arXiv subjects

Mark Platt

Publications and source records attributed to Mark Platt.

10 recordsLinked to original sources

arXiv2026

Performance of a SuperCDMS HVeV Detector with Sub-eV Energy Resolution and Single Charge-sensitivity

We present a detailed characterization of a new generation of athermal-phonon single-charge sensitive Si HVeV detectors, the best of which achieved 589~meV~$\pm$~5~meV baseline resolution. Our sub-eV energy resolution enables precise measurements of single-photon events and reveal consistent energy losses of 0.92~eV~$\pm$~0.02~eV per charge excitation across two facilities. We demonstrate that the noise for these detectors is well described using a standard Transition Edge Sensor noise model. We also measure a nominal phonon collection efficiency of 45\%~$\pm$~3\%~(stat.)~$\pm$~6\%~(syst.) in the best performing device, establishing these detectors as the most efficient athermal phonon detectors to date, limited only by intrinsic limitations of quasiparticle generation.

physics.ins-det↗

arXiv2024

Low Energy Backgrounds and Excess Noise in a Two-Channel Low-Threshold Calorimeter

We describe observations of low energy excess (LEE) events, background events observed in all light dark matter direct detection calorimeters, and noise in a Transition Edge Sensor based two-channel silicon athermal phonon detector with 375 meV baseline energy resolution. We measure two distinct LEE populations: ``shared'' multichannel events with a pulse shape consistent with substrate athermal phonon events, and sub-eV events that couple nearly exclusively to a single channel with a significantly faster pulse shape. These ``singles'' are consistent with events occurring within the aluminum athermal phonon collection fins. Similarly, our measured detector noise is higher than the theoretical expectation. Measured noise can be split into an uncorrelated component, consistent with shot noise from small energy depositions within the athermal phonon sensor itself, and a correlated component, consistent with shot noise from energy depositions within the silicon substrate's phonon system.

physics.ins-det↗

arXiv2024

A Transition Edge Sensor Operated in Coincidence with a High Sensitivity Athermal Phonon Sensor for Photon Coupled Rare Event Searches

Experimental searches for axions or dark photons that couple to the standard model photon require photosensors with low noise, broadband sensitivity, and near zero backgrounds. Here, we introduce an experimental architecture, in which a small photon sensor, in our case a Transition Edge Sensor (TES) with a photon energy resolution $\sigma_\gamma = 368.4 \pm 0.4$ meV, is colocated on the same substrate as a large high sensitivity athermal phonon sensor (APS) with a phonon energy resolution $\sigma_\mathrm{phonon} = 701 \pm 2$ meV. We show that single 3.061 eV photons absorbed in the photon-sensing TES deposit $\sim$35\% of their energy in the electronic system of the TES, while $\sim$26\% of the photon energy leaks out of the photon-sensing TES during the downconversion process and becomes absorbed by the APS. Backgrounds, which we associate with the broadly observed ``low energy excess'' (LEE), are observed to be largely coupled to either the TES (``singles'' LEE), or phonon system, (``shared'' LEE). At high energies, these backgrounds can be efficiently discriminated from TES photon absorption events, while at low energies, their misidentification as photon events is well modeled. With significant sensitivity improvements to both the TES and APS, this coincidence technique could be used to suppress backgrounds in bosonic dark matter searches down to energies near the superconducting bandgap of the sensor.

physics.ins-det↗

arXiv2024

Measurement of Low Energy Nuclear Recoil Events with the phonon-mediated Voltage-Assisted Hybrid Detector for Rare Event Searches

The phonon-mediated hybrid detector is made out of a monolithic silicon crystal characterized by two interconnected regions linked through a narrow neck. Operating solely on phonon signal measurements, the hybrid design facilitates the differentiation between electron recoil and nuclear recoil events, effectively discerning two types of interaction down to low energy levels. With a newly implemented software triggering technique (SWT), low-energy nuclear recoil events of approximately $500~eV_{ee}$ have been measured. In addition to this, an electron recoil background reduction of up to $95\%$ has been successfully demonstrated.

physics.ins-det↗

arXiv2022

A Stress Induced Source of Phonon Bursts and Quasiparticle Poisoning

The performance of superconducting qubits is degraded by a poorly characterized set of energy sources breaking the Cooper pairs responsible for superconductivity, creating a condition often called ``quasiparticle poisoning". Both superconducting qubits and low threshold dark matter calorimeters have observed excess bursts of quasiparticles or phonons that decrease in rate with time. Here, we show that a silicon crystal glued to its holder exhibits a rate of low-energy phonon events that is more than two orders of magnitude larger than in a functionally identical crystal suspended from its holder in a low-stress state. The excess phonon event rate in the glued crystal decreases with time since cooldown, consistent with a source of phonon bursts which contributes to quasiparticle poisoning in quantum circuits and the low-energy events observed in cryogenic calorimeters. We argue that relaxation of thermally induced stress between the glue and crystal is the source of these events.

physics.ins-det↗

arXiv2022

Snowmass 2021: Superconducting Sensor Fabrication Capabilities for HEP Science

Superconducting sensors are a key enabling technology for many HEP experiments with advances in sensor capabilities leading directly to expanded science reach. The unique materials and processes required for the fabrication of these sensors makes commercial sourcing impractical in comparison with semiconducting devices. Subsequently, the development and fabrication of new sensors are often performed at academic cleanrooms supported through HEP basic detector research and/or project funds. While this operational model has been successful to date, we are at a turning point in the history of superconducting electronics, as evidenced by the rapid growth in the field of quantum computing, when scale and sophistication of these sensors can lead to significant progress. In order to achieve this progress and meet the needs of the next generations of HEP experiments, continued support of all stages of the superconducting sensors development pipeline is necessary.

physics.ins-det↗

arXiv2020

Removal of $^{210}$Pb by Etch of Crystalline Detector Sidewalls

A potential source of dominant backgrounds for many rare-event searches or screening detectors is from radon daughters, specifically $^{210}$Pb, deposited on detector surfaces, often during detector fabrication. Performing a late-stage etch is challenging because it may damage the detector. This paper describes a late-stage etching technique that reduces surface $^{210}$Pb and $^{210}$Po by $>99\times$ at 90% C.L.

physics.ins-det↗

arXiv2019

Single Electron-Hole Pair Sensitive Silicon Detector with Surface Event Rejection

We demonstrate single electron-hole pair resolution in a single-sided, contact-free 1 cm$^2$ by 1 mm thick Si crystal operated at 48 mK, with a baseline energy resolution of 3 eV. This crystal can be operated at voltages in excess of $\pm50$ V, resulting in a measured charge resolution of 0.06 electron-hole pairs. The high aluminum coverage ($\sim$70%) of this device allows for the discrimination of surface events and separation of events occurring near the center of the detector from those near the edge. We use this discrimination ability to show that non-quantized dark events seen in previous detectors of a similar design are likely dominated by charge leakage along the side wall of the device.

physics.ins-det↗

arXiv2017

PubTree: A Hierarchical Search Tool for the MEDLINE Database

Keeping track of the ever-increasing body of scientific literature is an escalating challenge. We present PubTree a hierarchical search tool that efficiently searches the PubMed/MEDLINE dataset based upon a decision tree constructed using >26 million abstracts. The tool is implemented as a webpage, where users are asked a series of eighteen questions to locate pertinent articles. The implementation of this hierarchical search tool highlights issues endemic with document retrieval. However, the construction of this tree indicates that with future developments hierarchical search could become an effective tool (or adjunct) in the mining of biological literature.

cs.IR↗

arXiv2014

Cryogenic Dark Matter Search Detector Fabrication Process and Recent Improvements

A dedicated facility has been commissioned for Cryogenic Dark Matter Search (CDMS) detector fabrication at Texas A&M University (TAMU). The fabrication process has been carefully tuned using this facility and its equipment. Production of successfully tested detectors has been demonstrated. Significant improvements in detector performance have been made using new fabrication methods/equipment and tuning of process parameters.

physics.ins-det↗