arXiv subjects

Lucas Heublein

Publications and source records attributed to Lucas Heublein.

At least 19 recordsLinked to original sources

arXiv2026

ZK-Trace: Certified Collusion Tracing with Zero-Knowledge Credentials for Federated GNSS Interference Monitoring

Federated global navigation satellite system (GNSS) monitoring distributes a proprietary classifier to partly trusted stations, any of which may leak its copy. ZK-Trace combines public identity marks, recipient-specific Tardos fingerprints, and zero-knowledge credential verification. The registry supports offline tracing without the leaker's cooperation. We establish conditional false-accusation bounds for arbitrary recovered bit patterns, a finite completeness bound under a hidden-bias residual channel, and a deterministic tracing-score bound for correlated feature-distillation errors. An interval-arithmetic checker makes the conditional bound executable and allocates a common budget across accusation and tamper decisions. Under innocent-row independence, the certificate-based evaluation uses a false-naming budget of 0.001 per investigation. It isolates all 160 single-owner copies and traces 712 of 720 two-owner mixtures without naming an innocent. Experiments use a simulated GNSS federation and CIFAR-10. Feature matching preserves the feature mark in 20/20 runs and cross-architecture transfer in 19/20, at copy-accuracy costs of 4.8 and 6.1 percentage points on GNSS and CIFAR-10. Function-only distillation erases the feature mark, and distillation also removes weight-space marks. These results support verifiable tracing under explicit statistical and cryptographic assumptions. Credential knowledge and recipient evidence serve distinct roles.

cs.CR↗

arXiv2026

Analyzing and Characterizing Multi-Source Interference Effects at Jammertest Norway 2025

Intentional radio-frequency interference from low-cost GNSS jammers increasingly threatens the accuracy and reliability of satellite-based positioning. Mitigating this threat requires not only detection but also robust waveform classification and characterization, direction-of-arrival inference for localization, and impact estimation on receiver performance under realistic operating conditions; all of which are challenged by strong distribution shifts across devices, sensors, environments, and satellite geometries. We address these challenges by compiling a dedicated real-world dataset recorded during Jammertest 2025 (Andoya, Norway), covering two outdoor test areas with parallel measurements from a single-antenna E1/E5 receiver module and a 2x2 CRPA-array. The dataset spans diverse jamming, spoofing, and meaconing scenarios, including CW, PRN, sweep/chirp, and multi-emitter configurations, and is complemented by per-recording metadata enabling time-aligned ground truth. Methodologically, we benchmark 17 machine learning (ML) architectures for interference-modulation recognition and multi-task characterization (type, occupied bandwidth, and signal strength), and we quantify navigation-relevant degradation via a receiver-aware spectral separation coefficient (SSC) that maps measured spectra to effective (C_s/N_0)_{eff} loss. To enable multi-source analysis, we transfer a YOLOv8s and RF-DETR detector pretrained on a labeled spectrogram dataset to localize multiple simultaneous interferers in GNSS spectrograms and subsequently characterize each detected component. Results show near-99% within-area classification accuracy but substantial cross-area performance drops, highlighting the need for robustness to real-world domain shifts.

eess.SP↗

arXiv2026

The S-ICDF Dataset: Sionna-Simulated Dynamic Interference Characterization and Direction Finding

Jamming and spoofing threaten wireless and satellite navigation by disrupting or manipulating radio frequency (RF) signals, undermining availability, integrity, and trust. Robust interference monitoring (i.e., detection, classification, characterization, and direction finding) is therefore essential to identify and localize anomalous signals. While machine learning (ML) promises improved performance in complex environments, its development and validation depend on large-scale datasets that capture realistic signal and channel variability. Collecting such data in the real world is difficult because intentional jamming is illegal and ground-truth attribution is confounded by propagation, hardware, and environmental effects. To address this gap, we create and publish S-ICDF, a large-scale indoor interference dataset generated with Sionna, a GPU-accelerated simulation library for physical-layer wireless communications. S-ICDF covers 102 interference configurations, including diverse antenna array patterns, bandwidths, and simulation settings such as noise level and reflection depth. We further provide baseline results by benchmarking S-ICDF with classical estimation and direction finding (DF) methods (MUSIC, ESPRIT, and CAPON) and with modern ML approaches. The dataset is publicly available at: https://gitlab.cc-asp.fraunhofer.de/darcy_gnss/sicdf_dataset

eess.SP↗

arXiv2026

Efficient Network Inference via Hardware-Aware Architecture Search, Model Pruning & Quantization

Embedded global navigation satellite system (GNSS) interference monitoring requires fast and memory-efficient inference to process large volumes of raw in-phase and quadrature (IQ) samples in real time. At the same time, increasingly expressive deep neural networks (DNNs) are needed for robust interference classification and characterization across diverse signal conditions. This creates a fundamental tension between predictive performance and deployability on resource-constrained hardware. In this paper, we investigate efficient network inference for GNSS interference characterization using iterative structured pruning, post-training static quantization, and hardware-aware zero-shot neural architecture search (NAS). Starting from MCUNet as a compact baseline, we analyze how model compression and automated architecture optimization affect model size, computational complexity, and memory usage while maintaining task performance. Experiments on a GNSS interference dataset, covering both classification and generalized characterization, show the benefits of combining compression and hardware-aware design for embedded deployment. Our results provide practical guidance for developing compact machine learning (ML) models for real-time GNSS interference monitoring on embedded platforms (iMXRT1062 MCU, Raspberry Pi Zero 2W, and Raspberry Pi 5).

cs.LG↗

arXiv2026

Physics-Informed Domain-Invariant Feature Learning with Autoencoder-Driven Gaussian Clustering for Robust Non-line-of-Sight Scenarios

Jamming and spoofing pose significant threats to wireless and satellite navigation by disrupting radio-frequency (RF) signals and compromising availability and integrity. Robust RF interference direction finding through angle-of-arrival (AoA) estimation is therefore essential for detecting and localizing anomalous signals. Although data-driven methods perform well under line-of-sight (LoS) conditions, their performance degrades in practical environments due to non-line-of-sight (NLoS) multipath propagation. In this work, we propose a hybrid learning framework that incorporates physics-informed constraints into deep neural networks to improve the robustness of AoA estimation. A neural network is trained to estimate the azimuth and elevation of incoming signals received by a four-element antenna array, while a physics-informed loss enforces consistency between the predicted angles and inter-antenna phase differences under a plane-wave model. We further introduce a latent-space classifier to distinguish LoS from NLoS samples. Since inter-antenna phase differences under LoS propagation exhibit domain-invariant structure across environments, the physics-based loss is applied only to LoS samples, promoting physically consistent and domain-invariant representations without over-constraining the model in NLoS scenarios. In addition, domain-incremental learning (DIL) across NLoS environments with varying scatterer distributions improves cross-domain generalization. Evaluations on real-world datasets show that the proposed method reduces AoA estimation error by up to 6{\deg} in low-exemplar settings compared with DIL baselines.

eess.SP↗

arXiv2026

Receiver-Aware Analysis and Verification of the Spectral Separation Coefficient Under Interference-Induced Degradation

Interference poses a significant challenge to satellite-based positioning systems, making it essential to accurately quantify the effects of specific interference types on receiver performance and the resulting reliability of position computation. In current practice, interference effects are often quantified using receiver-independent metrics, with receiver-specific front-end characteristics either idealized or only implicitly considered. In this paper, we address this limitation by explicitly incorporating receiver-specific front-end characteristics into the computation of interference effects and validating the resulting receiver-dependent analysis experimentally. Therefore, we record a real-world open-field dataset comprising 210 distinct interference scenarios and compute the receiver-dependent spectral separation coefficient (SSC) and interference impact for a specific receiver module. Furthermore, we verify the computation using a controlled dataset generated with a radio frequency constellation simulator (RFCS), employing the same receiver module and replaying similar interferences classes. The comparison of results obtained in both environments demonstrates the robustness of the interference impact computation.

eess.SP↗

arXiv2026

GenAI for Energy-Efficient and Interference-Aware Compressed Sensing of GNSS Signals on a Google Edge TPU

Traditional methods for classifying global navigation satellite system (GNSS) jamming signals typically involve post-processing raw or spectral data streams, requiring complex and costly data transmission to cloud-based interference classification systems. In contrast, our proposed approach efficiently compresses GNSS data streams directly at the hardware receiver while simultaneously classifying jamming and spoofing attacks in real time. Given the growing prevalence of GNSS jamming, there is a critical need for real-time solutions suitable for power-constrained environments. This paper introduces a novel method for compressing and classifying GNSS jamming threats using generative artificial intelligence (GenAI), specifically variational autoencoders (VAEs), deployed on Google Edge tensor processing units (TPUs). The study evaluates various autoencoder (AE) architectures to compress and reconstruct GNSS signals, focusing on preserving interference characteristics while minimizing data size near the receiver hardware. The pipeline adapts large-scale AE models for Google Edge TPUs through 8-bit quantization to ensure energy-efficient deployment. Tests on raw in-phase and quadrature-phase (IQ) data, Fast Fourier Transform (FFT) data, and handcrafted features show the system achieves significant compression (>42x) and accurate classification of approximately 72 interference types on reconstructed signals (F2-score 0.915), closely matching the original signals (F2-score 0.923). The hardware-centric GenAI approach also substantially reduces jammer signal transmission costs, offering a practical solution for interference mitigation. Ablation studies on conditional and factorized VAEs (i.e., FactorVAE) explore latent feature disentanglement for data generation, enhancing model interpretability and fostering trust in machine learning (ML) solutions for sensitive interference applications.

cs.LG↗

arXiv2026

Exploitation of Hidden Context in Dynamic Movement Forecasting: A Neural Network Journey from Recurrent to Graph Neural Networks and General Purpose Transformers

Forecasting within signal processing pipelines is crucial for mitigating delays, particularly in predicting the dynamic movements of objects such as NBA players. This task poses significant challenges due to the inherently interactive and unpredictable nature of sports, where abrupt changes in velocity and direction are prevalent. Traditional approaches, including (S)ARIMA(X), Kalman filters (KF), and Particle filters (PF), often struggle to model the non-linear dynamics present in such scenarios. Machine learning (ML) methods, such as long short-term memory (LSTM) networks, graph neural networks (GNNs), and Transformers, offer greater flexibility and accuracy but frequently fail to explicitly capture the interplay between temporal dependencies and contextual interactions, which are critical in chaotic sports environments. In this paper, we evaluate these models and assess their strengths and weaknesses. Experimental results reveal key performance trade-offs across input history length, generalizability, and the ability to incorporate contextual information. ML-based methods demonstrated substantial improvements over linear models across forecast horizons of up to 2s. Among the tested architectures, our hybrid LSTM augmented with contextual information achieved the lowest final displacement error (FDE) of 1.51m, outperforming temporal convolutional neural network (TCNN), graph attention network (GAT), and Transformers, while also requiring less data and training time compared to GAT and Transformers. Our findings indicate that no single architecture excels across all metrics, emphasizing the need for task-specific considerations in trajectory prediction for fast-paced, dynamic environments such as NBA gameplay.

cs.LG↗

arXiv2026

Active Sensing with Meta-Reinforcement Learning for Emitter Localization from RF Observations

Global navigation satellite system (GNSS) interference poses a serious threat to reliable positioning, especially in indoor and multipath-rich environments where source localization is highly challenging. In this paper, we formulate GNSS interference localization as an active sensing problem and propose a reinforcement learning (RL) framework in which an agent sequentially explores the environment to infer the position of an emitter source from radio frequency (RF) observations acquired with a 2x2 patch antenna. The localization task is modeled as a partially observable decision process, since single-snapshot measurements are often ambiguous under multipath propagation and changing channel conditions. To address this, the proposed framework combines high-dimensional RF sensing with deep RL and recurrent policy learning. We investigate both value-based and policy-based approaches, namely Deep Q-Networks (DQN) and Proximal Policy Optimization (PPO), and study their behavior under domain shift. The approach is evaluated on a simulated dataset generated with the Sionna ray-tracing module, which provides realistic propagation effects and diverse environment configurations. Experimental results show that the proposed method achieves a localization success rate of 80.1, demonstrating the potential of RL for adaptive GNSS interference localization. Overall, the results highlight simulation-assisted training as a promising direction for robust interference localization in challenging propagation environments.

eess.SP↗

arXiv2025

GNSS Jammer Direction Finding in Dynamic Scenarios Using an Inertial-based Multi-Antenna System

Jamming devices disrupt signals from the global navigation satellite system (GNSS) and pose a significant threat by compromising the reliability of accurate positioning. Consequently, the detection and localization of these interference signals are essential to achieve situational awareness, mitigating their impact, and implementing effective countermeasures. In this paper, we utilize a two-times-two patch antenna system (i.e., the software defined radio device Ettus USRP X440) to predict the angle, elevation, and distance to the jamming source based on in-phase and quadrature (IQ) samples. We propose to use an inertial measurement unit (IMU) attached to the antenna system to predict the relative movement of the antenna in dynamic scenarios. We present a synthetic aperture system that enables coherent spatial imaging using platform motion to synthesize larger virtual apertures, offering superior angular resolution without mechanically rotating antennas. While classical angle-of-arrival (AoA) methods exhibit reduced accuracy in multipath environments due to signal reflections and scattering, leading to localization errors, we utilize a methodology that fuses IQ and Fast Fourier Transform (FFT)-computed spectrograms with 22 AoA features and the predicted relative movement to enhance GNSS jammer direction finding.

eess.SP↗

arXiv2025

Attention-Based Fusion of IQ and FFT Spectrograms with AoA Features for GNSS Jammer Localization

Jamming devices disrupt signals from the global navigation satellite system (GNSS) and pose a significant threat by compromising the reliability of accurate positioning. Consequently, the detection and localization of these interference signals are essential to achieve situational awareness, mitigating their impact, and implementing effective counter-measures. Classical Angle of Arrival (AoA) methods exhibit reduced accuracy in multipath environments due to signal reflections and scattering, leading to localization errors. Additionally, AoA-based techniques demand substantial computational resources for array signal processing. In this paper, we propose a novel approach for detecting and classifying interference while estimating the distance, azimuth, and elevation of jamming sources. Our benchmark study evaluates 128 vision encoder and time-series models to identify the highest-performing methods for each task. We introduce an attention-based fusion framework that integrates in-phase and quadrature (IQ) samples with Fast Fourier Transform (FFT)-computed spectrograms while incorporating 22 AoA features to enhance localization accuracy. Furthermore, we present a novel dataset of moving jamming devices recorded in an indoor environment with dynamic multipath conditions and demonstrate superior performance compared to state-of-the-art methods.

eess.SP↗

arXiv2025

5G-DIL: Domain Incremental Learning with Similarity-Aware Sampling for Dynamic 5G Indoor Localization

Indoor positioning based on 5G data has achieved high accuracy through the adoption of recent machine learning (ML) techniques. However, the performance of learning-based methods degrades significantly when environmental conditions change, thereby hindering their applicability to new scenarios. Acquiring new training data for each environmental change and fine-tuning ML models is both time-consuming and resource-intensive. This paper introduces a domain incremental learning (DIL) approach for dynamic 5G indoor localization, called 5G-DIL, enabling rapid adaptation to environmental changes. We present a novel similarity-aware sampling technique based on the Chebyshev distance, designed to efficiently select specific exemplars from the previous environment while training only on the modified regions of the new environment. This avoids the need to train on the entire region, significantly reducing the time and resources required for adaptation without compromising localization accuracy. This approach requires as few as 50 exemplars from adaptation domains, significantly reducing training time while maintaining high positioning accuracy in previous environments. Comparative evaluations against state-of-the-art DIL techniques on a challenging real-world indoor dataset demonstrate the effectiveness of the proposed sample selection method. Our approach is adaptable to real-world non-line-of-sight propagation scenarios and achieves an MAE positioning error of 0.261 meters, even under dynamic environmental conditions. Code: https://gitlab.cc-asp.fraunhofer.de/5g-pos/5g-dil

cs.CV↗

arXiv2025

VAE-based Feature Disentanglement for Data Augmentation and Compression in Generalized GNSS Interference Classification

Distributed learning and Edge AI necessitate efficient data processing, low-latency communication, decentralized model training, and stringent data privacy to facilitate real-time intelligence on edge devices while reducing dependency on centralized infrastructure and ensuring high model performance. In the context of global navigation satellite system (GNSS) applications, the primary objective is to accurately monitor and classify interferences that degrade system performance in distributed environments, thereby enhancing situational awareness. To achieve this, machine learning (ML) models can be deployed on low-resource devices, ensuring minimal communication latency and preserving data privacy. The key challenge is to compress ML models while maintaining high classification accuracy. In this paper, we propose variational autoencoders (VAEs) for disentanglement to extract essential latent features that enable accurate classification of interferences. We demonstrate that the disentanglement approach can be leveraged for both data compression and data augmentation by interpolating the lower-dimensional latent representations of signal power. To validate our approach, we evaluate three VAE variants - vanilla, factorized, and conditional generative - on four distinct datasets, including two collected in controlled indoor environments and two real-world highway datasets. Additionally, we conduct extensive hyperparameter searches to optimize performance. Our proposed VAE achieves a data compression rate ranging from 512 to 8,192 and achieves an accuracy up to 99.92%.

cs.LG↗

arXiv2025

Evaluation of (Un-)Supervised Machine Learning Methods for GNSS Interference Classification with Real-World Data Discrepancies

The accuracy and reliability of vehicle localization on roads are crucial for applications such as self-driving cars, toll systems, and digital tachographs. To achieve accurate positioning, vehicles typically use global navigation satellite system (GNSS) receivers to validate their absolute positions. However, GNSS-based positioning can be compromised by interference signals, necessitating the identification, classification, determination of purpose, and localization of such interference to mitigate or eliminate it. Recent approaches based on machine learning (ML) have shown superior performance in monitoring interference. However, their feasibility in real-world applications and environments has yet to be assessed. Effective implementation of ML techniques requires training datasets that incorporate realistic interference signals, including real-world noise and potential multipath effects that may occur between transmitter, receiver, and satellite in the operational area. Additionally, these datasets require reference labels. Creating such datasets is often challenging due to legal restrictions, as causing interference to GNSS sources is strictly prohibited. Consequently, the performance of ML-based methods in practical applications remains unclear. To address this gap, we describe a series of large-scale measurement campaigns conducted in real-world settings at two highway locations in Germany and the Seetal Alps in Austria, and in large-scale controlled indoor environments. We evaluate the latest supervised ML-based methods to report on their performance in real-world settings and present the applicability of pseudo-labeling for unsupervised learning. We demonstrate the challenges of combining datasets due to data discrepancies and evaluate outlier detection, domain adaptation, and data augmentation techniques to present the models' capabilities to adapt to changes in the datasets.

cs.CV↗

arXiv2025

Multimodal-to-Text Prompt Engineering in Large Language Models Using Feature Embeddings for GNSS Interference Characterization

Large language models (LLMs) are advanced AI systems applied across various domains, including NLP, information retrieval, and recommendation systems. Despite their adaptability and efficiency, LLMs have not been extensively explored for signal processing tasks, particularly in the domain of global navigation satellite system (GNSS) interference monitoring. GNSS interference monitoring is essential to ensure the reliability of vehicle localization on roads, a critical requirement for numerous applications. However, GNSS-based positioning is vulnerable to interference from jamming devices, which can compromise its accuracy. The primary objective is to identify, classify, and mitigate these interferences. Interpreting GNSS snapshots and the associated interferences presents significant challenges due to the inherent complexity, including multipath effects, diverse interference types, varying sensor characteristics, and satellite constellations. In this paper, we extract features from a large GNSS dataset and employ LLaVA to retrieve relevant information from an extensive knowledge base. We employ prompt engineering to interpret the interferences and environmental factors, and utilize t-SNE to analyze the feature embeddings. Our findings demonstrate that the proposed method is capable of visual and logical reasoning within the GNSS context. Furthermore, our pipeline outperforms state-of-the-art machine learning models in interference classification tasks.

cs.AI↗

arXiv2024

Federated Learning with MMD-based Early Stopping for Adaptive GNSS Interference Classification

Federated learning (FL) enables multiple devices to collaboratively train a global model while maintaining data on local servers. Each device trains the model on its local server and shares only the model updates (i.e., gradient weights) during the aggregation step. A significant challenge in FL is managing the feature distribution of novel and unbalanced data across devices. In this paper, we propose an FL approach using few-shot learning and aggregation of the model weights on a global server. We introduce a dynamic early stopping method to balance out-of-distribution classes based on representation learning, specifically utilizing the maximum mean discrepancy of feature embeddings between local and global models. An exemplary application of FL is to orchestrate machine learning models along highways for interference classification based on snapshots from global navigation satellite system (GNSS) receivers. Extensive experiments on four GNSS datasets from two real-world highways and controlled environments demonstrate that our FL method surpasses state-of-the-art techniques in adapting to both novel interference classes and multipath scenarios.

cs.LG↗

arXiv2024

Achieving Generalization in Orchestrating GNSS Interference Monitoring Stations Through Pseudo-Labeling

The accuracy of global navigation satellite system (GNSS) receivers is significantly compromised by interference from jamming devices. Consequently, the detection of these jammers are crucial to mitigating such interference signals. However, robust classification of interference using machine learning (ML) models is challenging due to the lack of labeled data in real-world environments. In this paper, we propose an ML approach that achieves high generalization in classifying interference through orchestrated monitoring stations deployed along highways. We present a semi-supervised approach coupled with an uncertainty-based voting mechanism by combining Monte Carlo and Deep Ensembles that effectively minimizes the requirement for labeled training samples to less than 5% of the dataset while improving adaptability across varying environments. Our method demonstrates strong performance when adapted from indoor environments to real-world scenarios.

eess.SP↗

arXiv2024

Evaluating ML Robustness in GNSS Interference Classification, Characterization & Localization

Jamming devices disrupt signals from the global navigation satellite system (GNSS) and pose a significant threat, as they compromise the robustness of accurate positioning. The detection of anomalies within frequency snapshots is crucial to counteract these interferences effectively. A critical preliminary countermeasure involves the reliable classification of interferences and the characterization and localization of jamming devices. This paper introduces an extensive dataset comprising snapshots obtained from a low-frequency antenna that capture various generated interferences within a large-scale environment, including controlled multipath effects. Our objective is to assess the resilience of machine learning (ML) models against environmental changes, such as multipath effects, variations in interference attributes, such as interference class, bandwidth, and signal power, the accuracy of jamming device localization, and the constraints imposed by snapshot input lengths. Furthermore, we evaluate the performance of a diverse set of 129 distinct vision encoder models across all tasks. By analyzing the aleatoric and epistemic uncertainties, we demonstrate the adaptability of our model in generalizing across diverse facets, thus establishing its suitability for real-world applications. Dataset: https://gitlab.cc-asp.fraunhofer.de/darcy_gnss/controlled_low_frequency

cs.AI↗