Searcharxiv⌕ Search

arXiv subjects

M. Weides

Publications and source records attributed to M. Weides.

At least 37 records · Page 2Linked to original sources

Wirebond crosstalk and cavity modes in large chip mounts for superconducting qubits

We analyze the performance of a microwave chip mount that uses wirebonds to connect the chip and mount grounds. A simple impedance ladder model predicts that transmission crosstalk between two feedlines falls off exponentially with distance at low frequencies, but rises to near unity above a resonance frequency set by the chip to ground capacitance. Using SPICE simulations and experimental measurements of a scale model, the basic predictions of the ladder model were verified. In particular, by decreasing the capacitance between the chip and box grounds, the resonance frequency increased and transmission decreased. This model then influenced the design of a new mount that improved the isolation to -65 dB at 6 GHz, even though the chip dimensions were increased to 1 cm by 1 cm, 3 times as large as our previous devices. We measured a coplanar resonator in this mount as preparation for larger qubit chips, and were able to identify cavity, slotline, and resonator modes.

cond-mat.supr-con↗

Deterministic entanglement of photons in two superconducting microwave resonators

Quantum entanglement, one of the defining features of quantum mechanics, has been demonstrated in a variety of nonlinear spin-like systems. Quantum entanglement in linear systems has proven significantly more challenging, as the intrinsic energy level degeneracy associated with linearity makes quantum control more difficult. Here we demonstrate the quantum entanglement of photon states in two independent linear microwave resonators, creating N-photon NOON states as a benchmark demonstration. We use a superconducting quantum circuit that includes Josephson qubits to control and measure the two resonators, and we completely characterize the entangled states with bipartite Wigner tomography. These results demonstrate a significant advance in the quantum control of linear resonators in superconducting circuits.

quant-ph↗

Critical current diffraction pattern of SIFS Josephson junctions with step-like F-layer

We present the latest generation of superconductor-insulator-ferromagnet-superconductor Josephson tunnel junctions with a step-like thickness of the ferromagnetic (F) layer. The F-layer thicknesses $d_1$ and $d_2$ in both halves were varied to obtain different combinations of positive and negative critical current densities $j_{c,1}$ and $j_{c,2}$. The measured dependences of the critical current on applied magnetic field can be well described by a model which takes into account different critical current densities (obtained from reference junctions) and different net magnetization of the multidomain ferromagnetic layer in both halves.

cond-mat.supr-con↗

Demonstration of a Tuneable Coupler for Superconducting Qubits Using Coherent, Time Domain, Two-Qubit Operations

A major challenge in the field of quantum computing is the construction of scalable qubit coupling architectures. Here, we demonstrate a novel tuneable coupling circuit that allows superconducting qubits to be coupled over long distances. We show that the inter-qubit coupling strength can be arbitrarily tuned over nanosecond timescales within a sequence that mimics actual use in an algorithm. The coupler has a measured on/off ratio of 1000. The design is self-contained and physically separate from the qubits, allowing the coupler to be used as a module to connect a variety of elements such as qubits, resonators, amplifiers, and readout circuitry over long distances. Such design flexibility is likely to be essential for a scalable quantum computer.

quant-ph↗

Quantum process tomography of two-qubit controlled-Z and controlled-NOT gates using superconducting phase qubits

We experimentally demonstrate quantum process tomography of controlled-Z and controlled-NOT gates using capacitively-coupled superconducting phase qubits. These gates are realized by using the $|2\rangle$ state of the phase qubit. We obtain a process fidelity of 0.70 for the controlled-phase and 0.56 for the controlled-NOT gate, with the loss of fidelity mostly due to single-qubit decoherence. The controlled-Z gate is also used to demonstrate a two-qubit Deutsch-Jozsa algorithm with a single function query.

cond-mat.mes-hall↗

Generation of Three-Qubit Entangled States using Superconducting Phase Qubits

Entanglement is one of the key resources required for quantum computation, so experimentally creating and measuring entangled states is of crucial importance in the various physical implementations of a quantum computer. In superconducting qubits, two-qubit entangled states have been demonstrated and used to show violations of Bell's Inequality and to implement simple quantum algorithms. Unlike the two-qubit case, however, where all maximally-entangled two-qubit states are equivalent up to local changes of basis, three qubits can be entangled in two fundamentally different ways, typified by the states $|\mathrm{GHZ}> = (|000> + |111>)/\sqrt{2}$ and $|\mathrm{W}> = (|001> + |010> + |100>)/\sqrt{3}$. Here we demonstrate the operation of three coupled superconducting phase qubits and use them to create and measure $|\mathrm{GHZ}>$ and $|\mathrm{W}>$ states. The states are fully characterized using quantum state tomography and are shown to satisfy entanglement witnesses, confirming that they are indeed examples of three-qubit entanglement and are not separable into mixtures of two-qubit entanglement.

cond-mat.supr-con↗

Interference patterns of multifacet 20x(0-pi-) Josephson junctions with ferromagnetic barrier

We have realized multifacet Josephson junctions with periodically alternating critical current density (MJJs) using superconductor-insulator-ferromagnet-superconductor heterostructures. We show that anomalous features of critical current vs. applied magnetic field, observed also for other types of MJJs, are caused by a non-uniform flux density (parallel to the barrier) resulting from screening currents in the electrodes in the presence of a (parasitic) off-plane field component.

cond-mat.supr-con↗

Evidence for triplet superconductivity in Josephson junctions with ferromagnetic Cu$_{2}$MnAl-Heusler barriers

We have studied Josephson junctions with barriers prepared from the Heusler compound Cu$_2$MnAl. In the as-prepared state the Cu$_2$MnAl layers are non ferromagnetic and the critical Josephson current density $j_{c}$ decreases exponentially with the thickness of the Heusler layers $d_{F}$. On annealing the junctions at 240\degree C the Heusler layers develop ferromagnetic order and we observe a dependence $j_{c}(d_{F}$) with $j_{c}$ strongly enhanced and weakly thickness dependent in the thickness range 7.0 nm < $d_{F}$ < 10.6 nm. We attribute this feature to a triplet component in the superconducting pairing function generated by the specific magnetization profile inside thin Cu$_2$MnAl layers.

cond-mat.supr-con↗

Josephson supercurrent in Nb/InN-nanowire/Nb junctions

We experimentally studied the Josephson supercurrent in Nb/InN-nanowire/Nb junctions. Large critical currents up to 5.7 $μ$A have been achieved, which proves the good coupling of the nanowire to the superconductor. The effect of a magnetic field perpendicular to the plane of the Josephson junction on the critical current has been studied. The observed monotonous decrease of the critical current with magnetic field is explained by the magnetic pair-breaking effect in planar Josephson junctions of ultra-narrow width [J. C. Cuevas and F. S. Bergeret, Phys. Rev. Lett. 99, 217002 (2007)]

cond-mat.mes-hall↗

Visualizing supercurrents in ferromagnetic Josephson junctions with various arrangements of 0 and πsegments

Josephson junctions with ferromagnetic barrier can have positive or negative critical current depending on the thickness $d_F$ of the ferromagnetic layer. Accordingly, the Josephson phase in the ground state is equal to 0 (a conventional or 0 junction) or to $π$ ($π$ junction). When 0 and $π$ segments are joined to form a "0-$π$ junction", spontaneous supercurrents around the 0-$π$ boundary can appear. Here we report on the visualization of supercurrents in superconductor-insulator-ferromagnet-superconductor (SIFS) junctions by low-temperature scanning electron microscopy (LTSEM). We discuss data for rectangular 0, $π$, 0-$π$, 0-$π$-0 and 20 \times 0-$π$ junctions, disk-shaped junctions where the 0-$π$ boundary forms a ring, and an annular junction with two 0-$π$ boundaries. Within each 0 or $π$ segment the critical current density is fairly homogeneous, as indicated both by measurements of the magnetic field dependence of the critical current and by LTSEM. The $π$ parts have critical current densities $j_c^π$ up to $35\units{A/cm^2}$ at $T = 4.2\units{K}$, which is a record value for SIFS junctions with a NiCu F-layer so far. We also demonstrate that SIFS technology is capable to produce Josephson devices with a unique topology of the 0-$π$ boundary.

cond-mat.supr-con↗

Magnetic interference patterns in 0-Pi SIFS Josephson junctions: effects of asymmetry between 0 and Pi regions

We present a detailed analysis of the dependence of the critical current I_c on the magnetic field B of 0, Pi, and 0-Pi superconductor-insulator-ferromagnet-superconductor Josephson junctions. I_c(B) of the 0 and Pi junction closely follows a Fraunhofer pattern, indicating a homogeneous critical current density j_c(x). The maximum of I_c(B) is slightly shifted along the field axis, pointing to a small remanent in-plane magnetization of the F-layer along the field axis. I_c(B) of the 0-Pi junction exhibits the characteristic central minimum. I_c however has a finite value here, due to an asymmetry of j_c in the 0 and Pi part. In addition, this I_c(B) exhibits asymmetric maxima and bumped minima. To explain these features in detail, flux penetration being different in the 0 part and the Pi part needs to be taken into account. We discuss this asymmetry in relation to the magnetic properties of the F-layer and the fabrication technique used to produce the 0-Pi junctions.

cond-mat.supr-con↗

Decoherence Dynamics of Complex Photon States in a Superconducting Circuit

Quantum states inevitably decay with time into a probabilistic mixture of classical states, due to their interaction with the environment and measurement instrumentation. We present the first measurement of the decoherence dynamics of complex photon states in a condensed-matter system. By controllably preparing a number of distinct, quantum-superposed photon states in a superconducting microwave resonator, we show that the subsequent decay dynamics can be quantitatively described by taking into account only two distinct decay channels, energy relaxation and dephasing. Our ability to prepare specific initial quantum states allows us to measure the evolution of specific elements in the quantum density matrix, in a very detailed manner that can be compared with theory.

cond-mat.mes-hall↗

Improving the Coherence Time of Superconducting Coplanar Resonators

The quality factor and energy decay time of superconducting resonators have been measured as a function of material, geometry, and magnetic field. Once the dissipation of trapped magnetic vortices is minimized, we identify surface two-level states (TLS) as an important decay mechanism. A wide gap between the center conductor and the ground plane, as well as use of the superconductor Re instead of Al, are shown to decrease loss. We also demonstrate that classical measurements of resonator quality factor at low excitation power are consistent with single-photon decay time measured using qubit-resonator swap experiments.

cond-mat.mes-hall↗

Observation of Josephson coupling through an interlayer of antiferromagnetically ordered chromium

The supercurrent transport in metallic Josephson tunnel junctions with an additional interlayer made up by chromium, being an itinerant antiferromagnet, was studied. Uniform Josephson coupling was observed as a function of the magnetic field. The supercurrent shows a weak dependence on the interlayer thickness for thin chromium layers and decays exponentially for thicker films. The diffusion constant and the coherence length in the antiferromagnet were estimated. The antiferromagnetic state of the barrier was indirectly verified using reference samples. Our results are compared to macroscopic and microscopic models.

cond-mat.supr-con↗

Josephson junctions with centered step and local variation of critical current density

Superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson tunnel junctions based on Nb\Al2O3\Ni\Cu\Nb stacks with a thickness step in the metallic NiCu interlayer were fabricated. The step height of a few 0.1 nm was defined by optical lithography and controlled etching of both Nb and NiCu layers. Experimentally determined junction parameters by current-voltage characteristics and Fraunhofer pattern indicate a uniform NiCu thickness and similar interface transparencies for etched and non-etched parts. The critical current diffraction pattern was calculated and measured for stepped junctions having the same ground phase difference but different critical current densities in both halves. The measured data show a good agreement with simulations.

cond-mat.supr-con↗

Josephson tunnel junctions with ferromagnetic $\Fe_{0.75}\Co_{0.25}$ barriers

Josephson tunnel junctions with the strong ferromagnetic alloy $\Fe_{0.75}\Co_{0.25}$ as the barrier material were studied. The junctions were prepared with high quality down to a thickness range of a few monolayers of Fe-Co. An oscillation length of $ξ_{F2}\approx 0.79\:{\rm {nm}}$ between 0 and $π$-Josephson phase coupling and a very short decay length $ξ_{F1}\approx 0.22\:{\rm {nm}}$ for the amplitude of the superconducting pair wave function in the Fe-Co layer were determined. The rapid damping of the pair wave function inside the Fe-Co layer is caused by the strong ferromagnetic exchange field and additional magnetic pair breaking scattering. Josephson junctions with Fe-Co barriers show a significantly increased tendency towards magnetic remanence and flux trapping for larger thicknesses $d_{F}$.

cond-mat.supr-con↗

Escape Rate Measurements and Microwave Spectroscopy of 0, pi, and 0-pi ferromagnetic Josephson Tunnel Junctions

We present experimental studies of high quality underdamped 0, pi, and 0-pi ferromagnetic Josephson tunnel junctions of intermediate length L (lambda_J < L < 5 lambda_J, where lambda_J is the Josephson penetration depth). The junctions are fabricated as Nb/Al_2O_3/Cu_40Ni_60/Nb Superconductor-Insulator-Ferromagnet-Superconductor heterostructures. Using microwave spectroscopy, we have investigated the eigenfrequencies of 0, pi, and 0-pi Josephson junctions in the temperature range 1.9K...320mK. Harmonic, subharmonic and superharmonic pumping is observed in experiment, and the experimental data are compared with numerical simulations. Escape rate measurements without applied microwaves at temperatures T down to 20mK show that the width of the switching current histogram decreases with temperature and saturates below T=150mK. We analyze our data in the framework of the short junction model. The differences between experimental data and theoretical predictions are discussed.

cond-mat.supr-con↗

Josephson tunnel junctions with strong ferromagnetic interlayer

The dependence of the critical current density j_c on the ferromagnetic interlayer thickness d_F was determined for Nb/Al_2O_3/Cu/Ni/Nb Josephson tunnel junctions with ferromagnetic \Ni interlayer from very thin film thicknesses (\sim 1 nm) upwards and classified into F-layer thickness regimes showing a dead magnetic layer, exchange, exchange + anisotropy and total suppression of j_c. The Josephson coupling changes from 0 to pi as function of d_F, and -very close to the crossover thickness- as function of temperature. The strong suppression of the supercurrent in comparison to non-magnetic \Nb/Al_2O_3/Cu/Nb junctions indicated that the insertion of a F-layer leads to additional interface scattering. The transport inside the dead magnetic layer was in dirty limit. For the magnetically active regime fitting with both the clean and the dirty limit theory were carried out, indicating dirty limit condition, too. The results were discussed in the framework of literature

cond-mat.supr-con↗