SearcharxivSearch

arXiv subjects

M. Leroux

Publications and source records attributed to M. Leroux.

14 recordsLinked to original sources

Compartmentalizing the cuprate strange metal

It has long been recognized that the key to unlocking the mystery of cuprate high-Tc superconductivity lies in understanding the anomalous normal state from which pairs form and condense. While many of its defining properties have been identified, they are often considered either at a singular doping level or as an isolated phenomenon as a function of doping. As a result, their relation to each other and to the pseudogap (PG), strange metal (SM) and non-superconducting (non-SC) regimes that define the cuprate phase diagram has yet to be elucidated. Here, we report a high-field in-plane MR study on several cuprate families spanning all 3 regimes that reveal a complex yet nonetheless systematic evolution of the form of the MR, with each regime possessing its own distinct scaling behavior. In the PG regime, the MR exhibits pure H/T^2 scaling at low fields and H-linearity at the highest field strengths. While the H-linearity persists inside the SM regime, the scaling changes abruptly to H/T. The size of the H-linear slope, meanwhile, is found to be correlated with both the T-linear resistivity coefficient and Tc, strengthening the characterization of the SM regime as a quantum critical phase. We interpret the omnipresence of H-linear MR across both regimes as a signature of highly anisotropic, possibly discontinuous features on the Fermi surface. Finally, within the non-SC, Fermi-liquid regime, we observe a recovery of conventional Kohler scaling. This comprehensive study establishes the distinct nature of the magnetotransport within each regime and identifies power-law scaling of the normal state MR as a defining feature of SC hole-doped cuprates. The incompatibility of such power-law scaling with any known variant of Boltzmann transport theory motivates the quest for an altogether new theoretical framework, one in which the MR is entirely decoupled from elastic impurity scattering.

cond-mat.supr-con

Evidence for antiferromagnetism coexisting with charge order in the trilayer cuprate HgBa$_2$Ca$_2$Cu$_3$O$_{8+ \delta}$

Multilayered cuprates possess not only the highest superconducting temperature transition but also offer a unique platform to study disorder-free CuO$_2$ planes and the interplay between competing orders with superconductivity. Here, we study the underdoped trilayer cuprate HgBa$_2$Ca$_2$Cu$_3$O$_{8+ \delta}$ and we report the first quantum oscillation and Hall effect measurements in magnetic field up to 88 T. A careful analysis of the complex spectra of quantum oscillations strongly supports the coexistence of an antiferromagnetic order in the inner plane and a charge order in the outer planes. The presence of an ordered antiferromagnetic metallic state that extends deep in the superconducting phase is a key ingredient that supports magnetically mediated pairing interaction in cuprates.

cond-mat.supr-con

Skyrmion lattice creep at ultra-low current densities

Magnetic skyrmions are well-suited for encoding information because they are nano-sized, topologically stable, and only require ultra-low critical current densities $j_c$ to depin from the underlying atomic lattice. Above $j_c$ skyrmions exhibit well-controlled motion, making them prime candidates for race-track memories. In thin films thermally-activated creep motion of isolated skyrmions was observed below $j_c$ as predicted by theory. Uncontrolled skyrmion motion is detrimental for race-track memories and is not fully understood. Notably, the creep of skyrmion lattices in bulk materials remains to be explored. Here we show using resonant ultrasound spectroscopy--a probe highly sensitive to the coupling between skyrmion and atomic lattices--that in the prototypical skyrmion lattice material MnSi depinning occurs at $j_c^*$ that is only 4 percent of $j_c$. Our experiments are in excellent agreement with Anderson-Kim theory for creep and allow us to reveal a new dynamic regime at ultra-low current densities characterized by thermally-activated skyrmion-lattice-creep with important consequences for applications.

cond-mat.str-el

Competition between horizontal and vertical polariton lasing in planar microcavities

Planar microcavities filled with active materials containing excitonic resonances host radiative exciton-polariton (polariton) modes with in-plane wave vectors within the light cone. They also host at least one mode guided in the cavity plane by total internal reflection and which is not radiatively coupled to the vacuum modes except through defects or sample edges. We show that polariton lasing mediated by polariton stimulated scattering can occur concomitantly in both types of modes in a microcavity. By adjusting the detuning between the exciton and the radiative photon mode one can favor polariton lasing either in the radiative or in the guided modes. Our results suggest that the competition between these two types of polariton lasing modes may have played a role in many previous observations of polariton lasing and polariton Bose Einstein condensation.

cond-mat.mes-hall

Edge-emitting polariton laser and amplifier based on a ZnO waveguide

We demonstrate edge-emitting exciton-polariton (polariton) lasing from 5 to 300 K and amplification of non-radiative guided polariton modes within ZnO waveguides. The mode dispersion below and above the lasing threshold is directly measured using gratings present on top of the sample, fully demonstrating the polaritonic nature of the lasing modes. The threshold is found to be similar to that of radiative polarions in planar ZnO microcavities. These results open broad perspectives for guided polaritonics by allowing an easier and more straightforward implementation of polariton integrated circuits exploiting fast propagating polaritons.

cond-mat.mes-hall

Elasticity in the skyrmion phase unveils depinning at ultra-low current densities

Controlled movement of nano-scale stable magnetic objects has been proposed as the foundation for a new generation of magnetic storage devices. Magnetic skyrmions, vortex-like spin textures stabilized by their topology are particularly promising candidates for this technology. Their nanometric size and ability to be displaced in response to an electrical current density several orders of magnitude lower than required to induce motion of magnetic domain walls suggest their potential for high-density memory devices that can be operated at low power. However, to achieve this, skyrmion movement needs to be controlled, where a key question concerns the coupling of skyrmions with the underlying atomic lattice and disorder (pinning). Here, we use Resonant Ultrasound Spectroscopy (RUS), a probe highly sensitive to changes in the elastic properties, to shed new light on skyrmion elasticity and depinning in the archetypal skyrmion material MnSi. In MnSi, skyrmions form a lattice that leads to pronounced changes in the elastic properties of the atomic lattice as a result of magneto-crystalline coupling. Without an applied current, the shear and compressional moduli of the underlying crystal lattice exhibit an abrupt change in the field-temperature range where skyrmions form. For current densities exceeding $j_c^*$ the changes of elastic properties vanish, signaling the decoupling of skyrmion and atomic lattices. Interestingly, $j_c^*$, which we identify as the onset of skyrmion depinning, is about 20 times smaller than $j_c$ previously measured via non-linear Hall effect. Our results suggest the presence of a previously-undetected intermediate dynamic regime possibly dominated by skyrmion-creep motion with important consequences for potential applications.

cond-mat.str-el

Decoupling and tuning competing effects of different types of defects on flux creep in irradiated YBa$_{2}$Cu$_{3}$O$_{7-δ}$ coated conductors

YBa$_{2}$Cu$_{3}$O$_{7-δ}$ coated conductors (CCs) have achieved high critical current densities ($\textit{J}_{c}$) that can be further increased through the introduction of additional defects using particle irradiation. However, these gains are accompanied by increases in the flux creep rate, a manifestation of competition between the different types of defects. Here, we study this competition to better understand how to design pinning landscapes that simultaneously increase $\textit{J}_{c}$ and reduce creep. CCs grown by metal organic deposition show non-monotonic changes in the temperature-dependent creep rate, $\textit{S}(\textit{T})$. Notably, in low fields, there is a conspicuous dip to low $\textit{S}$ as temperature ($\textit{T}$) increases from ~20 K to ~65 K. Oxygen-, proton-, and Au-irradiation substantially increase $\textit{S}$ in this temperature range. Focusing on an oxygen-irradiated CC, we investigate the contribution of different types of irradiation-induced defects to the flux creep rate. Specifically, we study $\textit{S}(\textit{T})$ as we tune the relative density of point defects to larger defects by annealing both an as-grown and an irradiated CC in O$_{2}$ at temperatures $\textit{T}_{A}$ = 250$°$C to 600$°$C. We observe a steady decrease in $\textit{S}$($\textit{T}$ > 20 K) with increasing $\textit{T}_{A}$, unveiling the role of pre-existing nanoparticle precipitates in creating the dip in $\textit{S}(\textit{T})$ and point defects and clusters in increasing $\textit{S}$ at intermediate temperatures.

cond-mat.supr-con

Toward superconducting critical current by design

We present the new paradigm of critical current by design. Analogous to materials by design, it aims at predicting the optimal defect landscape in a superconductor for targeted applications by elucidating the vortex dynamics responsible for the bulk critical current. To highlight this approach, we demonstrate the synergistic combination of critical current measurements on commercial high-temperature superconductors containing self-assembled and irradiation tailored correlated defects by using large-scale time-dependent Ginzburg-Landau simulations for vortex dynamics.

cond-mat.supr-con

Simulation of the vortex dynamics in a real pinning landscape of YBa$_2$Cu$_3$O$_{7-δ}$ coated conductors

The ability of high-temperature superconductors (HTSs) to carry very large currents with almost no dissipation makes them irreplaceable for high-power applications. The development and further improvement of HTS-based cables requires an in-depth understanding of the superconducting vortex dynamics in presence of complex pinning landscapes. We present a critical current analysis of a real HTS sample in a magnetic field by combining state-of-the-art large-scale Ginzburg-Landau simulations with reconstructive three-dimensional scanning transmission electron microscopy tomography of the pinning landscape in Dy-doped YBa$_2$Cu$_3$O$_{7-δ}$. This methodology provides a unique look at the vortex dynamics in the presence of a complex pinning landscape, responsible for the high current-carrying capacity characteristic of commercial HTS wires. Our method demonstrates very good functional and quantitative agreement of the critical current between simulation and experiment, providing a new predictive tool for HTS wires design.

cond-mat.supr-con

Polariton condensation phase diagram in wide bandgap planar microcavities: GaN versus ZnO

GaN and ZnO microcavities have been grown on patterned silicon substrate. Thanks to a common platform these microcavities share similar photonic properties with large quality factors and low photonic disorder which gives the possibility to determine the optimal spot diameter and to realize a complete comparative phase diagram study. Both systems have been investigated under the same experimental condition. Experimental results are well reproduced by simulation using Boltzmann equations. Lower polariton lasing threshold has been measured at low temperature in the ZnO microcavity as expected due to a larger Rabi splitting. However the threshold is strongly impacted by LO phonons through phonon-assisted polariton relaxation. We observe and discuss this effect as a function of temperature and detuning. Finally the polariton lasing threshold at room temperature is quite similar in both microcavities. This study highlights polariton relaxation mechanism and their importance for threshold optimization.

cond-mat.mtrl-sci

Patterned silicon substrates: a common platform for room temperature GaN and ZnO polariton lasers

A new platform for fabricating polariton lasers operating at room temperature is introduced: nitride-based distributed Bragg reflectors epitaxially grown on patterned silicon substrates. The patterning allows for an enhanced strain relaxation thereby enabling to stack a large number of crack-free AlN/AlGaN pairs and achieve cavity quality factors of several thousands with a large spatial homogeneity. GaN and ZnO active regions are epitaxially grown thereon and the cavities are completed with top dielectric Bragg reflectors. The two structures display strong-coupling and polariton lasing at room temperature and constitute an intermediate step in the way towards integrated polariton devices.

cond-mat.mes-hall

LO-phonon assisted polariton lasing in a ZnO based microcavity

Polariton relaxation mechanisms are analysed experimentally and theoretically in a ZnO-based polariton laser. A minimum lasing threshold is obtained when the energy difference between the exciton reservoir and the bottom of the lower polariton branch is resonant with the LO phonon energy. Tuning off this resonance increases the threshold, and exciton-exciton scattering processes become involved in the polariton relaxation. These observations are qualitatively reproduced by simulations based on the numerical solution of the semi-classical Boltzmann equations.

cond-mat.mtrl-sci

Fabrication and Optical Properties of a Fully Hybrid Epitaxial ZnO-Based Microcavity in the Strong Coupling Regime

In order to achieve polariton lasing at room temperature, a new fabrication methodology for planar microcavities is proposed: a ZnO-based microcavity in which the active region is epitaxially grown on an AlGaN/AlN/Si substrate and in which two dielectric mirrors are used. This approach allows as to simultaneously obtain a high-quality active layer together with a high photonic confinement as demonstrated through macro-, and micro-photoluminescence (μ-PL) and reflectivity experiments. A quality factor of 675 and a maximum PL emission at k=0 are evidenced thanks to μ-PL, revealing an efficient polaritonic relaxation even at low excitation power.

cond-mat.mtrl-sci

Influence of the mirrors on the strong coupling regime in planar GaN microcavities

The optical properties of bulk $λ/2$ GaN microcavities working in the strong light-matter coupling regime are investigated using angle-dependent reflectivity and photoluminescence at 5 K and 300 K. The structures have an Al$_{0.2}$Ga$_{0.8}$N/AlN distributed Bragg reflector as the bottom mirror and either an aluminium mirror or a dielectric Bragg mirror as the top one. First, the influence of the number of pairs of the bottom mirror on the Rabi splitting is studied. The increase of the mirror penetration depth is correlated with a reduction of the Rabi splitting. Second, the emission of the lower polariton branch is observed at low temperature in a microcavity containing two Bragg mirrors and exibiting a quality factor of 190. Our simulations using the transfer-matrix formalism, taking into account the real structure of the samples investigated are in good agreement with experimental results.

cond-mat.mtrl-sci