arXiv subjects

Marco Bianchi

Publications and source records attributed to Marco Bianchi.

At least 55 records · Page 3Linked to original sources

arXiv2018

Novel single-layer vanadium sulphide phases

VS2 is a challenging material to prepare stoichiometrically in the bulk, and the single layer has not been successfully isolated before now. Here we report the first realization of single-layer VS2, which we have prepared epitaxially with high quality on Au(111) in the octahedral (1T) structure. We find that we can deplete the VS2 lattice of S by annealing in vacuum so as to create an entirely new two-dimensional compound that has no bulk analogue. The transition is reversible upon annealing in an H2S gas atmosphere. We report the structural properties of both the stoichiometric and S-depleted compounds on the basis of low-energy electron diffraction, X-ray photoelectron spectroscopy and diffraction, and scanning tunneling microscopy experiments.

cond-mat.mtrl-sci↗

arXiv2018

Epitaxial Growth of Single-Orientation High-Quality MoS$_2$ Monolayers

We present a study on the growth and characterization of high-quality single-layer MoS$_2$ with a single orientation, i.e. without the presence of mirror domains. This single orientation of the MoS$_2$ layer is established by means of x-ray photoelectron diffraction. The high quality is evidenced by combining scanning tunneling microscopy with x-ray photoelectron spectroscopy measurements. Spin- and angle-resolved photoemission experiments performed on the sample revealed complete spin-polarization of the valence band states near the K and -K points of the Brillouin zone. These findings open up the possibility to exploit the spin and valley degrees of freedom for encoding and processing information in devices that are based on epitaxially grown materials.

cond-mat.mtrl-sci↗

arXiv2018

Photoemission Investigation of Oxygen Intercalated Epitaxial Graphene on Ru(0001)

We study the formation of epitaxial graphene on Ru(0001) using fast x-ray photoelectron spectroscopy during the growth process. The assignment of different C 1s and Ru 3d core level components and their evolution during the growth process gives a detailed insight into the graphene formation and the strongly varying graphene-Ru interaction strength within the large moire unit cell. Subsequent intercalation of oxygen can be achieved at elevated temperature and the core level spectra show a conversion of the strongly corrugated to quasi free-standing graphene, characterised by a single narrow C 1s component. This conversion and the accompanying flattening of the graphene layer is also confirmed by x-ray photoelectron diffraction. The effect of oxygen intercalation on the electronic structure is studied using angle-resolved photoemission of the valence band states. For graphene/Ru(0001), the strong graphene-substrate hybridisation disrupts the π-band dispersion but oxygen intercalation fully restores the π-band with a strong p-doping that shifts the Dirac point 785 meV above the Fermi level. The doping of the system is highly tunable, as the additional exposure to rubidium can convert the carrier filling to n-type with the Dirac point 970 meV below the Fermi level.

cond-mat.mtrl-sci↗

arXiv2017

Fragility of the Dirac Cone Splitting in Topological Crystalline Insulator Heterostructures

The 'double Dirac cone' 2D topological interface states found on the (001) faces of topological crystalline insulators such as Pb$_{1-x}$Sn$_{x}$Se feature degeneracies located away from time reversal invariant momenta, and are a manifestation of both mirror symmetry protection and valley interactions. Similar shifted degeneracies in 1D interface states have been highlighted as a potential basis for a topological transistor, but realizing such a device will require a detailed understanding of the intervalley physics involved. In addition, the operation of this or similar devices outside of ultra-high vacuum will require encapsulation, and the consequences of this for the topological interface state must be understood. Here we address both topics for the case of 2D surface states using angle-resolved photoemission spectroscopy. We examine bulk Pb$_{1-x}$Sn$_{x}$Se(001) crystals overgrown with PbSe, realizing trivial/topological heterostructures. We demonstrate that the valley interaction that splits the two Dirac cones at each $\bar{X}$ is extremely sensitive to atomic-scale details of the surface, exhibiting non-monotonic changes as PbSe deposition proceeds. This includes an apparent total collapse of the splitting for sub-monolayer coverage, eliminating the Lifshitz transition. For a large overlayer thickness we observe quantized PbSe states, possibly reflecting a symmetry confinement mechanism at the buried topological interface.

cond-mat.mes-hall↗

arXiv2017

Electronic Structure of Fe$_{1.08}$Te bulk crystals and epitaxial FeTe thin films on Bi$_2$Te$_3$

The electronic structure of thin films of FeTe grown on Bi$_2$Te$_3$ is investigated using angle-resolved photoemission spectroscopy, scanning tunneling microscopy and first principles calculations. As a comparison, data from cleaved bulk \FeTe taken under the same experimental conditions is also presented. Due to the substrate and thin film symmetry, FeTe thin films grow on Bi$_2$Te$_3$ in three domains, rotated by 0$^{\circ}$, 120$^{\circ}$, and 240$^{\circ}$. This results in a superposition of photoemission intensity from the domains, complicating the analysis. However, by combining bulk and thin film data, it is possible to partly disentangle the contributions from three domains. We find a close similarity between thin film and bulk electronic structure and an overall good agreement with first principles calculations, assuming a p-doping shift of 65~meV for the bulk and a renormalization factor of around 2. By tracking the change of substrate electronic structure upon film growth, we find indications of an electron transfer from the FeTe film to the substrate. No significant change of the film's electronic structure or doping is observed when alkali atoms are dosed onto the surface. This is ascribed to the film's high density of states at the Fermi energy. This behavior is also supported by the ab-initio calculations.

cond-mat.str-el↗

arXiv2017

Contact-Induced Semiconductor-to-Metal Transition in Single-Layer WS$_2$

Low-resistance ohmic contacts are a challenge for electronic devices based on two-dimensional materials. We show that an atomically precise junction between a two-dimensional semiconductor and a metallic contact can lead to a semiconductor-to-metal transition in the two-dimensional material--a finding which points the way to a possible method of achieving low-resistance junctions. Specifically, single-layer WS$_2$ undergoes a semiconductor-to-metal transition when epitaxially grown on Ag(111), while it remains a direct band gap semiconductor on Au(111). The metallicity of the single layer on Ag(111) is established by lineshape analysis of core level photoemission spectra. Angle-resolved photoemission spectroscopy locates the metallic states near the Q point of the WS$_2$ Brillouin zone. Density functional theory calculations show that the metallic states arise from hybridization between Ag bulk bands and the local conduction band minimum of WS$_2$ near the Q point.

cond-mat.mtrl-sci↗

arXiv2017

Electron-phonon coupling in the spin-split valence band of single layer WS$_2$

The absence of inversion symmetry leads to a strong spin-orbit splitting of the upper valence band of semiconducting single layer transition metal dichalchogenides such as MoS$_2$ or WS$_2$. This permits a direct comparison of the electron-phonon coupling strength in states that only differ by their spin. Here, the electron-phonon coupling in the valence band maximum of single-layer WS$_2$ is studied by first principles calculations and angle-resolved photoemission. The coupling strength is found to be drastically different for the two spin-split branches, with calculated values of $λ_K=$0.0021 and 0.40 for the upper and lower spin-split valence band of the free-standing layer, respectively. This difference is somewhat reduced when including scattering processes involving the Au(111) substrate present in the experiment and the experimental results confirm the strongly branch-dependent coupling strength.

cond-mat.str-el↗

arXiv2017

Quasi one-dimensional metallic band dispersion in the commensurate charge density wave of $1T$-TaS$_2$

The commensurate charge density wave (CDW) in the layered compound $1T$-TaS$_2$ has hitherto mostly been treated as a quasi two-dimensional phenomenon. Recent band structure calculations have, however, predicted that the CDW coexists with a nearly one-dimensional metallic dispersion perpendicular to the crystal planes. Using synchrotron radiation based angle-resolved photoemission spectroscopy, we show that this metallic band does in fact exist. Its occupied band width is in excellent agreement with predictions for a simple $τ_c$ stacking order of the CDW between adjacent layers and its periodicity in the $c$ direction is $2 π/ c$.

cond-mat.str-el↗

arXiv2017

Electron-Phonon Coupling and Surface Debye Temperature of Bi$_2$Te$_3$(111) from Helium Atom Scattering

We have studied the topological insulator Bi$_2$Te$_3$(111) by means of helium atom scattering. The average electron-phonon coupling $λ$ of Bi$_2$Te$_3$(111) is determined by adapting a recently developed quantum-theoretical derivation of the helium scattering probabilities to the case of degenerate semiconductors. Based on the Debye-Waller attenuation of the elastic diffraction peaks of Bi$_2$Te$_3$(111), measured at surface temperatures between $110~\mbox{K}$ and $355~\mbox{K}$, we find $λ$ to be in the range of $0.04-0.11$. This method allows to extract a correctly averaged $λ$ and to address the discrepancy between previous studies. The relatively modest value of $λ$ is not surprising even though some individual phonons may provide a larger electron-phonon interaction. Furthermore, the surface Debye temperature of Bi$_2$Te$_3$(111) is determined as ${\rm Θ}_D = (81\pm6)~\mbox{K}$. The electronic surface corrugation was analysed based on close-coupling calculations. By using a corrugated Morse potential a peak-to-peak corrugation of 9% of the lattice constant is obtained.

cond-mat.mtrl-sci↗

arXiv2016

Reconstruction-induced trefoil knot Fermi contour of Au(111)

Using angle-resolved photoemission spectroscopy (ARPES), we study the effect of the so-called herringbone reconstruction of Au(111) on the dispersion of the free electron-like surface state. While earlier ARPES investigations have only reported a minor interplay of the surface state dispersion and the underlying reconstruction, we show that the uniaxial lattice distortion and the thereby changed reciprocal lattice for the first atomic layer leads to distinct surface state dispersions around the first order reciprocal lattice points of the three domains, creating a constant energy surface resembling a trefoil knot. The findings resolve the long-standing discrepancy between, on one hand, the reconstruction-induced surface state modifications reported in scanning tunnelling microscopy and first principle calculations and, on the other hand, their conspicuous absence in photoemission.

cond-mat.mes-hall↗

arXiv2016

A cumulative approach to quantification for sentiment analysis

We estimate sentiment categories proportions for retrieval within large retrieval sets. In general, estimates are produced by counting the classification outcomes and then by adjusting such category sizes taking into account misclassification error matrix. However, both the accuracy of the classifier and the precision of the retrieval produce a large number of errors that makes difficult the application of an aggregative approach to sentiment analysis as a reliable and efficient estimation of proportions for sentiment categories. The challenge for real time analytics during retrieval is thus to overcome misclassification errors, and more importantly, to apply sentiment classification or any other similar post-processing analytics at retrieval time. We present a non-aggregative approach that can be applied to very large retrieval sets of queries.

cs.IR↗

arXiv2016

Absence of superconductivity in ultra-thin layers of FeSe synthesized on a topological insulator

The structural and electronic properties of FeSe ultra-thin layers on Bi$_{2}$Se$_{3}$ have been investigated with a combination of scanning tunneling microscopy and spectroscopy and angle-resolved photoemission spectroscopy. The FeSe multi-layers, which are predominantly 3-5 monolayers (ML) thick, exhibit a hole pocket-like electron band at \barΓ and a dumbbell-like feature at \bar{M}, similar to multi-layers of FeSe on SrTiO$_{3}$. Moreover, the topological state of the Bi2Se3 is preserved beneath the FeSe layer, as indicated by a heavily \it{n}-doped Dirac cone. Low temperature STS does not exhibit a superconducting gap for any investigated thickness down to a temperature of 5 K.

cond-mat.supr-con↗

arXiv2016

Spin and Valley Control of Free Carriers in Single-Layer WS$_2$

The semiconducting single-layer transition metal dichalcogenides have been identified as ideal materials for accessing and manipulating spin- and valley-quantum numbers due to a set of favorable optical selection rules in these materials. Here, we apply time- and angle-resolved photoemission spectroscopy to directly probe optically excited free carriers in the electronic band structure of a high quality single layer of WS$_2$. We observe that the optically generated free hole density in a single valley can be increased by a factor of 2 using a circularly polarized optical excitation. Moreover, we find that by varying the photon energy of the excitation we can tune the free carrier density in a given spin-split state around the valence band maximum of the material. The control of the photon energy and polarization of the excitation thus permits us to selectively excite free electron-hole pairs with a given spin and within a single valley.

cond-mat.mes-hall↗

arXiv2016

Crystalline and electronic structure of single-layer TaS$_2$

Single-layer TaS$_2$ is epitaxially grown on Au(111) substrates. The resulting two-dimensional crystals adopt the 1H polymorph. The electronic structure is determined by angle-resolved photoemission spectroscopy and found to be in excellent agreement with density functional theory calculations. The single layer TaS$_2$ is found to be strongly n-doped, with a carrier concentration of 0.3(1) extra electrons per unit cell. No superconducting or charge density wave state is observed by scanning tunneling microscopy at temperatures down to 4.7 K.

cond-mat.str-el↗

arXiv2016

Ultrafast Band Structure Control of a Two-Dimensional Heterostructure

The electronic structure of two-dimensional (2D) semiconductors can be significantly altered by screening effects, either from free charge carriers in the material itself, or by environmental screening from the surrounding medium. The physical properties of 2D semiconductors placed in a heterostructure with other 2D materials are therefore governed by a complex interplay of both intra- and inter-layer interactions. Here, using time- and angle-resolved photoemission, we are able to isolate both the layer-resolved band structure and, more importantly, the transient band structure evolution of a model 2D heterostructure formed of a single layer of MoS$_2$ on graphene. Our results reveal a pronounced renormalization of the quasiparticle gap of the MoS$_2$ layer. Following optical excitation, the band gap is reduced by up to $\sim\!$400 meV on femtosecond timescales due to a persistence of strong electronic interactions despite the environmental screening by the $n$-doped graphene. This points to a large degree of tuneability of both the electronic structure and electron dynamics for 2D semiconductors embedded in a van der Waals-bonded heterostructure.

cond-mat.mtrl-sci↗

arXiv2016

Manifestation of nonlocal electron-electron interaction in graphene

Graphene is an ideal platform to study many-body effects due to its semimetallic character and the possibility to dope it over a wide range. Here we study the width of graphene's occupied $π$-band as a function of doping using angle-resolved photoemission. Upon increasing electron doping, we observe the expected shift of the band to higher binding energies. However, this shift is not rigid and the bottom of the band moves less than the Dirac point. We show that the observed shift cannot be accounted for by band structure calculations in the local density approximation but that non-local exchange interactions must be taken into account.

cond-mat.str-el↗

arXiv2016

Band gap engineering by Bi intercalation of graphene on Ir(111)

We report on the structural and electronic properties of a single bismuth layer intercalated underneath a graphene layer grown on an Ir(111) single crystal. Scanning tunneling microscopy (STM) reveals a hexagonal surface structure and a dislocation network upon Bi intercalation, which we attribute to a $\sqrt{3}\times\sqrt{3}R30°$ Bi structure on the underlying Ir(111) surface. Ab-initio calculations show that this Bi structure is the most energetically favorable, and also illustrate that STM measurements are most sensitive to C atoms in close proximity to intercalated Bi atoms. Additionally, Bi intercalation induces a band gap ($E_g=0.42\,$eV) at the Dirac point of graphene and an overall n-doping ($\sim 0.39\,$eV), as seen in angular-resolved photoemission spectroscopy. We attribute the emergence of the band gap to the dislocation network which forms favorably along certain parts of the moiré structure induced by the graphene/Ir(111) interface.

cond-mat.mtrl-sci↗

arXiv2016

Single-layer MoS$_2$ on Au(111): band gap renormalization and substrate interaction

The electronic structure of epitaxial single-layer MoS$_2$ on Au(111) is investigated by angle-resolved photoemission spectroscopy, scanning tunnelling spectroscopy, and first principles calculations. While the band dispersion of the supported single-layer is close to a free-standing layer in the vicinity of the valence band maximum at $\bar{K}$ and the calculated electronic band gap on Au(111) is similar to that calculated for the free-standing layer, significant modifications to the band structure are observed at other points of the two-dimensional Brillouin zone: At $\barΓ$, the valence band maximum has a significantly higher binding energy than in the free MoS$_2$ layer and the expected spin-degeneracy of the uppermost valence band at the $\bar{M}$ point cannot be observed. These band structure changes are reproduced by the calculations and can be explained by the detailed interaction of the out-of-plane MoS$_2$ orbitals with the substrate.

cond-mat.str-el↗