such a mMTC scenario, the reliable active device detection and data decoding pose a serious challenge. By leveraging the sparsity of the uplink access signals of mMTC received at the BS, a compressive sensing based massive access solution is proposed for tackling this challenge. Specifically, we propose a block sparsity adaptive matching pursuit algorithm for detecting the active devices, whereby the block-sparsity of the uplink access signals exhibited across the successive time slots and the structured sparsity of media modulated symbols are exploited for enhancing the detection performance. Moreover, a successive interference cancellation based structured subspace pursuit algorithm is conceived for data demodulation of the active devices, whereby the structured sparsity of media modulation based symbols found in each time slot is exploited for improving the detection performance. Finally, our simulation results verify the superiority of the proposed scheme over state-of-the-art solutions.

cs.IT↗

arXiv2020

Multicell MIMO Communications Relying on Intelligent Reflecting Surface

Intelligent reflecting surfaces (IRSs) constitute a disruptive wireless communication technique capable of creating a controllable propagation environment. In this paper, we propose to invoke an IRS at the cell boundary of multiple cells to assist the downlink transmission to cell-edge users, whilst mitigating the inter-cell interference, which is a crucial issue in multicell communication systems. We aim for maximizing the weighted sum rate (WSR) of all users through jointly optimizing the active precoding matrices at the base stations (BSs) and the phase shifts at the IRS subject to each BS's power constraint and unit modulus constraint. Both the BSs and the users are equipped with multiple antennas, which enhances the spectral efficiency by exploiting the spatial multiplexing gain. Due to the non-convexity of the problem, we first reformulate it into an equivalent one, which is solved by using the block coordinate descent (BCD) algorithm, where the precoding matrices and phase shifts are alternately optimized. The optimal precoding matrices can be obtained in closed form, when fixing the phase shifts. A pair of efficient algorithms are proposed for solving the phase shift optimization problem, namely the Majorization-Minimization (MM) Algorithm and the Complex Circle Manifold (CCM) Method. Both algorithms are guaranteed to converge to at least locally optimal solutions. We also extend the proposed algorithms to the more general multiple-IRS and network MIMO scenarios. Finally, our simulation results confirm the advantages of introducing IRSs in enhancing the cell-edge user performance.

eess.SP↗

arXiv2020

Beam Selection for Wideband Millimeter Wave MIMO Relying on Lens Antenna Arrays

Beamspace multi-input multi-output (MIMO) relying on lens antenna arrays can significantly reduce the number of radio-frequency chains in millimeter-wave (mmWave) communication systems through beam selection. However, the beamforming gain is actually frequency-dependent in wideband mmWave MIMO systems. This phenomenon is called beam squint, which will deteriorate the system's performance when traditional beam selection methods are used. To solve this problem, we propose a wideband beam selection method for mmWave MIMO systems relying on lens antenna arrays. Firstly, we select one beam with the maximal energy averaged over the whole band for each user and then we sequentially select the beams that contribute the most to the sum-rate. Performance analysis of the proposed wideband beam selection method is also presented. Numerical results show that the proposed method achieves higher sum-rate and energy efficiency compared with its traditional counterparts.

eess.SP↗

arXiv2020

Distributed Caching for Data Dissemination in the Downlink of Heterogeneous Networks

Heterogeneous cellular networks (HCN) with embedded small cells are considered, where multiple mobile users wish to download network content of different popularity. By caching data into the small-cell base stations (SBS), we will design distributed caching optimization algorithms via belief propagation (BP) for minimizing the downloading latency. First, we derive the delay-minimization objective function (OF) and formulate an optimization problem. Then we develop a framework for modeling the underlying HCN topology with the aid of a factor graph. Furthermore, distributed BP algorithm is proposed based on the network's factor graph. Next, we prove that a fixed point of convergence exists for our distributed BP algorithm. In order to reduce the complexity of the BP, we propose a heuristic BP algorithm. Furthermore, we evaluate the average downloading performance of our HCN for different numbers and locations of the base stations (BS) and mobile users (MU), with the aid of stochastic geometry theory. By modeling the nodes distributions using a Poisson point process, we develop the expressions of the average factor graph degree distribution, as well as an upper bound of the outage probability for random caching schemes. We also improve the performance of random caching. Our simulations show that (1) the proposed distributed BP algorithm has a near-optimal delay performance, approaching that of the high-complexity exhaustive search method, (2) the modified BP offers a good delay performance at a low communication complexity, (3) both the average degree distribution and the outage upper bound analysis relying on stochastic geometry match well with our Monte-Carlo simulations, and (4) the optimization based on the upper bound provides both a better outage and a better delay performance than the benchmarks.

eess.SP↗

arXiv2020

Joint Data and Active User Detection for Grant-free FTN-NOMA in Dynamic Networks

Both faster than Nyquist (FTN) signaling and non-orthogonal multiple access (NOMA) are promising next generation wireless communications techniques as a benefit of their capability of improving the system's spectral efficiency. This paper considers an uplink system that combines the advantages of FTN and NOMA. Consequently, an improved spectral efficiency is achieved by deliberately introducing both inter-symbol interference (ISI) and inter-user interference (IUI). More specifically, we propose a grant-free transmission scheme to reduce the signaling overhead and transmission latency of the considered NOMA system. To distinguish the active and inactive users, we develop a novel message passing receiver that jointly estimates the channel state, detects the user activity, and performs decoding. We conclude by quantifying the significant spectral efficiency gain achieved by our amalgamated FTN-NOMA scheme compared to the orthogonal transmission system, which is up to 87.5%.

eess.SP↗

arXiv2020

Twin-Timescale Radio Resource Management for Ultra-Reliable and Low-Latency Vehicular Networks

To efficiently support safety-related vehicular applications, the ultra-reliable and low-latency communication (URLLC) concept has become an indispensable component of vehicular networks (VNETs). Due to the high mobility of VNETs, exchanging near-instantaneous channel state information (CSI) and making reliable resource allocation decisions based on such short-term CSI evaluations are not practical. In this paper, we consider the downlink of a vehicle-to-infrastructure (V2I) system conceived for URLLC based on idealized perfect and realistic imperfect CSI. By exploiting the benefits of the massive MIMO concept, a two-stage radio resource allocation problem is formulated based on a novel twin-timescale perspective for avoiding the frequent exchange of near-instantaneous CSI. Specifically, based on the prevalent road-traffic density, Stage 1 is constructed for minimizing the worst-case transmission latency on a long-term timescale. In Stage 2, the base station allocates the total power at a short-term timescale according to the large-scale fading CSI encountered for minimizing the maximum transmission latency across all vehicular users. Then, a primary algorithm and a secondary algorithm are conceived for our V2I URLLC system to find the optimal solution of the twin-timescale resource allocation problem, with special emphasis on the complexity imposed. Finally, our simulation results show that the proposed resource allocation scheme significantly reduces the maximum transmission latency, and it is not sensitive to the fluctuation of road-traffic density.

cs.IT↗

arXiv2020

Intelligent Reflecting Surface Aided MIMO Broadcasting for Simultaneous Wireless Information and Power Transfer

An intelligent reflecting surface (IRS) is invoked for enhancing the energy harvesting performance of a simultaneous wireless information and power transfer (SWIPT) aided system. Specifically, an IRS-assisted SWIPT system is considered, where a multi-antenna aided base station (BS) communicates with several multi-antenna assisted information receivers (IRs), while guaranteeing the energy harvesting requirement of the energy receivers (ERs). To maximize the weighted sum rate (WSR) of IRs, the transmit precoding (TPC) matrices of the BS and passive phase shift matrix of the IRS should be jointly optimized. To tackle this challenging optimization problem, we first adopt the classic block coordinate descent (BCD) algorithm for decoupling the original optimization problem into several subproblems and alternatively optimize the TPC matrices and the phase shift matrix. For each subproblem, we provide a low-complexity iterative algorithm, which is guaranteed to converge to the Karush-Kuhn-Tucker (KKT) point of each subproblem. The BCD algorithm is rigorously proved to converge to the KKT point of the original problem. We also conceive a feasibility checking method to study its feasibility. Our extensive simulation results confirm that employing IRSs in SWIPT beneficially enhances the system performance and the proposed BCD algorithm converges rapidly, which is appealing for practical applications.

eess.SP↗

arXiv2020

Secure Millimeter Wave Cloud Radio Access Networks Relying on Microwave Multicast Fronthaul

In this paper, we investigate the downlink secure beamforming (BF) design problem of cloud radio access networks (C-RANs) relying on multicast fronthaul, where millimeter-wave and microwave carriers are used for the access links and fronthaul links, respectively. The base stations (BSs) jointly serve users through cooperating hybrid analog/digital BF. We first develop an analog BF for cooperating BSs. On this basis, we formulate a secrecy rate maximization (SRM) problem subject both to a realistic limited fronthaul capacity and to the total BS transmit power constraint. Due to the intractability of the non-convex problem formulated, advanced convex approximated techniques, constrained concave convex procedures and semi-definite programming (SDP) relaxation are applied to transform it into a convex one. Subsequently, an iterative algorithm of jointly optimizing multicast BF, cooperative digital BF and the artificial noise (AN) covariance is proposed. Next, we construct the solution of the original problem by exploiting both the primal and the dual optimal solution of the SDP-relaxed problem. Furthermore, a per-BS transmit power constraint is considered, necessitating the reformulation of the SRM problem, which can be solved by an efficient iterative algorithm. We then eliminate the idealized simplifying assumption of having perfect channel state information (CSI) for the eavesdropper links and invoke realistic imperfect CSI. Furthermore, a worst-case SRM problem is investigated. Finally, by combining the so-called $\mathcal{S}$-Procedure and convex approximated techniques, we design an efficient iterative algorithm to solve it. Simulation results are presented to evaluate the secrecy rate and demonstrate the effectiveness of the proposed algorithms.

cs.IT↗

arXiv2020

Artificial Intelligence Aided Next-Generation Networks Relying on UAVs

Artificial intelligence (AI) assisted unmanned aerial vehicle (UAV) aided next-generation networking is proposed for dynamic environments. In the AI-enabled UAV-aided wireless networks (UAWN), multiple UAVs are employed as aerial base stations, which are capable of rapidly adapting to the dynamic environment by collecting information about the users' position and tele-traffic demands, learning from the environment and acting upon the feedback received from the users. Moreover, AI enables the interaction amongst a swarm of UAVs for cooperative optimization of the system. As a benefit of the AI framework, several challenges of conventional UAWN may be circumvented, leading to enhanced network performance, improved reliability and agile adaptivity. As a further benefit, dynamic trajectory design and resource allocation are demonstrated. Finally, potential research challenges and opportunities are discussed.

eess.SP↗

arXiv2020

Optimizing Wireless Systems Using Unsupervised and Reinforced-Unsupervised Deep Learning

Resource allocation and transceivers in wireless networks are usually designed by solving optimization problems subject to specific constraints, which can be formulated as variable or functional optimization. If the objective and constraint functions of a variable optimization problem can be derived, standard numerical algorithms can be applied for finding the optimal solution, which however incur high computational cost when the dimension of the variable is high. To reduce the on-line computational complexity, learning the optimal solution as a function of the environment's status by deep neural networks (DNNs) is an effective approach. DNNs can be trained under the supervision of optimal solutions, which however, is not applicable to the scenarios without models or for functional optimization where the optimal solutions are hard to obtain. If the objective and constraint functions are unavailable, reinforcement learning can be applied to find the solution of a functional optimization problem, which is however not tailored to optimization problems in wireless networks. In this article, we introduce unsupervised and reinforced-unsupervised learning frameworks for solving both variable and functional optimization problems without the supervision of the optimal solutions. When the mathematical model of the environment is completely known and the distribution of environment's status is known or unknown, we can invoke unsupervised learning algorithm. When the mathematical model of the environment is incomplete, we introduce reinforced-unsupervised learning algorithms that learn the model by interacting with the environment. Our simulation results confirm the applicability of these learning frameworks by taking a user association problem as an example.

cs.LG↗

arXiv2019

Reconfigurable Intelligent Surface-Based Wireless Communication: Antenna Design, Prototyping and Experimental Results

One of the key enablers of future wireless communications is constituted by massive multiple-input multiple-output (MIMO) systems, which can improve the spectral efficiency by orders of magnitude. However, in existing massive MIMO systems, conventional phased arrays are used for beamforming, which result in excessive power consumption and hardware cost. Recently, reconfigurable intelligent surface (RIS) has been considered as one of the revolutionary technologies to enable energy-efficient and smart wireless communications, which is a two-dimensional structure with a large number of passive elements. In this paper, we propose and develop a new type of high-gain yet low-cost RIS having 256 elements. The proposed RIS combines the functions of phase shift and radiation together on an electromagnetic surface, where positive intrinsic-negative (PIN) diodes are used to realize 2-bit phase shifting for beamforming. Based on this radical design, the world's first wireless communication prototype using RIS having 256 2-bit elements is designed and developed. Specifically, the prototype conceived consists of modular hardware and flexible software, including the hosts for parameter setting and data exchange, the universal software radio peripherals (USRPs) for baseband and radio frequency (RF) signal processing, as well as the RIS for signal transmission and reception. Our performance evaluation confirms the feasibility and efficiency of RISs in future wireless communications. More particularly, it is shown that a 21.7 dBi antenna gain can be obtained by the proposed RIS at 2.3 GHz, while at the millimeter wave (mmWave) frequency, i.e., 28.5 GHz, a 19.1 dBi antenna gain can be achieved. Furthermore, the over-the-air (OTA) test results show that the RIS-based wireless communication prototype developed is capable of significantly reducing the power consumption.

cs.IT↗